But it fails availability check with or without IMEI. I'm on B183. If anyone succeeds in installation, please let us all know.
you are not allow for update new firmware.
Pushed update to system updater through FF, downloading right now. Will this update fail compatibility check before installation?
egotheist said:
Pushed update to system updater through FF, downloading right now. Will this update fail compatibility check before installation?
Click to expand...
Click to collapse
if on stock firmware without rooting doubtful it will install considering Huawei hasnt not yet approved the firmware (at least according to FF)
I use hwota method for update new firmware.
Downloading but I bet it will fail....
UPDATE. As expected, failed.
newyesor said:
I use hwota method for update new firmware.
Click to expand...
Click to collapse
Still 7.0, I guess no 7.1.2. We'll just be jumped up to 8
Successful update via HWOTA, C636B187
What Google security patch is included?
STEVED520 said:
What Google security patch is included?
Click to expand...
Click to collapse
Android security patch level 01/08/17
chinosan said:
Successful update via HWOTA, C636B187
Click to expand...
Click to collapse
Same here, working well :good:
I dont know to install via HWOTA....i wait to autorization in FF.
gurita said:
I dont know to install via HWOTA....i wait to autorization in FF.
Click to expand...
Click to collapse
If you're game to give the HWOTA method a try, there are some instructions over in this thread: https://forum.xda-developers.com/mate-9/how-to/mha-l29bc636b183-firmware-available-t3625358/page4
Make sure you do a full back up (I've found Hi-Suite does a great job of this) as it will wipe your phone.
Just updated to B187
How can you guys update if it's not approved for authorisation? Unless approved for certain countries?
tboy2000 said:
How can you guys update if it's not approved for authorisation? Unless approved for certain countries?
Click to expand...
Click to collapse
HWOTA method
STEVED520 said:
HWOTA method
Click to expand...
Click to collapse
Ah but HWOTA requires you to be rooted to use TWRP
tboy2000 said:
Ah but HWOTA requires you to be rooted to use TWRP
Click to expand...
Click to collapse
HWOTA only require you to have your bootloader unlocked with require files.
chinosan said:
Successful update via HWOTA, C636B187
Click to expand...
Click to collapse
Is there an error of raw format for build in camera MHA-L29C636B187?
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
Texan1 said:
Same here, working well :good:
Click to expand...
Click to collapse
Is there an error of raw format for build in camera MHA-L29C636B187? Could you check it?
---------- Post added at 09:56 AM ---------- Previous post was at 09:34 AM ----------
soft-touch said:
Just updated to B187
Click to expand...
Click to collapse
can you use raw format camera via build in camera app in the version B187?
akaravqm said:
Is there an error of raw format for build in camera MHA-L29C636B187?
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
Is there an error of raw format for build in camera MHA-L29C636B187? Could you check it?
---------- Post added at 09:56 AM ---------- Previous post was at 09:34 AM ----------
can you use raw format camera via build in camera app in the version B187?
Click to expand...
Click to collapse
Camera app works without issue. Did you mean default camera settings?
Related
It seems 20p firmware is out. Anybody tried?
link: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW59PZO032KOAXH4D42BF5I/D85520P_00.kdz
Source: https://twitter.com/lg_firmware
Changelog???
batuhanb85 said:
It seems 20p firmware is out. Anybody tried?
link: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW59PZO032KOAXH4D42BF5I/D85520P_00.kdz
Source: https://twitter.com/lg_firmware
Click to expand...
Click to collapse
Installed it fine on my D855 32GB version.
Showing as V20p-GLOBAL-COM instead of TWN.
Someone will get the Ota to see the changelog
how to root?
azim_47 said:
how to root?
Click to expand...
Click to collapse
That has nothing to do with this post. Use search.
trouble to root also :\
just install v20g and try the manually Method
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
and it didnt work no root
Same here, unable to root V20p.
-delete-
i cant update my device coz the system detects that my device has been rooted though i already unroot it in the SuperSU app as stated on the One Click root thread.
