Related
Flashed a new ROM pure nexus currently but my system always says when I reboot my phone that that plss flash a latest vendor .img to the system but I didn't found any .IMG file on google
My device :- Nexus 6P(64 GB)
My security patch :- 1march 2016
Build version :- MHC19J
Build date :- 15march 2016
Do I ingore this message if not what I do can't message to developer due to less than 10 post
The Vendor Image will be found in the zip file you would download from Google. In your case, I am assuming you made a typo and meant build MHC19I
Link here:
https://dl.google.com/dl/android/aosp/angler-mhc19i-factory-fb2128bf.tgz
Extract that archive file, then extract this zip file image-angler-mhc19i.zip. That contains the vendor.img file you need.
Buddy it's MHC19J only
Mohit M'S said:
Flashed a new ROM pure nexus currently but my system always says when I reboot my phone that that plss flash a latest vendor .img to the system but I didn't found any .IMG file on google
My device :- Nexus 6P(64 GB)
My security patch :- 1march 2016
Build version :- MHC19J
Build date :- 15march 2016
Do I ingore this message if not what I do can't message to developer due to less than 10 post
Click to expand...
Click to collapse
You need to flash the correct corresponding vendor image for the build that the ROM is based on. I have vendor images in my index here:
http://forum.xda-developers.com/nexus-6p/general/index-huawei-nexus-6p-t3213583
There is no MHC19J build for this phone though, I'm guessing you mean MHC19I? You can flash it with fastboot:
Code:
fastboot flash vendor vendor.img
Or you can flash it with TWRP, go into the install menu, select "install image" in the bottom-right corner, then navigate to the file on your phone and select it, then select the correct partition to flash it to (vendor).
EDIT: Do you have the Nexus 5X? MHC19J is a build number for that device. If so, disregard my advice above and head to the Nexus 5X section.
Mohit M'S said:
Flashed a new ROM pure nexus currently but my system always says when I reboot my phone that that plss flash a latest vendor .img to the system but I didn't found any .IMG file on google
My device :- Nexus 6P(64 GB)
My security patch :- 1march 2016
Build version :- MHC19J
Build date :- 15march 2016
Do I ingore this message if not what I do can't message to developer due to less than 10 post
Click to expand...
Click to collapse
Twrp 3.0.0-1 allows vendor.imgs to be flashed to vendor partition. You can flash twrp with the app flashify in the play store.
I am trying to install an update for 7.0. I have twrp and root (supersu) installed. When I download and restart, it boots into twrp. I can't find the image. How do I update my phone?
Thee are two methods:
I Method
1. Download system image - I know it's a large file,
2. Unzip package and then unzip image-angler-xxx ZIP file
3. Flash via fastboot system and vendor images
4. Done.
II Method
1. Download OTA zip
2. Instal FlashFire
3. Open appa and hit + button
4. Choose "Flash firmware package"
5. Chose same images like in method I
6. Hit flash and You're done
Choosing/flashing other images can factory reset device and restore default recovery, depending which images You'll chose
downloading from here: https://developers.google.com/android/nexus/ota
Will this wipe my phone when I flash it?
Is there a way to install the update without loosing all of my data and apps?
And in the app, when I choose the zip, do I select the boot and modem firmware checkboxes?
Flashing the OTA Zip file will not overwrite your data and apps if you don't flash the userdata.img file
For some reason it is failing to install the update using FlashFire. How do I find out why?
adam_pl said:
Thee are two methods:
I Method
1. Download system image - I know it's a large file,
2. Unzip package and then unzip image-angler-xxx ZIP file
3. Flash via fastboot system and vendor images
4. Done.
II Method
1. Download OTA zip
2. Instal FlashFire
3. Open appa and hit + button
4. Choose "Flash firmware package"
5. Chose same images like in method I
6. Hit flash and You're done
Choosing/flashing other images can factory reset device and restore default recovery, depending which images You'll chose
Click to expand...
Click to collapse
you forgot bootloader image which was actually updated in the last OTA...
Sent from my Nexus 6P using XDA-Developers mobile app
Which bootloader do I select in flashfire? primary and secondary are greyed out. there is trustzone (bootloader.tz.img), dbi/sdi (bootloader.sdi.img), and several others.
rchtk said:
you forgot bootloader image which was actually updated in the last OTA...
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
I noticed that latter, cause when I was writing this I haven't updated my 6P. So my question is - can I just flash new BL without any risk?
adam_pl said:
I noticed that latter, cause when I was writing this I haven't updated my 6P. So my question is - can I just flash new BL without any risk?
