Database Users

How do I backup my IMEI?

I was told to backup my IMEI before fashing CM14.1. I looked at this guide and because I don't want to go through the hassle rooting my phone I decided to go with the twrp backup way because I was going to backup with twrp anyway. But when I go to backup it doesn't show the EFS partitition like in the guide. I have Boot, System, Data and Cache. Will I need to root my phone or is there an easy fix to this? Also my phone is a moto G4 and not a G4 plus but I thought I'd ask here because the non-plus forum is kinda dead.

Florensie said:
I was told to backup my IMEI before fashing CM14.1. I looked at this guide and because I don't want to go through the hassle rooting my phone I decided to go with the twrp backup way because I was going to backup with twrp anyway. But when I go to backup it doesn't show the EFS partitition like in the guide. I have Boot, System, Data and Cache. Will I need to root my phone or is there an easy fix to this? Also my phone is a moto G4 and not a G4 plus but I thought I'd ask here because the non-plus forum is kinda dead.
Click to expand...
Click to collapse
In my lg g3 i have this option in twrp, it was nice if we had also in our moto g4.But for now we do not have.
Sent from my Moto G4 using XDA Labs

1. Backup all available in twrp
2. Follow this for root -> http://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
3. Download Flashfire -> https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en_GB
4. Set selinux to permissive temporary:
Code:
su
setenforce permissive
5. Open Flashfire and select RAW partition backup.
(I would backup all, but for IMEI you only need modem partitions)

velosa said:
In my lg g3 i have this option in twrp, it was nice if we had also in our moto g4.But for now we do not have.
Sent from my Moto G4 using XDA Labs
Click to expand...
Click to collapse
So do I need to root my phone or is the IMEI stored in any of the other partitions TWRP backs up? Also, can't I just write down my number from the about tab in Android?
Sent from my Moto G (4) using XDA-Developers mobile app

gabriwinter said:
1. Backup all available in twrp
2. Follow this for root -> http://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
3. Download Flashfire -> https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en_GB
4. Set selinux to permissive temporary:
Code:
su
setenforce permissive
5. Open Flashfire and select RAW partition backup.
(I would backup all, but for IMEI you only need modem partitions)
Click to expand...
Click to collapse
Thanks I'll take a look at that.

gabriwinter said:
1. Backup all available in twrp
2. Follow this for root -> http://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
3. Download Flashfire -> https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en_GB
4. Set selinux to permissive temporary:
Code:
su
setenforce permissive
5. Open Flashfire and select RAW partition backup.
(I would backup all, but for IMEI you only need modem partitions)
Click to expand...
Click to collapse
EDIT: I restored my backup and it's fine now. But I sure did almost have a heart attack. I am on nougat soak test which was causing issues.
I did the second step but now my IMEI doesn't show up anymore, my SIM isn't found, I can't find any networks, my IP address is gone, my mac address is reset. Do I restore the backup?
tl;dr: topic in the second step barely points out the fact it only works on marshmellow (small, non bold, normal size letters at the top of the topic), flashed it anyway, almost lost my IMEI while trying to backup... my IMEI
EDIT 2: sorry for being such a noob, but wouldn't it be better to go straight to CM, root it with CM's built-in rooting functionality and then do the backup? Would there be a higher chance of losing an IMEI number in the process of that than in the process of your instructions because for your instructions I need to go back to marshmellow, root, backup IMEI, flash nougat (people say CM has less issues if you flash nougat first), flash CM? How do you even 'lose' your IMEI?

I'm sorry I didn't realise you where using nougat.
Yes flashing CM and then using flashfire will work just fine.
You will be taking a backup of the soak version of your modem partitions.
You won't loose your IMEI flashing CM because it doesn't change the modem partitions.
The only way you can loose your IMEI is by using fastboot (or flashfire) and flashing the wrong version.
So you don't need to worry about losing your IMEI at this stage.

gabriwinter said:
I'm sorry I didn't realise you where using nougat.
Yes flashing CM and then using flashfire will work just fine.
You will be taking a backup of the soak version of your modem partitions.
You won't loose your IMEI flashing CM because it doesn't change the modem partitions.
The only way you can loose your IMEI is by using fastboot (or flashfire) and flashing the wrong version.
So you don't need to worry about losing your IMEI at this stage.
Click to expand...
Click to collapse
No problem, you couldn't have possibly known that. I should have mentioned it. Thanks for the help yet again.
Sent from my Moto G (4) using XDA-Developers mobile app

