[Solved] Redmi 4 pro DEAD (apparently no reason) - Xiaomi Redmi 4 Prime Questions & Answers

Yesterday I took off my Redmi 4 pro from my pocket and It didn't boot. It seems dead. I tryed to connect the phone to the charger and I tryed to do the key combinationation to enter in recovery mode but nothing happens...
Even the led doesn't turn on when I connect the charger.
What can I do?

Mich-C said:
Yesterday I took off my Redmi 4 pro from my pocket and It didn't boot. It seems dead. I tryed to connect the phone to the charger and I tryed to do the key combinationation to enter in recovery mode but nothing happens...
Even the led doesn't turn on when I connect the charger.
What can I do?
Click to expand...
Click to collapse
Connect to the charger and wait
Enviado desde mi Redmi 4 mediante Tapatalk

Alvaro03 said:
Connect to the charger and wait
/QUOTE]
Done. Nothing happens. the battery level was at 90% when it bricked and I also tryed to charge it...
Click to expand...
Click to collapse

Mich-C said:
Alvaro03 said:
Connect to the charger and wait
/QUOTE]
Done. Nothing happens. the battery level was at 90% when it bricked and I also tryed to charge it...
Click to expand...
Click to collapse
My phone Dead in my pocket too, but only one time, i just pressed and holded Power button for 10/15 seconds.
If you already try this just open your phone and use test points method and install the stock 8.2.4 official FW with EDL mode
Click to expand...
Click to collapse

I don't know why but after 2 days trying to reboot the phone, it just managed to boot. Again with no reason Problem solved, I hope it wouldn't happen again... maybe the factory rom is bugged...

Mich-C said:
I don't know why but after 2 days trying to reboot the phone, it just managed to boot. Again with no reason Problem solved, I hope it wouldn't happen again... maybe the factory rom is bugged...
Click to expand...
Click to collapse
Man, it's modem bug. When you moving around your city device probably changing cell modes (2g, 3g/+, lte). So when it happens too much device just freezing itself.
Custom ROMs managing to reboot device in this case.
All you have to do is just to press power button for 15 sec or disable 2g at all (*#*#4636#*#*).

Mich-C said:
Yesterday I took off my Redmi 4 pro from my pocket and It didn't boot. It seems dead. I tryed to connect the phone to the charger and I tryed to do the key combinationation to enter in recovery mode but nothing happens...
Even the led doesn't turn on when I connect the charger.
What can I do?
Click to expand...
Click to collapse
connect to the charger and wait some time

Related

X10 not booting!!!

Hey guys!!!Today i turned off my phone for about 2 hours and from then on when i try to switch on the phone, it just vibrates and then nothing happens. When i connected it in flash mode the green LED appeared and immediately disappeared. I am not able to repair it or even flash it!!!!! Can anyone please help!!!!!!
Drdan03 said:
Hey guys!!!Today i turned off my phone for about 2 hours and from then on when i try to switch on the phone, it just vibrates and then nothing happens. When i connected it in flash mode the green LED appeared and immediately disappeared. I am not able to repair it or even flash it!!!!! Can anyone please help!!!!!!
Click to expand...
Click to collapse
Try leaving it on the charger for a few hours.
OmegaRED^ said:
Try leaving it on the charger for a few hours.
Click to expand...
Click to collapse
The phone is not even charging!!!!!!
Drdan03 said:
The phone is not even charging!!!!!!
Click to expand...
Click to collapse
How long did you try leaving it on charge?
OmegaRED^ said:
How long did you try leaving it on charge?
Click to expand...
Click to collapse
Almost 3 hours. The charging LED was not on the whole time!! I assume the phone is not charging??
Drdan03 said:
Almost 3 hours. The charging LED was not on the whole time!! I assume the phone is not charging??
Click to expand...
Click to collapse
ooofff.. that sounds nasty.
You say the green LED is coming ON for a second when it's plugged into the pc.
Are all the ABD and/or flash drivers correctly installed?
I hope it's not a brick.
OmegaRED^ said:
ooofff.. that sounds nasty.
You say the green LED is coming ON for a second when it's plugged into the pc.
Are all the ABD and/or flash drivers correctly installed?
I hope it's not a brick.
Click to expand...
Click to collapse
Yeah!! When i connect it in flash mode the LED stays for a second and then disappears. I did nothing that could possibly brick the phone!!! I just switched off my phone when i was about to start with my exam. After about 2 hours i switched it on and it didn't boot. And by the way when i press the power button a green LED blinks.
Try to take out the battery for a while and try to flash it again.
Another idea is to take out the battery, and while holding the back button on the phone and having the dialogue to put the phone in flash mode in flash tools, first put in the USB cable and then the battery.
Hey guys!!! My phone is back now. I just reflashed it. Thank u everyone for helping me out

