Related
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
FredyOliva said:
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
Click to expand...
Click to collapse
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
My friend, you are simple the best. You are my hero. I lost one USB cable, but my phone come back. Your "Jump Start" trick worked perfecty. Really thanks about your tip. I don´t have words to glad you.
zabardast_1 said:
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
Click to expand...
Click to collapse
Thanks !
really glade you have it up and running
Have a nice day !
zabardast_1 said:
Thanks !
really glade you have it up and running
Have a nice day !
Click to expand...
Click to collapse
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
FredyOliva said:
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
Click to expand...
Click to collapse
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
zabardast_1 said:
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
Click to expand...
Click to collapse
Thanks one more time and sorry to annoying you...
I LOVE YOU !!!
Thanks more than a lot
Jump start trick worked fine for me too !! I cut the wire off from old usb mouse and use it as informed.
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
But my battery is alive again and I m happy, thank you !
jagr55 said:
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
Click to expand...
Click to collapse
It's just a design flaw. Sometimes things get by engineers. They're too busy trying to create an interesting user experience, and they forget to cross t's and dot i's.
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
iceblade911 said:
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
Click to expand...
Click to collapse
Thanks you all,it was grrrrr8 to hear you all got your phones working again.
Have a nice day !
my qtek 9100 freezes at startup after jump starting.
I jump started my Qtek 9100 and it started up as normal but it freezes at the windows mobile loading screen and doesnt go any further. Does this mean its charging or is the battery completely dead or something?
Wow, it like totally worked but Then I let it charge but battery stays at 0%
Thanks for this thread.
My word am I happy ...
Worked like a charm...
You are my hero! mi Qtek is alive again, i bought a cheap wall charger for a V3 Motorola and it can charge my Qtek after a battery drain off, i tray a lot of things but the usb wire cut off solve my problem and im happy again, thanks a lot and greetings from mexico! Saludos!!
Thanks man it was worked for me,
I was trying to put windows mobile 6 but after that mu camera and voice call buttons doesn't work
If you know more about win mobile 6 on wizard pls help me
Thanks
please do not use stripped USB cable or 9V battery to resurrect wizard. the battery is rated 3.6-3.7V (?? cant remember)... use 3x AA(A) batteries or other 3-4V power supply. I've done this with old pc PSU which has 3.3V output.
Just put battery in, connect charger, connect + - cables while inside wizard - bootup - when windows is loaded device can charge itself - disconnect resurrection power supply.
do not try to charge li-ion battery with whatever currents/voltages... or at least wear some kind of fire protection
Today I had pluged my usb cable in my cell and when I unplug the cable my battery was 30% charged but as soon I unplug the usb cable i got battery low warning and suddenly my cell shutdown. When I start the cell it shows -1% battery and now if I chrage the battery from charger it wont showing charging (animated charging bar) but its actualy charging it very slowly but now if I again plug usb cable and unplug it the cell again shutdown instantly.
I have tried different pcs and cable but the problem still there. Should I hard reset it? I dont install new software or change any settings durring the day.
If there isn't any important data on the phone,yes , you can try the Hard reset,but most probably the cause for not charging, is something else and not the rom (OS),so Hard reseting will not boost up the charging.If the device is not charging ,its rather more of a Hardware issue than a Software. Try to charge with a Wall charger (Mains),if it charges normally,then the fault lies in the usb cable,it might be faulty or try with other usb input port on the pc,but if it still doesn't charge with the Wall charger,than most probably the mini usb port of the phone is faulty or damaged or it might be that the battery is giving upon you.Confirm and check all these options.
I have already tried the external (home) charger and different usb cable and pc.
I cant hardreset as the battery is lower then 50% charged.
Just for your knowledge that the active sync is working fine and ithink mini usb port is not totaly dead,
And the orange light on top is keep blinking when I have plugeed usb cable.
And battery status show +21mA and +68mW only. What it should be?
BTW battery status icon bar keep animating while I have pluged usb cable. does it mean its charging.
Also let you know that this morning my battery last to below 10% charged and after that the problem starts.
