Related
Hi Folks,
I would appreciate your help please. I'm trying to get V4A to work with Poweramp without success. I've scoured XDA and the internet for solutions.
I'm rooted running stock with Art. Has anyone running Art been able to get this combo to work? If so please help!
Thank you!
I've managed to get it to work except I have to manually turn off Poweramp's eq everytime I plug in my headphone jack or switch to BT. Anyone know how to permanently turn off Poweramp's eq? Thanks!
P.s problem solved!
I managed to turn off the pa eq! It came to me in a eureka moment as I awoke this morning. You have to unassign each preset that you have set for headphones, speaker or Bluetooth. So make sure non are showing and eq will stay off!
The combination of PA with V4A is stunning!
Unassign the presents in Poweramp or V4A?
Rose Commander said:
Unassign the presents in Poweramp or V4A?
Click to expand...
Click to collapse
In Poweramp and don't use Poweramps eq.
I am an S3 user and google'd this kind of problem and found your thread but still no luck and lastly tried to watch a short youtube vid and voila.. maybe this can help you too
http://youtube.com/watch?v=tfNMkYOsCSc
Now that I've upgraded to lollipop unfortunately I can't get V4A to work. Anyone on lollipop have any joy?
Tuffcheez said:
Now that I've upgraded to lollipop unfortunately I can't get V4A to work. Anyone on lollipop have any joy?
Click to expand...
Click to collapse
Get SElinuxchanger if your rom is set to enforcing, set it to permissive and you have to run V4A in compatibility mode - that way it works for me, however the sound quality is MAYBE not so good in this mode, in normal mode I get better sound quality I think
Same Problem
Hey guys, for the last few weeks Viper4android worked fine on my poweramp, however suddenly the processing status was set to "no".
I did all the necessary steps to enable V4A,like disabling equalizer,direct volume control etc. , so I don't know what the problem could be. V4 A does work on other music players though. But still as I prefer it to work on my Poweramp, please help me if possible to find a solution.
Trying to achieve maximum audio quality from the axon 7 and was wondering what setup you guys are using?
Has anyone successfully flashed Viper4android?
What streaming services would be best to take advantage of the Built in Dac?
How do we know if the DAC is working? 0_o
-----
So after failing on the first try I restored using the twrp backup and gave it another shot and success!
what you'll need:
1. Root and backup before doing anything (duh)
2. Then install Busy Box. Open Busy Box app and hit install on the bottom left. after it shows a successful install DON'T reboot.
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
3. Install SElinuxModeChanger. Open SElinuxModeChanger and hit Permissive option
http://forum.xda-developers.com/devdb/project/dl/?id=12506
4. Now install Viper4Android apk .Open Viper and you'll be prompted to install a4v driver. Click Yes and after it will say to reboot but DON'T reboot.
http://www.mediafire.com/download/ar5men9o5ar7inb/ViPER4Android_FX_v2401_A4.x-A6.x.apk
5. Open Dobly and make sure its off.
6.NOW reboot and your all set.
Everything is working nicely together Dobly and viper works just like it should.
Xshooter726 said:
Trying to achieve maximum audio quality output from the axon 7 and was wondering what setup you guys are using?
Has anyone successfully flashed Viper4android?
What streaming services would be best to take advantage of the Built in Dac?
How do we know if the DAC is working? 0_o
Click to expand...
Click to collapse
I just got it working after reading your post. I installed it by installing busybox(I believe this is needed, but not completely sure), then setting selinux to permissive, and then installing V4A 2.4.0.1.
I can't recommend any streaming services as I only listen to music locally on my device, but I will say it sounds MUCH better than Dolby Atmos when it's properly configured. I would recommend just turning off Dolby Atmos when listening to headphones. If you're listening to the loudspeakers V4A doesn't do too much so I would leave Dolby Atmos enabled in that case.
If you want to know if V4A is working, hit the menu button in the top right corner of the screen and tap on driver status. It should say the status is normal. If driver status says abnormal then it didn't install correctly.
scottk135 said:
I just got it working after reading your post. I installed it by installing busybox(I believe this is needed, but not completely sure), then setting selinux to permissive, and then installing V4A 2.4.0.1.
I can't recommend any streaming services as I only listen to music locally on my device, but I will say it sounds MUCH better than Dolby Atmos when it's properly configured. I would recommend just turning off Dolby Atmos when listening to headphones. If you're listening to the loudspeakers V4A doesn't do too much so I would leave Dolby Atmos enabled in that case.