Phone won't turn on, no charging indicator

Hey All,
I have bought a used leeco pro 3 off swappa. Unfortunately I didn't get the phone until much later after delivery (had to have someone bring it to me). In photos the phone works fine, but when I got it it won't turn on and there's no indicator that it's charging at all. When I do plug it in, the phone does get warm though.
Any thoughts what the problem could be?
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
sk8223 said:
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
Click to expand...
Click to collapse
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
phillytemptation said:
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
Click to expand...
Click to collapse
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
hearnfar said:
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
Click to expand...
Click to collapse
Tried both, still nothing.
phillytemptation said:
Tried both, still nothing.
Click to expand...
Click to collapse
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Moon75 said:
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
mchlbenner said:
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
When you plug it does it show it charging.
You must push power and volume button at the same time.
Never buy from them.
Sent from my LEX727 using xda premium
phillytemptation said:
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
Click to expand...
Click to collapse
Try use different cable connect phone to computer. For the phone show as Qualcoom HS loader on pc, I just can remember did not format it or anything like that and the phone was fine working again.
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
same problem,dead
i have the same problem i just press the power button with level down(-) audio more than 2 minutes and it boot up. try to press it more than two minutes
rudolph323 said:
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
Click to expand...
Click to collapse
Did you get this working?
mchlbenner said:
Did you get this working?
Click to expand...
Click to collapse
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
rudolph323 said:
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
Click to expand...
Click to collapse
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
rudolph323 said:
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
Click to expand...
Click to collapse
Try holding volume up see if you have fastboot.
Sent from my LEX727 using xda premium
Any help?
Hello, I have very similar problem. My Leeco le pro 3 don't charge I try diffrend cables and chargers but when plug-in only orange diode start to blink. Do you have any other ideas what to try?
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
nocturnoz said:
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
Click to expand...
Click to collapse
Mine is installed the same rom, and today It had the same problem.
mmcarvaxd said:
Mine is installed the same rom, and today It had the same problem.
Click to expand...
Click to collapse
Problem is "solved". I was able to boot inti TWRP and charged from zero to 10%. After that after few trys it was possible to boot into the ROM to charge the battery to 100%.

Xiaomi redmi note 4 3 GB RAM/ 32GB ROM Global version Qualcomm BOOTLOOP

Hello,
I need some help with my phone xiaomi redmi note 4 3/32, since yesterday my phone isn't booting up. I was just scrolling facebook news and then my mobile phone shutdowned for no reason. Now when my phone has 0% battery the led diode is blinking (red color), after some minutes charging the phone it is rebooting multiple times and the red blinking diode disappear. Sometimes it boots into recovery mode, sometimes into fastboot mode, but immediately after 1-2 seconds it reboots again and i can't even wipe cache or something, same with fastboot, when my device boots into fastboot it immediately after 5 seconds get rebooted again. Yesterday my phone was doing this for about 8 hours (I let it charge, now I don't cuz it's annoying) . The phone doesn't have root or unlocked fastboot. 0 modifications.
Plug in charger and hold power button till Screen goes blank.
hoshang.govil12 said:
Plug in charger and hold power button till Screen goes blank.
Click to expand...
Click to collapse
My phone will automatically boot into miui logo and then the reboots continue again.
Try Flashing via Flastboot. Or access battery and charge externally.
hoshang.govil12 said:
Try Flashing via Flastboot. Or access battery and charge externally.
Click to expand...
Click to collapse
I have already tried, because I don't have unlocked bootloader it doesn't work. I can't flash stock rom via miflash, even EDL mode isn't working (fastboot oem edl command).
Try removing Battery and Charge it with external Charger and put back. Or Service center is only solution.
hoshang.govil12 said:
Try removing Battery and Charge it with external Charger and put back. Or Service center is only solution.
Click to expand...
Click to collapse
Yes, i took it away to service center.
romanpesta said:
Yes, i took it away to service center.
Click to expand...
Click to collapse
Good. Hope all Fine now.
hoshang.govil12 said:
Good. Hope all Fine now.
Click to expand...
Click to collapse
They told me that the device will be in their service center for 2-3 weeks Hope i I will not pay any money
If it's in warranty, it's free.

Mi A1 hard bricked !!!