I may be asking a stupid question but how do you "lose" your imei? Isn't that the serial number to the device. I mean it's stamped on the back of the battery. I wouldn't think that is possible, isn't that how your phone gets blacklisted?

daverobinson88 said:
I may be asking a stupid question but how do you "lose" your imei? Isn't that the serial number to the device. I mean it's stamped on the back of the battery. I wouldn't think that is possible, isn't that how your phone gets blacklisted?
Click to expand...
Click to collapse
The phone cannot read what's stamped on the back of the battery. It needs something to tell it that the IMEI number is so-and-so. The IMEI number thus is stored in a particular partition of your phone, one that is usually never touched by the average user.

Baseband unknown

My nexus 6p is not showing IMEI and also showing unknown for Baseband version. I have no efs backup. Tried reflashing stock firmware, erasing modemst1, modemst2, modem, fsg, custom rom (RR), and tried them in different combinations. Yet it still shown baseband unknown. :crying:
Is there any way I can get modemst1 and modemst2? Please suggest a solution to fix this. Warranty over a week before this happened. And it happened out of nowhere. :crying:

Baseband is the radio, isn't it? You can get the latest image from here:
http://forum.xda-developers.com/nexus-6p/general/nmf26f-official-7-1-1-radio-vendor-t3513430
---------- Post added at 10:53 AM ---------- Previous post was at 10:50 AM ----------
You might want to do a complete install of the latest system image if flashing the radio doesn't solve your problem:
https://developers.google.com/android/images
---------- Post added at 10:58 AM ---------- Previous post was at 10:53 AM ----------
I'm not sure that either of these will restore your IMEI, however. Do you have a CDMA or GSM phone?

jhs39 said:
Baseband is the radio, isn't it? You can get the latest image from here:
http://forum.xda-developers.com/nexus-6p/general/nmf26f-official-7-1-1-radio-vendor-t3513430
---------- Post added at 10:53 AM ---------- Previous post was at 10:50 AM ----------
You might want to do a complete install of the latest system image if flashing the radio doesn't solve your problem:
https://developers.google.com/android/images
---------- Post added at 10:58 AM ---------- Previous post was at 10:53 AM ----------
I'm not sure that either of these will restore your IMEI, however. Do you have a CDMA or GSM phone?
Click to expand...
Click to collapse
Thanks for the reply. I tried both of em. Is there any way i can get fsg, modemst1, modemst2 files? Im thinking of finding another Nexus 6P and copying its files and somehow editing the IMEI information using some HEX editor and then uploading to my phone.
If it is alright then can you or someone send me their modemst1, modemst2 and fsg files after editing their IMEI no. ?
This site provide how to edit your IMEI: androidbrick (Change it to something like 876543210123456)
Btw my phone is LTE/GSM

I think if you can get a hold of someone's EFS backup and restore it on your phone it would restore your missing IMEI number. The problem is finding someone who is willing to provide you with a copy of their EFS backup.

I was able to get the IMEI number for my Nexus 6P from Google Dashboard:
http://www.google.com/settings/dashboard
Once you know your IMEI you may be able to restore it with an app like IMEI Tweak.

jhs39 said:
I think if you can get a hold of someone's EFS backup and restore it on your phone it would restore your missing IMEI number. The problem is finding someone who is willing to provide you with a copy of their EFS backup.
Click to expand...
Click to collapse
Yes. I'm trying to find someone who can provide me with modem files.

jhs39 said:
I was able to get the IMEI number for my Nexus 6P from Google Dashboard:
http://www.google.com/settings/dashboard
Once you know your IMEI you may be able to restore it with an app like IMEI Tweak.
Click to expand...
Click to collapse
I have the box which has the IMEI. I tried some apps like IMEI Tweaks. Even tried some apps through XPOSED framework. Nothing worked. Hope someone gives me the modem files.