If you want to know if V4A is working, hit the menu button in the top right corner of the screen and tap on driver status. It should say the status is normal. If driver status says abnormal then it didn't install correctly.
Click to expand...
Click to collapse
Installed V4A the same way you did and its working great. Only problem I'm having now is that my dolby keeps crashing when opening the app.
Is your Dolby working ok with Viper?
If so, are you able to upload a back up of your Dolby app and Dolby Service file? Mine must of got corrupted when installing Viper.
Xshooter726 said:
Installed V4A the same way you did and its working great. Only problem I'm having now is that my dolby keeps crashing when opening the app.
Is your Dolby working ok with Viper?
If so, are you able to upload a back up of your Dolby app and Dolby Service file? Mine must of got corrupted when installing Viper.
Click to expand...
Click to collapse
Mine is working fine. I was actually surprised it worked so flawlessly. Have you tried uninstalling it to see if Dolby started working again? Do you think having Dolby enabled/disabled when installing the V4A driver would have an effect? I can't remember if mine was on or not. I'm just trying to think of differences that could have happened between our installs.
I wouldn't mind uploading the Dolby app and Service file, but I'm not quite sure how. Do you just want the two Dolby backups from a Titanium Backup or do you need something more?
scottk135 said:
Mine is working fine. I was actually surprised it worked so flawlessly. Have you tried uninstalling it to see if Dolby started working again? Do you think having Dolby enabled/disabled when installing the V4A driver would have an effect? I can't remember if mine was on or not. I'm just trying to think of differences that could have happened between our installs.
I wouldn't mind uploading the Dolby app and Service file, but I'm not quite sure how. Do you just want the two Dolby backups from a Titanium Backup or do you need something more?
Click to expand...
Click to collapse
Yeah, not really sure what went wrong. Think you could be right about having it enabled when flashing Viper. I've been going at it for hours trying to get it working again lol. I've tried installing other versions of Dolby, Uninstalling Viper and wiping catch but still nothing.
If you could upload your titanium back up that would be great. It might be a unique version of Dolby that comes with our Axon's.
Xshooter726 said:
Yeah, not really sure what went wrong. Think you could be right about having it enabled when flashing Viper. I've been going at it for hours trying to get it working again lol. I've tried installing other versions of Dolby, Uninstalling Viper and wiping catch but still nothing.
If you could upload your titanium back up that would be great. It might be a unique version of Dolby that comes with our Axon's.
Click to expand...
Click to collapse
Sorry, it's going to be a bit longer. I don't have enough posts yet to link anything lol. I will when I can though.
scottk135 said:
Sorry, it's going to be a bit longer. I don't have enough posts yet to link anything lol. I will when I can though.
Click to expand...
Click to collapse
lol No problem man. Thanks for trying to help me out any ways. Its really not a big deal not having dolby when you have viper installed. Been messing with some Viper settings and the difference in audio is Huge.
Dolby also force closes for me after installing V4A. Kind of disappointing, as I really found the surround sound effect to be quite nice. I'll just go back to using Dolby for now.
dennis96411 said:
Dolby also force closes for me after installing V4A. Kind of disappointing, as I really found the surround sound effect to be quite nice. I'll just go back to using Dolby for now.
Click to expand...
Click to collapse
Updated the OP with steps on how I got it working.
Xshooter726 said:
Updated the OP with steps on how I got it working.
Click to expand...
Click to collapse
Working fine now. Thanks!
Okay, slight problem. The HiFi toggle now has no effect in any player, even the stock one. So now I'm stuck using the Snapdragon DAC.
Can you please try to install arise sound mod 3.3 and report back if the sound is now utter perfection
Arise 3.3 working perfectly here.
Sent from my ZTE A2017U using Tapatalk
Persianhawkes said:
Arise 3.3 working perfectly here.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Does it further improve the sound to a noticeable amount and can you still use Dolby & the hifi dac option.
Thank you for your reply btw
CampfireVibés said:
Does it further improve the sound to a noticeable amount and can you still use Dolby & the hifi dac option.
Thank you for your reply btw
Click to expand...
Click to collapse
For me it does improve the sound noticeably. Dolby doesn't work and haven't tried the hi-fi option. From what I've gathered Dolby only works on stock music and Poweramp. Arise 3.3 works everywhere.
