Hey, I am a brand new developer who has just built a lineage port that I plan on adding features to later on. These are some of the things I plan on adding:
-Aroma installation. I plan on making this ROM completely aroma installation based. Users can install customizations such as Magisk, Theme engines, advanced status bar customizations, etc. People can make it as feature-filled as they want.
-If no options are selected in aroma, the ROM will become an Unofficial lineage port.
As I am new to Android development, I will need some help getting this ROM off the ground.
But first, I need people to test if the ROM in its stock Lineage OS glory actually works. This is because I encountered fetch errors and I need to make sure that the ROM actually works the way it is should. Feedback is needed for this.
I am also unsure of how to use AROMA installer as all the guides are outdated and/or do not explain things properly.
BTW I think I should call this ROM "Custom ROM". Because people can customise it. You can see that I need help.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Google Apps
-OpenGApps/BeansGAppshttp://downloads.aospextended.com/gapps/http://downloads.aospextended.com/gapps/http://downloads.aospextended.com/gapps/
Want to try this ROM?
Code:
[b]-Download the ROM and GApps of your choice
-Backup each and every partition from TWRP Recovery
-Make a full wipe (system, data, cache, dalvik)
-Flash ROM Package
-Install GAPPS package
-Wipe cache!
-And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended![/b]
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
All sort of contributions are welcomed. We don't want our users to fight with each other so we humbly request you to be respectful to each other. I am not earning anything by sharing this ROM. Always read the full OP. Don't Quote the whole OP.
People behind this amazing ROM!
Soneliem(me)
Sources
-My source code
-Original LineageOS source code
I guess there is nothing wrong in reading facts!
Base Of the ROM & Version?
->Rom is based on LineageOS
-Which Gapps are recommended?
->OpenGapps AROMA
-Will this ROM relock the bootloader?
->No.
-What about XPOSED?
->XPOSED For N is not out yet. Still in development. We like Xposed but it messes up with the system so before giving any bug reports make sure you have xposed uninstalled.
-When Will Be the Next Update?
->No ETAs please. ROM Will be updated whenever the new build is ready.
-I am facing FCs, Bugs, Some feature is broken?
->Provide full info about your problem with logcats and the procedure to reproduce it.
->How to take Logcats?
https://goo.gl/UcTM9
Thread design stolen from the AEX team. I will change everything later.
Very good concept, could be customized to the maximum before installing.
Count on me to prove it
Thank you
BTW, I use Linux on a virtual machine. My host is already pretty low speced, so the builds will take time to make. I am also an active student which complicates the matter even more.
2 cores, 4gb ram. Integrated graphics.
UPDATE
The very first build of this ROM is being built! As I have said at the top of the OP, This build is just to check if the LineageOS sources were downloaded properly and other errors. And after this build, I can proudly call myself an Android Developer. (hopefully)
I am unsure if this will work. I have already received 100+ warning and have no idea what they mean. I haven't received any errors yet, so there shouldn't be much of a problem.
Hope this builds!
UPDATE-2
My VM crashed. I have also got some issues with Ubuntu so I have replaced it with Elementary OS. It is really smooth and everything is working fine. I am currently syncing the source. Oh and about the source. I have forked LineageOS and have rebased my source there. Any help is appreciated. I will be busy most of the time so this ROM building will take time.
Source: https://github.com/Soneliem/android
Unfortunately I have made this a long term project that will not be actively looked at. I planned on actually making this ROM but more I am giving away this idea to anyone.
Sent from my Huawei Watch using XDA Labs
Mods may close this thread. Anyone may use my idea as their own without credit.
Related
This is the works of burnsra, kalim, and mostly, the entire CyanogenMod Team. None of this is my original work, I am merely
sharing this so CM10 information can be consolidated in one thread for that specific purpose, instead of the many scattered and mislabeled threads we currently have. Again, this is none of my original work, I am just sharing CM10 for crespo4g with the community.