Click to expand...
Click to collapse
Sure. The recommended way to flash BL is to use manual fastboot.
sniper8752 said:
Which bootloader do I select in flashfire? primary and secondary are greyed out. there is trustzone (bootloader.tz.img), dbi/sdi (bootloader.sdi.img), and several others.
Click to expand...
Click to collapse
* BUMP *
Hi all, I posted this in the 6P bootloop thread, but didn't get a response. As that is a pretty LONG thread, i'm thinking my question may have gotten lost in the jumble.
Quick run down.
A few months back my 6P started the BLOD. I found the fix listed on these pages, applied it, and have been happily using my phone ever since. Phone is bone stock 7.1.2 other than the TWRP recovery and the modified EX kernel for 4 cores.
Since the fix, my phone FINALLY got the OTA update to go to Android 8.0 and i obviously want to get it done. My concern is HOW to do this without causing more headache.
Can anyone point me in the right direction? Should i use the OTA update or download the factory image from Google?
I've got some knowledge as i used to be into the "rooting" scene back in the day, but haven't for a while, so i feel a little lost.
Thanks for any help.
johnnyphive said:
Hi all, I posted this in the 6P bootloop thread, but didn't get a response. As that is a pretty LONG thread, i'm thinking my question may have gotten lost in the jumble.
Quick run down.
A few months back my 6P started the BLOD. I found the fix listed on these pages, applied it, and have been happily using my phone ever since. Phone is bone stock 7.1.2 other than the TWRP recovery and the modified EX kernel for 4 cores.
Since the fix, my phone FINALLY got the OTA update to go to Android 8.0 and i obviously want to get it done. My concern is HOW to do this without causing more headache.
Can anyone point me in the right direction? Should i use the OTA update or download the factory image from Google?
I've got some knowledge as i used to be into the "rooting" scene back in the day, but haven't for a while, so i feel a little lost.
Thanks for any help.
Click to expand...
Click to collapse
Well, for starters do NOT take the OTA. It will either fail or boot loop your phone. Due to the fact you have a modified boot.img you will need to update manually using fastboot with the full image. Re-apply the modified kernel after you finish updating the partitions, but BEFORE booting the first time. You can follow most guides on how to manually update a full image using fastboot, just add the step of flashing the modified kernel before booting.
Thanks for the reply and the help. If i could ask for a little more help, as this is my only phone.
Can you explain the difference between the modified boot.img and the modified kernel?
If i download the factory image from here (https://developers.google.com/android/images) is it ok to the get the latested one (Nov 2017) or do i need to get the original one (Sep 2017 as i'm on Fi)
Once i flash the factory image, is it going to replace the modified boot image as well as the modified kernel?
Follow the OP on this thread (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) in the downloads section there appear to be 2 files i would need, the "Boot.img from stock 6.17, 8.0 firmware" and "EX kernel version 5.03". Am i understanding that correctly?
Like i said, this is my only phone, and i'm probably just being overly paranoid about bricking it, but any clarification would be greatly appreciated.
johnnyphive said:
Thanks for the reply and the help. If i could ask for a little more help, as this is my only phone.
Can you explain the difference between the modified boot.img and the modified kernel?
If i download the factory image from here (https://developers.google.com/android/images) is it ok to the get the latested one (Nov 2017) or do i need to get the original one (Sep 2017 as i'm on Fi)
Once i flash the factory image, is it going to replace the modified boot image as well as the modified kernel?
Follow the OP on this thread (https://forum.xda-developers.com/nexus-6p/general/guide-fix-nexus-6p-bootloop-death-blod-t3640279) in the downloads section there appear to be 2 files i would need, the "Boot.img from stock 6.17, 8.0 firmware" and "EX kernel version 5.03". Am i understanding that correctly?
Like i said, this is my only phone, and i'm probably just being overly paranoid about bricking it, but any clarification would be greatly appreciated.
Click to expand...
