Database Users

[GPe Lollipop 5.1] 1click Installer - rom, root, twrp [AIO][XT1032]

Google Play Edition Lollipop 5.1
1 Click Installer
Root, Custom Recovery and change Boot Logo All-in-One Pack
Created for personal usage, just share it now for those
who want to upgrade to Lollipop 5.1 from 5.0.1, stock motorola 5.0.2
or custom roms like CM12, ResurrectionRemix, BlissPop, Euphoria OS, etc
The easiest way how to install rom, root, recovery
CONTAINS
GPe 5.1 Lollipop
15 sec Adb Setup for install ADB, Fastboot and Drivers
TWRP recovery 2.8.6.0
SuperSU 2.46
Dark Moto Logo
&
Restore to Default (stock recovery, logo)
USAGE
Download the archive and extract
From "TOOLS" folder run (install) "adb-setup-1.4.2.exe
Reboot your phone to the download mode (power+volume down)
Connect via usb cable to pc
From GPe_5.1_OneClick run (double click on) Flash_GPe_5.1.bat
Wait until it finish, than reboot your phone
ROOT & TWRP
Copy the "UPDATE-SuperSU-v2.46.zip" from ROOT-RECOVERY folder to your virtual sd card
Reboot to the download mode (power+volume down) and connect via usb cable to pc
From ROOT-RECOVERY folder run "flash_recovery.bat"
than select recovery and from installed twrp install "UPDATE-SuperSU-v2.46.zip"
CHANGE BOOT LOGO
Download mode + connected usb cable and from folder Dark_MotoLogo run "flash_logo.bat"
RESTORE BOOT LOGO & STOCK RECOVERY
From "Default" folder run "flash_logo.bat" or "flash_recovery.bat"
DOWNLOAD
GPe_5.1.rar
And as always:
I am not responsible for any trouble that may occure by using this guide, such as your phone exploding, your cat dying... you know.
If you're a noob, ask before doing anything you don't know!
That's what XDA threads are for.
I will do my best to give any support needed.
CREDIT AND THANKS
Google for rom
@qd42 for FileFactory link of GPe 5.1
@Chainfire for SuperSU
TeamWin for TWRP recovery
@caitsith2 for Motorola Boot Logo Maker
@Snoop05 for 15 seconds ADB Installer
​

-reserved- just in case

Good job!
Can I use this installer when my XT1032 is running Blisspop 2.1 (5.0.2) with TWRP already? Or this can be used only on stock non-rooted device.
thx

pnuda said:
Good job!
Can I use this installer when my XT1032 is running Blisspop 2.1 (5.0.2) with TWRP already? Or this can be used only on stock non-rooted device.
thx
Click to expand...
Click to collapse
Yep, you can use it but make a backup from your personal files (videos, pictures, music, etc.) because it'll wipe your data and internal storage.

Do you have UPDATE-SuperSU-v2.46.zip on it's own? I have installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip and TWRP as well seperatly but just need to root it. So just need that file not complete ROM
---------- Post added at 11:35 PM ---------- Previous post was at 10:56 PM ----------
error in rom batch file, it's pointing to windows\system32 and failing
also read should use mfastboot not fastboot?
also your mfastboot flash recovery twrp-2.8.6.0-falcon.img is non GPE version when I flash with yours I get vsync like tearing. Flash to twrp-2.8.6.0-falcon_GPE.img and stable screen
Superuser works

Will I have any problem if after flashing this I'll try to flash the stock motorola 5.1 fw when it wii be out?

Hello,
Thanks for taking your time to create this.
I have already updated my moto G 1032 to lollipop 5.1 using a method as shown in the attachment.
Do i need to do the entire process again?

Maybe it's a stupid question but, will this work for the xt1034 version?
To be more specific and avoid future questions like this, does every rom for the xt1032 work for xt1034?
Thank you

