Hi all,
I was trying to install ROM for my Z17 mini, but it was a mistake that I downloaded the Z11 ROM, and install it in TWRP recovery. After rebooting, I cannot enter Bootloader through Vol- + Power. When I connect my Z17 Mini to charger or plug it into my PC, the Home button blinks red. Now I cannot turn it off, the screen is black, but when I try to plug into PC, it notifies that the phone is connected, but when I go to Device Manager, it shows errors as if there is no properly driver for the phone.
Can my phone be rescued? Please help me
bountyhunter said:
Hi all,
I was trying to install ROM for my Z17 mini, but it was a mistake that I downloaded the Z11 ROM, and install it in TWRP recovery. After rebooting, I cannot enter Bootloader through Vol- + Power. When I connect my Z17 Mini to charger or plug it into my PC, the Home button blinks red. Now I cannot turn it off, the screen is black, but when I try to plug into PC, it notifies that the phone is connected, but when I go to Device Manager, it shows errors as if there is no properly driver for the phone.
Can my phone be rescued? Please help me
Click to expand...
Click to collapse
Try - https://cloud.mail.ru/public/5ta9/9xzYctmjk
Mackay53 said:
Try - https://cloud.mail.ru/public/5ta9/9xzYctmjk
Click to expand...
Click to collapse
Thanks, I will try this. But I'm not sure if this software works, because my phone cannot be recognized in Windows
Mackay53 said:
Try - https://cloud.mail.ru/public/5ta9/9xzYctmjk
Click to expand...
Click to collapse
This version of Nubia Emergency Tool does not support Z17 Mini yet, even the newer version 1.1.1
bountyhunter said:
This version of Nubia Emergency Tool does not support Z17 Mini yet, even the newer version 1.1.1
Click to expand...
Click to collapse
Try to use latest version 1.1.3
I downloaded 1.1.3 from China forum. I think its support z17 mini.
Write to me to PM. I will send you link.
bountyhunter said:
Hi all,
I was trying to install ROM for my Z17 mini, but it was a mistake that I downloaded the Z11 ROM, and install it in TWRP recovery. After rebooting, I cannot enter Bootloader through Vol- + Power. When I connect my Z17 Mini to charger or plug it into my PC, the Home button blinks red. Now I cannot turn it off, the screen is black, but when I try to plug into PC, it notifies that the phone is connected, but when I go to Device Manager, it shows errors as if there is no properly driver for the phone.
Can my phone be rescued? Please help me
Click to expand...
Click to collapse
Was it possible to restore the phone? Tell me how?
Same Status
Hi Dear,
I am having the exactly same status with my Z17mini NX569J_ENCommon_V2.09
Some one please help - its dead.
Pups70 said:
Was it possible to restore the phone? Tell me how?
Click to expand...
Click to collapse
Bricked Z17mini
Hi!
Sorry tried the tool but it just can not detect the device. My device keeps on resetting (sound of USB connect and disconnect comes).
Need help unbrick please help.
Mackay53 said:
Try - https://cloud.mail.ru/public/5ta9/9xzYctmjk
Click to expand...
Click to collapse
Maybe you have to try the Qualcomm QFil.
www.techbmc.com/2017/04/How-To-Use-...Download-To-Unbrick-Qualcomm-devices.html?m=1
darenhoff said:
Hi!
Sorry tried the tool but it just can not detect the device. .
Click to expand...
Click to collapse
Its because you use old version. You need to use new version 1.1.3.
Send you to PM.
My Bad luck!!
Hi! Bro,
Thanks a lot for v1.1.3.
Unfortunately my Z17mini looks totally dead.
The laptop and tools detects the device but unable to write anything.
Comes out with a big red !
But I don't know how to attach image here!
darenhoff said:
Hi Dear,
I am having the exactly same status with my Z17mini NX569J_ENCommon_V2.09
Some one please help - its dead.
Click to expand...
Click to collapse
Bricked Z17mini
Hi,
Is there anyone here who has unbricked a Z17mini and ready to help.