Flashed with flash tool over 20h on a phone from VDF Romania. All went well, nothing spectacular to report works and seems as snappy (or choppy) as 20H was. Needs some settling in to decide but guess there are improvements (or slowdowns) somewhere there deep in the code.
hi can someone confirm the baseband version on their about .
i just flashed the modem only and i want to confirm it went ok.
many thanks
so whats new ? any news for when we will get the 5.1 SW -_-
---------- Post added at 07:47 AM ---------- Previous post was at 07:45 AM ----------
[/COLOR]
cheeze.keyk said:
i cant update my device coz the system detects that my device has been rooted though i already unroot it in the SuperSU app as stated on the One Click root thread.
Click to expand...
Click to collapse
Try this :- . Thanks to @Lennyuk http://forum.xda-developers.com/showthread.php?t=2802286
573v3 said:
---------- Post added at 07:47 AM ---------- Previous post was at 07:45 AM ----------
[/COLOR]
Try this :- . Thanks to @Lennyuk http://forum.xda-developers.com/showthread.php?t=2802286
Click to expand...
Click to collapse
I already updated my device. I just flashed the Stock Lollipop firmware. :good:
Is the KDZ update method rootable after updating to 20p ? Dont have custom recovery and i wont install one.
palooh81 said:
Is the KDZ update method rootable after updating to 20p ? Dont have custom recovery and i wont install one.
Click to expand...
Click to collapse
I was unable to root from stock flash using v1.3 one click root, ended up having to install the pre rooted version in rom dev section.
mjgr33n said:
Installed it fine on my D855 32GB version.
Showing as V20p-GLOBAL-COM instead of TWN.
Click to expand...
Click to collapse
how can i istall it on my 32gb version? i have not root (v20h)
madiweb said:
how can i istall it on my 32gb version? i have not root (v20h)
Click to expand...
Click to collapse
You do not need root to install with KDZ files numerous guides to do it on the forums with a quick search.
the most important change is voLTE support, at least here in italy
New Update!!
The title on this thread is just a bit misleading... This in no way explains how to install, what kind of Z5 P device it is or anything... Hardly worth a whole new thread, either, when this is being discussed in the 'Marshmallow available now' thread...
Still don't have the OTA
---------- Post added at 07:48 PM ---------- Previous post was at 07:21 PM ----------
check that if it fixed your issue with the wifi
engineer000 said:
Still don't have the OTA
---------- Post added at 07:48 PM ---------- Previous post was at 07:21 PM ----------
check that if it fixed your issue with the wifi
Click to expand...
Click to collapse
Check if your firmware region has received it through:
Xpericheck.com
Or:
Fwchecker.com
Sent from my Z5 Premium using XDA Labs
KbaB.BroS said:
Check if your firmware region has received it through:
Xpericheck.com
Or:
Fwchecker.com
Sent from my Z5 Premium using XDA Labs
Click to expand...
Click to collapse
Yes. But I need the one with Root so I think I better stay and wait on the older firmware. also, I need the exact firmware for my phone for better coverage.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
engineer000 said:
Yes. But I need the one with Root so I think I better stay and wait on the older firmware. also, I need the exact firmware for my phone for better coverage.
Click to expand...
Click to collapse
I think I have latest firmware from :
1298-2969 Customized MAA 32.1.A.1.185-R7C
Same customization of mine but I'll wait for the one rootable.
Hi OP. Were you be able to update it?pls consider to check if the kernel is the same as stock version of firmware 163? if it is still the same, I think we can still use the current custom kernels
Kernel is the same.
Sent from my E6853 using Tapatalk
Does a diffrent firmware void your warranty? And if i do can i also turn back to my own cda when tmobile nl 6.0 has been released?
For E6853
The custom kernels work, but it's registered at the older firmware version, making the system update pop up even though you have it installed. I customized the stock kernel for the latest update with the help from @tobias.waldvogel tool from:
http://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605
Click to expand...