Click to collapse
Use the latest November image. The boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. When you flash the new boot.img contained in the Google image, it will overwrite the patched kernel. You then need to re-patch it by installing EX kernel before booting. EX writes to (modifies) the stock boot.img. There are also pre-modifed boot.img files floating around. You will probably get more detailed help in the dedicated thread. Learning to flash manually (or remember how) is not really a big deal and a necessary skill for modding (and for getting yourself out of trouble). Good luck. :good:
v12xke said:
Use the latest November image. The boot.img contains the kernel and ramdisk, critical files necessary to load the device before the filesystem can be mounted. When you flash the new boot.img contained in the Google image, it will overwrite the patched kernel. You then need to re-patch it by installing EX kernel before booting. EX writes to (modifies) the stock boot.img. There are also pre-modifed boot.img files floating around. You will probably get more detailed help in the dedicated thread. Learning to flash manually (or remember how) is not really a big deal and a necessary skill for modding (and for getting yourself out of trouble). Good luck. :good:
Click to expand...
Click to collapse
Ok, so 1 last time (sorry)
1 - Downloaded the latest 8.0.0 factory image from google (this contains the bootloader, radio, and partitions (.zip).
2 - Get phone to fastboot and apply the above 3 new images
3- before rebooting, flash oreo4core (new, modified boot.img), TWRP recovery.img
4- reboot to recovery (TWRP) and apply the modified EX kernel
5 - reboot and (hopefully) profit
Am i missing anything, or doing anything that isn't needed?
johnnyphive said:
Ok, so 1 last time (sorry)
1 - Downloaded the latest 8.0.0 factory image from google (this contains the bootloader, radio, and partitions (.zip).
2 - Get phone to fastboot and apply the above 3 new images
3- before rebooting, flash oreo4core (new, modified boot.img), TWRP recovery.img
4- reboot to recovery (TWRP) and apply the modified EX kernel
5 - reboot and (hopefully) profit
Am i missing anything, or doing anything that isn't needed?
Click to expand...
Click to collapse
<<Disclaimer: I don't use the 4 core kernel, so I don't know if it comes with installer script or someone has just modified the latest boot.img>> Unzip the "partitions" zip you refer to and extract those image files to the same folder as bootloader and modem. For example, you can keep TWRP recovery if you don't flash the recovery.img. That is how you preserve your custom recovery. So in other words you'll now have a folder (your ADB folder?) with 5 image files.... bootloader, radio, boot, system, and vendor all in one folder. <<Note: it is my understanding you just substitute the latest oreo4core file (should be boot.img?) If this is true, copy that file into your ADB folder and let it overwrite the stock boot.img. Stop. Copy over flash-all.bat, change the *.bat extension to *.txt and open in notepad. You will see (and can copy/paste) the fastboot commands to get you started with bootloader and radio. Then flash the last 3 (boot, system, vendor). At this point you can reboot into the OS. Since you substituted the oreo4core boot.img file for the stock boot.img there is no need to use TWRP to flash anything. That and since you skipped flashing the recovery.img, TWRP is still there.
v12xke said:
<<Disclaimer: I don't use the 4 core kernel, so I don't know if it comes with installer script or someone has just modified the latest boot.img>> Unzip the "partitions" zip you refer to and extract those image files to the same folder as bootloader and modem. For example, you can keep TWRP recovery if you don't flash the recovery.img. That is how you preserve your custom recovery. So in other words you'll now have a folder (your ADB folder?) with 5 image files.... bootloader, radio, boot, system, and vendor all in one folder. <<Note: it is my understanding you just substitute the latest oreo4core file (should be boot.img?) If this is true, copy that file into your ADB folder and let it overwrite the stock boot.img. Stop. Copy over flash-all.bat, change the *.bat extension to *.txt and open in notepad. You will see (and can copy/paste) the fastboot commands to get you started with bootloader and radio. Then flash the last 3 (boot, system, vendor). At this point you can reboot into the OS. Since you substituted the oreo4core boot.img file for the stock boot.img there is no need to use TWRP to flash anything. That and since you skipped flashing the recovery.img, TWRP is still there.
Click to expand...
Click to collapse
Thank for the help! Everything seems to be up and running. I know you said you don't use the "4 cores" (can only assume your either on a different phone or yours isn't affected by the BLOD), but do you know if i still need to apply the EX kernel update, or know of a way to tell if it's already been applied?
Thanks again for all the help. I was pretty much in the right direction, but being as how i'd been away from it for a while, i wanted some backup
johnnyphive said:
Thank for the help! Everything seems to be up and running. I know you said you don't use the "4 cores" (can only assume your either on a different phone or yours isn't affected by the BLOD), but do you know if i still need to apply the EX kernel update, or know of a way to tell if it's already been applied? Thanks again for all the help. I was pretty much in the right direction, but being as how i'd been away from it for a while, i wanted some backup
Click to expand...