pronuba66 said:
My nexus 6p is not showing IMEI and also showing unknown for Baseband version. I have no efs backup. Tried reflashing stock firmware, erasing modemst1, modemst2, modem, fsg, custom rom (RR), and tried them in different combinations. Yet it still shown baseband unknown. :crying:
Is there any way I can get modemst1 and modemst2? Please suggest a solution to fix this. Warranty over a week before this happened. And it happened out of nowhere. :crying:
Click to expand...
Click to collapse
How did you erase modemst1 & modemst2? From an ADB shell like this? I can't find it to save my life, but I did read if the EFS partitions are formatted properly they will rebuild from firmware on first boot. You stated phone is out of warranty, but did you actually get denied when you called Huawei? There may be an unadvertised warranty/RMA for your phone's current state, or they may be able to suggest a fix.

v12xke said:
How did you erase modemst1 & modemst2? From an ADB shell like this? I can't find it to save my life, but I did read if the EFS partitions are formatted properly they will rebuild from firmware on first boot. You stated phone is out of warranty, but did you actually get denied when you called Huawei? There may be an unadvertised warranty/RMA for your phone's current state, or they may be able to suggest a fix.
Click to expand...
Click to collapse
I erased using dd command as stated in your link provided. But even after several reboots, and several uploads of different ROMS, it still is zero (Both modemst1 and modemst2).
My phone was bought from a different country, and hence warranty was not accepted in my country. Even the people at the Huawei service center was not very helpful.
I'm actually waiting for my friend to root his phone(unlocking required which will erase the user data) so that I can get the modem files. If fixed I'll message you.

pronuba66 said:
I erased using dd command as stated in your link provided. But even after several reboots, and several uploads of different ROMS, it still is zero (Both modemst1 and modemst2).
My phone was bought from a different country, and hence warranty was not accepted in my country. Even the people at the Huawei service center was not very helpful.
I'm actually waiting for my friend to root his phone(unlocking required which will erase the user data) so that I can get the modem files. If fixed I'll message you.
Click to expand...
Click to collapse
Good luck.
---------- Post added at 09:17 PM ---------- Previous post was at 09:12 PM ----------
jhs39 said:
Good luck.
Click to expand...
Click to collapse
From what I've read if your friend makes an EFS backup you can use that to restore yours. If the modem restore doesn't work you might want to try that,

pronuba66 said:
I erased using dd command as stated in your link provided. But even after several reboots, and several uploads of different ROMS, it still is zero (Both modemst1 and modemst2).
My phone was bought from a different country, and hence warranty was not accepted in my country. Even the people at the Huawei service center was not very helpful.
I'm actually waiting for my friend to root his phone(unlocking required which will erase the user data) so that I can get the modem files. If fixed I'll message you.
Click to expand...
Click to collapse
Any solution for this? I also have imei unknown, baseband unknown issue. I don't have an efs backup either. Also flashed stock rom, but it didn't help. Any suggestions would be really appreciated.

chathura2020 said:
Any solution for this? I also have imei unknown, baseband unknown issue. I don't have an efs backup either. Also flashed stock rom, but it didn't help. Any suggestions would be really appreciated.
Click to expand...
Click to collapse
Hi,
You can try this:
Find someone having the same firmware. Root his phone and download all the partitions from his phone (from "/dev/block/platform/soc.0/f9824900.sdhci/by-name" using dd command or adb pull (in root mode). To change the IMEI from his to yours, use a hex editor and edit the IMEI in one of the partitions (I think it was in modemst1 or modem or devinfo partition).
I have tried this but my mobile was bought from UAE and Indian firmware did not work. But that fixed some restart issue, heating problem and the phone was more stable which implied the problem was definitely some corrupted partitions.
If you get it fixed please do tell me. Good luck.
Please do keep backup of your partitions

pronuba66 said:
Hi,
You can try this:
Find someone having the same firmware. Root his phone and download all the partitions from his phone (from "/dev/block/platform/soc.0/f9824900.sdhci/by-name" using dd command or adb pull (in root mode). To change the IMEI from his to yours, use a hex editor and edit the IMEI in one of the partitions (I think it was in modemst1 or modem or devinfo partition).
I have tried this but my mobile was bought from UAE and Indian firmware did not work. But that fixed some restart issue, heating problem and the phone was more stable which implied the problem was definitely some corrupted partitions.
If you get it fixed please do tell me. Good luck.
Please do keep backup of your partitions
Click to expand...
Click to collapse
My phone is going through exact same problem. My device was stuck in bootloop I got it fixed from a market place and my device would not show any carrier signals or my imei. How can I get modem files or what is a fix to it? Please help.