Regards
Hi there.
I have the same isue - bricked Nubia z17 mini.
I try rescue them, but can't find correct working driver for it called: QHSUSB_BULK.
Without them PC (win 10 64bit), cant recognize the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you succeed unbrick the phone? Please share your experience.
I found something about
I found something about, here:
3w. stupdroid.com, slash 2017, slash 04, slash stock-rom-ZTE-Nubia-Z17-mini.html
I hope will work.
uzaktan bağlantı ile ben halledebilirim senin isi
benimde oldu ben nubiaid 1.1.1 ile yaptım. nubia usb sürücüsü yükle sonra güç + ses kısma ile artı bilgisayarın bağladığından otomatik görünene kadar dene bu tuşları. mutlaka bilgisayar görür.
bountyhunter said:
Hi all,
I was trying to install ROM for my Z17 mini, but it was a mistake that I downloaded the Z11 ROM, and install it in TWRP recovery. After rebooting, I cannot enter Bootloader through Vol- + Power. When I connect my Z17 Mini to charger or plug it into my PC, the Home button blinks red. Now I cannot turn it off, the screen is black, but when I try to plug into PC, it notifies that the phone is connected, but when I go to Device Manager, it shows errors as if there is no properly driver for the phone.
Can my phone be rescued? Please help me
Click to expand...
Click to collapse
Its not bricked, try holding all buttons for 15 seconds.
Nubia recovery tools
All the files of nubia emergency recovery tool are encrypted. If anybody can give the password of these files, then unbricking of nubia becomes damn easy. It contains all required rawprogram.xml patch0.xml and other files. Can anyone tell the password of these files? If the password is in chineese then no cracker can unlock it. Whatever tool I found googling, all failed to unlock.
alanasaslt said:
Its not bricked, try holding all buttons for 15 seconds.
Click to expand...
Click to collapse
Related
Hey guys, Ive just successfully rooted my oppo f1s with the latest kingroot last night :laugh: but early on today i cant open my phone :crying: It keeps on rebooting, it only shows the logo then reboots again and again and again, i cant even go to recovery mode, it only stops when battery is drained completely or if its rebooting for too long, i cant remove the battery because it has a non removable battery and i cant shut it down cause it wont :crying::crying::crying::crying: please guys help me, i love that phone so much. I DONT KNOW WHAT IS THE PROBLEM, PLEASE REPLY AND PLS PLS. IF ONe OF YOU KNOWS THE SOLUTION PLS REPLY IMMEDIATELY I WILL APPRECIATE IT SO MUCH (sorry for bad english) PLEASE HELP ME! i just bought it last monday:crying: is it the root the problem or the battery is just wrecked up, this is the only thing that could turn my frown upside down.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have also same problem with oppo f1f. ?
sandiprao said:
I have also same problem with oppo f1f.
Click to expand...
Click to collapse
When did it started? did you root your phone too?
Yes..I did via kingroot and then try to flash twrp via flashfy apk..
sandiprao said:
Yes..I did via kingroot and then try to flash twrp via flashfy apk..
Click to expand...
Click to collapse
does your phone rebootswhenyou are charging? . hope well get a solution in this problem
Are you tried fastboot.. because my device is not detect on pc
I had the same problem after I installed xposed and it's framework the phone rebooted and kept rebooting. I turned it off by pressing power button with volume up. Then booted into recovery by pressing power and volume down then I deleted all the data from one option not as usual recoverise when you delete dalvic and cache then rebooted but the problem was still existed so I deleted data again and the device booted successfully
sandiprao said:
Are you tried fastboot.. because my device is not detect on pc
Click to expand...
Click to collapse
i dont know what is fastboot and i definitely didnt tried it
It is another way to flash ROMs...
yaserch1 said:
I had the same problem after I installed xposed and it's framework the phone rebooted and kept rebooting. I turned it off by pressing power button with volume up. Then booted into recovery by pressing power and volume down then I deleted all the data from one option not as usual recoverise when you delete dalvic and cache then rebooted but the problem was still existed so I deleted data again and the device booted successfully
Click to expand...