Links to those who have contributed-
http://forum.xda-developers.com/showthread.php?t=1403247, http://forum.xda-developers.com/showthread.php?t=1399035, http://www.cyanogenmod.com/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 10 to the Nexus S 4G, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Night Builds can be found here: http://get.cm/?device=crespo4g
ChangeLog: http://cm10log.appspot.com/?device=crespo4g
REMEMBER TO INSTALL GAPPS ALWAYS AFTER INSTALL AND UPDATED ROM.
For those who want to install faceunlock read this: https://plus.google.com/u/0/111722836277981844223/posts/2LthtkGD8aY
TO MAKE A CLEAN INSTALL. LOOK HERE
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Runs nice, any chance of a link to Burns' gapps the ones that give up camera options for photo syncing ?
Excellent work.Thank you very much.
Moved to general, if you didn't build it, it doesn't belong in development
This came fast. I never tried CM much, how does it work when switching to a new nightly (or future RC/Final)? Does that work without wiping?
veyka said:
Moved to general, if you didn't build it, it doesn't belong in development
Click to expand...
Click to collapse
But now there are two threads in general about the CM10 nightly builds :/
almizilero said:
This came fast. I never tried CM much, how does it work when switching to a new nightly (or future RC/Final)? Does that work without wiping?
Click to expand...
Click to collapse
This has been around for a month. I usually just wipe cache & dalvic, then flash rom & gapps between updates, unless told to do more, or if I run into major issues.
ehiggins said:
Runs nice, any chance of a link to Burns' gapps the ones that give up camera options for photo syncing ?
Click to expand...
Click to collapse
Check the original thread for this rom.
Sent from my Nexus S 4G using Tapatalk 2
Let me get this straight. The OP made a thread to link us to another thread?
Should we use the new GAPPS, even thought they say they are for 4.2.1?
blu8503 said:
Should we use the new GAPPS, even thought they say they are for 4.2.1?
Click to expand...
Click to collapse
If you want a faulty behaviour, sure.
Sent from my Nexus S using Tapatalk 2
Nice work my friend . . . :good:
Deprecated, move to http://forum.xda-developers.com/oneplus-3/development/rom-unofficial-cyanogenmod-13-t3399089
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13.0 builds for OnePlus 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Features:
Now the device is mainly maintained by Grarak, Steve Kondik, Altaf Patel and me
Merged latest f2fs stable branch for linux 3.18.y, F2FS is supprted
Update kernel to linux 3.18.36
Support CDMA
Support call recording
Camera HDR mode works well
SELinux set to enforcing
Enabled cpusets
Known bugs:
No VOOC/DASH support
To be discovered
TODO:
Add kernel level color calibration support
Perf related enhancement
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, my TWRP is highly recommended because it supports both decryption and F2FS: http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
https://github.com/cyanogenmod/android_device_oneplus_oneplus3
https://github.com/cyanogenmod/android_kernel_oneplus_msm8996
https://github.com/TheMuppets/proprietary_vendor_oneplus
Changelog:
16/6/21:
First release with latest CM source
16/7/3:
Sync latest CM source
Update proprietary blobs
Steve pulled lots of telephony patches from CAF, he says telephony now works fine for him
Miscellaneous bug fixes and tweaks
Download:
https://s.basketbuild.com/devs/dianlujitao/oneplus3/cm13
Credits:
CyanogenMod Team
Code Aurora Forum
OnePlusOSS
ivan19871002 (graphics and camera HDR mode)
Grarak
Steve Kondik
Altaf Patel
Other CyanogenMod developers
XDA:DevDB Information
CyanogenMod, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2016-07-03
Created 2016-06-21
Last Updated 2016-07-03
been fan of your work on honor 4x and z9 max...good to see you here...
good job! Wonder whether the camera could be as good as the stock one
I get com.andorid.phone FC during setup stage. Cannot complete setup.
--deleted--
Volte is broke FYI.
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Maybe you have 2 sim cards, right. Remove one and try...
Good job done bro
..keep up
Sent from my TECNO W4 using Tapatalk
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Had the same problem restarted to twrp re-wiped everything and re-flashed and been smooth sailing ever since.