Click to collapse
I don't think you can flash EX kernel from now on. I think you have to use a modded boot.img that will contain his kernel/ramdisk. This is my guess. You really should be getting your information in the dedicated thread where everyone is actually installing and using it. Google "oreo 4 core" and you will find the XDA thread is the first hit. Good luck. :good:
[DEPRECATED] no longer working on due to real life issues. [DEPRECATED]
Please feel free to use my post and work on it yourselves, sorry.
Nexus 5x BLOD fix (OPM2.171019.029)​
I recently purchased a Nexus 5x from ebay; it had the BLOD issue and, after many days I managed to fix it.
So I have decided to update the boot image to the 'latest' android factory image; this will allow people who have applied the patch to use a later version of Android or a custom ROM.
A huge thanks to @XCnathan32 for the original fix!
The steps below will wipe all data from your device!
For Rooting Information and Google Pay fix, see 2nd post.
Changelog
​02/05/2018 - Updated method and added custom ROM method.
​01/05/2018 - Updated TWRP from version 3.1.1.0 to 3.2.1-0.
What does this do?
There are two versions;
The first process will install the 'newest' stock version of Android onto your device; it will then install a custom recovery, and finally flash the updated boot.img file.
The boot.img has been modified slightly to only use 4 out of the 6 cores on the processor, this fixes the overheating issue with the Nexus 5x devices.
The other version is similar except using a custom version of Lineage OS.
Instructions
For detailed instructions and more info please visit the original thread.
Please make sure to have all of the downloaded file ready.
First Method - Stock Image
1. Boot into fastboot mode.
2. Extract factory image zip file and go into its directory.
3. With the phone in fastboot mode and connected the computer, open 'flash-all.bat'.
​3a. Let the process finish; the device will reboot.
4. Go back into fastboot mode.
​4a. [optional] you may wish to flash a custom recovery. If so move into the directory where you have the custom image downloaded. follow step 6a and type in
Code:
fastboot flash recovery [filename].img
5. Now move into the directory in which you downloaded the boot.img file.
6. Once inside; shift-right-click in the file manager and select 'open in powershell' or 'open in cmd'
7. Once the command window has opened: type in
Code:
fastboot flash boot boot.img
8. Now reboot the device!
Second Method - Custom ROM
1. Boot the device into fastboot mode
2. Download the ROM [linked below].
3. Download the GAPPS package [linked below].
4. Download Magisk [linked below].
5. Download the stock factory image; this is important as it contains the newest version of the bootloader, radio and vendor images, which is needed for Lineage to work [linked below].
6. Extract the stock factory image and go into it’s directory.
​6a. There should be a file called ‘flash-all.bat’ - double-click to run it (Make sure phone is plugged in and in fastboot mode!).
​6b. Let the process finish; the device should reboot.
7. Once the device has rebooted, again make sure it’s in fastboot mode.
8. Now download the custom version of TWRP; go into it’s directory then shift-right-click and select ‘open with cmd’ or ‘open with powershell’.
9. Then type the following:
Code:
fastboot flash recovery [filename].img
10. Once that process has finished (it should only take a sec), boot into recovery mode by selecting it via the volume up & down keys; the using the power button to select.
11. Once in recovery;
​11a. Copy and paste the ROM zip archive, Magisk and the GAPPS package to the phone. You should be able to view your phone in the file explorer. If not please install the adb & fastboot drivers.
​11b. Once done; go to ‘Install’ -> the select the zip file you transfered. It will now ask you to confirm, drag the bar across to accept the flash.
12. The ROM will now be flashing; leave it until it is done!
13. Once that process has finished; go back into the install section.
​13a. Now you need to flash the GAPPS package.
14. Once the GAPPS has finished flashing; you now need to flash Magisk. This allows you to root your device and use services like Google Pay.
15. Now reboot!
If all is good then the device will reboot. You should see a boot animation (This can take up to 30 mins, so please wait!), after you should now see the android setup process.
Downloads
The fixed boot image can be downloaded from here.
The factory image: please make sure the version you are downloading matches the updated boot images'. It can be found here.
Modified Lineage OS ROM (boot image updated to the fix); it can be found here.
Magisk -> here.
GAPPS -> here. (Download for ARM64).
A fixed version of TWRP created by @XCnathan32 and updated by me to work with the 4-core boot image. Download Here.
Disclaimer
I will not be held responsible for anyone that decides to proceed with the steps listed above. If there are any issues please post them below with as much detail as you can. I will try my best to answer them, but I do have real-life stuff to deal with.