hkingpro said:
My phone is going through exact same problem. My device was stuck in bootloop I got it fixed from a market place and my device would not show any carrier signals or my imei. How can I get modem files or what is a fix to it? Please help.
Click to expand...
Click to collapse
In theory the Nexus 6P should rebuild the EFS Partitions if you overwrite them with zeros.
I used the following to fix my 6P back when TWRP v3.0.2-1 had a bug that restored the EFS1 partition to both EFS slots, causing the phone to not boot.
Try this:
Boot your Nexus 6P into TWRP;
Plug the phone into a PC that has ADB tools installed;
Then on PC, open Command Prompt with access to ADB and execute the following commands:
ADB shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst1 bs=16384
and
ADB shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst2 bs=16384
Let me know if this works for you.

defcondev said:
In theory the Nexus 6P should rebuild the EFS Partitions if you overwrite them with zeros.
I used the following to fix my 6P back when TWRP v3.0.2-1 had a bug that restored the EFS1 partition to both EFS slots, causing the phone to not boot.
Try this:
Boot your Nexus 6P into TWRP;
Plug the phone into a PC that has ADB tools installed;
Then on PC, open Command Prompt with access to ADB and execute the following commands:
ADB shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst1 bs=16384
and
ADB shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst2 bs=16384
Let me know if this works for you.
Click to expand...
Click to collapse
THANK YOU SO MUCH FOR YOUR REPLY. I tried this but it did not work for me brother. I have been searching day and night for this but not getting any solution for this. I was browsing Xda the other day and found a thread https://forum.xda-developers.com/nexus-6p/help/lost-imei-sim-error-t3282545 in comments section Tyson568 has shared a link which I think might be EFS modem files? Do you think that can help? If that can how can I flash them?

hkingpro said:
THANK YOU SO MUCH FOR YOUR REPLY. I tried this but it did not work for me brother. I have been searching day and night for this but not getting any solution for this. I was browsing Xda the other day and found a thread https://forum.xda-developers.com/nexus-6p/help/lost-imei-sim-error-t3282545 in comments section Tyson568 has shared a link which I think might be EFS modem files? Do you think that can help? If that can how can I flash them?
Click to expand...
Click to collapse
Have you tried flashing a factory image to your 6P?
If not, I would backup all of your data to a computer and flash a stock factory image to your 6P and see if this resolves the issue.
You can find the images and instructions at the link below under the section titled "angler for Nexus 6P"
Make sure to NOT re-lock the bootloader at this point (just skip that step in the flashing instructions).
Keep in mind, this will remove TWRP from your 6P and revert back to the stock Recovery - keep the stock recovery and boot the 6P fully to see if the issue is resolved. If your IMEI returns, you can then flash TWRP and backup your EFS partitions.
https://developers.google.com/android/images

defcondev said:
Have you tried flashing a factory image to your 6P?
If not, I would backup all of your data to a computer and flash a stock factory image to your 6P and see if this resolves the issue.
You can find the images and instructions at the link below under the section titled "angler for Nexus 6P"
Make sure to NOT re-lock the bootloader at this point (just skip that step in the flashing instructions).
Keep in mind, this will remove TWRP from your 6P and revert back to the stock Recovery - keep the stock recovery and boot the 6P fully to see if the issue is resolved. If your IMEI returns, you can then flash TWRP and backup your EFS partitions.
https://developers.google.com/android/images
Click to expand...
Click to collapse
I tried multiple Images but none of them worked. My phone was bootlooping again and again and then finally I followed this thread. I flashed 8.0 factory image and flashed rest of images suggested by this thread and my phone booted up. I don't know what to do here.

hkingpro said:
I tried multiple Images but none of them worked. My phone was bootlooping again and again and then finally I followed this thread. I flashed 8.0 factory image and flashed rest of images suggested by this thread and my phone booted up. I don't know what to do here.
Click to expand...
Click to collapse
I had same issue on my OnePlus X. I kept backing up and restoring EFS partion everytime I needed a restore which now know not suppose to do. Unknown baseband and no imei. Anyways the way I fixed it was simply booting into bootloader mode, fastboot command window type
"fastboot erase modemst1 "
"fastboot erase modemst2 "
I never tested on my Nexus 6p so use at own risk.