Click to collapse
It has DRM restore injected, latest TWRP 3.0.1 and support for root. The rest is stock.
I would recommend flashing the latest firmware with Flashtool without wiping any data and flash the kernel afterwards in fastboot
Fastboot flash boot kernel.img
Click to expand...
Click to collapse
Make sure to navigate to the correct directory you have it downloaded so it can detect the IMG.
No need for installing recovery as it already has this. From recovery just flash the latest SuperSU and you have root.
Download from:
https://mega.nz/#!6tRVla7J!coZpEEd3yE6yygBQ0ED93ZKG6SRbde2D0k0fGDkyS_8
Click to expand...
Click to collapse
I've unlocked the bootloader and replaced with TWRP.
However, TWRP doesn't handle the OTA updates automatically.
Is there a way to use TWRP to do the update?
If not, is there a way to replace TWRP with the stock recovery?
This is for a Moto G4, build number MPJ24.139-48
TWRP can't handle OTA updates. You have to reflash the stock recovery in order to apply OTAs. You can grab -48's stock ROM here, pull out the recovery.img, boot into fastboot and flash it like you did TWRP.
Ok just had an update ota a flashed stock recovery but now when i hit xheck update its coming back as device up to date any advice
flashfire should be able to do the OTA for you, or you can do an adb sideload. do you mind if I ask which g4 you have and which OTA you are seeing? i have an amazon channel xt1625, and was lucky enough to unlock the bootloader before that window closed, but I haven't seen or heard of any OTA's for the amazon or non-amazon channel devices.
trevorcobb said:
flashfire should be able to do the OTA for you, or you can do an adb sideload. do you mind if I ask which g4 you have and which OTA you are seeing? i have an amazon channel xt1625, and was lucky enough to unlock the bootloader before that window closed, but I haven't seen or heard of any OTA's for the amazon or non-amazon channel devices.
Click to expand...
Click to collapse
I just got a notification for an OTA update that says it's for "call stability improvement while driving"...
I have the US XT1625 model...
NoobNeutralizer said:
I just got a notification for an OTA update that says it's for "call stability improvement while driving"...
I have the US XT1625 model...
Click to expand...
Click to collapse
any way you can grab the URL from logcat for me?
trevorcobb said:
any way you can grab the URL from logcat for me?
Click to expand...
Click to collapse
How do I do that?
NoobNeutralizer said:
How do I do that?
Click to expand...
Click to collapse
http://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
trevorcobb said:
http://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
Click to expand...
Click to collapse
Give me 5-10 minutes...
I'll grab it for you...
Busy pooping at the moment...
NoobNeutralizer said:
Give me 5-10 minutes...
I'll grab it for you...
Busy pooping at the moment...
Click to expand...
Click to collapse
did we just become best friends?! :good:
trevorcobb said:
did we just become best friends?! :good:
Click to expand...
Click to collapse
Do I have to start downloading it for the URL to appear?
the article says to not download it. maybe click check for updates again, then do the logcat?
Click to expand...
Click to collapse
the article says to not download it. maybe click check for updates again, then do the logcat?
---------- Post added at 08:14 AM ---------- Previous post was at 08:05 AM ----------
NoobNeutralizer said:
Do I have to start downloading it for the URL to appear?
Click to expand...
Click to collapse
the article says to not download it. maybe click check for updates again, then do the logcat?
trevorcobb said:
the article says to not download it. maybe click check for updates again, then do the logcat?
---------- Post added at 08:14 AM ---------- Previous post was at 08:05 AM ----------
the article says to not download it. maybe click check for updates again, then do the logcat?
Click to expand...
Click to collapse
Trying...
The only URL it keeps finding is the release note URL...
---------- Post added at 10:27 AM ---------- Previous post was at 10:20 AM ----------
Let me try restarting the phone and doing it again...
BRB...
