Hi i have problem with my spirit,not boot after logo automatic go on kernel crash screen and on the end write "jump to dload",i cant flash kdz with flash tooldo you have some ideas??? Thnx in advice
What exactly did you do prior to this issue appearing?
And why aren't you able to flash kdz with the LG FlashTool?
Related
Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!
clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.
anyone can help?
Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps
After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)
Did you solve this?
problem is that im stuck with very serious issue.. i have f320l with sonyue gpro 2 port rom...
i want to come to stock ..so i try to flash it with tot..but smart flasher all gives error that ur model is D802..
so i changed in build.prop...i wrote model no F320 not f320l so Lg flashed tool again gives error at tot file flashing
i want to change bulid.prop again but my phones becomes unusable and gives error at home screen that home has stopped so i cant change the build.prop too..
at last i try to flash with lg flash tool online with KDZ but it gives error at 47 percent..
no recovery
no home screen operate so i change model from Build.prop
just download mode..
so what options left???
any help plz
LG G2 F320L recovery mode
I was trying to flash kitkat rom, and i got stuck into boot loop. Now i can't go to recovery mode or flash my phone. I am in a terrible situation right now.
OMIEWU said:
I was trying to flash kitkat rom, and i got stuck into boot loop. Now i can't go to recovery mode or flash my phone. I am in a terrible situation right now.
Click to expand...
Click to collapse
Do you have download mode now?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
- LG E612 stuck in lg logo after I update v20f stock rom (4.1.2).
I tried an update by LG Support Tool, KDZ Update, LG Flash Tool 2014 but remains stuck in lg logo.
- I also try to update rom available v20d root, unlock bootloader & recovery but still hanging.
- My phone is damaged the volume down button, I can not access the hard reset or recovery.
What can I do? Please help me .. Tks
You should hard reset your phone if you want to keep the updated software. Or you can re-install the V20F firmware via KDZ Updater tool.. Try that.. However you should fix your volume keys because all above mentioned methods requires that.
Well, I searched for a solution for a long time but I couldn't find one.
I accidentally flashed CloudyG3 2.5 on my LG G2 Korean LG U+ Variant (F320L).
I got HS-USB Diagnostics 9006 on my device manager and I managed to recover it via this thread.
I couldn't use the tool right way cause they didn't have my variant, so I extracted images from F320L TOT and replaced those aboot.img, laf.img, etc.
I got into the download mode and launched LG FlashTool (the TOT FlashTool) and loaded up my TOT and DLL on the tool and attempted to flash.
BUT the error "CrossDL [F400] to [F320L]" was shown in the log.
I think this problem is caused by flashing G3 ROM on my G2, changing the model name in system partition.
I have no idea how to solve this problem.
I tried flashing all kinds of g2 dll, but failed.
I considered flashing the G3 firmware, change the information on the phone, and re-flash g2 firmware, but I think that's gonna make the problem more difficult...
I tried booting into recovery and flash g2 custom firmware, but no recovery mode.
I tried fastboot mode, but phone just says "Security Error" and won't let me get into fastboot mode.
What should I do?
Please ask me if you don't understand exact situation. Sorry for my bad english...
try https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
amin44 said:
try https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
Click to expand...
Click to collapse
Thanks. I had a different problem, but fixed it.
Could you write how did you fix it so if someone need it
Hi i am new in the forum and have a issue with my LG V20 F800k. That what is on back of him( under battery)
When i get him he have some koreantelekom firmware. When i check in settings -about- that say H918....
I flash with TWRP "H91820f" and he is so bad. Mobile restarting all time, wi-fi don't work all time. And when start after lg logo i have T-Mobile logo. No more koreantelekom: ). Maybe bad rom
I try to flash stock rom with LGUP, but with no success.I go to bootload mode on phone,.First LGUP asked me .dll for H918. Found it . Put him in common folder in LGUP, but when i want to flash stock rom (upgrade bottton in lgup) process start, but after 17 seconds i got an error in setup (click herer to continue) . When i press again display me command port error-3
Can someone help me with flashing stock rom?
Thanks