Sent from my ZTE A2017U using Tapatalk
So, I installed arise numbers 3.5 and viper works fine (viper driver says processing: yes), but Dolby crashes every time I try to open it. Is dolby still required after viper is installed?
Has anyone tried VLC player yet? I tried it and it seems to work just fine with the Hi-Fi option and Dolby Atmos.
It has also great functionality: plays music (stereo/5.1) and video, supports subtitles, etc.
EDIT: ah, and I didn't root. Just installed the app. I can fiddle with Dolby settings while music is playing; video pauses when I open the settings while playing, but resumes after I close.
strifej said:
So, I installed arise numbers 3.5 and viper works fine (viper driver says processing: yes), but Dolby crashes every time I try to open it. Is dolby still required after viper is installed?
Click to expand...
Click to collapse
no, when you have properly set up viper, the dolby app is useless anyway
I'm tired of not being able to use the music player I've used the past couple years, plus Dolby Atmos turns on and off randomly each time I start my music player, or plug in my earbuds - sometimes from song to song....So I'm ready to bite the bullet and instal V4A or maybe even Arise 3.5?
When I do that, I understand that Dolby Atmos won't work.....But would it hurt anything if I uninstall it, or disable it, using TitaniumBackup?
tele_jas said:
I'm tired of not being able to use the music player I've used the past couple years, plus Dolby Atmos turns on and off randomly each time I start my music player, or plug in my earbuds - sometimes from song to song....So I'm ready to bite the bullet and instal V4A or maybe even Arise 3.5?
When I do that, I understand that Dolby Atmos won't work.....But would it hurt anything if I uninstall it, or disable it, using TitaniumBackup?
Click to expand...
Click to collapse
I've got Dolby and V4A both working just fine. The problem with Dolby seems to happen when A4V is flashed when Dolby is active. You could try turning Dolby off and freezing it. Would also be a good idea to back up the 2 Dolby files in TitaniumBackup.
I have had the tablet for just over a week and although it has some issues it is running ok. The latest issue I have noticed (among others ) is that sometimes when playing music (through any music/video player) I cannot hear anything, it just goes silent (after pressing pause/play)-the music is definitely playing as the progress bar in the music player shows so. Then when tapping the pause/play button all I hear is a ear aching crackle. Does anyone else have this issue? It doesn't happen all the time but occurs on a daily basis. A reboot fixes it (but then it eventually returns again)...
I had the same problem but i got it fixed. Turn off adapt sound. Sound->Soundquality and effects->Adapt Sound->turn off
Is it only when using earphones or also using the internal speakers?
Try pairing it to a Bluetooth speaker or earphone just to make sure that it is a software problem or not.
Alert Ts said:
I had the same problem but i got it fixed. Turn off adapt sound. Sound->Soundquality and effects->Adapt Sound->turn off
Click to expand...
Click to collapse
I have not even set up adapt sound...
sos_sifou said:
Is it only when using earphones or also using the internal speakers?
Try pairing it to a Bluetooth speaker or earphone just to make sure that it is a software problem or not.
Click to expand...
Click to collapse
I haven't noticed it when using the speakers (I rarely use these when listening to music), only with earphones. I don't have any bluetooth speakers. The fact that it works sometimes means it has to be software right? I have noticed several bugs (incl. random reboots-sd card related?), the software is the buggiest I have used in a while, I expected better from Samsung.
ShinOrochiX said:
I have not even set up adapt sound...
Click to expand...
Click to collapse
UHQ Upscaler, sry my bad, not adapt sound. If you turn it on and off you can clearly hear this snarching. AND XPOSED MODULES LIKE VIPER ARENG WORKING but idt that you have this ****ty module...
Alert Ts said:
UHQ Upscaler, sry my bad, not adapt sound. If you turn it on and off you can clearly hear this snarching. AND XPOSED MODULES LIKE VIPER ARENG WORKING but idt that you have this ****ty module...
Click to expand...
Click to collapse
I'll see how it goes. I haven't used Xposed (and any modules) for a while now, I don't root my devices anymore-those days are long gone lol.
Disabling the UHQ Upscaler (and all other music enhancements) did nothing unfortunately, I have had enough of this tablet, I will contact the retailer and see what they say.
ShinOrochiX said:
Disabling the UHQ Upscaler (and all other music enhancements) did nothing unfortunately, I have had enough of this tablet, I will contact the retailer and see what they say.