The original mod was not created myself! I have simply updated it.
Rooting info & Google pay fix
Rooting info & Google Pay fix​Flashing Magisk after ROM will allow you to have root privileges and will also allow you to use
Magisk: it's HERE
My phone has bootloader locked. Is it needed?
lollazzo said:
My phone has bootloader locked. Is it needed?
Click to expand...
Click to collapse
Unfortunately, it is required so that you can flash the images. If you can't turn the device on then try the steps linked below;
https://forum.xda-developers.com/nexus-5x/general/untested-nexus-5x-bootloop-death-fix-t3641199
Goto the "*If your phone is bootloader locked/OEM locked:" section, I had the same issue and freezing my phone for 15 mins worked great.
Might work for you to
could you please fix the link to the Modified Lineage OS ROM.
thank you
deoneR said:
could you please fix the link to the Modified Lineage OS ROM.
thank you
Click to expand...
Click to collapse
Fixed it sorry for the wait; was busy with college etc.
if i do all your steps for the second method i always get a reboot to TWRP after ~ 3mins
what am i doing wrong?
deoneR said:
if i do all your steps for the second method i always get a reboot to TWRP after ~ 3mins
what am i doing wrong?
Click to expand...
Click to collapse
Try following method #1 first, then If you want; flash the custom ROM etc.
The custom ROM I provided works for me so I'm not 100% sure why it's not working. Trying the first method may help :|
lollazzo said:
My phone has bootloader locked. Is it needed?
Click to expand...
Click to collapse
Freezing did not worked for me , I put mine the oven and heated it to about 60 Grad Celsius.
That even gave me enough time to back up my data .
however, is back to live because of this tread.
Thanks.
This is the clear and simple instructions that always make things work first try! Thank you so much!
For June 5th security update I managed to work with those instructions, works perfect with making my own 4 core boot image and recovery.
http://aurelio.net/articles/nexus-5x-bootloop-fix.html
First fix that actually brought my phone back to life
Wow, amazing job, thank you very much! I tried many other methods to fix my device, and some allowed me to boot back into my phone, but I encountered errors like my wifi died etc. So I thought it was the end for my device and it turned into a very expensive USB flash drive lol. I don't know how your fix differs from the other ones on xda ( I used the first method), but it worked for me. So thanks again!
Something happened to my phone today. Its running 8.1 Pixel rom with the bload fix applied. All of a sudden my phone turned off today after running fine from so many months with blod fix. Now it doesn't boot. Google logo and turns off. Not even recovery is working (TWRP 4 core, patched). Can anyone suggest what's wrong?
Dragon's Fedora said:
Nexus 5x BLOD fix (OPM2.171019.029)​
I recently purchased a Nexus 5x from ebay; it had the BLOD issue and, after many days I managed to fix it.
So I have decided to update the boot image to the 'latest' android factory image; this will allow people who have applied the patch to use a later version of Android or a custom ROM.
A huge thanks to @XCnathan32 for the original fix!
The steps below will wipe all data from your device!
For Rooting Information and Google Pay fix, see 2nd post.
Changelog
​02/05/2018 - Updated method and added custom ROM method.
​01/05/2018 - Updated TWRP from version 3.1.1.0 to 3.2.1-0.
What does this do?
There are two versions;
The first process will install the 'newest' stock version of Android onto your device; it will then install a custom recovery, and finally flash the updated boot.img file.
The boot.img has been modified slightly to only use 4 out of the 6 cores on the processor, this fixes the overheating issue with the Nexus 5x devices.
The other version is similar except using a custom version of Lineage OS.
Instructions
For detailed instructions and more info please visit the original thread.
Please make sure to have all of the downloaded file ready.
First Method - Stock Image
1. Boot into fastboot mode.
2. Extract factory image zip file and go into its directory.
3. With the phone in fastboot mode and connected the computer, open 'flash-all.bat'.
​3a. Let the process finish; the device will reboot.
4. Go back into fastboot mode.
​4a. [optional] you may wish to flash a custom recovery. If so move into the directory where you have the custom image downloaded. follow step 6a and type in
Code:
fastboot flash recovery [filename].img
5. Now move into the directory in which you downloaded the boot.img file.
6. Once inside; shift-right-click in the file manager and select 'open in powershell' or 'open in cmd'
7. Once the command window has opened: type in
Code:
fastboot flash boot boot.img
8. Now reboot the device!
Second Method - Custom ROM
1. Boot the device into fastboot mode
2. Download the ROM [linked below].
3. Download the GAPPS package [linked below].
4. Download Magisk [linked below].
5. Download the stock factory image; this is important as it contains the newest version of the bootloader, radio and vendor images, which is needed for Lineage to work [linked below].