Berties123 said:
Do you have UPDATE-SuperSU-v2.46.zip on it's own? I have installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip and TWRP as well seperatly but just need to root it. So just need that file not complete ROM
---------- Post added at 11:35 PM ---------- Previous post was at 10:56 PM ----------
error in rom batch file, it's pointing to windows\system32 and failing
also read should use mfastboot not fastboot?
also your mfastboot flash recovery twrp-2.8.6.0-falcon.img is non GPE version when I flash with yours I get vsync like tearing. Flash to twrp-2.8.6.0-falcon_GPE.img and stable screen
Superuser works
Click to expand...
Click to collapse
Ahh buddy, about your errors please read the op carefully. Under thanks you can find links, click on it please and about twrp also. I'm using only official releases not unofficials
BurningKoala said:
Will I have any problem if after flashing this I'll try to flash the stock motorola 5.1 fw when it wii be out?
Click to expand...
Click to collapse
No, you can flash moto 5.1 directly whet it will be out.
reganEZ said:
Hello,
Thanks for taking your time to create this.
I have already updated my moto G 1032 to lollipop 5.1 using a method as shown in the attachment.
Do i need to do the entire process again?
Click to expand...
Click to collapse
Nope, this is only easiest way how to upgrade to 5.1 and contains the whole 5.1 firmware not only the updates.

Hello,
My Moto is XT1032 From Tesco GB retail. Can I use this guide to take 5.1 ? Thanks

Same question. There is no word about bootloader. Does it have to be unlocked?

BlackBoneBla said:
Hello,
My Moto is XT1032 From Tesco GB retail. Can I use this guide to take 5.1 ? Thanks
Click to expand...
Click to collapse
Yes.
Rendoqoz said:
Same question. There is no word about bootloader. Does it have to be unlocked?
Click to expand...
Click to collapse
Of course.
▪◼ Tapatalk ♦ Moto G ◼▪

@ronin790 i have a new Moto G X1032 16GB 4.4.4
what i need do first to apply this?
1.- open bootloader
what's next?

zero995 said:
@ronin790 i have a new Moto G X1032 16GB 4.4.4
what i need do first to apply this?
1.- open bootloader
what's next?
Click to expand...
Click to collapse
Just follow mentioned instructions from op.
▪◼ Tapatalk ♦ Moto G ◼▪

Difference between stock Motorola rom and GPE In battery life and performance?

fer2503 said:
Difference between stock Motorola rom and GPE In battery life and performance?
Click to expand...
Click to collapse
Noone can know that when there is no Moto 5.1 firmware yet.
But i assume that the battery life as well as performance should be almost equal. (If they don't screw it up ...I hope they won't)

Flash_GPE_5.1.bat errors
I'm on Motorola stock 5.02 firmware and I'm getting errors when running Flash_GPE_5.1.bat process. It seems I'm getting error for the following command line:-
fastboot.exe flash partition gpt.bin
fastboot.exe erase cache
fastboot.exe oem fb_mode_clear
Are these errors critical or can I just ignore them.

Factory Reset?
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.

Tomazon said:
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Click to expand...
Click to collapse
Don't know the answer but mine does the same having upgraded using this method.

Tomazon said:
Hi, I'm currently on 5.1 GPe with 41.19 stock Bootloader, no Root, just unlocked BL . I followed a Youtube video and everything runs great BUT.. i can't do factory reset on the device (must be done via fastboot).
Is it possible to Factory Reset with your guide/rom?, if yes... Can I reinstall your ROM over the one I currently have?
Thanks in advance mate. Great Job.
Click to expand...
Click to collapse
Sorry, i don't know. You can try it, but maybe something wrong with partitions after 5.0.2.
spikey_w said:
I'm on Motorola stock 5.02 firmware and I'm getting errors when running Flash_GPE_5.1.bat process. It seems I'm getting error for the following command line:-
fastboot.exe flash partition gpt.bin
fastboot.exe erase cache
fastboot.exe oem fb_mode_clear
Are these errors critical or can I just ignore them.
Click to expand...
Click to collapse
Just ignore and reboot. If everything works fine don't care about it.
▪◼ Tapatalk ♦ Moto G ◼▪

[NANDROID] Motorola Marshmallow Soak test v5 - Dec 13 - makes other phones jelleh!!

