I recently recovered my phone from bootloop:laugh::laugh:...........
[ FIRMWARES CAN BE DOWNLOADED HERE
https://firmwarefile.com/lenovo-vibe-k5-plus-a6020a46
IF YOU WANT VOLTE UPDATE DOWNLOAD THE FIRMWARE WHICH IS LIKE S105]
TO FLASH first of all try the method given in this in this link
https://forum.xda-developers.com/k5-plus/how-to/unbrick-vibe-k5-plus-qfil-qpst-method-t3467830
If that does not work[remember that NOT TO UNINSTALL THE SOFTWARES AND DRIVERS INSTALLED FOR ABOVE METHOD],as in my case,try the method provided in this link [BEFORE USING THIS METHOD DISABLE UNSIGNED DRIVER ENFORCEMENT IN YOUR PC.IF YOU ARE UNAWARE OF THIS TRY THIS LINK
https://www.drivereasy.com/knowledge/solved-windows-requires-a-digitally-signed-driver/ ]
https://androidmtk.com/use-lenovo-downloader-tool
if even this doesnot work,we have to use both of these to flash........
and this is what i've done
1. Repeat the first method as it is until you get sahara fail/qh loader fail and then close qfil/qpst without removing your phone.
2.Now repeat the second method[NOW THERE IS NO NEED OF INSTALLING ANY DRIVERS. BECAUSE THEY ARE ALREADY INSTALLED.DIRECTLY OPEN LENOVO DOWNLOADER TOOL AND FLASH IT]
THAT'S IT YOUR FLASHING IS DONE
if you have any queries you can ask
how to flash stock ROM by Lenovo downloader tool...steps pls..
hbtkmr said:
how to flash stock ROM by Lenovo downloader tool...steps pls..
Click to expand...
Click to collapse
\
In this link https://firmwarefile.com/lenovo-vibe-k5-plus-a6020a46[Which I've Already provided],
you will find follow tutorial below a firmware.
I started flashing using Lenovo downloader tool,but it stuck at flashing..........it was like that for 15 minutes......
hbtkmr said:
I started flashing using Lenovo downloader tool,but it stuck at flashing..........it was like that for 15 minutes......
Click to expand...
Click to collapse
Repeat for several times.
If it doesnot work try different lenovo downloader tool or other firmware.
If it even doesnot help you,complete reading my thread(Did you read my thread completely?)
Related
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
query
I am also having the same problem......
can anyone help?
please plesae
vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution
lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
SAME same seems like there is no help out there and we might have to use our phones as paperweight!
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".
Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot
Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot
BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img
My phone does not reboot
batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution
kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk
After updating to M, the device is stuck at bootanimation. The stock recovery is not working either.
How can I fix it? The phone is not being detected by SP flash tool either. I have installed drivers.
Can anyone please help me out. I have almost no experience with mtk devices.
Subhrajyoti Sen said:
After updating to M, the device is stuck at bootanimation. The stock recovery is not working either.
How can I fix it? The phone is not being detected by SP flash tool either. I have installed drivers.
Can anyone please help me out. I have almost no experience with mtk devices.
Click to expand...
Click to collapse
androidmtk.com
You can find lava pixel v1 lollipop 5.1 ROM there.
It include sp flash tool and sn write tool also.
Make a clean flash using sp flash tool.
Then write imei to mobile using sn write tool.
The only thing I can successfully do with odin is flash the bootloader. I have the full firmware file, but whenever I try flashing anything but the bootloader, FRP Lock blocks it or it fails in odin. I know the exact reason that the phone is bricked, my OEM Unlock setting in developer settings got turned off and I have a rooted binary, so now whenever it trys to boot up, a little red message shows up in the top left for the first few seconds of boot, then the phone shuts off completely. No other thread provides any solution for my situation. Odin wont flash any firmware and I cant get into TWRP anymore as well. Does anyone know what to do? I have a replacement coming from T Mobile in a few weeks but I want to try and fix this thing.
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
what and where to find scatter file?
Farzad37 said:
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
Click to expand...
Click to collapse
I think this is very helpful to my situation.....but what is a scatter file as oppossed to the stock firmware....and is it something I can extract or get from the stockfirmware.zip? I have a samsung On5 (sm-g550t) thats bricked...thanks in advance!
Farzad37 said:
In first use srktool and if does not work use sp flashtool and download on5 scatter files for flash
sent from Farzad's mate
Click to expand...
