Looking for SM-J327P ENG Bootloader - Samsung Galaxy J3 (2016) Questions & Answers

Hello,
Does anyone have or know where I can find the engineering bootloader for the SM-J327P?
I need to set selinux to permissive and the default bootloader isn't allowing it.
Specifically for:
Software/Baseband: J327PVPU1AQB6
Hardware: J327P.03
Carrier: Sprint
Thanks!
-N2

Nemesis said:
[;73411691]Hello,
Does anyone have or know where I can find the engineering bootloader for the SM-J327P?
I need to set selinux to permissive and the default bootloader isn't allowing it.
Specifically for:
Software/Baseband: J327PVPU1AQB6
Hardware: J327P.03
Carrier: Sprint
Thanks!
-N2
Click to expand...
Click to collapse
Us J320A owners (ATT) need an eng boot for Nougat too... After the N update the eng boot didn't work. It would awesome if someone could help us get an eng boot for J320A also!

DJJosephJumper said:
Us J320A owners (ATT) need an eng boot for Nougat too... After the N update the eng boot didn't work. It would awesome if someone could help us get an eng boot for J320A also!
Click to expand...
Click to collapse
It's unlikely an eng boot for Nougat will be released. Samsung only release eng boots for the android version the device was released with.

There is an eng boot for the j327p. I have it. But it is AQF1. It works fine. Although it books your WiFi. Although my data works fine. The eng boot is great for full permissive on the system. Not sure what needs to be done to fix the WiFi though. Going to compare my stock boot to the eng boot and try swapping in a few things to the eng boot to see if I can restore wifi

Which version is your boot loader..... fifth number from the end going backwards , I have both v2 and v3 , got 2AQI2 and 3AQL3 which both have separate single modem, boot, aboot, and a single firmware file with all 3 of them with everything else, its a eng combo/complete file... ??

Related

[bootLoader] how to upgrade the bootloader ?

Hello,
I own a galaxy s4 i 9505 (internationnal version)
I bought it with Samsung rom, modem version XXUBMGA.
now, I recently upgraded my modem, because I try some ROM like GE roms.
this is working fine.
I noticed, today, using a software to have infos about my device, and 3G signal (Signal network info) that my device has this bootloader :
I9505XXUBMGA.
it is too old (I bought it in May 2013, so the modem, boot loader etc... have more than 6 month now...
how can I update it ? where to find boot loader ? I find easily modem, but no boot loader.
thanks for any info
Olivier
re: bootloader
orobin said:
Hello,
I own a galaxy s4 i 9505 (internationnal version)
I bought it with Samsung rom, modem version XXUBMGA.
now, I recently upgraded my modem, because I try some ROM like GE roms.
this is working fine.
I noticed, today, using a software to have infos about my device, and 3G signal (Signal network info) that my device has this bootloader :
I9505XXUBMGA.
it is too old (I bought it in May 2013, so the modem, boot loader etc... have more than 6 month now...
how can I update it ? where to find boot loader ? I find easily modem, but no boot loader.
thanks for any info
Olivier
Click to expand...
Click to collapse
Why in the world would you want to "update" your bootloader?
I think it would be worth your while to read up on bootloaders
before you end up with a shiny brick with a 5 inch black screen.
Here is a good link to find out what a bootloader is and does:
http://forum.xda-developers.com/wiki/Bootloader
Bootloaders have nothing to do with the speed or the stability of the phone.
Good luck!
orobin said:
Hello,
I own a galaxy s4 i 9505 (internationnal version)
I bought it with Samsung rom, modem version XXUBMGA.
now, I recently upgraded my modem, because I try some ROM like GE roms.
this is working fine.
I noticed, today, using a software to have infos about my device, and 3G signal (Signal network info) that my device has this bootloader :
I9505XXUBMGA.
it is too old (I bought it in May 2013, so the modem, boot loader etc... have more than 6 month now...
how can I update it ? where to find boot loader ? I find easily modem, but no boot loader.
thanks for any info
Olivier
Click to expand...
Click to collapse
lol this is the first time I see someone wants a newer bootloader.. As the post above me, a newer bootloader won't make your phone faster ..Anyway you already have the latest knox one
AnaMajhol said:
lol this is the first time I see someone wants a newer bootloader.. As the post above me, a newer bootloader won't make your phone faster ..Anyway you already have the latest knox one
Click to expand...
Click to collapse
hi,
no I don't look for speed.
I was thinking that it could have some impact when trying some ROM, like :
kitkat GE Rom which are not stable, even if the rom comes i9505GE official Google edition rom which should be stable...
I was thinking that the difference between a i9505 and a i9505GE could be the bootloader, as the hardware is exactly the same...
thanks
Olivier
You are on a pre KNOX boot loader so stick with it. No need to update. Updating to a KNOX boot loader will give you a knox flag once it a tripped there's no going back. With a KNOX boot loader you can not downgrade as well. I'm on the old boot loader and custom 4.3 roms work well.
Sent from my GT-I9505 using Tapatalk
Mobile ODIN is the reason
Hello,
I have a MJ5 bootloader and to use the app Mobile ODIN I am advised to use the MJ7 version or I might soft-brick my phone...
I already have the KNOX flag at 1, so I suppose I should not worry about that... And I can't find anywhere (I did search the forum and google) how to do this.
Before anyone asks.. I have and work with OS X and I am aware of Heimdall (ODIN replacement for macs). But I tried using it and it did not recognize my phone to download my .PIT file. Also, its quite confusing about heimdall packages instead of normal files..
So, Im going for Mobile ODIN which seems to be the easiest way to ODIN.
Can anyone help? Should I worry about anything else than KNOX flag that I am not aware of when changing the bootloader?
Thanks in advance.

