Someone helps me to pass a gt modem i9500 .tar.md5 to zip flash to pass it by recovery my phone has the port load bad and i do not have how to pass it for someone odin since the pc does not recognize me the phone and the only way Is passing by recovey.
Related
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
any ideas
or
ROM it should try
roo7_shmali said:
Hi
i have Galaxy Grand dous G531H Stuck on logo
i tried with odin the official firmware From samsung and it's Success But Still stuck on logo
i tried the repair From this page
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
But with 3 BL , CP and CSC it Fail with me
and With AP it Give Wrong
Custom binary blocked by FRP
i tried with rooted ROM but it Fail
i try with kies but i Can't connect to it
Model : SM-G531h/DS
FCC ID: A3LSMG531H
SSN:-G531H/DSGSMH
Click to expand...
Click to collapse
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
naimrlet said:
Download this : https://mega.nz/#!IMFj0CAK!iVB3amQ1vesRuRpDwNHmc8zvUoL3nrPRXq1KanBdJJA
Unzip it
Put it in the AP (in Odin)
If fail then try use the included Odin in the stock ROM zip (but if you can access recovery, please factory reset first)
Click to expand...
Click to collapse
it worked till last second gives me Fail
look at attach file
roo7_shmali said:
it worked till last second gives me Fail
look at attach file
Click to expand...
Click to collapse
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
^^
Before i read your reply i unzip the file and delete Hidden file and i repack to tar file with 7zip
and start with odin and it Give me pass
but when reboot still stuck on logo
after that i tried your way
give me pass but still stuck on logo
naimrlet said:
Extract the stock tar.md5 file.(using winrar or 7zip)
You will see a lot of files with .img at the end of them.
Rename the file "hidden.img" to "hidden.img.tar"
Go to odin and choose AP and find the file "hidden.img.tar" (in the extracted tar.md5 folder)
Click START
After that your device will show the android logo and it will looks like it's updating.
Leave it. Your phone will reboot after that. (If not then turn the phone on manually)
Click to expand...
Click to collapse
any new ideas plz
roo7_shmali said:
any new ideas plz
Click to expand...
Click to collapse
Try using smart switch/kies and then go to "firmware initialization..." and restore your phone there
If not detect click the "reinstall driver" and reconnect your device.
If still not detect maybe you mess up something on your phone...
Still not working?
Hello, I'm not allowed to link to external links but I used Odin with "CF-Auto-Root-hero2lte-hero2ltexx-smg935f.zip" to flash my Samsung Galaxy S7 edge and Odin said "pass". After rebooting it gets stuck at the SAMSUNG logo.
I can hold pwr+home+voldown to get back into the download menu but flashing it again doesn't help either. I'm currently downloading a stock firmware zip file but it's 2 GB and will take some time.
Did I do anything wrong? I believe I followed the steps I had to:
Enabled dev mode.
Enabled OEM unlock.
Rebooted the phone into download mode.
Installed USB drivers for my PC.
Started Odin
Downloaded the "CF-Auto-Root-hero2lte-hero2ltexx-smg935f.zip", extracted it and selected the .md5.tar in "PA" in Odin.
Clicked start.
When it's rebooting I get "RECOVERY IS NOT SEANDROID ENFORCING" but that sounds like gibberish to me... no idea what that's supposed to mean.
is md5.tar file the smallest one of the 2 files in the .zip? I believe you should have used one which is simply .tar, not .md5.tar
solnyshok said:
is md5.tar file the smallest one of the 2 files in the .zip? I believe you should have used one which is simply .tar, not .md5.tar
Click to expand...
Click to collapse
The files in the zip file are "CF-Auto-Root-hero2lte-hero2ltexx-smg935f.tar.md5" and then there's also a copy of an old version of Odin (3.10.x).
You think I need to extra the .md5 file that is inside the .zip? I read some other people considering this and I believe they're only extracting the tar.md5 for curiousity's sake.
Just download and extract the AP file from your correct firmware Patch the AP file with Magisk Connect the phone to your computer and transfer all the firmware files including the patched AP file Then put all the files in the correct slots on odin Substitute the AP file With the patched file Make sure that you uncheck auto reboot And proceed to Flash that's it that's all you have to do you don't even have to hold any special buttons on this model to try to boots to magic rooted just let it boot up regularly that's how easy this model is I already love it
Also...thanks to geiti94 if you want to flash TWRP for a custom recovery you can go here https://forum.xda-developers.com/ga...y-twrp-galaxy-s20-s20-s20-ultra-t4149911/amp/ and its easy as load his version of twrp and flash it from the ap slot
I'm guessing this is for the versions not on US carriers such as US Cellular or Verizon?
Man i did it again i flashed the wrong recovery and put my tab a into "secure check fail" I don't know if it's considered a soft brick or hard one. I've repaired it once before with a binary root tool but I've lost that tool since then. CAN ANYONE HELP?
download an Odin Firmware 4 ya Device, and extract the the "recovery.img.lz4" from the AP File, then download "ZArchiver 4 Mobile" and extract the "recovery.img.lz4" to "recovery.img" now use 7zip to Archive de "recovery.img" to "recovery.img.tar" and start Odin and select this file to "AP" and flash it!!!
it would fix your problem