Are you going to add sRGB mode?
I've an issue with .mp4 files.
All work fine except .mp4 files ... mu OP3 cannot read them, all of them !
Someother with this strange issue ?
No VoLTE. Here's a logcat.
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Bradl79 said:
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Click to expand...
Click to collapse
Works with CM
itsLewin said:
Works with CM
Click to expand...
Click to collapse
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Bradl79 said:
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Click to expand...
Click to collapse
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Planet X said:
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Click to expand...
Click to collapse
Yeah I have done that too lol, other than that anything else I need to do
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
matssa said:
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
Click to expand...
Click to collapse
Still WIP in many fields
dianlujitao said:
Still WIP in many fields
Click to expand...
Click to collapse
Yeah I thought so ^^ But since Grarak isn't sharing any new builds (mostly because there is WIP), I though that maybe you could share yours Anyhow, I hope CM13 will sort out official builds sonn
About Lineage OS:
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Warning:
If you have a repaired Nexus 5 this ROM may not boot on your device. Allegedly certain replacement display units / panels have issues with higher tick-rates. Read this thread for more information.
Instructions:
1. Download the package
2. Factory reset if coming from another ROM.
3. Install ROM
4. Install GApps (optionally) [Recommended -> Open GApps (arm64) (7.1)
Downloads:
BUILD-INFO:
20170101:Welcome lineageOS,Spammers feature "VoLTE",
Reporting Bugs:
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
NOTE:
It can take little bit extra time to boot.
In beginning of ROM(First Boot)you will face lags but use it for for a while & after using for a while you can see a difference then ROM will not lag anymore.
Ignore red lines in twrp while flashing ROM (E:unknown command [log]
Do not flash the ROM as secondary in multirom it will loop
Credits:
Me for Developing
@karthick mostwanted for everything
CAF
CyanogenMod | LineageOS
SOURCE:
why you posting it
You are not the real developer so why posting it
Remove it as soon as possible -__-
@rahul kumar this isn't your build so better take the thread off before we tag mods this builds belong to my friend prateek and he has done enough of hardwork getting volte working you are doing noting but proving yourself fool stealing someone else hardwork
chaubeyprateek said:
You are not the real developer so why posting it
Remove it as soon as possible -__-
Click to expand...
Click to collapse
dev_harsh1998 said:
@rahul kumar this isn't your build so better take the thread off before we tag mods this builds belong to my friend prateek and he has done enough of hardwork getting volte working you are doing noting but proving yourself fool stealing someone else hardwork
Click to expand...
Click to collapse
Just report the threads and move on guys, this person isn't worth wasting time on when there's a clean way out.
Sent from my YU4711 using XDA Labs
Thread closed at OP's request
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATION
Hi all,
This ROM is in a very early development stage, so you can expect a lot of things broken.
Please don't expect to use this ROM as a daily driver.
What is working:
Audio (playback)
Bluetooth
Graphics
Camera - photo, video recording (w/out audio)
Sensors
RIL
GPS
Wifi
USB
Video playback (HW/SW)
What is not working:
Audio recording
Proximity & Orientation sensors
GPS
Camera may not start at times
System time issues (alarm might not work or start with a delay)
maybe yet something
Download:
AndroidFileHost
Installation order:
The installation below requires a repartition of the phone internal sdcard in order this ROM fit on /system partition. DO NOT proceed an installation if you are unsure what you're doing and how to deal with a possible consequencies.
before installation make sure you have a TWRP recovery
install chrono kernel (both ROM and the corresponding kernel are located in the same directory - see ROM link below)
reboot recovery
flash ReParted zip. This will wipe system, data and cache partitions!
install ROM
install chrono kernel again
*please note a possibly undesirable effect of the repartition: cache partition will be decreased to 15 MB and some ROMs that rely upon this partition won't boot. To restore original sdcard partition layout, flash stock 4.1.2 ROM (with PIT file).