Click to collapse
IT WONT LET ME go to recovery mode,. when i tried going to recovery mode, it only shows the oppo logo with a "recovery mode" name located beyond the oppo logo, then reboots again and again. i remember flashing a oppo f1 twrp rom to my phone using the "Official TWRP App" from google play,
link: https://play.google.com/store/apps/details?id=me.twrp.twrpapp
but i dont know if it is successfully flashed, because i does not show any signs such as "TWRP IS SUCCESSFULLY FLASHED, BLAH BLAH BLAH", im so confused now if the flashed were neither successful or not, it only shows nothing when i pressed flash to recovery, then i uninstalled it quickly. That is my conclusion, what do you think
here is the link of the twrp rom: https://twrp.me/devices/oppof1.html
IF YOU KNOW WHAT TO DO, OR OU KNOW YHOW TO REPAIR THIS, PLS EMAIL ME, [email protected] .:fingers-crossed::fingers-crossed:
I WILL APPRECIATE IT SO MUCH, HAPPY HOLIDAYS
sandiprao said:
It is another way to flash ROMs...
Click to expand...
Click to collapse
HOW TO ACCESS IT?
Search on Google...if you don't know then don't mess with ur phone
YES
sandiprao said:
Search on Google...if you don't know then don't mess with ur phone
Click to expand...
Click to collapse
YA'RIGHT MAN, i shouldnt mess up with my phone. i was just being curious, bcoz i know that you know that there are many **** apps in google play, ,hope i'll find a solution:highfive:
Gud luck
HOW TO UNBRICK OPPO A37fw
hit thank if you like
Video tutorial :-
Note :- here download means starting flashing in 10, 11 step
1)First download and install qcom driver and install in pc from here
2) download stock rom from here
size 1.10gb
3)extract the stock rom zip and find "Msm8x39DownloadTool.exe" something like this. in the extracted folder
4) then just left click in start logo u will see menu just open the device manager(not disk manager)
5) Now "power off" your phone connect it to pc through usb , after completly power offed just hold vol+ and vol- button at same time
6) press the both button until your device manager application in windows won't blink
7) now you will see a new "ports" menu is added in middled of list in deviece manager
8) Now just open that exe file in the stock rom folder i told in step 3
9) after opening the "Msm8x39DownloadTool.exe" find in the list if there is written "com" exept of device not connected
10) if you find com then just tick right "reset after download" box and press "start" button
11) after downloading your device will reboot automatically
12) if you device didnt reboot unplug it and press power button for 15-20 second now your phone will start
I don't have volcano boxe
No msm.exe in the folder
aejun said:
No msm.exe in the folder
Click to expand...
Click to collapse
can you provide me the screenshot
Sory sir..I have deleted so no ss
I dont know to use file bcze there's no msm.exe like u say
Does oppo a37fw have a way to unlock root tutorials?
Does oppo a37fw have a way to unlock root tutorials?
Unbrick oppo a33fw bricked only vibrate
please . i need help . my phone crash . only vibrate . no logo . i want flashing but no cant . you can help me ?
TRY THIS
aditya alarcon said:
please . I need help . My phone crash . Only vibrate . No logo . I want flashing but no cant . You can help me ?
Click to expand...
Click to collapse
bro try this file to flashing i tested and working fine Press Thanks Button if working
https://drive.google.com/uc?id=0B54aCovnDpUmcUZJb1pCS0s4TGM&export=download
Yashraj22 said:
can you provide me the screenshot
Click to expand...
Click to collapse
yup no Msm8x39DownloadTool.exe
oppo 37f flashing
plz any one help me
i have oppo a37f . I have already downloaded firmware. In screenshot you can see. in this no msm tool. how i flash a37f with this firmware.
plz help..
thanks in advance...
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oppo A37fw flashing guide with flash file
How to flash oppo a37fw with tools
First download Flash file and install oppo driver.