[HELP]SAMSUNG N900L Galaxy Note 3 FLASHING FOR NEWBS LIKE ME

Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
1. You can download the latest firmware for your device: HERE. Follow the pics attached (The download is slow like a turtle but be patient).
2. These firmware package is one package. Download, unzip it and flash it then using odin tool to brush into the radio PDA. Lil GUIDE: HERE.
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
Seems all ok. Why you don't update your phone via OTA?
I'm going to try flashing it using Arya Mod v1.7 what kernel should I use ?
n900p
I have the same basebank k1..... did this stock work perfect...
Un-bricked Galaxy Note 3 (SM-N900L) on KitKat 4.4.2 - N900LKLUFNK1:
* Download link: http://youtu.be/FGoqxX3BwA0
* Flash by ODIN 3.07 or up
* Based on Official Firmware N900LKLUFNK1
* Android version KitKat 4.4.2
* Rooted by SuperSU 2.45
* KNOX Removed
* Fixed all Korean:
- Removed Korean characters on Dial Pad
- Add (+) sign for International call on (0) Dial Pad
- Removed all Korean apps
- Fixed Network Mode (2G/3G/LTE/Auto)
- 90 languages + ASOP for EUROPE
* Facebook::https://www.facebook.com/pages/Galaxy-Note-3-LTE/749184655174799
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
User wants $ 25 for the password to the archive...
Don't join XDA if you wanted to get Paid... Trust me.. you will get nothing
Regards
macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Hokage-Sama said:
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
Click to expand...
Click to collapse
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
cmro said:
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Click to expand...
Click to collapse
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
ab.normal said:
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
Click to expand...
Click to collapse
Do you have a custom recovery and is your mobile rooted?
Hokage-Sama said:
Do you have a custom recovery and is your mobile rooted?
Click to expand...
Click to collapse
Hello Hokage-Sama,
i think the custom recovery installed is TWRP
did some further searching online and i was able to restore the firmware from lollipop down to kitkat, from there i was able to download a md5 file which i ran from Odin and i was able to root the phone however, its based on kitkat and im still searching if there are any for lollipop and the only one i see if the 1 poser who asks for a $25 payment to update a N900L to N9005.
... was hoping if i can use Aryamod custom rom but i think my phone should be on a rooted lollipop under N9005 model only.
hope this made sense
thank you
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
audit13 said:
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
Click to expand...
Click to collapse
hi, thanks for the reply
apologies i dont know what you meant to edit hte updater script.
Sorry i have a N900L and based on reading some other threads only
DarkLord Note 5 RC2.1 or Phronesis v5.1 will work on my unit.
before installing the rom i should have a custom recovery right? but to get a custom recovery my bootloader needs to be unlocked first.
i am currently stuck on unlocking my bootloader, i downloaded samsung usb drivers, go to recovery mode, then insert the usb on the phone, i hear a sound when you connect a device on the pc and saying that the device is ready to use but i am unable to see the contents of my phone.
am i doing it correctly?
thank you once again
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
audit13 said:
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
Click to expand...
Click to collapse
i tried the twrp custom recovery based on the link you sent above thru Odin, it messed up my custom recovery, when i tried to go there it said something like unable to load recovery and goes to download mode and the phone wont startup normally.
is that a sign that my bootloader is locked since i cant install the custom recovery?
used my standard backup recovery to bring back the phone.
i wonder how other SM-N900L users installed their roms.
any other help would be greatly appreciated
thanks a lot
When you flashed twrp, did Odin say the installation was successful?
Download the tar version of twrp for your device from here: twrp.me .
In Odin, do not check anything except f.reset time. Flash twrp and, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait 5 seconds, replace battery, now use button combination to boot into recovery.
thanks for the help, was finally able to install twrp custom recovery. the latest version wont work on SM-N900L, i used TWRP-2.8.6.0-N900S version and it worked! im now running on Darklord N5 custom rom for Note3 and loving it!!!