6. Extract the stock factory image and go into it’s directory.
​6a. There should be a file called ‘flash-all.bat’ - double-click to run it (Make sure phone is plugged in and in fastboot mode!).
​6b. Let the process finish; the device should reboot.
7. Once the device has rebooted, again make sure it’s in fastboot mode.
8. Now download the custom version of TWRP; go into it’s directory then shift-right-click and select ‘open with cmd’ or ‘open with powershell’.
9. Then type the following:
Code:
fastboot flash recovery [filename].img
10. Once that process has finished (it should only take a sec), boot into recovery mode by selecting it via the volume up & down keys; the using the power button to select.
11. Once in recovery;
​11a. Copy and paste the ROM zip archive, Magisk and the GAPPS package to the phone. You should be able to view your phone in the file explorer. If not please install the adb & fastboot drivers.
​11b. Once done; go to ‘Install’ -> the select the zip file you transfered. It will now ask you to confirm, drag the bar across to accept the flash.
12. The ROM will now be flashing; leave it until it is done!
13. Once that process has finished; go back into the install section.
​13a. Now you need to flash the GAPPS package.
14. Once the GAPPS has finished flashing; you now need to flash Magisk. This allows you to root your device and use services like Google Pay.
15. Now reboot!
If all is good then the device will reboot. You should see a boot animation (This can take up to 30 mins, so please wait!), after you should now see the android setup process.
Downloads
The fixed boot image can be downloaded from here.
The factory image: please make sure the version you are downloading matches the updated boot images'. It can be found here.
Modified Lineage OS ROM (boot image updated to the fix); it can be found here.
Magisk -> here.
GAPPS -> here. (Download for ARM64).
A fixed version of TWRP created by @XCnathan32 and updated by me to work with the 4-core boot image. Download Here.
Disclaimer
I will not be held responsible for anyone that decides to proceed with the steps listed above. If there are any issues please post them below with as much detail as you can. I will try my best to answer them, but I do have real-life stuff to deal with.
The original mod was not created myself! I have simply updated it.
Click to expand...
Click to collapse
With the second method, I flash all the files separately, and when I reboot it, the bootagement of Lineage OS started, but it got stuck, how do I fix it?
Dragon's Fedora said:
Nexus 5x BLOD fix (OPM2.171019.029)​​I recently purchased a Nexus 5x from ebay; it had the BLOD issue and, after many days I managed to fix it.
So I have decided to update the boot image to the 'latest' android factory image; this will allow people who have applied the patch to use a later version of Android or a custom ROM.
Click to expand...
Click to collapse
Good job! Works great for me and my similarly acquired device. Easy to read and follow write up too!
For others who may have done something weird like myself during the flash all process. The only issue I had initially was getting a boot and recovery sig not verified error message (or something like that). Worked around it by extracting the zipped image-bullhead-opm file and copying my fastboot files within the folder then fastboot flashing recovery, system and vendor manually. Then everything per steps explained worked as described. This is probably a common, well known error and fix to the BLOD Nexus 5X owners but I've just had this crazy device 2 days.
Thanks again!
Used 2nd method and worked perfectly.
Phone has been on non-the-less for a solid 3 hours and battery is stable (had really bad battery drain before, and the system was locking up and freezing and unresponsive as well 2-3 weeks before the BLOD.
I had also previously tried to flash a few other newer 8.1 roms after getting this BLOD, however phone crashed several times during installation and returned to BLOD and was unable to return to TWRP/recovery.
Glad the phone is back to life. Thanks a bunch for the modified rom, TWRP link, and guide!
On a side note, do you feel it is safe to try to flash other vendor images + roms + kernels now... or will the device go back to BLOD. From what I understood this is hardware issue, not software? @Dragon's Fedora
only4dank said:
Used 2nd method and worked perfectly.
Phone has been on non-the-less for a solid 3 hours and battery is stable (had really bad battery drain before, and the system was locking up and freezing and unresponsive as well 2-3 weeks before the BLOD.
I had also previously tried to flash a few other newer 8.1 roms after getting this BLOD, however phone crashed several times during installation and returned to BLOD and was unable to return to TWRP/recovery.
Glad the phone is back to life. Thanks a bunch for the modified rom, TWRP link, and guide!