I9505 "no service" on custom rom

Hello,
there is something weird going on: If I flash a custom rom (cm13, cm14.1/Lineage14.1) the 9505 shows the "no service" notification and network service is actually not available. Wifi just works fine. I ve read about problems with the baseband and some IMEI problems but both seems to be ok.
What I habe done in overview:
Rooted the phone with Heimdall and CF Root by chainfire
installed TWRP via app
full backup of original firmware
full wipe
flash custom rom (CM13/CM14)
"no service"
If i wipe and restore the original firmware again, mobile network is just working fine!!!
So, what could be the problem? I was wondering if its a hardware problem but as described with samsung os it works. So please help me!
Thanks and best regards,
hibbert

Is the phone running the latest bootloader and modem?

Try flashing the Optimized Lineage ROMs, 13 or 14 doesn't matter.. Those are unified, so chances are that it will work on many Snapdragon S4 models.

audit13 said:
Is the phone running the latest bootloader and modem?
Click to expand...
Click to collapse
Bootloader and Baseband are: I9505XXUHOJ2
Where can I find an overview about the newest Bootloaders and Modems?
Br
Hibbert

You can compare the bootloader and modem to ROMs found at sammobile.com. The phone looks like it is up to date so I'm not sure why it is not connecting to your carrier.

Try using the IMEI Backup/restore tool by Antaresone:
https://forum.xda-developers.com/showthread.php?t=2975136
Start with a working firmware making sure you have installed the tool as directed in the above thread.
Using a terminal emulator type SU and grant root access.
Type imeibkp and hit enter. Allow it to create a backup.
Flash ROM of choice, Gapps, and the IMEI Backup.
Boot ROM and using WiFi reinstall a terminal emulator.
Run the IMEI backup/restore tool and restore your IMEI backup.
Reboot.
This method has worked for me in the past. Hope it helps.

Until now i cant fix the problem. The imeibkp solution did not work. Any other ideas?
Best regards
Hibbert
FernBch said:
Try using the IMEI Backup/restore tool by Antaresone:
https://forum.xda-developers.com/showthread.php?t=2975136
Start with a working firmware making sure you have installed the tool as directed in the above thread.
Using a terminal emulator type SU and grant root access.
Type imeibkp and hit enter. Allow it to create a backup.
Flash ROM of choice, Gapps, and the IMEI Backup.
Boot ROM and using WiFi reinstall a terminal emulator.
Run the IMEI backup/restore tool and restore your IMEI backup.
Reboot.
This method has worked for me in the past. Hope it helps.
Click to expand...
Click to collapse

my p10 lite bricked [unbrick how-to]

<how-to unbrick>(TRY THIS AT YOUR OWN RISK)
this method is useful for was-lx2j,and "can boot stock rom" but "Almost apps not found".
1 )back to your stock recovery using
Code:
fastboot flash recovery RECOVERY.ing
2 )In huawei firmware finder,open the proxy server
3 )follow the proxy server's instraction
(POINT:USE THE LINK TO YOUR LAST STOCK FIRMWARE'S FULLOTA CHANGELOG)
exemple:my stock firmware's version before flashing custom rom and bricking is WAS-LX2JC635B175,so I choose it
Code:
Instructions.
1. Enter a link to the changelog of firmware in the "Firmware for install" field and click "Set".
2. Click the button "Register for update". Registration takes place by IP address.
3. After registration, you need to change your DNS address to 81.177.139.39. Dont forget save your original dns settings for restore it later. (You can change it in network settings, router settings or setup like proxy without port in hisuite).
4. Go to Huawei Updater in phone or go to HiSuite and press check update. After that you should get update.
5. After install dont forget to reset the dns settings to the original state.
4 )reboot your p10lite to huawei erecovery (or boot system)
5 )press "download ~"and update your system(or do a system update)
6 )go to stock recovery and do a factory reset
7 )DONE! reboot to system and phone will successfully booting!!!!!!
any questions,reply to this therd or PM me
<oliginal OP:↓>
edit:MY PHONE WAS FULLY UNBRICKED!!!
THX FOR ALL ADVICE!!!
my p10 lite (WAS-LX2J) was bricked...
1)I flashed a lineage unofficial build.
2)I flashed vendor as dd command from twrp shell.
3)I tested the rom
4)I wanted to back to stock rom,so I flashed system.img,cust.img,boot.img from stock firmware using huawei update extractor and fastboot.
5)I wanted to flash vendor but fastboot says command not allowed.
6)reboot to twrp and flash stock vendor as dd,but it fails(partition broken)
now,my p10 lite bricked...
Anyone has solution or twrp backup(system,cust,vendor,boot)???
any answer is welcome....
sorry for my bad english

