Hi all,
I'm currently using the PAC rom on my Nexus 4 and loving. One thing I was wondering though...
I was looking to enable boot audio so that I could have something play alongside a custom boot screen that I have created.
I have tried BAC and installed the MP3 binaries and done it that way but that doesn't seem to work for some reason as it doesn't play during boot, and no the device is not muted.
I have searched through Google but I don't seem to have found any solutions... does anybody know of any way to enable this?
Thank you.
Hello,
I recently rooted my sgs4 gt-i9505 to the goolge edition using a YoTube tutorial on how to do so. Everything worked fine at the start but when I tried to install the PAC man rom, it jus stayed in the loading screen.
I restarted and tried rebooting but to no avail. I went back into the recovery mode and wiped the phone (divlac, cashes and system) then I reinstalled the google rom to find my wifi was not working. I tried the same process again, wipe- reinstall. Now I can't receive calls, the wifi doesn't work, home button only works on double tap, pull down status bar works but nothing in displayed.
My question is, does anyone have any ideas on how I would return my device to normal or know a full proof recovery and rom I can use that will correct these problems.
I am in the UK if that makes any difference.
Thanks for all and any help.
Matt
Matt.graham said:
Hello,
I recently rooted my sgs4 gt-i9505 to the goolge edition using a YoTube tutorial on how to do so. Everything worked fine at the start but when I tried to install the PAC man rom, it jus stayed in the loading screen.
I restarted and tried rebooting but to no avail. I went back into the recovery mode and wiped the phone (divlac, cashes and system) then I reinstalled the google rom to find my wifi was not working. I tried the same process again, wipe- reinstall. Now I can't receive calls, the wifi doesn't work, home button only works on double tap, pull down status bar works but nothing in displayed.
My question is, does anyone have any ideas on how I would return my device to normal or know a full proof recovery and rom I can use that will correct these problems.
I am in the UK if that makes any difference.
Thanks for all and any help.
Matt
Click to expand...
Click to collapse
You could try to go back to stock and check if everything still works there.
Did you flash the correct modem/baseband for the ROM / your carrier? There is a thread in general for all the modems. Chances are with a KitKat ROM you need to update your modem. Read that thread and give it a go. The file is about 15mb and takes a minute to flash in Odin. Failing that go back to stock.
Nothing in status bar: that's what it looks like in stock, you can use 2 fingers for the quick settins. Installl WANAM XPOSED fromwork for more tweaks and options!!
Home button double tap: that's the way it works on the google edition, that's just it. BUT wanam xposed can change this with the Gravity Box module!! You could try the Echoe 2.2 kitkat rom it has xposed pre-installed.
Keep in mind things look blanker and less functional as you no longer have samsung touchwiz which adds a LOT of stuff to the stock experience!
One more thing: ALWAYS make a nandroid backup before flashing ANYTHING at all, you never know when you will need it. Backup the nandroid to your PC also just in case, things go missing/ get deleted! T
Hi to everyone, I have a BLU Studio 5.0 c HD (not rooted) which has been acting strangely for the last two days. The last app I installed was IFTTT app, everything seemed to be fine until some apps crashed and so I rebooted my phone, but now my phone wont get past the BLU logo screen. I entered into recovery mode and reset my phone to factory settings but with no luck.
What I would like to know is, is it possible to fix my phone if I don´t have root access? And how would I go about doing that?
And if I need to flash my phone, how do I do that if I cant get into the system?
All help will be greatly appreciated.
Thank you
Istan86 said:
Hi to everyone, I have a BLU Studio 5.0 c HD (not rooted) which has been acting strangely for the last two days. The last app I installed was IFTTT app, everything seemed to be fine until some apps crashed and so I rebooted my phone, but now my phone wont get past the BLU logo screen. I entered into recovery mode and reset my phone to factory settings but with no luck.
What I would like to know is, is it possible to fix my phone if I don´t have root access? And how would I go about doing that?
And if I need to flash my phone, how do I do that if I cant get into the system?
All help will be greatly appreciated.