Click to collapse
That's for mtk devices only, and will probably brick op's device even more
Retry Kies.
In the back of phone under battery look for make name (Sould look like SM-G5xxxx) and S/N
Make copy on windows txt file
Boot phone into Download Mode but dont plug into usb yet.
Open Kies on Windows select tools, then firmware upgrade and initialization. Enter your make click ok then enter your S/N click ok. Plug phone into usb and keep clicking ok untill you see downloading firmware
While flashing pixel experience plus rom, the device did not boot up correctly causing a google loading screen which did not change even after an hour. At that time i realised that the rom didn’t flash correctly, or the rom might have some faults. So I rebooted my mobile in custom recovery mode to flash the stock rom, but it did not complete the flash, it generated error 7. So I tried to install havoc rom and I encountered the same problem. Not just that I have tried installing at least 5 rom which gives me the same problem. I can’t even flash my recovery rom. It generates the same errors which include error 7 and invalid zip file. So I tried solving this problem by unzip the rom and editing the assert script and re zipping the file, and I encounter the same errors. I have even tried using a different custom recovery like TWRP and red wolf (latest updated version), but I face the same errors. The mobile has no os installed and it doesn’t allow me to install any rom. It only allows me to install stock recovery and other custom recovery by using Fastboot mode. I have tried add sideload through the custom recovery and the mobile gets detected, but it gives the same errors.
So I tried using QFIL application as the mobile was a Qualcomm device. The mobile gets detected as 9008. And I tried to download the program files on the mobile, but then it gives me a Sahara fail error.
I have tried to do it multiple times and I end up getting the same error.
The device has a unlocked boot loader but it was never rooted.
Please help me.
Can’t post it in the developer forum for this device as I don’t meet the requirements for posting it
i.am.the.best said:
While flashing pixel experience plus rom, the device did not boot up correctly causing a google loading screen which did not change even after an hour. At that time i realised that the rom didn’t flash correctly, or the rom might have some faults. So I rebooted my mobile in custom recovery mode to flash the stock rom, but it did not complete the flash, it generated error 7. So I tried to install havoc rom and I encountered the same problem. Not just that I have tried installing at least 5 rom which gives me the same problem. I can’t even flash my recovery rom. It generates the same errors which include error 7 and invalid zip file. So I tried solving this problem by unzip the rom and editing the assert script and re zipping the file, and I encounter the same errors. I have even tried using a different custom recovery like TWRP and red wolf (latest updated version), but I face the same errors. The mobile has no os installed and it doesn’t allow me to install any rom. It only allows me to install stock recovery and other custom recovery by using Fastboot mode. I have tried add sideload through the custom recovery and the mobile gets detected, but it gives the same errors.
So I tried using QFIL application as the mobile was a Qualcomm device. The mobile gets detected as 9008. And I tried to download the program files on the mobile, but then it gives me a Sahara fail error.
I have tried to do it multiple times and I end up getting the same error.
The device has a unlocked boot loader but it was never rooted.
Please help me.
Click to expand...
Click to collapse
1. 1st try to flash fastboot rom,
after install fastboot rom if the phone stuck on asus logo or any other error then
2.Try to install Qfll file (select ww_no_fsg.xml file) after successful installation , boot your phone.
3. again connect your phone fastboot mode and flash fastboot rom
If every installation is successfully done then i am sure that your phone is boot properly in stock rom with lock bootloader.
because I faced same issue,
remember 1st try to install stock fastboot rom and then try to flash Qfil files
Wish you good luck :good:
Try flashing fw063 before flashing your custom rom.(that fixed for me)
if it didn't work try this (rooted):-
https://forum.xda-developers.com/showthread.php?t=2522762
Thanks bro. I have successfully unbricked my mobile
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
miki666643 said:
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
Click to expand...
Click to collapse
HI, how do you have fixed? Please explain me....
dave21272 said:
HI, how do you have fixed? Please explain me....
Click to expand...
Click to collapse
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
miki666643 said:
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
Click to expand...
Click to collapse
Thanks!!! I try now!!!!
Can I flash if my pc recognized Coolpad Android Bootloader Interface wirh YGDP tool?
Great!!!!!!!!!!
my coolpad is alive !!!!!!!
The password for rar MEGA is : coolpadJUI2017
first flash init.cpb
second flash rom.cpb
and your phone is turn on !!!!!!!!!!!
yea exactly
However, I have another way.
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Add a rom into the unzip folder.
7.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
8.It should boot up.