Extract flash file
open Flash file and open MSm tool on flash file
power of phone and Press vol up and down button and insert Usb cable
Then start and wait after flashing.
Here is the file link : https://www.technicalparivar.com/oppo-a37fw-100-tested-flash-file-gsm-forum/
Press thanks button to support me
Go through this thread. Hope this helps you all..
https://forum.xda-developers.com/general/rooting-roms/oppo-a37fw-guide-rooting-flashing-t3820558
rajuku said:
plz any one help me
i have oppo a37f . I have already downloaded firmware. In screenshot you can see. in this no msm tool. how i flash a37f with this firmware.
plz help..
thanks in advance...
.
Click to expand...
Click to collapse
I tried almost all firmware (Msm8x39DownloadTool.exe) still doesn't boot, it still vibrates during boot but no display but pc/laptop detect oppo driver this sequence goes on loop cycle .. any advice what can I do to save this phone
---------- Post added at 06:27 PM ---------- Previous post was at 06:18 PM ----------
I tried almost all firmware (Msm8x39DownloadTool.exe) still doesn't boot, it still vibrates during boot but no display but pc/laptop detect oppo driver this sequence goes on loop cycle .. any advice what can I do to save this phone ( this oppo phone got it from a friend already had a this problem i have no idea which model for i know this a37 series i don't know which on the 3 of this a37 / a37f / a37fw, i hope somebody could help me..... thanks
oppo a37f
I have a problem with oppo a37 given by a friend to me when I power on it only vibrate and has no display, and when it is plug on laptop/ pc it will be detected showing oppo setup driver but in a few seconds it will be disconnected/ and connected in a loop cycle .. I've already tried to flash and upload new firmware i got the same result... could you help what to do...
jeffrey.floresta said:
I have a problem with oppo a37 given by a friend to me when I power on it only vibrate and has no display, and when it is plug on laptop/ pc it will be detected showing oppo setup driver but in a few seconds it will be disconnected/ and connected in a loop cycle .. I've already tried to flash and upload new firmware i got the same result... could you help what to do...
Click to expand...
Click to collapse
try this firmware
https://forum.xda-developers.com/oppo-a37/how-to/oppo-a37fw-guide-rooting-flashing-t3820558
I see the Link Firmware Shared Already Broken Link
Hello guys,
I tried to update my phone to Nougat and I guess I totally failed.
First I just tried to flash this rom: https://forum.xda-developers.com/axon-7/development/rom-purefusionos-official-t3670580 and it did not work. So I thought I might have to update the firmware first and installed the A2017UV1.1.0B32 NOUGAT Update from this thread: https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484. I found out I had to flash (with TWRP) the firmware's G version so I took the A2017G_N_Modem.zip from this https://androidfilehost.com/?w=files&flid=148464.
Now I only get the "your device software can't be checked for corruption. Please lock the bootloader".
Can somehow help me and tell me if and how I can get a rom working again?
Thanks in advance.
Check forum. There are topics to unbrick your device.
Yes, I read the forums. My Problem is that I cannot enter the EDL mode for example. When I git Power + Vol Up + Vol down nothing happen except a shot red LED.
EDIT: I cannot get into fastboot aswell.. Always that screen with lock your bootloader. Pretty much the only mode I can enter is recovery with TWRP.
multimill said:
Yes, I read the forums. My Problem is that I cannot enter the EDL mode for example. When I git Power + Vol Up + Vol down nothing happen except a shot red LED.
EDIT: I cannot get into fastboot aswell.. Always that screen with lock your bootloader. Pretty much the only mode I can enter is recovery with TWRP.
Click to expand...
Click to collapse
When led blinked you are on EDL mode. Screen is black on edl mode.
Yeah I got that an now i completely **** up -.-
I made it to go back to stock. I saw yeah got that B10 version now so I tried to flash PureFusionOS and Beans GApps. Now the screen is just black when I start the phone and my computer (and one other I tested) cannot flash the the edl version via Miflash because the phone is not recognized.