On a side note, do you feel it is safe to try to flash other vendor images + roms + kernels now... or will the device go back to BLOD. From what I understood this is hardware issue, not software? @Dragon's Fedora
Click to expand...
Click to collapse
Whilst the issue is caused by the hardware; it's actually the software that causes the BLOD. The phone tries to use the 6 cores, but when it detects two of them failing it reboots the device. You can try use other; newer vendor images BUT you must make sure to change the boot.img file within the vendor zip folder.
Whilst the issue is caused by the hardware; it's actually the software that causes the BLOD. The phone tries to use the 6 cores, but when it detects two of them failing it reboots the device. You can try use other; newer vendor images BUT you must make sure to change the boot.img file within the vendor zip folder.
Dragon's Fedora said:
Whilst the issue is caused by the hardware; it's actually the software that causes the BLOD. The phone tries to use the 6 cores, but when it detects two of them failing it reboots the device. You can try use other; newer vendor images BUT you must make sure to change the boot.img file within the vendor zip folder.
Click to expand...
Click to collapse
there is a modified rom that is not stock to boot with the 4 cores, and flashed this boot and the recovery fixed and my nexus is restarted every 5 seconds I would appreciate your help and read many post and I think there is no solution
only4dank said:
Used 2nd method and worked perfectly.
Phone has been on non-the-less for a solid 3 hours and battery is stable (had really bad battery drain before, and the system was locking up and freezing and unresponsive as well 2-3 weeks before the BLOD.
I had also previously tried to flash a few other newer 8.1 roms after getting this BLOD, however phone crashed several times during installation and returned to BLOD and was unable to return to TWRP/recovery.
Glad the phone is back to life. Thanks a bunch for the modified rom, TWRP link, and guide!
On a side note, do you feel it is safe to try to flash other vendor images + roms + kernels now... or will the device go back to BLOD. From what I understood this is hardware issue, not software? @Dragon's Fedora
Click to expand...
Click to collapse
Which version of gapps did you use?
I was messing around and deleted google play store, now none of the google apps works. I went a head to download gapps and tried sideloading it. It showed me the error, then i downloaded the pico version and also fix my system partition. It says i have 140mb of free space in that partition. I tried sideloading pico again and still the same error.
Yurodd said:
I was messing around and deleted google play store, now none of the google apps works. I went a head to download gapps and tried sideloading it. It showed me the error, then i downloaded the pico version and also fix my system partition. It says i have 140mb of free space in that partition. I tried sideloading pico again and still the same error.
Click to expand...
Click to collapse
You're probably going to have to flash your phone back to stock to re-gain all of your apps.
Zachisimo said:
You're probably going to have to flash your phone back to stock to re-gain all of your apps.
Click to expand...
Click to collapse
So flash the rom again? is that going to wipe my phone?
Dark Nightmare said:
This is a basic write up to convert your bootloader unlocked T-Moilbe OnePlus 6T to the International Version firmware via fastboot flashable firmware files.
Contents:
-Disclaimer
- Full Device Backup - Precautionary - Optional, but Recommended.
-Firmware Versions and Flashing Instructions
-Rom Sources
-MSMDownloadTool
-FAQ's
-Additional/Optional Tools
-Credits
Disclaimer:
Like any other form of modding, there are risk involved, we have a near flawless option to recovery by use of the MSMDownload linked at the end of this post, but like with any form of modification, you are solely responsible for what is done to your device and you accept all risk involved, should something go wrong, for the most part, recovery is fairly simply, no matter how bad we screw up, thanks to OP.
Instructions to a full device backup:
1. Download the zip below and extract it to it's own folder
2. run cmd.exe while in fastboot mode and run the following commands:
3. Once twrp boots, run the backup.bat script included, it will backup all partitions on your device, including your efs.
4. zip all of the image files and store it somewhere safe.
Backup: https://androidfilehost.com/?fid=11410963190603855581
For Users Looking to Flash to Firmware versions 9.0.4-9.0.5
FLASHING STEPS
Requirements:
1. Bootloader Unlocked T-Mobile OP 6T
Unlock Processs Can Be Found Here: https://support.oneplus.com/app/ans...-bootloader-for-oneplus-6t-(t-mobile-version)
2. OOS Stock ROM of your choice: all necessary zip files are included in the rom file.
3. PC/MAC/LINUX
Flashing Process
1.. Whichever full rom zip you choose, extract its contents. (In my case I used the 9.0.5 full zip)
2. In each zip file you'll find images.zip as well as others_flashall.zip, extract both of them into the same folder/directory as the rest of the original zip file.
