If you are a proud owner of a Samsung Galaxy S3 (GT-I9300), but unfortunatly, your S3 was brought from china, maybe you have the versión GT-i9300_CHN_CHN.
This Version of Galaxy S3, has the bootloader blocked, then we can not flash international firmware in this model, because odin fail in modem.
In my first steps, i found a post with a firmware mixed a French files, and China Files in one Rom (thanks to XDA). But with ICS, ( 4.1.1). So because i like put he newest, i search around the net, and XDA, and i found some ways to do that.
This is the tutorial to do that.
STEP 1.
You Need to confirm, if really you have the Gt-i9300_CHN_CHN.
Put your Mobile on Download mode ( it show in chinese) and press Vol+, in the same way you do when you flash with Odin. (to enter Download Mode press: Vol-, Power; Home)
In the Screen Must appear PRODUCT NAME: GT-i9300_CHN_CHN, It´s means, you have a Chinese Version ( its International, But Chinese).
Another way its Pressing in your Phone *#1234# and its show your versión.
The latest version on china is:
GT-I9300 Galaxy S III
PDA: I9300ZCEMD2
CSC: I9300CHNEMD2
MODEM: I9300ZCELL1
Added: 2013-04-14
The Official Link from samfirmware:
http://www.hotfile.com/dl/204467117/3bfe5c1/I9300ZCEMD2_I9300CHNEMD2_CHN.zip.html
http://www.hotfile.com/dl/204467117/3bfe5c1/I9300ZCEMD2_I9300CHNEMD2_CHN.zip.html
STEP 2.
Download the Latest CHINA FIRMWARE. and the firmware you prefer, I use the Spain (PHE)
The Official Link from Samfirmware:
Model: GT-I9300
Country: Spain
Version: Android 4.1.2
Changelist: 1287119
Build date: Thu, 27 Jun 2013 15:44:00 +0000
Product Code: PHE
PDA: I9300XXEMF6
CSC: I9300PHEEMF1
MODEM: I9300XXEMF6
Here is the Official Link from samfirmware:
http://www.hotfile.com/dl/233642717/ff467e6/I9300XXEMF6_I9300PHEEMF1_PHE.zip.html
STEP 3.
Once you have both firmwares ( china and your preferred firmware), you need to change the extensión of both files, you need to unrar your files, then you have something like this:
CHINESE FIRMWARE:
KIES_HOME_I9300ZCEMD2_I9300CHNEMD2_1133994_REV00_user_low_ship.tar.md5
SPAIN FIRMWARE:
I9300XXEMF6_I9300PHEEMF1_I9300XXEMF6_HOME.tar.md5
You need to delete the extensión .md5, it must have only .tar, just rename in Windows.
Then the both files we use are:
KIES_HOME_I9300ZCEMD2_I9300CHNEMD2_1133994_REV00_user_low_ship.tar
I9300XXEMF6_I9300PHEEMF1_I9300XXEMF6_HOME.tar
STEP 4.
Once you renamed both files, you need to unpacking.
To unpack your firmwares, you can use WINRAR, or another software who can work with tar files.
Or you can Use TOTAL COMMANDER, ( i prefer Total Commander)
https://mega.co.nz/#!WcUW3AbK!Y7yAFEL2nd_rApcW-DEliBCIokFG1em--FH28t5ifWY
STEP 5.
Once you have both firmwares unpacked, ( in diferent folders), you have to use some files from CHINA, and some files from Spain
In Both Folders we have these files:
Boot.img
Cache.img
Hidden.img
Modem.bin
Recovery.img
Sboot.bin
System.img
Tz.img
STEP 6.
From the China Firmware, I used these Files:
Sboot.bin
Tz.img
Modem.bin
From the Spain firmware, I used the rest of the files:
Boot.img
Cache.img
Hidden.img
Recovery.img (recovery can be omitted if you have a custom recovery and you don't want lose it)
System.img
We need put these files together,, if you have some software to pack files in Tar, Use it! ( with winrar you can only unpack, but you cannot repack)
In this step, i still Using Total Commander.
With total commander, you must put your files in the same folder, and click on PACK FILES.