When I try to enter EDL the led is not blinking anymore. Its just showing red.
multimill said:
Yeah I got that an now i completely **** up -.-
I made it to go back to stock. I saw yeah got that B10 version now so I tried to flash PureFusionOS and Beans GApps. Now the screen is just black when I start the phone and my computer (and one other I tested) cannot flash the the edl version via Miflash because the phone is not recognized.
When I try to enter EDL the led is not blinking anymore. Its just showing red.
Click to expand...
Click to collapse
Do you see your device on Device Management? If yes, it is on edl mode. go on other steps
BTW, use this guide.
WesTD said:
Do you see your device on Device Management? If yes, it is on edl mode. go on other steps
BTW, use this guide.
Click to expand...
Click to collapse
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
multimill said:
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
Click to expand...
Click to collapse
Good luck. Your device on DFU Mode. There another guide about it.
multimill said:
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
Click to expand...
Click to collapse
4th category brick repair manual, google it
Hi guys! I put a bad ROM on my phone and I can not turn it on and the computer does not recognize it ever since.
This text is displayed. Your device is booting noww .... It does not detect vol- power, vol + vol- power. I can not turn it off because it always turns itself on. Please help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to turn off completely you need to remove the back cover and remove 7 screws and then remove also the battery cable and putthe cable back in. no other way.
Kcetin20 said:
to turn off completely you need to remove the back cover and remove 7 screws and then remove also the battery cable and putthe cable back in. no other way.
Click to expand...
Click to collapse
Then can I reinstall the factory rom?
rpeti33 said:
Then can I reinstall the factory rom?
Click to expand...
Click to collapse
yes, the phone needs to be fully shutdown and he wont do that cause he restarts just normally, either you got 2 options. take out battery or drain the battery. when you shut down the phone tell me ill provide you 2 files.
Kcetin20 said:
yes, the phone needs to be fully shutdown and he wont do that cause he restarts just normally, either you got 2 options. take out battery or drain the battery. when you shut down the phone tell me ill provide you 2 files.
Click to expand...
Click to collapse
I fully discharged the battery. Volume down, connected to usb, the phone is registered. No google packages are available. vol + and vol- do not respond to. vol + vol- power reboots again but again the boot screen. Adb device reads. At the moment when I start again for some reason or force straight to the above picture comes in.
rpeti33 said:
I fully discharged the battery. Volume down, connected to usb, the phone is registered. No google packages are available. vol + and vol- do not respond to. vol + vol- power reboots again but again the boot screen. Adb device reads. At the moment when I start again for some reason or force straight to the above picture comes in.
Click to expand...
Click to collapse
so you managed to start the device normally or not ?
Kcetin20 said:
so you managed to start the device normally or not ?
Click to expand...
Click to collapse
No. Always the same. I think something is missing or system.
fastboot doesn't load at all
rpeti33 said:
No. Always the same. I think something is missing or system.
fastboot doesn't load at all
Click to expand...
Click to collapse
what firmware you got right now and what is your country c432 ? i will send you a file.
Kcetin20 said:
what firmware you got right now and what is your country c432 ? i will send you a file.
Click to expand...
Click to collapse
Hungary.
Model: PRA-LX1
Build: PRA-LX1C02B155
Emui: 5.0.1
Android: 7.0
Huawei p9 Lite 2017
I hope you can help me.
help me i also like got trouble like this owner post
help me dude...
now drain already my battery p9.. then when i connect usb to device ... my pc not detect on adb or fastboot cmd.
adb get-state
uknown..
now pls help me resolve
this problem.. sory newbie here
rpeti33 said:
Hungary.
Model: PRA-LX1
Build: PRA-LX1C02B155
Emui: 5.0.1
Android: 7.0
Huawei p9 Lite 2017
I hope you can help me.
Click to expand...
Click to collapse
It does not send the file?
rpeti33 said:
It does not send the file?
Click to expand...
Click to collapse
I don't know anything about p8...if it was p9 lite i would help..