[Q] AT&T S5 (SM-G900A) Custom Recovery/ROM?

I've been doing a lot of research on installing a custom recovery on my S5 and then a custom ROM. So far every guide I've read said that since AT&T has a locked/encrypted boot loader and that installing a custom recovery should be impossible; however, I seem to have an unlocked phone (unlocked padlock on boot screen). I'm guessing this phones a unicorn, but don't want to brick it by accident either. Is there a way I could check if this is possible without risking bricking the device? I'm sorry if this question is dumb. I've owned 4 HTC phones in the past and as you all know HTC makes installing custom software incredibly easy. Thanks in advance for any advice you can give!
Also I'm a new user so I can't attach images. Here are the URLs though. Sorry for breaking the rules, but it's not spam. I just need some advice
Boot screen:
http 54.243.206.101 IMG_0261.JPG
Model:
http 54.243.206.101 IMG_0262.JPG
tiernanx said:
I've been doing a lot of research on installing a custom recovery on my S5 and then a custom ROM. So far every guide I've read said that since AT&T has a locked/encrypted boot loader and that installing a custom recovery should be impossible; however, I seem to have an unlocked phone (unlocked padlock on boot screen). I'm guessing this phones a unicorn, but don't want to brick it by accident either. Is there a way I could check if this is possible without risking bricking the device? I'm sorry if this question is dumb. I've owned 4 HTC phones in the past and as you all know HTC makes installing custom software incredibly easy. Thanks in advance for any advice you can give!
Also I'm a new user so I can't attach images. Here are the URLs though. Sorry for breaking the rules, but it's not spam. I just need some advice
Boot screen:
http 54.243.206.101 IMG_0261.JPG
Model:
http 54.243.206.101 IMG_0262.JPG
Click to expand...
Click to collapse
Nope, unlocked pad means mostly nothing, unless the phone is on KK right now your outta luck
Sent from my Galaxy S5 using XDA Labs
Rakuu said:
Nope, unlocked pad means mostly nothing, unless the phone is on KK right now your outta luck
Sent from my Galaxy S5 using XDA Labs
Click to expand...
Click to collapse
Thanks Rakuu. So what exactly does the padlock mean? I have Lollipop and it's rooted. Coming from HTC phones, I thought it meant I could go ahead and flash something custom.
If you're using your phone as it came to you out of the box, it's not rooted and if it's running 5.0/5.1 lollipop, then, thanks to AT&T's encryption methods, rooting will be near on impossible.....
keithross39 said:
If you're using your phone as it came to you out of the box, it's not rooted and if it's running 5.0/5.1 lollipop, then, thanks to AT&T's encryption methods, rooting will be near on impossible.....
Click to expand...
Click to collapse
I'm running 5.0 and have root. I'm just trying to figure out if I can install a custom ROM, lets say Cyanogenmod. Everything I read says I can't, but apparently that's due to AT&T's locked boot loader and it appears mine is unlocked. I guess, I'm just trying to figure out what the hurdle is.
tiernanx said:
I'm running 5.0 and have root. I'm just trying to figure out if I can install a custom ROM, lets say Cyanogenmod. Everything I read says I can't, but apparently that's due to AT&T's locked boot loader and it appears mine is unlocked. I guess, I'm just trying to figure out what the hurdle is.
Click to expand...
Click to collapse
Its not unlocked, ignore the padlock its just cause you're rooted. You can only install touchwiz based roms, check the att s5 section, there's 3 or 4 different ones you can try.
Sent from my Galaxy S5 using XDA Labs
Rakuu said:
Its not unlocked, ignore the padlock its just cause you're rooted. You can only install touchwiz based roms, check the att s5 section, there's 3 or 4 different ones you can try.
Sent from my Galaxy S5 using XDA Labs
Click to expand...
Click to collapse
Hi, let's see if you can respond from here, I could Flash an equal phone by following your guide here: https://forum.xda-developers.com/att-galaxy-s5/general/guide-merry-christmas-heres- t3516196
I already managed to be ROOT with SuperUser, the problem is that I now need Custom Recovery for this terminal, I do not know if the TWRP For S5 klte (Flash to Odin) or the Philz Touch 6.26.6 Klte fgor S5 SM-G900A. The issue is that your guide (in that thread) installs everything by FlashFire, as I do now to install in this new ROM (ROM Firmware SM-G900A_OF3_Stock_Rooted_By noship) the Custom Recovery? I think I need it to install the Patch to enable Tethering native WiFi on AT & T on Samsung Galaxy S5 T-Mobile.
This phone does not have WiFi enabled.
Old data (principle) of this phone:
Model: Samsung SM-G900A
Baseband Version: G900AUCU4C015
Android version: 5.1.1
Compilation Number: LMY47X.G900AUCU4C015
Kernel Version: 3.0.4-58693B4 / dpi @ SWHD4323 # 1 / Tue Sep 22 21:22:27 KST 2015
KNOX Version: KNOX 2.4
New data now:
Model: Samsung SM-G900A
Baseband Version: G900AUCU4BOF3
Android version: 5.0
Compilation Number: LMY47X.G900AUCU4C015
Kernel version: 3.4.0-4432708 / dpi @ SWHD7515 # 1 / Tue Jul 30 14:46:57 KST 2015
KNOX Version: KNOX 2.3
(NOTES: I THINK THAT THE BOOTLOADER IS STILL CLOSED BY AT & T)
Thanks..