This is considered a beta rom. Things may break, things may change, and your phone may brick or turn into a portable toaster. I'm not responsible.
You are flashing this at your own risk!!!
This is a nandroid backed up from a US 2gb/16gb xt1540. It may or may not work on all models...that is to be determined.
Confirmed compatible variants:
XT1540 (US 1/8GB and 2/16GB) (Canada)
XT1541 (UK) (France)
(if your variant is not here it only means it's either not tested or not reported working. please test and report back!)
If you are unable to boot or obtain any signals after flashing this, it is highly recommended you flash a full factory image intended for your specific model and wait for another solution.
This is only meant to be a temporary fix while we wait for the big guys to build us a standard rom.
PLEASE READ THE GUIDE BELOW!!! Some things have changed with v3
How to install:
Extract the .tar.gz archive like any zip
copy the folder to the directory where your other TWRP nandroids are on your internal storage or sd card (TWRP/BACKUPS/ZZY222____/) in here you will see folders with dates, times, rom names and info, etc in the folder names...copy the folder you extracted to this directory.
boot to TWRP
restore this backup
if coming from anything but a previous soak test, wipe userdata
wipe cache and dalvik cache
flash systemless root zip SuperSU v2.61 (optional) DO NOT flash any lower SuperSU version!!
reboot (Please be patient...it's a VERY long wait. If you pass 10 minutes waiting and it hasn't booted, force a reboot by holding the power button)
profit!
***It is HIGHLY recommended US xt1540 users update their radio. It is not required to run this soak test, though. THIS IS ONLY FOR US USERS!!!!! DO NOT FLASH THIS IF YOU ARE NOT IN THE UNITED STATES!!!!***
See this post for the updated soak test modem.img files (just flash to the modem partition with fastboot and reboot the device)
http://forum.xda-developers.com/201...-devs-moto-g3-xt1540-soak-test-files-t3255643
For anyone who is not in the contiguous USA (48 states) but still has xt1540 and would like to test the modem above, you can use the app linked below to back up your modem partition directly from your device before you try the new modem. This way you don't have to download a factory rom to get the right modem.img if you don't already have one backed up on your computer. You have to be rooted to use it.
Wanam Backup & Restore app (free)
How to root:
Please see this thread for the download:
http://www.xda-developers.com/update-to-snapprefs-xposed-module-includes-17-instagram-like-filters
The newest root method provided by chainfire does not touch the system partition. To the end-user, the only change is that when you flash a new kernel you must re-flash superSU....not your rom!!! What this means to us in this case is we can use the stock kernel provided with the soak test, flash the superSU zip, and have root, just like a Nexus device without having to wait for a permissive kernel!
*****After flashing the new systemless root zip you will be prompted to install superSU before the device reboots. DO NOT ALLOW IT TO INSTALL!!!!!! If you allow it to install with this option you will get a bootloop*****
**To view your device storage from your computer, open your notification shade, click the "USB for _____" notification, and select "transfer files (MTP)". It won't stick through a reboot, so you'll have to do this each time you boot.....the same thing goes if you unplug the cable.
Download:
https://drive.google.com/file/d/0ByE999IDa0JnaEpnX0FCRjNxX28

Gonna try it on my xt1540. Just one question about the procedure. I just restore backup directly? Without wiping anything? Or should i wipe system at least?

feligoni said:
Gonna try it on my xt1540. Just one question about the procedure. I just restore backup directly? Without wiping anything? Or should i wipe system at least?
Click to expand...
Click to collapse
TWRP wipes for you automatically in the restore process. You don't have to wipe system manually. Just restore wipe userdata and reboot!

hp420 said:
TWRP wipes for you automatically in the restore process. You don't have to wipe manually. Just restore and reboot!
Click to expand...
Click to collapse
Awsome. Im downloading the file right now, gonna report back when i try it

feligoni said:
Awsome. Im downloading the file right now, gonna report back when i try it
Click to expand...
Click to collapse
I'm reuploading a new nandroid...please wait to install the new version

hp420 said:
I'm reuploading a new nandroid...please wait to install the new version
Click to expand...
Click to collapse
Haha, ok. I was about to restore te backup, but i'll wait.

I'm very sorry for any inconvenience guys. I know it was a very large download. This next one is about half the size.

hp420 said:
I'm very sorry for any inconvenience guys. I know it was a very large download. This next one is about half the size.
Click to expand...
Click to collapse
Dont worry, i've got pretty good download speed at work hehe

All done! new link in the OP guys...go nuts

610mb??

Sarath280 said:
610mb??
Click to expand...
Click to collapse
it's system and boot only, and compressed.
it's all there, trust me

hp420 said:
All done! new link in the OP guys...go nuts
Click to expand...
Click to collapse
Things look good, right now it's in the eternal process of optimizing apps Just wondering, by upgrading like this, i will get updates via ota? or only if u keep updating it?

feligoni said:
Things look good, right now it's in the eternal process of optimizing apps Just wondering, by upgrading like this, i will get updates via ota? or only if u keep updating it?
Click to expand...
Click to collapse
We will only get an update if our friend who is an official tester shares it with us.