P9 Lite 2017 PRA-LX1 B184
Kcetin20 said:
what firmware you got right now and what is your country c432 ? i will send you a file.
Click to expand...
Click to collapse
Hello guys....
I'm having the same trouble as the owner of this post!
The story is as follows:
I tried to Root my phone and ended up screwing something most probably it was the TWRP old version.
Anyways now the phone is stuck on the "Your phone is booting" mode
The situation is that you can not use any of the BUTTON methods coz the phone just reboots back into the same screen.
When u drain the battery and replug into the charger it turns on automatically and boots into ANDROID but no GOOGLE apps and no KEYBOARD on screen.
Please, can anyone be constructive enough to read the above and give me a solution coz I have been reading throughout a lot of threads and no Solution to this so far?
Note:
Phone is in Unlock mode
FRP is Unlocked too
Don't ask me to use adb to get to bootloader or use keys to get there "coz it does not work"
Device name: Huawei P9 Lite 2017
Model: PRA-LX1
EMUI: 5.0.1
Country: Greece
Would appreciate your help coz seems like a lot of people are having the same issue with no solution.
I'm reaching the point of throwing the new phone against the wall to see how far it will bounce back........
Thank you.....
Hi.
I tried to update my mother in law Huawei p8 lite,phone in settings showed there is a firmaware update available,so I done a backup then download via wifi android 6.0,after download complete its asked me to procced so i click to yes,phone restart to upgrade mode but was stuck on 0% progress for very long time so I tried to restart the phone via power off button but after that phone doesnt start again any more.
So I readed a lot what to do but nothing work for me.
I download android 6.0 to pc then copy dload folder to sd card,then when card in phone I pressed volume + and - and power the same time but nothing happend,phone just vibrate once for very short time and nothing.
I tried also using adb procedure but phone is not recognized in my laptop with windows 8,all drivers installed I believe,I have mined all internet for proper drivers,all adb and fastboot drivers installed,included huawei drivers and HiSuite softaware and even Handset WinDriver installed and windows 8 only seen device like on picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged phone to laptop via usb cable,short vibrate and nothing,so I press power off and volume down same time and laptop see something but not properly,please check below:
ADB not seen any adb device after command "adb devices" .
I can manulally choose driver for that like e.g ADB interface device but ADB still not see anything.
Tried also with disconnected battery couse read on this forum its help sometimes but nothing,still same.
After doing all that just realize sometimes red led blinking so its mean battery is down,and wont charge via usb on the phone,so I charged battery via external charger connected straight to the wires on battery,now red led not blinking.
Tried also on another laptop with windows xp,same ,nothing happend,adb not see anything,but sometimes in device manager phone is recognized as below:
On other forum when is recognized like that its possible to fix but need special usb box,which I ovcourse dont have.
What else I can try?
Summary:
phone not recognized in laptop,even with unplugged battery
phone wont start,no logo nothing
wont update from sd card wiht dload
is it totally brick?
pls help/
Hi!
i think your phone board was damage in process, happened to me on a Alcatel Idol... The same thing. I think the phone was already a bit laggi, no?
.
Phone was not worked properly,thats what my mother in law said.
Its sometimes show just white screen after unlock,or camera wont switch on.
And battery draining fast.I thought firmware upgrade will fix it but its brick now(
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
alsat1 said:
Update:I have fixed the phone with dc phoenix software-Installed new board firmware and then stock rom and its all ok now.
Click to expand...
Click to collapse
It would be useful if you did a little tutorial with links.
Thank you
MARCOSOFT said:
It would be useful if you did a little tutorial with links.
Thank you
Click to expand...
Click to collapse
I found informations and tutorial on xda forum so its all here
alsat1 said:
I found informations and tutorial on xda forum so its all here
Click to expand...
Click to collapse
Did you have to pay for the phoenix software?
MARCOSOFT said:
Did you have to pay for the phoenix software?
Click to expand...
Click to collapse
Yes 15 euro for 72hours.