Click to expand...
Click to collapse
Hmmm...for me it helped but good luck solving this issue
Alert Ts said:
Hmmm...for me it helped but good luck solving this issue
Click to expand...
Click to collapse
I ended up returning the tablet, too many issues, incl. random reboots etc... But I got the 7" version instead as it better suits my needs plus costs half the price. :victory:
No bugs or major issues on this one.
I just tried to record a video for the first side I bought this mobile but its not recording the audio at all. Other apps from play store
Are working fine though. Any solutions ??
nichinu said:
I just tried to record a video for the first side I bought this mobile but its not recording the audio at all. Other apps from play store
Are working fine though. Any solutions ??
Click to expand...
Click to collapse
If you have that stereo speaker mod flashed, get rid of it. That's what was causing this issue when it happened to me.
xgerryx said:
If you have that stereo speaker mod flashed, get rid of it. That's what was causing this issue when it happened to me.
Click to expand...
Click to collapse
Thanks a lot dude... I updated the mod with latest version and now its working ...
Hi, I'm from Europe and yesterday I received my brand new A2017G. It's on B09 software version and OTA isnt finding anything newer. Sadly I read in many places (and tested it by myself) that only stock music player can output music to the AKM DAC. Are there any possibilities for me to achive desired result (I mean non-stock players do the same) on stock rom? I assume that I'd have to root and flash some custom rom but I would like to do it in the last resort (I use many banking apps which don't work that good with root and custom roms)
I can't hide the fact that this function is quite a dealbreaker for me. The phone is all great but if I can't use my favourite music player - for example PowerAmp, the what's the point. Stock music player is extremely lacking - and that is saying it lightly.
I have used many players which works fine (with Dolby Atmos) with the stock Rom..
Actually it's Pi music player. But you have Phonograph too and several others. Just give them a try too see it's what you want.
By the way, the last version of the stock Rom for G models is Nougat B10.
Envoyé de mon ZTE A2017G en utilisant Tapatalk
ma_ko said:
Hi, I'm from Europe and yesterday I received my brand new A2017G. It's on B09 software version and OTA isnt finding anything newer. Sadly I read in many places (and tested it by myself) that only stock music player can output music to the AKM DAC. Are there any possibilities for me to achive desired result (I mean non-stock players do the same) on stock rom? I assume that I'd have to root and flash some custom rom but I would like to do it in the last resort (I use many banking apps which don't work that good with root and custom roms)
I can't hide the fact that this function is quite a dealbreaker for me. The phone is all great but if I can't use my favourite music player - for example PowerAmp, the what's the point. Stock music player is extremely lacking - and that is saying it lightly.
Click to expand...
Click to collapse
JLLE said:
I have used many players which works fine (with Dolby Atmos) with the stock Rom..
Actually it's Pi music player. But you have Phonograph too and several others. Just give them a try too see it's what you want.
By the way, the last version of the stock Rom for G models is Nougat B10.
Envoyé de mon ZTE A2017G en utilisant Tapatalk
Click to expand...
Click to collapse
All apps can use the AKM DAC, actually. if you don't believe me go to the sound toggle and, well, toggle it a few times. Now hi-res is another matter, but I believe you are not talking about that specifically. if you are, then only Neutron and maybe those apps jlle mentioned work (i.e. not poweramp)
Just use Poweramp if you don't care about hi-res files and that stuff
The question is - I honestly don't know. I just wanted good audio quality. At first I installed poweramp, listened to some songs at the sound was decent. However when during playback I went to android settings -> sound -> headset hifi and switched between super and standard nothing happened. There was no change in music. I assume it's a setting for headphones only but I tested several pairs and nothing. But when I used stock music player I could toggle that setting with audible effect. Another thing (I guess) is Dolby icon visible when you pull down status bar. Is it the same as Dolby Atmos in sound settings? Does it works when using phone's speakers only or you can use it with headphones also? Anyway, on poweramp tapping it brings no change (it won't activate) whereas in stock player it works splendidly...
ma_ko said:
Is it the same as Dolby Atmos in sound settings? Does it works when using phone's speakers only or you can use it with headphones also? Anyway, on poweramp tapping it brings no change (it won't activate) whereas in stock player it works splendidly...
Click to expand...