---------- Post added at 10:32 AM ---------- Previous post was at 10:27 AM ----------
https://argo.svcmot.com:443/v1/cs/c...79488?appId=6R1TANEX3ZMQ6EU1UH43P34C8B
868KTE
Is that it?
---------- Post added at 10:39 AM ---------- Previous post was at 10:32 AM ----------
I've tried about 50 times and those 2 are the only URLs that I'm seeing...
The "release notes" and that other one...
---------- Post added at 10:41 AM ---------- Previous post was at 10:39 AM ----------
Should I try "CatLog" on the actual phone?
NoobNeutralizer said:
Give me 5-10 minutes...
I'll grab it for you...
Busy pooping at the moment...
Click to expand...
Click to collapse
I just finished scrubbing my eyes with Clorox.
NoobNeutralizer said:
Trying...
https://argo.svcmot.com:443/v1/cs/c...279488?appId=6R1TANEX3ZMQ6EU1UH43P34C8B868KTE
Should I try "CatLog" on the actual phone?
Click to expand...
Click to collapse
I tried the URL and it didn't work. If you don't mind running catlog that would be sweet. thank you!
trevorcobb said:
I tried the URL and it didn't work. If you don't mind running catlog that would be sweet. thank you!
Click to expand...
Click to collapse
CatLog isn't pulling up anything either...
Wtf is going on?
A new update just showed up on firmware finder. Hopefully we'll get it in another month or so. By the amount of features and changes it is bringing it might be EMUI 5.1
Edit: Turns out it is just EMUI 5.
ayush rao said:
A new update just showed up on firmware finder. Hopefully we'll get it in another month or so. By the amount of features and changes it is bringing it might be EMUI 5.1
Click to expand...
Click to collapse
But we are waiting for emui 8.0.0 and they are pushing 5.1 now??
It aint EMui 5.1, frd-l09 got this update earlier names aas B399.
Leon Lambra said:
It aint EMui 5.1, frd-l09 got this update earlier names aas B399.
Click to expand...
Click to collapse
Did it get all the same features?
Sent from my Honor 8 using XDA Labs
ayush rao said:
Did it get all the same features?
Click to expand...
Click to collapse
Yes
ayush rao said:
A new update just showed up on firmware finder. Hopefully we'll get it in another month or so. By the amount of features and changes it is bringing it might be EMUI 5.1
Edit: Turns out it is just EMUI 5.
Click to expand...
Click to collapse
It's still not approved for installation.
Sent from my FRD-L04 using Tapatalk
Ya it is really annoying.
Sent from my Honor 8 using XDA Labs
Only addition is 3D image and recycle bin and security ofcourse
Anybody install it?
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
anybody install it?
stanbel said:
Anybody install it?
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
anybody install it?
Click to expand...
Click to collapse
Can not install it, it not approved for install
---------- Post added at 09:53 PM ---------- Previous post was at 09:11 PM ----------
stanbel said:
Anybody install it?
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
anybody install it?
Click to expand...
Click to collapse
can not install now. It not approved for install
blackbuffalo said:
Can not install it, it not approved for install
---------- Post added at 09:53 PM ---------- Previous post was at 09:11 PM ----------
can not install now. It not approved for install
Click to expand...
Click to collapse
Not even via dload?
shashank1320 said:
Not even via dload?
Click to expand...
Click to collapse
I think not because I try unzip but cant unzip UPDATE.APP
blackbuffalo said:
I think not because I try unzip but cant unzip UPDATE.APP
Click to expand...
Click to collapse
Then a corrupted file may be
shashank1320 said:
Then a corrupted file may be
Click to expand...
Click to collapse
Dont think that, I tried download 2 times, thinks cause by huawei
You should use Firmware Finder, check firmware access, if it say approved you can flash, if not ,dont try
blackbuffalo said:
Dont think that, I tried download 2 times, thinks cause by huawei
You should use Firmware Finder, check firmware access, if it say approved you can flash, if not ,dont try
Click to expand...