Credits:
@SergeyL
@rINanDO
@AdrianDC
@3liteking148
@Meticulus
@Unjustified Dev
@golden-guy
@nieltg
@isaak
@NovaFusion
@TeamCanjica
LineageOS community
Google
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source code:
Manifest: LOS 16.0
Device tree: LOS 16.0,
Kernel: LOS 16.0
other repos
XDA:DevDB Information
LineageOS 16.0, ROM for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP recovery 3.x
Version Information
Status: Alpha
Created 2018-12-31
Last Updated 2018-12-31
Reserved
Reserved
Wow, works better than Oreo
Srsly, little more tweaking and this is suitable for daily use
is it possible to implement these functions in the janice kernel?
github.com/pelya/android-keyboard-gadget
Gonna try it today in 5 hours maybe, use it for a day and give my feedback. thanks for keeping this phone alive. Also have u tried magisk with this rom? I will try it anyway but i just wanted to know.
Here is my feedback.
1- No space for flashing pico gapps so I guess we will have to use microG.
2- Random freezes that takes like a minute then locks the phone.
3-Sometimes, WiFi didn't work and I had to restart. When pressing the icon it flashes green then goes back to grey again.
4-Bluetooth isn't working at all ( not sure if it's only me or what because it never worked on LOS 15.1 too ).
5-GPS not working as well.
6-I hope you add HardwareKeys remap, navigation gestures and Traffic monitor, of course if you don't mind.
..
That's pretty much it. If you can fix the second and third problems, this ROM can be used as a daily driver.
Sent from my GT-I9070 using XDA Labs
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Bx16 said:
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Click to expand...
Click to collapse
Nice to see some efforts of developing custom ROMs here, but amount of non-working features scares me
I would rather stick updating some my older ROMs like UltimateROM (but no promises though).
Mainlining/forward porting work always comes handy, irrespective of whether one's interested to Android/Linux or GNU/Linux.
I cannot believe this device is still getting updates
excuse my rudeness but do u plan on updating this rom or should i lose hope ?
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
DeathArcanaXIII said:
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
Click to expand...
Click to collapse
You have to upgrade from 2.3 rom to a 4.2 rom first like this (if it didn't work, consider using this )in order to upgrade the bootloader then you can install this rom. But i wouldn't recommend this rom as its not stable. LOS 15.1 is far more stable for a daily driver.
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
.czarodziej said:
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
Click to expand...
Click to collapse
https://wiki.lineageos.org/gapps.html (you need GApps for ARM platform).
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
oseiasrodrigues0 said:
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
Click to expand...
Click to collapse
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
enkflr said:
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
Click to expand...
Click to collapse
Is that the gts7582 has lineageos 15 It initializes only does not work anything video, audio, etc. So I thought some dev could solve the bugs of this ROM. But thank you very much for the answer
I installed lineage os 16 on my s advance this is how it went:
1. Bluetooth kept crashing idk why but i uninstalled the bluetooth apk so it dosen't work at all
2. MicroG
It works fine i flashed it and it has signuature spoofing already on yay and it dosen't get stuck in the boot animation after restart
3. Kernel
Oh yeah overclocking is fun i overclocked the cpu to the max and it works amazing
4. Camera
Works but not video
Its ok but bluetooth sadly not working but idc
Its not my main phone anyway thankgod <3
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* lost data due to failed backups, etc, etc.
* flash at your own risk
*/
How to flash this ROM:
Download the zip file. (Make sure to download the file for your specific device)
Make sure this zip file is saved to your device (I prefer transferring to sd card to allow for full wipe of data on phone).
If you want Google Play functionality, download OpenGApps (link below). (optional)
Reboot into TWRP (latest version recommended)
Make a backup (optional).
Wipe System, Data, Cache, and Dalvik Cache partitions with Advanced Wipe. (I like wiping internal data too, do NOT wipe SD Card!)
Flash the ROM you just downloaded.
Flash OpenGApps for Android 9.0 if you want Google services (optional) (I prefer nano or pico).
If you want root, flash Magisk.
Reboot and proceed normally with installation.