And after pluging usb cable for few minutes if i do softreset then after reboot the system shows few % battery charged ( around 10%) but its drains very fast (in 2-5 minutes).
azfar said:
BTW battery status icon bar keep animating while I have pluged usb cable. does it mean its charging.
Also let you know that this morning my battery last to below 10% charged and after that the problem starts.
And after pluging usb cable for few minutes if i do softreset then after reboot the system shows few % battery charged ( around 10%) but its drains very fast (in 2-5 minutes).
Click to expand...
Click to collapse
Ah !
So it has gone below the retention charge, required to start the charging circuit ,thats why its not charging.
Now either try to charge with a wall charger capable of out put of 1.0 amp or you need to 'Jump' start the battery.
i dont understand can you explain it a bit more.
This it what he's trying to say:
The battery has a well-documented bug. If you drain it below a certain amount (around 5% IIRC) then it can ONLY be charged from a wall charger, regardless what else the phone says or does. Your symptoms are weirder than usual, but not too surprising.
Replacement batteries are cheap and readily available. Start shopping for a new one while you leave the phone on the wall charger for at least 6 hours, with the phone OFF. This is a last-ditch attempt to recover your battery. If it still misbehaves after that, it's probably toast.
Thanks for explanation.
does the usb cable hack work (connect the red and black cables to battery + and -)?
azfar said:
Thanks for explanation.
does the usb cable hack work (connect the red and black cables to battery + and -)?
Click to expand...
Click to collapse
YUP !
Thats what is 'Jump' start.If the battery is only below the retention charge,it can be very easily recouped by this trick.If it works fine,otherwise get a new battery,many have recovered their batteries by Jump start.
Check out this link :-
http://forum.xda-developers.com/showthread.php?t=374108
thanks for the link.
OK jump start do the trick (charged the battery) but my phone is still draining the battery very quickly (around 1% a minute) and I havent check the home charger or usb cable charging.
azfar said:
OK jump start do the trick (charged the battery) but my phone is still draining the battery very quickly (around 1% a minute) and I havent check the home charger or usb cable charging.
Click to expand...
Click to collapse
ok,good if it has started to charge,now don't ever let it fall below atleast 30%,how did you charged it if not through home charger or usb cable,get the battery fully cgarged with home mains charger and then check the drainage of the battery.
Secondly,either the battery cells have gone weak and not retaining the charge for long or you are using GPRS more often,coz it drains the battery quite rapidly.it all depends on your usage.
I just charged the battery from naked usb cable and it charged it but the battery drainage problem still presist and if I charge the battery from usb or charger the os dosent shows it charging. I think i should look for new battery.
Can you explain me what kind of battery should i choose for wizard as here too many local batteries are available and I dont know about correct specs for battery like mah, mwh, volt, etc and kindly also let me know I also doubt on my home charger what kind of charger should I get (mah, mwh, volt, amp)?
BTW I dont fully charge (100%) the battery yet, do i still need a one full charge and I also dont shock the battery by 1amp charger aswell.
azfar said:
I just charged the battery from naked usb cable and it charged it but the battery drainage problem still presist and if I charge the battery from usb or charger the os dosent shows it charging. I think i should look for new battery.
Can you explain me what kind of battery should i choose for wizard as here too many local batteries are available and I dont know about correct specs for battery like mah, mwh, volt, etc and kindly also let me know I also doubt on my home charger what kind of charger should I get (mah, mwh, volt, amp)?
BTW I dont fully charge (100%) the battery yet, do i still need a one full charge and I also dont shock the battery by 1amp charger aswell.
Click to expand...
Click to collapse
Yes ! you must first fully charge the battery and than check the drainage.
Secondly I can't recommend any specific battery,check the specifications on the battery and verify it.
If the home charger is doubtful,you shud get an original PDA phone charger capable of 1.00 amp out put.
ok I also don't able to installnew rom on it, its giving me erorr that phone is not connected to usb cable etc.
Now the active sync is not bieng connecting too and I think now my mini usb port is faulty is it repairable?
azfar said:
Now the active sync is not bieng connecting too and I think now my mini usb port is faulty is it repairable?
Click to expand...