Click to collapse
It's the same and it works with the speaker or headphons. In speaker I would leave Dolby on,does it's job quite well with it but for headphones I'm turning it off to take use of the AKM dac/super mode,but to really hear a difference you've got to have a pair of high impedance headphones.Also in Poweramp there should be a setting somewhere that makes Dolby work again,but may turn poweramps equalizer off, but I don't know where/what the setting is called since I'm only using spotify atm.
F.Y.I., Poweramp only works with HIFI if you use the beta, and include a couple work-arounds in your build.prop. Not the easiest thing in the world to get running, but it sounds great once you do.
Dolby and Hi-Fi audio quality are two totally different things. Dolby is the separate audio processing software that works on both speakers and headphones, but does not get too well with Poweramp, while Hi-Fi audio is a setting for choosing which audio processor outputs when using headphones ( the integrated Snapdragon audio proc or the AKM one).
On my A2017G there is a pretty subtle, but clear difference when using Poweramp, between the two Hi-Fi settings: the Super one is a bit louder, has more bass and better soundstage. This can be changed without problems when listening to music using Poweramp.
The Dolby software, though, sometimes can be activated, but then it cannot be deactivated until I stop the music and also the interface still shows that it's deactivated, even though the sound has changed.
My recommendation is to just use the Hi-Fi thing in Settings with the PowerAmp EQ because the Dolby software is not too versatile. This sounds really nice with my headphones.
pinkywinky said:
F.Y.I., Poweramp only works with HIFI if you use the beta, and include a couple work-arounds in your build.prop. Not the easiest thing in the world to get running, but it sounds great once you do.
Click to expand...
Click to collapse
naw. It doesn't work at all. The workaround I posted just reroutes the audio path in some obscure way, and it makes sound better out of it (for some reason the equalizer makes more difference) but the sound goes into a mixer path and gets downsampled to 48k. You get to use Viper4Android and Dolby with it though.
It also kills the camera
ma_ko said:
The question is - I honestly don't know. I just wanted good audio quality. At first I installed poweramp, listened to some songs at the sound was decent. However when during playback I went to android settings -> sound -> headset hifi and switched between super and standard nothing happened. There was no change in music. I assume it's a setting for headphones only but I tested several pairs and nothing. But when I used stock music player I could toggle that setting with audible effect. Another thing (I guess) is Dolby icon visible when you pull down status bar. Is it the same as Dolby Atmos in sound settings? Does it works when using phone's speakers only or you can use it with headphones also? Anyway, on poweramp tapping it brings no change (it won't activate) whereas in stock player it works splendidly...
Click to expand...
Click to collapse
it usually lets you change between super and standard . You should find a difference in the soundstage and better, more defined bass.
The "standard DAC" (also akm, seemingly, but powersaving-oriented) is used for the speakers, and Atmos is designed for phone speakers too. You CAN use it on headphones, but it'll give you a bunch of noise. It doesn't work with Poweramp unless you use 704 and follow my guide on how to "enable hi-fi" on it (the camera will break, you'll need to use another camera app). But it's not worth it unless you use Viper4Android
---------- Post added at 01:53 AM ---------- Previous post was at 01:48 AM ----------
ma_ko said:
The question is - I honestly don't know. I just wanted good audio quality. At first I installed poweramp, listened to some songs at the sound was decent. However when during playback I went to android settings -> sound -> headset hifi and switched between super and standard nothing happened. There was no change in music. I assume it's a setting for headphones only but I tested several pairs and nothing. But when I used stock music player I could toggle that setting with audible effect. Another thing (I guess) is Dolby icon visible when you pull down status bar. Is it the same as Dolby Atmos in sound settings? Does it works when using phone's speakers only or you can use it with headphones also? Anyway, on poweramp tapping it brings no change (it won't activate) whereas in stock player it works splendidly...
Click to expand...
Click to collapse
it usually lets you change between super and standard . You should find a difference in the soundstage and better, more defined bass.
The "standard DAC" (also akm, seemingly, but powersaving-oriented) is used for the speakers, and Atmos is designed for phone speakers too. You CAN use it on headphones, but it'll give you a bunch of noise. It doesn't work with Poweramp unless you use 704 and follow my guide on how to "enable hi-fi" on it (the camera will break, you'll need to use another camera app). But it's not worth it unless you use Viper4Android
Choose an username... said:
naw. It doesn't work at all. The workaround I posted just reroutes the audio path in some obscure way, and it makes sound better out of it (for some reason the equalizer makes more difference) but the sound goes into a mixer path and gets downsampled to 48k. You get to use Viper4Android and Dolby with it though.