Can you still get into TWRP? If you go into wipe, advanced, if you select something there you have the option to fix or repair that file system. I would be guessing if I knew what you needed to select though. Any risk is down to you.
Maybe that will fix your error? I have to sometimes do this to the 'data' file system to be able to boot lineageOS.
If you do manage to restore stock filmware successfully please share your steps on the p10 lite forum.

stonedpsycho said:
Can you still get into TWRP? If you go into wipe, advanced, if you select something there you have the option to fix or repair that file system. I would be guessing if I knew what you needed to select though. Any risk is down to you.
Maybe that will fix your error? I have to sometimes do this to the 'data' file system to be able to boot lineageOS.
If you do manage to restore stock filmware successfully please share your steps on the p10 lite forum.
Click to expand...
Click to collapse
yes,I can get into twrp so I repaired filesystem.
I fixed filesystem:vendor and system.
I wiped all data
still bricked

Find out from the OP on this thread if there is a Service firmware for your device. Hopefully you'll be able to fix your device with a service firmware.

miz_pimp said:
Find out from the OP on this thread if there is a Service firmware for your device. Hopefully you'll be able to fix your device with a service firmware.
Click to expand...
Click to collapse
Yes I already saw it but my phone was not found…
but my phone unbricked by another method!!!
thx for your advice
sorry for my bad english

hayabusa2yk said:
Yes I already saw it but my phone was not found…
but my phone unbricked by another method!!!
thx for your advice
sorry for my bad english
Click to expand...
Click to collapse
You have c635 or c719?
I have backups was-lx2jc635b174 hw/jp. Without data and system.

rambik33 said:
You have c635 or c719?
I have backups was-lx2jc635b174 hw/jp. Without data and system.
Click to expand...
Click to collapse
yes,and firmware is same!
thx very much!
I unbricked my phone,but sadly my phone's frp unlocked…
so i'm happy if you send backup!
sorry for my bad english

hayabusa2yk said:
yes,and firmware is same!
thx very much!
I unbricked my phone,but sadly my phone's frp unlocked…
so i'm happy if you send backup!
sorry for my bad english
Click to expand...
Click to collapse
https://yadi.sk/d/8bBC7la-3Pwv8T

rambik33 said:
https://yadi.sk/d/8bBC7la-3Pwv8T
Click to expand...
Click to collapse
thx very much!!!

Hey, I have the same phone and problem (I tried to installl a lineageos). I want to go back to stock rom.
Where can I get the files for this, thanks! (stock recovery, imgs, firmware etc)

mount_E said:
Hey, I have the same phone and problem (I tried to installl a lineageos). I want to go back to stock rom.
Where can I get the files for this, thanks! (stock recovery, imgs, firmware etc)
Click to expand...
Click to collapse
you can download it with huawei firmware finder!
here:xda
If you want help,contact me at PM so I'll help you...

Sim cards getting detected but showing "No Service"

I recently Flashed stock rom NPJS25.93-14-18 , After flashing i got an update off ~40mb,Once the update was complete Both the sims were getting detected but were showing no Service.
Also my baseband was changed. is there any way i can revert back to the indian baseband ?
Device : XT1643
Bootloader status : unlocked
Recovery : Stock.
Thanks in advance

Moto g4 plus XT1643
anon10041998 said:
I recently Flashed stock rom NPJS25.93-14-18 , After flashing i got an update off ~40mb,Once the update was complete Both the sims were getting detected but were showing no Service.
Also my baseband was changed. is there any way i can revert back to the indian baseband ?
Device : XT1643
Bootloader status : unlocked
Recovery : Stock.
Thanks in advance
Click to expand...
Click to collapse
Just flash the stock rom with below link. this is the latest update of Moto G4 plus. and confirm worked or not.
Link - https://androidfilehost.com/?fid=890278863836286757