V570KL Verizon .. and ENG Firmware + Bootloader UNLOCK + TWRP ? Discussion

there is serious issue on this model regarding wifi .. it only work in US ..
recently i was playing with firmware and found out that if we flash ENG firmware on this ASUS verizon model .. Wifi will start working but there is no Playstore and many applications are missing .. but BOOTLOADER can be UNLOCKED by fastboot oem UNLOCK ..
this ENG firmware also has root permissions ...
Sim network also working on this ENG Firmware ..
so who can be make its TWRP ...
I have arranged the ENG Firmware & Stock firmware of V520KL and i will also get it for V570KL till tomorrow ..
VK520KL
ENG FIRMWARE
https://mega.nz/#!v9gmHQIK!ze6HwCLMseQo_ICVvXFEyJygupIRXH-OggGg8LCSSIs
STOCK VERIZON FIRMWARE
https://mega.nz/#!3thwWQ7I!9fY2UdwxQKISWZqxpZPUmcrct03wEeqQNWD5qQLufDY
VK570KL
ENG FIRMWARE
https://mega.nz/#!jl42mAQT!lNwdcveO0QHnB9pFAtf3ydz5bYeq2vRIWCB1y8INXcA
STOCK VERIZON FIRMWARE
https://drive.google.com/open?id=1jizFR0TJ5TzocGe0l42kB6_CDTDkSc9A
aamszia said:
VK570KL
ENG FIRMWARE
STOCK VERIZON FIRMWARE
Click to expand...
Click to collapse
Hi. After flash with 3.7 phone not powering on, stuck on startup filed.
Can you upload VZW_V570KL_V3.7.8_all_user? If you have this version.
Flash ENG Firmware , than RELOCK Bootloader by fastboot oem lock and reflash stock verizon firmware
aamszia said:
Flash ENG Firmware , than RELOCK Bootloader by fastboot oem lock and reflash stock verizon firmware
Click to expand...
Click to collapse
I will try... But one problem, I do not have unlock code for bootloader if it is still needed
Okay. I try now...
Thank you for reply.
....
Oops, can`t relock without code
---------- Post added at 10:16 AM ---------- Previous post was at 09:48 AM ----------
aamszia said:
Flash ENG Firmware , than RELOCK Bootloader by fastboot oem lock and reflash stock verizon firmware
Click to expand...
Click to collapse
Turned with your instruction, but now wifi not working
aamszia said:
there is serious issue on this model regarding wifi .. it only work in US ..
recently i was playing with firmware and found out that if we flash ENG firmware on this ASUS verizon model .. Wifi will start working but there is no Playstore and many applications are missing .. but BOOTLOADER can be UNLOCKED by fastboot oem UNLOCK ..
this ENG firmware also has root permissions ...
Sim network also working on this ENG Firmware ..
so who can be make its TWRP ...
Click to expand...
Click to collapse
Awesome, thanks for sharing this. After unlocking the bootloader, can you then flash the Verizon software and have an unlocked bootloader?
jal3223 said:
Awesome, thanks for sharing this. After unlocking the bootloader, can you then flash the Verizon software and have an unlocked bootloader?
Click to expand...
Click to collapse
After bootloader UNLOCK , when i flash it to Verizon firmware , phone says error in the staryup ( Software is corrupt , reflash it by Software Assistant ) .
if i RELOCK the bootloader , then the verizon firmware boots just fine
aamszia said:
After bootloader UNLOCK , when i flash it to Verizon firmware , phone says error in the staryup ( Software is corrupt , reflash it by Software Assistant ) .