It also kills the camera
Click to expand...
Click to collapse
I guess I'm a little confused here. I've feel like I've had so many discussions on what actually uses the HIFI DAC on this forums (you seem to be one of the few that know we use 2 different AKMs). What procedure are you talking about though? Currently I use AINUR, which supposedly someone with an AXON worked with to get the audio down the right path, and I also use the work around to get Poweramp to use the HIFI mode. From what I heard this should output 24bit 96khz. Unless you are implying that poweramp downgrades audio then upsamples it?
In any case, all 3rd party ROMs use the HIFI DAC by default. Maybe not the full extent, but to be honest the most important thing for HIFI music is mastering. But even so, without full DAC control I still think the phone sounds much better than most others. I do want to try out that custom "ROM" though, see what the controls do.
For my ears, using the bare bones ZTE player produces better sound with headphones, but it just isn't worth dealing with the limits of that player.
pinkywinky said:
I guess I'm a little confused here. I've feel like I've had so many discussions on what actually uses the HIFI DAC on this forums (you seem to be one of the few that know we use 2 different AKMs). What procedure are you talking about though? Currently I use AINUR, which supposedly someone with an AXON worked with to get the audio down the right path, and I also use the work around to get Poweramp to use the HIFI mode. From what I heard this should output 24bit 96khz. Unless you are implying that poweramp downgrades audio then upsamples it?
In any case, all 3rd party ROMs use the HIFI DAC by default. Maybe not the full extent, but to be honest the most important thing for HIFI music is mastering. But even so, without full DAC control I still think the phone sounds much better than most others. I do want to try out that custom "ROM" though, see what the controls do.
Click to expand...
Click to collapse
The "procedure" is the workaround you use. It doesn't do what you believe. Poweramp seems to believe that it is offloading via a direct path but it is going through a mixer path. Therefore Poweramp (maybe) processes at high resolution, but it gets downgraded at the output, and you get 48kHz. If you don't believe me that the output is 48 use media.audio_flinger
Ainur has the AK4490 patch integrated. It's no use since a) stock ROMs use it (they have the switch) and b) since long ago all ROMs have integrated the AK4490 patch on them.
You can get Hi-Res on stock and custom M and N ROMs but you have to use Neutron which is horrible. Doesn't work in O ROMs at the moment
i think we had a big discussion with the 2 akm's thing before though, but someone asked ZTE and they replied that they also used the DAC that's inside the AK4961. so i dunno
All you need is this.
https://play.google.com/store/apps/details?id=com.jetappfactory.jetaudioplus
And optionally get the AM3D plugin from within the player. It has everything you could need, even AGC. I've tried so many players and always come back to Jet. Neutron is more flawed from a user interaction perspective and I don't like it.
---------- Post added at 11:17 AM ---------- Previous post was at 11:12 AM ----------
argblah said:
For my ears, using the bare bones ZTE player produces better sound with headphones, but it just isn't worth dealing with the limits of that player.
Click to expand...
Click to collapse
I usually keep the stock music app disabled but every now and then Jet gets an update so I enable and listen to stock, then listen to Jet.
Every time, Jet sounds better and I disable stock app again.
I keep Dolby Atmos turned off using BT or 3.5 jack for music and have it on with the inbuilt speakers or if playing a video whatever the audio listening device.
I've been using Gone Mad player for a while now, quite happy with it. Works great with BT in car, headphones, hirez etc.
https://play.google.com/store/apps/details?id=gonemad.gmmp
I just use the deep buffer remover mod from XDA to have the Super DAC setting working for all headphone output. I posted about it ages ago back here https://forum.xda-developers.com/axon-7/how-to/list-music-players-outputting-to-akm-dac-t3695058
Sent from my ZTE Axon 7 using XDA Labs
https://www.extreamsd.com/index.php/hires-audio-driver
http://www.extreamsd.com/index.php/uapp-trial
aosp said:
https://www.extreamsd.com/index.php/hires-audio-driver
http://www.extreamsd.com/index.php/uapp-trial
Click to expand...
Click to collapse
thanks a lot for the links. I just purchased the Pro from Play Store after I tested the same song versus neutron player on a pair of ath m50x.
the sound on USB audio is much much better.
I'm waiting to test it on my gf's htc 10 when she's home, should be even better
I highly recommend getting the trial guys