Okay, it worked. I booted up perfectly, but as i needed my phone completely stable for today i reverted back to LP. But it worked well I think ill wait for a stable version though, it kind of lagged compared to LP.

feligoni said:
Okay, it worked. I booted up perfectly, but as i needed my phone completely stable for today i reverted back to LP. But it worked well I think ill wait for a stable version though, it kind of lagged compared to LP.
Click to expand...
Click to collapse
Glad it worked!! Thanks for reporting back

it booted on xt1550 ril not working

Sarath280 said:
it booted on xt1550 ril not working
Click to expand...
Click to collapse
have you tried manually entering your carrier's APN information?

I'm having issues extracting the System folder from the backup.
Any ideas? Trying to cook up a flashable ROM for easier testing.

l3ones said:
I'm having issues extracting the System folder from the backup.
Any ideas? Trying to cook up a flashable ROM for easier testing.
Click to expand...
Click to collapse
you can extract with any of the popular file managers for android right on your phone if you'd like. It may take a little longer, but it will work.

hp420 said:
you can extract with any of the popular file managers for android right on your phone if you'd like. It may take a little longer, but it will work.
Click to expand...
Click to collapse
Apparently it was just an issue with 7-zip, WinRAR handled it perfectly.
This is my first time making a flashable ROM but it should be up later today.

[GUIDE]Restoring Honor 7x (L22) back to stock for OTA (required partitions only)

This will restore your Indian variant Honor 7x back to stock, in case you have rooted or flashed TWRP before. After this you can get OTA updates and they will flash fine. If you want to manually flash OTA updates, you can continue to next video after watching this
I suggest you to watch it carefully and do same as I did to prevent any damages.
Downloads:
https://goo.gl/8TKYoT
Password for the zip is shared in telegram group:
MOD EDIT: LINK REMOVED
Also files access will be granted in the group for now, later they will be made public.
Text guide coming soon.
Watch on YouTube (not monetized)

Sudeep Duhoon said:
This will restore your Indian variant Honor 7x back to stock, in case you have rooted or flashed TWRP before. After this you can get OTA updates and they will flash fine. If you want to manually flash OTA updates, you can continue to next video after watching this
I suggest you to watch it carefully and do same as I did to prevent any damages.
Downloads:
https://goo.gl/8TKYoT
Password for the zip is shared in telegram group:
MOD EDIT: LINK REMOVED
Also files access will be granted in the group for now, later they will be made public.
Text guide coming soon.
Click to expand...
Click to collapse
Thanks for the helpfull information.
I have the files for BND-L24 uploaded and want to share same method of restore , for US version. As the method is the same.
Would it be ok to link to your thread from a new thread with L24 files attached , or add the backup here and just change the title?

mrmazak said:
Thanks for the helpfull information.
I have the files for BND-L24 uploaded and want to share same method of restore , for US version. As the method is the same.
Would it be ok to link to your thread from a new thread with L24 files attached , or add the backup here and just change the title?
Click to expand...
Click to collapse
Do as you like, I am good with anything.

Sudeep Duhoon said:
Do as you like, I am good with anything.
Click to expand...
Click to collapse
Ok. I like to keep thing simple. And to not complicate things as much as possible.
I will put this link to the L24 backed up images here.
File host folder with ==>BND-L24C567B140<== files

mrmazak said:
Ok. I like to keep thing simple. And to not complicate things as much as possible.
I will put this link to the L24 backed up images here.
File host folder with ==>BND-L24C567B140<== files
Click to expand...
Click to collapse
Thank you so much!! I've been looking for this all day yesterday!!

Will i have to flash all this file by twrp?
mrmazak said:
Ok. I like to keep thing simple. And to not complicate things as much as possible.
I will put this link to the L24 backed up images here.
File host folder with
Click to expand...
Click to collapse
Will i have to flash all this files by twrp? Liie flashing system.zip as system and flashing other images in partition? And if yes then there is other zip file 482 Mb how to flash it? Also in system ?
Will i be able to go to Emui 6 from Emui 8? I had manually flashed oreo.
Thanks

suryaxcharel said:
Will i have to flash all this files by twrp? Liie flashing system.zip as system and flashing other images in partition? And if yes then there is other zip file 482 Mb how to flash it? Also in system ?
Will i be able to go to Emui 6 from Emui 8? I had manually flashed oreo.
Thanks
Click to expand...
Click to collapse
All the post I see about manually flashing Oreo say you CAN NOT return to emui 5. So I would believe no
**EDIT**
I see now on firmware finder there are roll-back to emui 5.1 full-ota packages.
right now only for
BND-AL00
BND-AL10
BND-TL10
but perhaps after flashing that full ota to get partition table back , then follow this method from here to get correct regional specific parts back.
All still untested at this point