if i RELOCK the bootloader , then the verizon firmware boots just fine
Click to expand...
Click to collapse
What's all missing on the Eng firmware as far as keeping it from being a daily driver? Does data and wifi work on Verizon?
jal3223 said:
What's all missing on the Eng firmware as far as keeping it from being a daily driver? Does data and wifi work on Verizon?
Click to expand...
Click to collapse
WIFI WORKS
NETWORK WORKS
no Playstore .
No NOTIFICATION BAR
aamszia said:
WIFI WORKS
NETWORK WORKS
no Playstore .
No NOTIFICATION BAR
Click to expand...
Click to collapse
You can side load the playstore. Try Here
What do you mean no notification bar? Is it just in expanded desktop or something?
aamszia said:
WIFI WORKS
NETWORK WORKS
no Playstore .
No NOTIFICATION BAR
Click to expand...
Click to collapse
Bump on the notification bar. What does it mean that there is no notification bar? Is it just blank at the top of the screen? Also, did you get the playstore working from the link I provided?
@aamszia Also, I'm curious if you can flash the unlocked firmware on the device after the bootloader is unlocked? I'm thinking it would allow the software modifications because ethe latest firmware was designed to work with the unlock app Asus provided.
Hello
How you flashed this firmwares? Which program you used?
aamszia said:
there is serious issue on this model regarding wifi .. it only work in US ..
recently i was playing with firmware and found out that if we flash ENG firmware on this ASUS verizon model .. Wifi will start working but there is no Playstore and many applications are missing .. but BOOTLOADER can be UNLOCKED by fastboot oem UNLOCK ..
this ENG firmware also has root permissions ...
Sim network also working on this ENG Firmware ..
so who can be make its TWRP ...
Click to expand...
Click to collapse
I just received my phone today. How did you flash this ENG Firmware so that I can see what I can get working? I have tried the Asus Flashtool, and also trying to flash it through adb. Do you have any directions that you would mind providing?
use ASUS Flash tool , select model , Put phone in FASTBOOT and than START
aamszia said:
use ASUS Flash tool , select model , Put phone in FASTBOOT and than START
Click to expand...
Click to collapse
Thanks man! I have the ENG firmware installed now. It is very barebones.
Have you tried flashing the TWRP through fastboot that is in the developers section? I think maybe the WW firmware could then be flashed if TWRP is able to be loaded because the WW firmware seems to be in zip/flash format from asus's site.
Also, I'm getting: FAILED (remote: oem unlock is not allowed) even after enabling OEM unlock in developer's settings when trying to unlock the bootloader.
Fastboot oem unlock works when you are ENG Firmware .. but we have no TWRP ...
jal3223 said:
Thanks man! I have the ENG firmware installed now. It is very barebones.
Have you tried flashing the TWRP through fastboot that is in the developers section? I think maybe the WW firmware could then be flashed if TWRP is able to be loaded because the WW firmware seems to be in zip/flash format from asus's site.
Click to expand...
Click to collapse
Can you share your version of Asus Flash Tool?
Thanks