Hello everyone,
My mi a1 is having serious issue it is not responding to anything No led blinking, Unable to enter into fastboot mode , tried getting into EDL mode via test points but no response and mobile is not showing any sign of life.
This condition is happened when i connected my A1 to a fast charger. There is no issue when charging via fast charger as the battery condition was not good. The problem is when the electricity is gone the mobile switches on and off and that’s what happen.
Note :- There is no hardware issue as i got it checked by mobile repairing center. He said that there is a software issue.
Please help me
Keep the phone for charging using the original charger for about half-to-one hours. Then boot it by pressing the Vol Down + Power key while keeping the charger connected. See if this makes any difference.
DJBhardwaj said:
Keep the phone for charging using the original charger for about half-to-one hours. Then boot it by pressing the Vol Down + Power key while keeping the charger connected. See if this makes any difference.
Click to expand...
Click to collapse
It didn’t work
Manish3842 said:
It didn’t work
Click to expand...
Click to collapse
IMO, if it was a software issue, your phone might have shown some sign of life, like a vibration or the notification LED blinking when connected to the wall charger or to the PC via USB.
Manish3842 said:
It didn’t work
Click to expand...
Click to collapse
You really already tried that exact process?
Because you replied after 20 minutes.
kudos1uk said:
You really already tried that exact process?
Because you replied after 20 minutes.
Click to expand...
Click to collapse
Also tried 2 more times after that day no sign of life

Poco M3

I switch off my poco m3 at 66% and it would turn on already try to force restart it still doesn't work, I saw some solutions about letting the battery drain but how do I do that
What happened? Can your phone boot into system?
LR7875 said:
What happened? Can your phone boot into system?
Click to expand...
Click to collapse
I don't have a system to dry it with, I switch it off before going to bed about 2 days ago still hasn't turned l
On, It seems various people have been having a problem with there Xiaomi poco m3
ArcherXY said:
I don't have a system to dry it with, I switch it off before going to bed about 2 days ago still hasn't turned l
On, It seems various people have been having a problem with there Xiaomi poco m3
Click to expand...
Click to collapse
Yeah. There are several Poco m3s bricked just on XDA.
ArcherXY said:
I don't have a system to dry it with, I switch it off before going to bed about 2 days ago still hasn't turned l
On, It seems various people have been having a problem with there Xiaomi poco m3
Click to expand...
Click to collapse
So you switched it off and it never turned on again?
Yeah pretty much
LR7875 said:
So you switched it off and it never turned on again?
Click to expand...
Click to collapse
Ah
What if you plug it into your computer
ArcherXY said:
I switch off my poco m3 at 66% and it would turn on already try to force restart it still doesn't work, I saw some solutions about letting the battery drain but how do I do that
Click to expand...
Click to collapse
Here's what worked for me.
First open the back of your phone.
Second disconnect the battery cable.
Third start holding the power button.
Fourth connect the battery cable while holding the power button.
If you don't get it on your first try you'll have to try these steps again.
MiniSniper said:
Here's what worked for me.
First open the back of your phone.
Second disconnect the battery cable.
Third start holding the power button.
Fourth connect the battery cable while holding the power button.
If you don't get it on your first try you'll have to try these steps again.
Click to expand...
Click to collapse
Thanks alot, it's seems this affected alot of people
LR7875 said:
What if you plug it into your computer
Click to expand...
Click to collapse
don't have one to try it with
ArcherXY said:
Thanks alot, it's seems this affected alot of people
Click to expand...
Click to collapse
Also forgot to mention do not restart your phone or you will have to do the same steps again.
MiniSniper said:
Also forgot to mention do not restart your phone or you will have to do the same steps again.
Click to expand...
Click to collapse
Yeah, I also saw a video to a more permanent solution but I haven't tried it so I don't really know
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "​Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
bjsalcedo10 said:
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "​Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
Click to expand...
Click to collapse
Noice!
Would try that later if my m3 goes rogue again and Im too lazy to open the backcase.Its been almost half a month that I kept my phone running and I just found out that my flashlight suddenly wont work and my themes keep reverting to the standard out of the box theme.Maybe it I should restart it to fix this as I have been through it on my old Xiaomi MiA1,same flashlight gone error after a long time usage without once restarting it.
Thanks for sharing this method!
bjsalcedo10 said:
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "​Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
Click to expand...
Click to collapse
Just start wireless, bluetooth, Google Map and GPS always on, music player, video player, screen always on at max brightness, that will drain the battery in 8 hours
mobnoob said:
Just start wireless, bluetooth, Google Map and GPS always on, music player, video player, screen always on at max brightness, that will drain the battery in 8 hours
Click to expand...
Click to collapse
Yeah cool except the phone doesn't boot in the first place.
bigpeepum said:
Yeah cool except the phone doesn't boot in the first place.
Click to expand...
Click to collapse
Try to rubber band method to drain the battery(this method is applicable when your phone has no display or not booting)
bjsalcedo10 said:
Try to rubber band method to drain the battery(this method is applicable when your phone has no display or not booting)
Click to expand...
Click to collapse
Does the rubberband method effectively work? I'm doubtful.

Categories

Resources