Click to collapse
Yes it is repairable or replaceable for that you'll have to contact the cellular company from whom you bought the phone,if its still under warranty. Otherwise get it repaired from any mobile repair shop.
ok may I know from where you belong?
azfar said:
ok may I know from where you belong?
Click to expand...
Click to collapse
Don't you see my country flag on my posts and my city of residence is also mentioned there
hmm I see.
Hi Folks,
My HTC HD2 Android not getting charged either by a wall charger or usb via my pc... i dont what happened suddenly it got turned off due to low battery and when i pluged it for chrging its not showing orange LED notification of charging. when its off and plugged in Orange LED blinked once and Phone got switched on. And when its connected to PC for abt 3 mins it will show charging and after that it shows discharging and battery drains when it shows it discharging . pls help me out coz i dont want to loose my Leo .
Thanx in advance,,,,
Check the pins at the phone which connects to the battery. Sometimes they are deformed and this cause the charging/not charging problem.
But... in this case I don't think this is the problem, because this problem should not affect direct charging from usb cable.
Anyway check them just for sure!
Thanks VDodi
VDodi said:
Check the pins at the phone which connects to the battery. Sometimes they are deformed and this cause the charging/not charging problem.
But... in this case I don't think this is the problem, because this problem should not affect direct charging from usb cable.
Anyway check them just for sure!
Click to expand...
Click to collapse
I tried diff cables but its the same...
Magldr doesn't support charging when phone is off.
Nigeldg said:
Magldr doesn't support charging when phone is off.
Click to expand...
Click to collapse
so if your phone dies how do you get it to charge?
Wdustin1 said:
so if your phone dies how do you get it to charge?
Click to expand...
Click to collapse
Best way is not to let it run out
However, normally it will have enough charge left once it dies to boot up far enough to start charging. If this is not the case, then you have to cut open a USB cable and use the red and black wires to charge the battery. I have not had to do this and am unsure as to how to do it but there are tutorials. It seems simple enough.
Sarathdna said:
Hi My HTC HD2 Android not getting charged either by a wall charger or usb via my pc... i dont what happened suddenly it got turned off due to low battery and when i pluged it for chrging its not showing orange LED notification of charging.
Click to expand...
Click to collapse
Consider, as was previously suggested, a cable connection issue.
While you do not currently have the luxury of looking at your status icons, I have found that, on occasion, when I plugged in the phone to charge, the status icon indicated a USB connection, rather than a charging icon. Unplugging the cable and re-inserting the cable fixed it.
Note that new high quality cables can exhibit the same issue.
You have nothing to lose... Give it a shot.
Good luck.
----
Sent from my ICS HD2 with XDA Premium
Nigeldg said:
I have not had to do this and am unsure as to how to do it but there are tutorials. It seems simple enough.
Click to expand...
Click to collapse
Take out battery, plug chopped up USB cable into wall charger, use fingers to hold red to + black to -, count to twenty, battery in phone, phone into bootloader, real charger cable into phone and wall charger, leave 10 mins, reboot into android. (Can charge all the way in bootloader, but it seems slower than when android is running.)
samsamuel said:
Take out battery, plug chopped up USB cable into wall charger, use fingers to hold red to + black to -, count to twenty, battery in phone, phone into bootloader, real charger cable into phone and wall charger, leave 10 mins, reboot into android. (Can charge all the way in bootloader, but it seems slower than when android is running.)
Click to expand...
Click to collapse
By 'tutorials on how to do this' I basically meant your posts
As previously said if you're using magldr you need to be booted into Android before the phone will charge. You can try to warm the battery up in your hands to squeeze the last bit of power out of it to boot up. Or there are standalone hd2 battery charges you can buy from eBay that charge your battery outside of the phone, they're pretty cheap.
Sent from my HTC HD2 using XDA App
As Samuel said you can charge phone in bootloader. Just try!
Had to buy external charger
item # M00366 this charger was cheap has led's that change from red to blue as the battery charges and has a usb port so you can charge a battery in phone at the same time.
I'd been alternating tween an extended battery and the original when my HD2 started discharging while plugged in. same batteries and nearly a year of typhoon's excellent ROM progression then wham dead batteries....