S7 G930P -> G930T flash, trying to use this unlocked sprint on Tmobile

Software Version
G930PVPU6CRE7
Rev0.6
Which 930T rom do I need, I had gotten one and it "Auth Failed!" during the flash, now I'm left with "! Use emergency recovery software" brick. Can get back into Odin Download mode, just don't know which rom I need.
Sim is unlocked.
Non-root.
Laokin said:
Software Version
G930PVPU6CRE7
Rev0.6
Which 930T rom do I need, I had gotten one and it "Auth Failed!" during the flash, now I'm left with "! Use emergency recovery software" brick. Can get back into Odin Download mode, just don't know which rom I need.
Sim is unlocked.
Non-root.
Click to expand...
Click to collapse
Evidently you did not read basics about bootloader prior to starting flash.
Now you can flash back to your original bootloader 6 sprint rom to revive the phone.
You cannot flash your phone to Tmobile rom due to bootloader issues, but you may be able to use sprint phone on Tmobile. network.
His listed version would make it seem like he is on BL V6 - which should be able to be flashed. Or am I wrong?
yves31 said:
Evidently you did not read basics about bootloader prior to starting flash.
Now you can flash back to your original bootloader 6 sprint rom to revive the phone.
You cannot flash your phone to Tmobile rom due to bootloader issues, but you may be able to use sprint phone on Tmobile. network.
Click to expand...
Click to collapse
Well there chief, would you be so kind to point me to the "Basics" about the bootloader, because this site is ****ing terrible for finding stuff. Sorry I'm not going to spend 14 hours combing XDA to find something that's "Basic." No matter what bootloader it is; there should be a way to roll it back, after all it's just a rom chip, even if I need to flash a custom first, there should be a way to do it.
trevor2k said:
His listed version would make it seem like he is on BL V6 - which should be able to be flashed. Or am I wrong?
Click to expand...
Click to collapse
It is BLV6, which apparently doesn't accept any T or U roms, the only rom that works is the stock;
Software Version
G930PVPU6CRE7
Rev0.6
G930PVPU6CRE7_G930PSPT6CRE7_SPR
There has to be a way to load a custom bootloader. The answer "It's impossible" is wrong plainly. The solution is to load a custom bootloader that is compatible with the T and U roms, I know this can be done as I've seen it done. I just need a little help finding compatible bootloaders.
Laokin said:
Well there chief, would you be so kind to point me to the "Basics" about the bootloader, because this site is ****ing terrible for finding stuff. Sorry I'm not going to spend 14 hours combing XDA to find something that's "Basic." No matter what bootloader it is; there should be a way to roll it back, after all it's just a rom chip, even if I need to flash a custom first, there should be a way to do it.
It is BLV6, which apparently doesn't accept any T or U roms, the only rom that works is the stock;
Software Version
G930PVPU6CRE7
Rev0.6
G930PVPU6CRE7_G930PSPT6CRE7_SPR
There has to be a way to load a custom bootloader. The answer "It's impossible" is wrong plainly. The solution is to load a custom bootloader that is compatible with the T and U roms, I know this can be done as I've seen it done. I just need a little help finding compatible bootloaders.
Click to expand...
Click to collapse
Since it's impossible is plainly wrong, please provide us with instructions on how you loaded a custom bootloader.
Laokin said:
Software Version
G930PVPU6CRE7
Rev0.6
Which 930T rom do I need, I had gotten one and it "Auth Failed!" during the flash, now I'm left with "! Use emergency recovery software" brick. Can get back into Odin Download mode, just don't know which rom I need.
Sim is unlocked.
Non-root.
Click to expand...
Click to collapse
You can't flash T-mobile rom on Sprint phone because of bootloader updated by sprint if you bricked your phone with bootloader 6 on it you should flash this to recover your phone.
https://updato.com/firmware-archive-select-model?record=76FB5390801511E89F15FA163EE8F90B

Categories

Resources