Click to collapse
I checked a week back and it was not approved.
Do one thing, just dload the update-full_frd-l04_hw_usa file and it should work and update your system to b391 (99.99%)..based on my past experience
---------- Post added at 05:52 PM ---------- Previous post was at 05:23 PM ----------
blackbuffalo said:
Dont think that, I tried download 2 times, thinks cause by huawei
You should use Firmware Finder, check firmware access, if it say approved you can flash, if not ,dont try
Click to expand...
Click to collapse
I just downloaded and extracted all files
---------- Post added at 10:57 PM ---------- Previous post was at 10:22 PM ----------
blackbuffalo said:
Dont think that, I tried download 2 times, thinks cause by huawei
You should use Firmware Finder, check firmware access, if it say approved you can flash, if not ,dont try
Click to expand...
Click to collapse
I am doing it. you dont try please. Seems not working. Checking more.
good, I have a small concern to do when the rom has nothing to do with the application udate, the case is the following my honor 8 has the rom frd-l04c567b389 and when trying to update the frd-l04c567b391 error, and it lowered the rom official of several pages and servers and when using the huawei extractor to flash by ADB commands do not appear the cust in ninuna rom, I can only flash the boot, recovery and system, how important are the cust
I'm still on the B389 update and when I check to see if there's an update it shows that it's up to date. What's going on?
xsacter said:
I'm still on the B389 update and when I check to see if there's an update it shows that it's up to date. What's going on?
Click to expand...
Click to collapse
Wait some days, It on the way
Updated my FRD L-14 to B391 five days ago and haven't noticed any difference at all.
It's same old crap.
besides mentioned features, only battery life has been better. at least for me.
Hey guys, the update to Oreo for the S8 Active on T Mobile is live on Sammobile as of 04/01/2018:
https://www.sammobile.com/firmwares/galaxy-s8-active/SM-G892U/TMB/download/G892USQU1BRC4/213523/
Be sure to download and use the Odin 3.13.1 linked on the download page in the instructions ONLY as any older versions of Odin will not work properly according to Sammobile.
Any update on TWRP or root?
I'm looking too. I just got this phone yesterday.
pwoolston said:
Any update on TWRP or root?
Click to expand...
Click to collapse
Septaric said:
I'm looking too. I just got this phone yesterday.
Click to expand...
Click to collapse
there is a thread on this device and a stock rooted rom in development
there is no twrp only safestrap as this device has a locked bootloader........
tdgillihan said:
Hey guys, the update to Oreo for the S8 Active on T Mobile is live on Sammobile as of 04/01/2018:
https://www.sammobile.com/firmwares/galaxy-s8-active/SM-G892U/TMB/download/G892USQU1BRC4/213523/
Be sure to download and use the Odin 3.13.1 linked on the download page in the instructions ONLY as any older versions of Odin will not work properly according to Sammobile.
Click to expand...
Click to collapse
Thanks! I'll give it a try!
pwoolston said:
Thanks! I'll give it a try!
Click to expand...
Click to collapse
What is safestrap? and if I have and do I need the same version of Oreo on my phone to flash or can I flash over a newer or an older version with Odin. Thanks!!
---------- Post added at 09:08 PM ---------- Previous post was at 08:41 PM ----------
pwoolston said:
Thanks! I'll give it a try!
Click to expand...
Click to collapse
I downloaded the firmware but I want to make sure this is a rooted version of Oreo. Is it???
pwoolston said:
What is safestrap? and if I have and do I need the same version of Oreo on my phone to flash or can I flash over a newer or an older version with Odin. Thanks!!
---------- Post added at 09:08 PM ---------- Previous post was at 08:41 PM ----------
I downloaded the firmware but I want to make sure this is a rooted version of Oreo. Is it???
Click to expand...
Click to collapse
Stock Samsung Touchwiz Oreo- not rooted.
Any update on a root anytime soon for Oreo Cookie for this phone?