Abijith Ajayan said:
Just flash the stock rom with below link. this is the latest update of Moto G4 plus. and confirm worked or not.
Thats the rom which i flashed,yet no success
want to know if there's any way to flash the indian baseband
Click to expand...
Click to collapse

Moto g4 plus XT1643 Baseband Issue
anon10041998 said:
Abijith Ajayan said:
Just flash the stock rom with below link. this is the latest update of Moto G4 plus. and confirm worked or not.
Thats the rom which i flashed,yet no success
want to know if there's any way to flash the indian baseband
Click to expand...
Click to collapse
Tell me which baseband is showing now..????
Click to expand...
Click to collapse

Abijith Ajayan said:
anon10041998 said:
Tell me which baseband is showing now..????
Click to expand...
Click to collapse
The Band Is "M8952_70030.25.03.62.02R DFLT_FSG"
Thanks in advance
Click to expand...
Click to collapse

Moto g4 plus XT1643 Baseband Issue
anon10041998 said:
Abijith Ajayan said:
The Band Is "M8952_70030.25.03.62.02R DFLT_FSG"
Thanks in advance
Click to expand...
Click to collapse
I guess... This same issue i faced already....
So next step u have to push ur Modem.img, fsg.img && hw.img.
Previously am facing this issue, that time @echo92 help me for fix this.
After that u have to flash with same stock rom what i send u the link in previous post.
Steps u should follow :
1. First You download the files from here - https://drive.google.com/drive/folders/1vQHJB37RV4Iv83jeO5mymw-UNe9KtRNm
2. copy the files to your adb or miniboot folder.
3.Open CMD and boor ur phone into TWRP and check once ur device is ready with fastboot devices command
4.Execute the Following commands
Code:
adb push modem.img /dev/block/mmcblk0p1
adb push fsg.img /dev/block/mmcblk0p16
adb push hw.img /dev/block/mmcblk0p43
5.Go to ur bootloader again. with fastboot. and flash with that same latest stock rom and check. ur baseband once.
6. i think this baseband will come as EMEA_CUST. But it will get signal network.
Click to expand...
Click to collapse

Abijith Ajayan said:
anon10041998 said:
I guess... This same issue i faced already....
So next step u have to push ur Modem.img, fsg.img && hw.img.
Previously am facing this issue, that time @echo92 help me for fix this.
After that u have to flash with same stock rom what i send u the link in previous post.
Steps u should follow :
1. First You download the files from here - https://drive.google.com/drive/folders/1vQHJB37RV4Iv83jeO5mymw-UNe9KtRNm
2. copy the files to your adb or miniboot folder.
3.Open CMD and boor ur phone into TWRP and check once ur device is ready with fastboot devices command
4.Execute the Following commands
Code:
adb push modem.img /dev/block/mmcblk0p1
adb push fsg.img /dev/block/mmcblk0p16
adb push hw.img /dev/block/mmcblk0p43
5.Go to ur bootloader again. with fastboot. and flash with that same latest stock rom and check. ur baseband once.
6. i think this baseband will come as EMEA_CUST. But it will get signal network.
Click to expand...
Click to collapse
Problem solved.
Got only first sim working along with Volte.
Huge Thanks to You Sir @Abijith Ajayan
Click to expand...
Click to collapse

have this for moto g4 xt1626 ou how fix hw partition? I think that not have same initial tag.