Suppose if I install Other rom first like AOSP or RR?
mrmazak said:
All the post I see about manually flashing Oreo say you CAN NOT return to emui 5. So I would believe no
Click to expand...
Click to collapse
Suppose if i install other rom RR or Aosp from Emui.and then can i ftry this method?
Thanks

suryaxcharel said:
Suppose if i install other rom RR or Aosp from Emui.and then can i ftry this method?
Thanks
Click to expand...
Click to collapse
I have no first hand information. Just that for RR you need to first update to Oreo, so same as before, the information at this point is, NO , roll-back is not able.

need help please
suryaxcharel said:
Will i have to flash all this files by twrp? Liie flashing system.zip as system and flashing other images in partition? And if yes then there is other zip file 482 Mb how to flash it? Also in system ?
Will i be able to go to Emui 6 from Emui 8? I had manually flashed oreo.
Thanks
Click to expand...
Click to collapse
What if you used recovery and went to stock but you don't have system updater and when you try to update firmware it keeps failing is there anyway to fix this on my bnd-l24?
P.S no longer have twrp

Can I try it on my Honor 7X BND-AL10 variant.??Please reply

riteshnaik77 said:
Can I try it on my Honor 7X BND-AL10 variant.??Please reply
Click to expand...
Click to collapse
Your other post show you are on Oreo. This method, files linked are Android nougat.
You need to replace twrp with stock recovery, then wipe cache from there. This should fix your bootloop ,caused by wipeimg cache in twrp. Unless there is more to the story than you tell.

mrmazak said:
Your other post show you are on Oreo. This method, files linked are Android nougat.
You need to replace twrp with stock recovery, then wipe cache from there. This should fix your bootloop ,caused by wipeimg cache in twrp. Unless there is more to the story than you tell.
Click to expand...
Click to collapse
OHHHHH!!!!..Thank you!
This is what I actually did so far.
1)I am on BND AL10 Oreo.
2)Unlocked the bootloader & rooted device.
3)Tried to flash Xposed using Magisk,Then my phone went to bootloop.
4)I tried to flash RR rom using fastboot mode.Then my phone gone mad, Now I can access TWRP ,But only for 10 sec.
5)PLEASE GUIDE ME TO A COMPLETE GUIDE WHERE I CAN FRESH START.
----------------------------------------------------------------------------------------------------------------------

riteshnaik77 said:
OHHHHH!!!!..Thank you!
This is what I actually did so far.
1)I am on BND AL10 Oreo.
2)Unlocked the bootloader & rooted device.
3)Tried to flash Xposed using Magisk,Then my phone went to bootloop.
4)I tried to flash RR rom using fastboot mode.Then my phone gone mad, Now I can access TWRP ,But only for 10 sec.
5)PLEASE GUIDE ME TO A COMPLETE GUIDE WHERE I CAN FRESH START.
----------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Well it twrp is not staying on, then fastboot will have to be the method to recover
Hope this will work
fastboot format cache
fastboot format userdata
If those not work, or not allowed try
fastboot -w

mrmazak said:
Well it twrp is not staying on, then fastboot will have to be the method to recover
Hope this will work
fastboot format cache
fastboot format userdata
If those not work, or not allowed try
fastboot -w
Click to expand...
Click to collapse
Thanks alot for your quick reply.Lemme try the method you have shared.

I did the steps in post. Was successfully able to downgrade from Oreon to Naugat. But Ota failed and phone into boot loop. Any suggestion

kavena78 said:
I did the steps in post. Was successfully able to downgrade from Oreon to Naugat. But Ota failed and phone into boot loop. Any suggestion
Click to expand...
Click to collapse
the downgrade is tricky , if not done with full downgrade files. It is pretty much a half full update, then restore a backup. There are many things that could cause trouble with this.
Did you try to factory reset after failed OTA?

mrmazak said:
the downgrade is tricky , if not done with full downgrade files. It is pretty much a half full update, then restore a backup. There are many things that could cause trouble with this.
Did you try to factory reset after failed OTA?
Click to expand...
Click to collapse
Unfortunately I do not have backup (can you share it pls if you have) after factory reset also same issue.

kavena78 said:
Unfortunately I do not have backup (can you share it pls if you have) after factory reset also same issue.
Click to expand...
Click to collapse
backup files are linked in the op

mrmazak said:
backup files are linked in the op
Click to expand...
Click to collapse
Op is that 1st post? It has link to update files in rar format