(Optional, download the modded flash-all-partitions-fastboot.bat file at the end of the thread, it includes the reboot command to auto reboot when done flashing)
Attached Below is also a flash-all-partitions-fastboot.sh script for Mac OS users (Note this script will not wipe your device, so if you need to wipe, run the ./fastboot -w command in fastboot manually)
All bat files, images and adb files should all be in the exact same folder, no subfolder(s)
3. Now boot into fastboot using either the vol+/vol- and power key combo or via adb using the following adb command .
4. Once in fastboot run the bat file called flash-all-partitions-fastboot.bat
9
5. When asked, I would advise typing 'Y' for yes to format the device. (wipe only if you're converting for the first time)
The sparse header error is completely normal.
6. Upon completion, the script should pause and say press enter to continue, it will not reboot your device...
WAIT UNTIL NOTHING ELSE IS HAPPENING AND ITS NO LONGER FLASHING ANY FILES
At this point, hit power and reboot.
All done!
Firmware Version 9.0.6
Requirements
1. Bootloader Unlocked T-Mobile OP 6T
Unlock Processs Can Be Found Here: https://support.oneplus.com/app/ans...-bootloader-for-oneplus-6t-(t-mobile-version)
2. OOS Stock ROM of your choice: all necessary zip files are included in the rom file.
3. PC/MAC/LINUX
Steps to Flash
Note: Modded fastboot flashing script attached at the end with the reboot command included, also attached is a script for MAC users, mac script will not wipe your device, wipe manually if you need to using
ROM Sources
Mauronofrio's Thread
T-Mobile 9.0 FULL Fastboot ROM
Saythis' International Firmware 9.0.6
Recovery - MSMDownloadTool
If for some WEIRD reason you brick, have a HW mismatch, etc, or you just can't boot go to this thread -> MSMDownloadTool - T-Mobile 9.0
OPTIONAL Steps
Root is available via two Options below:
- OnePlus Rooter
- Manual Root Using a Patched Boot Image
Automated Process
Luckily There are devs looking to make things simpler:
More an automated tool to carry out this process, go to the thread below:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-oxygen-os-9-0-6-fastboot-windows-t3870170
WARNINGS!
-Advisable you disable automatic updates in developer options upon boot if it is enabled.
-Do not attempt to update using the OTA files, so far we've had one softbrick due to it and said user was unable to boot into fastboot to attempt any kind of recovery.
-ALSO DO NOT FLASH WITHOUT THE FILES IN THE FOLDER, IF YOU DO YOU WILL END UP WITH A SOFTBRICK
-If you get either dump mode or fastboot bootloop check your downloaded rom file to make sure its complete, unzip again and flash again
FAQ
Q. Will this enable dual sim functionality?
A. Dual sim functionality works, volte, Wifi calling and vvm.
Q. Can I take OTA's like a regular device?
A. No, sadly.
Q. What about when a new update comes out?
A. Once a fastboot flashable ROM is made, you can update using the steps above, using the new ROM files.
Q. What if I brick or have a HW/SW mismatch?
A. Use the MSMDownloadTool to recover.
Q. Do all the features work?
A. For the most part, there are minor bugs, but they aren't consistent, so can't really say.
Q. Is this a full conversion?
A. Somewhat.
Q. Do I have to wipe everytime I update?
A. No, wiping may only be necessary for conversions, no wipe needed to update.
Q. Do I have to root everytime I update?
A. Yup, sadly.
Q. Do I have to convert to a specific version?
A. Nope, you can convert to any version.
if any edits are suggested, I'll include them.
Credits:
@mackentosh for testing and unfortunately bricking using the OTA File
@Velrix for being the second successful tester, among others.
All the other users who've been testing/contributing to testing
I'll add names when I get to comb through the threads.
@Dameon87 for the correct ROM source link of the unpacked ROM with batch files.
@Krunk_Kracker for the disable auto updates image
Thanks to @Addiso for the Stock T-Mobile Backup images
@mauronofrio for the scripts and for hosting the Rom zip @hartleyshc for testing and confirming full dual sim functionality.
@Saythis - for the 9.0.6 FULL ROM Zip
Click to expand...
Click to collapse
I would follow this guide. Than choose Y when asked to wipe data. If you want to choose N let me know how it goes. But the easiest way is going to be to start from fresh using this guide by @Darknightmare.