Hello, i hope the thread is right , someone can help me for a problem of battery? The phone not start. I remove battery and i saw with multimeter is 2,5 volts (so is very down). Now i try to charge with a external charger (very slow for now), however on the nexus there 4 pin. Someone can tell me the right voltage when plug the usb?? Because i dont understand if the phone charge fine or not
Benz83 said:
Hello, i hope the thread is right , someone can help me for a problem of battery? The phone not start. I remove battery and i saw with multimeter is 2,5 volts (so is very down). Now i try to charge with a external charger (very slow for now), however on the nexus there 4 pin. Someone can tell me the right voltage when plug the usb?? Because i dont understand if the phone charge fine or not
Click to expand...
Click to collapse
don't bother with the USB voltages. Plug it into a wall and wait.
exb0 said:
don't bother with the USB voltages. Plug it into a wall and wait.
Click to expand...
Click to collapse
I did it but dont work!
After using phone for a day when I plug in the charger it shows charging and the LED also shows up but the % doesn't change... in realty it doesn't charge even after 2hrs of charging... When we restart the phone it charges perfectly... Someone has discovered that the problem arises after we use OTG pendrive in the phone... I too suspect the same... Do we have any solution to this issue...
I have the same problem
Shabeer do you have es file explorer installed on your mobile
Same problem with mine also
I am facing too same issue..
shaabbeer said:
After using phone for a day when I plug in the charger it shows charging and the LED also shows up but the % doesn't change... in realty it doesn't charge even after 2hrs of charging... When we restart the phone it charges perfectly... Someone has discovered that the problem arises after we use OTG pendrive in the phone... I too suspect the same... Do we have any solution to this issue...
Click to expand...
Click to collapse
I too have the same problem but when i change the data cable the phone starts charging properly. Also i have checked current through Ampere App and it shows only 500 mA when coonnected eith the cable provided with the phone but when i use different cable the current goes upto 1950 mA
farhan2091 said:
I too have the same problem but when i change the data cable the phone starts charging properly. Also i have checked current through Ampere App and it shows only 500 mA when coonnected eith the cable provided with the phone but when i use different cable the current goes upto 1950 mA
Click to expand...
Click to collapse
Ok.. thank u for the information will try this and post the result here..
Same problem.
removed
Same problem to my mobile also .when I plug in the charger it shows charging and the LED also shows up but the % doesn't change even after 3hrs of charging... Do we have any solution to this issue please suggest.
sravani bedadala said:
Same problem to my mobile also .when I plug in the charger it shows charging and the LED also shows up but the % doesn't change even after 3hrs of charging... Do we have any solution to this issue please suggest.
Click to expand...
Click to collapse
Update your system to the latest version.. it will fix the charging!
even i am facing this issue and i dint find any solution to this
premrao22 said:
even i am facing this issue and i dint find any solution to this
Click to expand...
Click to collapse
Did you update your system to the latest version?if not update and check if the problem is persisting...
vimaljohnmr said:
Did you update your system to the latest version?if not update and check if the problem is persisting...
Click to expand...
Click to collapse
yes i updated my phone this problem occured after this only. Phone doesnt charge the ampere app shows 0ma and now once it is power off it doesnt starts even though i plugged in. Please Help
premrao22 said:
yes i updated my phone this problem occured after this only. Phone doesnt charge the ampere app shows 0ma and now once it is power off it doesnt starts even though i plugged in. Please Help
Click to expand...
Click to collapse
Does the notification led turn red when you connect your charger? If not contact with the service centre
vimaljohnmr said:
Did you update your system to the latest version?if not update and check if the problem is persisting...
Click to expand...
Click to collapse
vimaljohnmr said:
Does the notification led turn red when you connect your charger? If not contact with the service centre
Click to expand...
Click to collapse
I did apparently they don't have any solutions.
You need to replace usb port.
I Got it done yesterday. Charging fine now
Sent from my XT1706 using Tapatalk
My mobile is not even switching on.Then how do i update ??anyone ans plzz
Vikramvicky said:
My mobile is not even switching on.Then how do i update ??anyone ans plzz
Click to expand...
Click to collapse
Replace your usb port
Sent from my XT1706 using Tapatalk