Final Official Oreo 8.1.0 Release - OPP28.85-16 OTA

I've just captured the Official OPP28.85-16 OTA for retail cedric and I'm posting it here. I'm on retbr channel but this will work on any retail device. If you're on another updated channel, I don't know what would happen if you installed this.
Notice that to install this YOU MUST be on NPPS25.137-93-2-5 to install these, since OTA's are not full firmwares like fastboot files, but instead they're patchings tailored to be applied upon a specific firmare - NPPS25.137-93-2-5 in this case.
Another particular detail is that the OTA file (gotten directly from my credric) lists the Blur Version as Blur_Version.25.361.10.cedric.retail.en.US, but curiously, the fastboot version for the same firmware ( which you can download here) lists it as Blur_Version.28.41.15.cedric.retail.en.US
Someone also reported in another thread that they just sideloaded this upon the Second Soak test. I wouldn't doubt it since this is what should happen to regular soak testers, but if you do it, DO IT AT YOUR OWN RISK
I also won't post instructions on how to install this since they're already available here
Download
Gdrive: https://drive.google.com/file/d/149hrGFpuWUgAvJr02McYNwJVaqSvllYO/view?usp=sharing
That's it.

changelog?

Has anyone already tried it?

Since this is a (Delta) OTA Update that expects NPPS25.137-93-2-5 (Blur_Version.25.361.10) it should be correctly named "block_delta-ota-Blur_Version.25.361.10-28.41.15.cedric.retail.en.US" in my view.
Someone also reported in another thread that they just sideloaded this upon the Second Soak test.
Click to expand...
Click to collapse
I'm on the 2nd soak test update OPP28.85-13.
Just tried to flash the update from SD card and ADB sideload.
Update failed due to wrong version.
E3002: Package expects build thumbprint of 8.1.0/OPP28.85-16/0400:user/release-keys or 7.0/NPPS25.137-93-2-5/10:user/release-keys; this device has 8.1.0/OPP28.85-13/789a:user/release-keys.

JoeDoe0 said:
Since this is a (Delta) OTA Update that expects NPPS25.137-93-2-5 (Blur_Version.25.361.10) it should be correctly named "block_delta-ota-Blur_Version.25.361.10-28.41.15.cedric.retail.en.US" in my view.
I'm on the 2nd soak test update OPP28.85-13.
Just tried to flash the update from SD card and ADB sideload.
Update failed due to wrong version.
E3002: Package expects build thumbprint of 8.1.0/OPP28.85-16/0400:user/release-keys or 7.0/NPPS25.137-93-2-5/10:user/release-keys; this device has 8.1.0/OPP28.85-13/789a:user/release-keys.
Click to expand...
Click to collapse
seems like it can be updated. from. soak test then, but I never heard nor did I find anything about OPP25. 85-16 build. maybe there was a third soak test and we don't know about it

Works perfect
Hi,
i used the above Image in Germany and i am now on Oreo 8.1
Everything works perfect. First i had a little bit trouble due to an old Version of ADB Tools, but after Update ADB to current Version the Update to Oreo took something around 30min.
Build 28.85-16
Oreo 8.1
Software Channel reteu
Patch Level 01.08.2018

bori321 said:
Hi,
i used the above Image in Germany and i am now on Oreo 8.1
Everything works perfect. First i had a little bit trouble due to an old Version of ADB Tools, but after Update ADB to current Version the Update to Oreo took something around 30min.
Build 28.85-16
Oreo 8.1
Software Channel reteu
Patch Level 01.08.2018
Click to expand...
Click to collapse
On which version you were before update?

Firmware
Hi,
before update to Oreo i flashed NPPS25.137-93-2-5 Firmware and after that the Image from this thread.
Worked perfect.
Alex
I tried to post a Screenshot but it was not possible because i am a new member...

Update failed due to wrong version.
E3002: Package expects build thumbprint of 8.1.0/OPP28.85-16/0400:user/release-keys or 7.0/NPPS25.137-93-2-5/10:user/release-keys; this device has 8.1.0/OPP28.85-13/789a:user/release-keys.
Click to expand...
Click to collapse
freeZbies said:
seems like it can be updated. from. soak test then, but I never heard nor did I find anything about OPP25. 85-16 build. maybe there was a third soak test and we don't know about it
Click to expand...
Click to collapse
Update fails from OPP28.85-13 since it expects either OPP28.85-16 which is the latest Oreo build (that I want to update to) or the latest Nougat NPPS25.137-93-2-5.
There is no OPP25. 85-16 build! I think you misread the error message.
BTW I updated from OPP28.85-13 to -16 using the full fastboot version and it worked out perfectly.