Moto g4 plus XT1643 Sim slot2 Issue
anon10041998 said:
Abijith Ajayan said:
Problem solved.
Got only first sim working along with Volte.
Huge Thanks to You Sir @Abijith Ajayan
Click to expand...
Click to collapse
For second sim slot u just follow this steps also.
1. Download this files form here - https://cloud.mail.ru/public/2Xrm/3vbzbxX5U
2. Unzip the file. Password - lenovo-forums.ru
3. Copy the entire files to your adb folder
4. plesae confirm ur previous copied files should be delete from that adb folder. [For Flashing Purpose] , After delete that previous copy and
copy this files to that adb folder.
5. Put ur device into bootloader mode.
6. After that just run the programutags.
7. after that select region for INDIA.
8. It will work.. Enjoy.....:laugh::laugh:
Click to expand...
Click to collapse

Moto g4 plus XT1643 Sim slot2 Issue
anon10041998 said:
Abijith Ajayan said:
Problem solved.
Got only first sim working along with Volte.
Huge Thanks to You Sir @Abijith Ajayan
Click to expand...
Click to collapse
Second sim problem solved...?????????
Click to expand...
Click to collapse

Abijith Ajayan said:
anon10041998 said:
Second sim problem solved...?????????
Click to expand...
Click to collapse
Yes the problem is completely solved!!
Thankyou so much @abhijit Ajayan
Click to expand...
Click to collapse

Abijith Ajayan said:
anon10041998 said:
Second sim problem solved...?????????
Click to expand...
Click to collapse
my jio sim(VoLte) is not working any solution ?
i call use the data but cannot place a call from my jio sim
Click to expand...
Click to collapse

Moto G plus
anon10041998 said:
Abijith Ajayan said:
my jio sim(VoLte) is not working any solution ?
i call use the data but cannot place a call from my jio sim
Click to expand...
Click to collapse
Send me screenshot Pls
Click to expand...
Click to collapse

screenshot of my 4g settings and baseband

Moto g4 Plus Jio Volte Issue
anon10041998 said:
screenshot of my 4g settings and baseband
Hi, Previously after flash, for me also face the same issue. If u have any back up of your old. Just flash that backup with TWRP Recovery. Problem will solve 100%. Previously in Twrp recovery i took one simple backup. If u have that backup. just use that backup with TWRP.
Click to expand...
Click to collapse

Abijith Ajayan said:
anon10041998 said:
screenshot of my 4g settings and baseband
Hi, Previously after flash, for me also face the same issue. If u have any back up of your old. Just flash that backup with TWRP Recovery. Problem will solve 100%. Previously in Twrp recovery i took one simple backup. If u have that backup. just use that backup with TWRP.
Click to expand...
Click to collapse
I Actually Don't have any old backup with me sir!:crying:
It would be very kind of you if you provide me a google drive link of ur TWRP backup
Thanks in Advance
Click to expand...
Click to collapse

Can anybody please provide me the Stock hw.img and modem file for xt1643(indian)

cannot push hw partition
joaopaulo_ said:
have this for moto g4 xt1626 ou how fix hw partition? I think that not have same initial tag.
Click to expand...
Click to collapse
When 1 pish hw partition.it got struck after 100%. When i remove usb hw partition not complete errer occurs

I get this message adb: error: target 'mmcblk0p1' is not a directory and also nothing appears when I run the fastboot devices command with TWRP, could you help me?
I have an XT1640

Abijith Ajayan said:
anon10041998 said:
I guess... This same issue i faced already....
So next step u have to push ur Modem.img, fsg.img && hw.img.
Previously am facing this issue, that time @echo92 help me for fix this.
After that u have to flash with same stock rom what i send u the link in previous post.
Steps u should follow :
1. First You download the files from here - https://drive.google.com/drive/folders/1vQHJB37RV4Iv83jeO5mymw-UNe9KtRNm
2. copy the files to your adb or miniboot folder.
3.Open CMD and boor ur phone into TWRP and check once ur device is ready with fastboot devices command
4.Execute the Following commands
Code:
adb push modem.img /dev/block/mmcblk0p1
adb push fsg.img /dev/block/mmcblk0p16
adb push hw.img /dev/block/mmcblk0p43
5.Go to ur bootloader again. with fastboot. and flash with that same latest stock rom and check. ur baseband once.
6. i think this baseband will come as EMEA_CUST. But it will get signal network.
Click to expand...
Click to collapse
I am confused with the step 4 , can you help me on that .
In twrp adb is not detecting , i used adb side load and wen i entered the below command
adb push modem.img /dev/block/mmcblk0p1
it throws error ,
Error: closed
when i entered the command in adb(not in recovery) i get the error as "permission denied "
Did the above steps in StockROm downloaded from post #1
 @Abijith Ajayan @anon10041998 help us on the correct process
Click to expand...
Click to collapse