Thank you
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try asking here:
Studio 5 Q&A, Help & Troubleshooting
The users who got the device may know how to solve this.
Good luck!
nilac said:
Hi and thank you for using XDA Assist
Try asking here:
Studio 5 Q&A, Help & Troubleshooting
The users who got the device may know how to solve this.
Good luck!
Click to expand...
Click to collapse
Hi Nilac, and thanks for your reply.
As I am a new member I can not create a new thread.
Any help will be greatly appreciated.
Istan86 said:
Hi Nilac, and thanks for your reply.
As I am a new member I can not create a new thread.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
Thread will be moved soon in that section.
Regards
I'm having a similar problem
Do I need need to start my own thread?
Hi,
I'm having a similar problem with my phone. It displays the BLU - BOLD Like Us startup screen (white with black font) and then after a few long seconds it just stops on a mostly black (faint light) screen.
I've tried recovery mode. Deleting cache and then Reset etc. with no luck. Removed SIM and SD Card etc.
Anyone else have this issue and been able to work past it by chance?
Appreciate any help on this, thanks!
Same here!
Natetronn said:
Do I need need to start my own thread?
Hi,
I'm having a similar problem with my phone. It displays the BLU - BOLD Like Us startup screen (white with black font) and then after a few long seconds it just stops on a mostly black (faint light) screen.
I've tried recovery mode. Deleting cache and then Reset etc. with no luck. Removed SIM and SD Card etc.
Anyone else have this issue and been able to work past it by chance?
Appreciate any help on this, thanks!
Click to expand...
Click to collapse
Exactly the same with my 5.0 LTE. I managed to install a firmware with QFIL.
Everything was perfect, and after 2 weeks...back to the app crashing and finally endless loop of the Blu Logo!
Anyone had found a real solution or what is causing the problem?
Same here!
cbasrud said:
Exactly the same with my 5.0 LTE. I managed to install a firmware with QFIL.
Everything was perfect, and after 2 weeks...back to the app crashing and finally endless loop of the Blu Logo!
Anyone had found a real solution or what is causing the problem?
Click to expand...
Click to collapse
I have a NON ROOTED Studio 5 LTE, Using Qfill I´m always manage to have the phone up and working flawless, but after a couple of weeks it start messing around until it finally sticks on the Boot Logo.
I´ve tried without the SD card, with the SD Card, with the SD Card formatted, with and without the SIM card and it always ends with the same problem. I´ve called BLU, but no proper solution was given....
Anyone did find the solution??
hi guys, i have a studio 5.0 c hd, i have change the OS like a 5 times, im testing a new ROM, my problem is the same, when i reset the phone, the OS crash and stay in the logo screem forever, i have used the sptools and i have used the drivers... all this download from diferent pages... if anyone knows a solution for this problem pls reply here... if anyone want the list of programs i can give u
Use flash tool and flash system image in android menu flash tool and flash
HY, So as you can see on the screens, I cant see anything on my messenger. Lite version works, but the lack of dark mode irritates me. Things I tried:
- My phone is ROOTED, tried to hide it from Magisk
- Tried the basic delet cache/data/reinstall
- Tried installing older version, you cant go back too far tho, I doesnt let you log in
After install, first boot says check my internet connection, tried both with 4G and Wi-Fi
Second boot it just bugs out
Any idea?
Cheers
I have a T3 Mini-A S905 series SOC P281 with a Stectek MLC NAND Flash. The firmware is 20181210. The box keeps freezing and I have tried loading and changing various img file using Ricky's Android Customization tool V 7.1.0 and the Android USB Burning tool V 2.1.7.3.
I have tried the APTXperience img with no success. It boot fine but still freezes. I have tried everything I can think of. Anyway all this and nothing seems to help the freezing problem.
Now I am thinking of removing all the APK's that are not necessary and see if this helps. I have done many searches on what APKS are required to get the box up and working, with no success.I have tried removing the ones I throught may not be needed but the box wiil only stays at the android cycling screen, the one displayed before the android screen comes up.
Does anyone know what APKS are required in order to boot up the box. Any help on this would be great. Thanks.