JoeDoe0 said:
Update fails from OPP28.85-13 since it expects either OPP28.85-16 which is the latest Oreo build (that I want to update to) or the latest Nougat NPPS25.137-93-2-5.
There is no OPP25. 85-16 build! I think you misread the error message.
BTW I updated from OPP28.85-13 to -16 using the full fastboot version and it worked out perfectly.
Click to expand...
Click to collapse
yeah, I actually misread it, now I see it.
Anyways, flashing it from fastboot doesn't prove anything. but seems like Cedric can be upgraded from the soak test to final version using this ota. Idk because I used fastboot myself too, since I had already modified my system partition.

AsusZenFone3Deluxe said:
changelog?
Click to expand...
Click to collapse
seriously?
stop joking, Motorola doesn't release changelogs.
but I'll try:
updated from nougat to oreo?
duhhh

how is speaker quality in this build ?
because there is some issues in previous oreo builds

Speaker
Hi,
i would say that for my ears the speaker sounds better than it was with Nougat.
After a few days of testing everything works really good and i have not found anything not working or any problems.
Alex

bori321 said:
Hi,
before update to Oreo i flashed NPPS25.137-93-2-5 Firmware and after that the Image from this thread.
Worked perfect.
Alex
I tried to post a Screenshot but it was not possible because i am a new member...
Click to expand...
Click to collapse
how do you get back to NPPS25.137-93-2-5

I followed the steps from this Thread: https://forum.xda-developers.com/g5/development/stock-upgrade-to-official-stock-oreo-8-t3823598
- Unlocked bootloader (don't know of this is necessary)
- back to NPPS25.137-93-2-5 via the commands from the thread i linked (without the lines:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
)
- via ADB sideload with the Oreo download from this thread to Oreo.
Alex

ahmedAZ said:
how is speaker quality in this build ?
because there is some issues in previous oreo builds
Click to expand...
Click to collapse
In my experience the quality is better than on previous oreo builds.
ahmedAZ said:
how do you get back to NPPS25.137-93-2-5
Click to expand...
Click to collapse
if you have an unlocked bootloader download NPPS25.137-93-2-5 Flashable Zip here and flash it with twrp
bori321 said:
I followed the steps from this Thread: https://forum.xda-developers.com/g5/development/stock-upgrade-to-official-stock-oreo-8-t3823598
- Unlocked bootloader (don't know of this is necessary)
Alex
Click to expand...
Click to collapse
to flash official Motorola files there's no need to unlock the bootloader.
you've just unnecessarily voided your warranty

@freeZbies
Hey is that twrp stock rom (137-93-2-5) the only thing we need to flash before going for the ota ? Cause I've been told that we needed to be on a completely unmodified system partition in order to receive the ota. In that case just flashing twrp stock wouldn't be sufficient right?
https://forum.xda-developers.com/g5...o-official-stock-oreo-8-t3823598/post77713117

Chekm8Qc said:
@freeZbies
Hey is that twrp stock rom (137-93-2-5) the only thing we need to flash before going for the ota ? Cause I've been told that we needed to be on a completely unmodified system partition in order to receive the ota. In that case just flashing twrp stock wouldn't be sufficient right?
https://forum.xda-developers.com/g5...o-official-stock-oreo-8-t3823598/post77713117
Click to expand...
Click to collapse
I dont know if the twrp version would be valid. To apply an OTA, your system must matchbit by bit, so the most guaranteed way is to flash that firmware via fastboot, but you could try flashing the twrp version, and in case it works, you could post the results here.
just dont forget that if the ota fails youll soft brick ur phonr and will only be able to recover it via fastboot

freeZbies said:
I dont know if the twrp version would be valid. To apply an OTA, your system must match stick bit by bit, so the most guaranteed way is to flash that firmware via fastboot, but. you could try flashing the twrp version, and in case it. woeks you could post the results here.
just dont forget that if the ota fails youll soft brick ur phonr and will only be able to recover it via fastboot
Click to expand...
Click to collapse
Thanks I'll keep that in mind
Being soft bricked,, wouldn't I be able to use twrp still? Like to flash a valid rom or one of my backups?
Anyways I can't really try it that way since the update hasn't come to me yet I'm on software channel Retca.
Edit : right I forgot that I could just use the official ota available here if I would like to test it.