Download links:
Official 16.0 coming out soon from actual developers.
OpenGApps 9.0 (I use pico): http://opengapps.org
Source code:
LineageOS on GitHub
jfuginay (forked from LineageOS, and rest of the developers mentioned in the following Credits) on Github
Credits:
The LineageOS Team
haggertk
Trader418
andr01dfr3ak
temasek
TheMuppets
Version Information:
ROM OS Version: Android 9.0 Pie
Known Bugs: not sure, needs testing, so you tell me. bluetooth calls may not be working
Please report bugs with logcat
Screenshots
Known bugs:
None reported yet, in testing.
Any meaningful reason why you're posting inofficial builds?
AFAIK you're not affiliated with us in any way. And you haven't done any work for shamu. So users reporting bugs to you is just a waste of their time, as you're not going to fix them.
You're just picking some very low hanging fruits.
There's really no need for them especially because we're shipping soon.
Also proper credits would have been nice.
I have a good friend with a shamu phone, he wanted to upgrade his phone so I helped him out. As of yet, I haven't seen any Lineage OS 16.0 ROMs so I spent all yesterday attempting to build one.
It finally completed with no errors, and that seems like a meaningful enough reason to post an unofficial build to me.
I don't own a shamu, and sorry if I left out credits where credit is due for people bringing shamu specific code up to pie, feel free to message me names and I'll include them in the credit section.
Jfuginay said:
I have a good friend with a shamu phone, he wanted to upgrade his phone so I helped him out. As of yet, I haven't seen any Lineage OS 16.0 ROMs so I spent all yesterday attempting to build one.
It finally completed with no errors, and that seems like a meaningful enough reason to post an unofficial build to me.
I don't own a shamu, and sorry if I left out credits where credit is due for people bringing shamu specific code up to pie, feel free to message me names and I'll include them in the credit section.
Click to expand...
Click to collapse
The reason why there are no unoffical builds is that we don't really want to have any for devices which are going to be supported officially.
I know that you had good intentions, but posting inofficial builds doesn't make it easier for us devs.
Elektroschmock said:
The reason why there are no unoffical builds is that we don't really want to have any for devices which are going to be supported officially.
I know that you had good intentions, but posting inofficial builds doesn't make it easier for us devs.
Click to expand...
Click to collapse
Alright, that makes sense. I wasn't aware shamu was going to be included in the devices receiving official Lineage 16.0 ROMs. I'll go ahead and remove the download link, and refer my friend to your signature to download ROMs for his phone.
Like I mentioned, I don't have a shamu, I'm on a Note 3 (hltetmo) and have been building my own LineageOS 16.0 (even though members of the official Lineage team such as Haggertk are building unofficial ROMs for my Note 3 too).
You're correct that my building hasn't included any actual fixing of bugs and getting those fixes submitted into official builds, but you have to start somewhere, right?
Jfuginay said:
Alright, that makes sense. I wasn't aware shamu was going to be included in the devices receiving official Lineage 16.0 ROMs. I'll go ahead and remove the download link, and refer my friend to your signature to download ROMs for his phone.
Like I mentioned, I don't have a shamu, I'm on a Note 3 (hltetmo) and have been building my own LineageOS 16.0 (even though members of the official Lineage team such as Haggertk are building unofficial ROMs for my Note 3 too).
You're correct that my building hasn't included any actual fixing of bugs and getting those fixes submitted into official builds, but you have to start somewhere, right?
Click to expand...
Click to collapse
Yes I know that haggert and others are distributing unofficial builds. What I meant is we are not to eager of unofficial builds of people not affiliated with us in any way.
It's always getting messy if 2-3 people post unofficial builds and users think they're using the real thing.
I'm always happy if someone wants to help, but without a test device it's going to be close to impossible for you to test anything properly.
Where is the download?
girkev said:
Where is the download?
Click to expand...
Click to collapse
Now that I post here - the link is above and below your post.
Elektroschmock said:
Now that I post here - the link is above and below your post.
Click to expand...
Click to collapse
Sorry don't see link