Chekm8Qc said:
Thanks I'll keep that in mind
Being soft bricked,, wouldn't I be able to use twrp still? Like to flash a valid rom or one of my backups?
Anyways I can't really try it that way since the update hasn't come to me yet I'm on software channel Retca.
Edit : right I forgot that I could just use the official ota available here if I would like to test it.
Click to expand...
Click to collapse
being soft bricked doesnt necessarily mean you can recover it through twrp. OTA's are different of twrp flashables in that it modifies things beyond system partition. I've seen reports from people with other motorola devices who applied an OTA while having a modified system partition, and even though they were able to boot to twrp, flashing a custom Rom or restore a backup wouldn't make the phone boot. Their phones weren't hard bricked, but still they had to fastboot to recover their phones. Anyways, why don't you flash the Twrp flashable if, it's already available (considering you have an unlocked bootloader).
I'm case you have a locked bootloader you may fastboot without executing "fastboot erase userdata" in case you want to try. I did it without losing my data (although I was already in Opp 28.85-16)
but after all I really advice you to flash the twrp zip if u can

Mi a2 dec update available

Mi a2 december update available
Weighs around 227 mb
I think that speaker bug will be solved

can confirm. received it as well. Hope some major issues are resolved here. It does not mention december update the in changelog.

Confirm! from thailand.

Dec update
I am trying to update through ota and it says installation problemcan anyone plz give me a solution for that.plz

After the update i can confirm that volume through the earphones definitely seems louder, similar to what it was in Oreo.

Recieved also on Pi9. Another garbage patch. No more than a blinking Android One screen resulting a non-booting phone. Piece of s..t!

Confirm from India. Really happy with the updates on this device.

can anyone put the boot.img file as i lost my root while updating due installation error at the first time of the update installation.

Brachogan said:
can anyone put the boot.img file as i lost my root while updating due installation error at the first time of the update installation.
Click to expand...
Click to collapse
You'll always find images here
https://androidfilehost.com/?w=files&flid=284999

OTA Installation Problem
I can't install the ota update it just shows this error and have to re download the file again to which shows the same error. I only have my phone unlocked and I don't root my phone.

wahyu915 said:
I can't install the ota update it just shows this error and have to re download the file again to which shows the same error. I only have my phone unlocked and I don't root my phone.
Click to expand...
Click to collapse
I have the same error
I'm on pie with November sec patch installed with fastboot commands and don't work

xiaomi is a joke...sad.

luisjoseb said:
I have the same error
I'm on pie with November sec patch installed with fastboot commands and don't work
Click to expand...
Click to collapse
maybe you are rooted ?

wahyu915 said:
I can't install the OTA update it just shows this error and has to re-download the file again to which shows the same error. I only have my phone unlocked and I don't root my phone.
View attachment 4665014
Click to expand...
Click to collapse
1: restart device first method
2: factory reset Second Method
every system update follows this method any issue occur issue was sorted.

AJ said:
maybe you are rooted ?
Click to expand...
Click to collapse
Thanks for your answer, I don't try to root, but I try to install gcam.
But I solved the problem flashing again with extracted payload files and now I'm on latest release.
Thanks

Just update here in Brazil

luisjoseb said:
Thanks for your answer, I don't try to root, but I try to install gcam.
But I solved the problem flashing again with extracted payload files and now I'm on latest release.
Thanks
Click to expand...
Click to collapse
Hey man,
Can you help me out how to do that because I'm also facing the same problem
Currently on pie with November 2nd security patch
I have system update installation fail.

Qyfaruxx said:
Hey man,
Can you help me out how to do that because I'm also facing the same problem
Currently on pie with November 2nd security patch
I have system update installation fail.
Click to expand...
Click to collapse
Yes, you need to follow the instrucctions in this post https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445
Bassicaly you need to download the OTA https://android.googleapis.com/pack.../0ec115a98a2d790e57b1ee60c217b5c0029ce091.zip, extract the zip and dump the payload.bin with payload_dumper
Then you need to flash the files with fastboot.
---------- Post added at 04:36 PM ---------- Previous post was at 03:43 PM ----------
Now Xiaomi's blog anounce the upgrade for all Mi A2 users tomorrow
https://c.mi.com/thread-1734573-1-0.html

Indian variant 4/64 . I haven't received any update yet. Tried a reset. Didn't work. No updates still. What is going wrong?