The file resultant, is a tar file, ( you can rename the file as you want)
This file is flasheable by ODin, put in PDA just like another firmware. And flash it as the same way you know.
Remember: this is important: before you flash, you must do Factory reset, and format cache partition, in order to have a clean installation. ( many people dont do that, and after time, the mobile seems to have bugs, it is because need factory reset, and cache partition, so, DO IT!)
Once ODIN finish to flash, you must have a Galaxy S3 CHN, with Nordic Countries firmware, but with modem, and bootloader chinese.
There is Another Way to pack and unpack tar files, if you use Linux, search XDA for this, or you can use CYGWIN, wich is a Linux Console for Windows. ( search in XDA too)
With CYGWIN you can unpack and pack in tar and generate md5 checksum firmwares.
You Can change your firmware in other way too.
First you need to flash the CHINA firmware as it comes, without modifications.
Next you only need to open the Nordic Countries Firmware, with total commander, and delete, modem.bin, tz.img, sboot.bin, the rest of files still in rom. You can delete recovery too, if you have a custom one. (don’t forget backup the original file)
Then, Flash this rom without modem, via ODIN, in PDA, y that is all!.
Next you need to do Factory reset and Format Cache partition.
Note: CAUTION!, Backup your EFS folder, just in case.
Note 2: i don't test newest firmware, because the newest firmware from spain or Nordic Countries, are incompatible with the Structure and partitions in these firmwares, so, if you want use the newest firmware, try the new CHN firmware, and some firmware near to the build date of the China firmware.
If you mix incompatible firmwares, you will lost your IME.. DON'T BE AFRAID, YOU DON'T LOSS IT, IT IS JUST THERE, IN A DIFFERENT PARTITION.
In that case, return your old CHN firmware, and you will recover your IMEI, ( I do it twice)
I EDIT THIS POST TO CHANGE THE LINKS, SO ALL THE LINKS ARE THE GOOD ONE USING SPAIN XXEMF6.
THIS WORKS FINE, TESTED BY ME,
Enjoy
Please: If you like this post, click THANKS :good:, Post a Reply, and share...
Nice job Cpaez. Now if only someone would figure this out (or if they have, share it with the rest of us) for the i9308, then all us China users would be set. i9308 is still SOL unfortunately.
is there any way to unpack the system.img , edit the files and pack it back into the .md5 file and then flash it with odin?
Spixe1 said:
Nice job Cpaez. Now if only someone would figure this out (or if they have, share it with the rest of us) for the i9308, then all us China users would be set. i9308 is still SOL unfortunately.
Click to expand...
Click to collapse
Maybe I can make a firmware for the users of i9308, Just let me know wich is your firmware, or compatible ( China), and what you prefer to have,(international or european), and i will make one for you. I cannot be able to test it, but, you can test it, and share your experience, you always can return to original firmware.
Does this also work for the GT-i9300_CHN_CU firmware?
popcorn1122 said:
is there any way to unpack the system.img , edit the files and pack it back into the .md5 file and then flash it with odin?
Click to expand...
Click to collapse
Check this thread:
http://forum.xda-developers.com/showthread.php?t=1081239
And This One:
http://forum.xda-developers.com/showthread.php?t=2294909
First you need to unpack the rom, Modify the system.img, and repack the rom again, you can flash it without .md5 cheksum, just flash the tar file.
If you want the md5 checksum, you need to type this in Linux console:
$md5sum -t filename.tar >> filename.tar
$mv filename.tar filename.md5
If you dont have Linux, you can use CYGWIN, this is a Linux console for Windows.
Nilist said:
Does this also work for the GT-i9300_CHN_CU firmware?
Click to expand...
Click to collapse
probably, you can test it, i am uploading the file in Mega, i will share the file, you can test it, if doesnt work, you must flash again, your original rom.
Hi, i am new in this forum, so i hope i can use it in the right way.
First of all, thank you very much for this tuturial... very clear.
The model of my cellphone is GT-9300_CHN_CU, its safe to use this method? Before i flash any rom on my cellphone using Odine i want to backup efs folder and the current rom, so my question is, can i root my device with CWM using odin, this procedure wil not mess the bootloader?
Best regards
Odin with multiple files
Hi, i downloaded the official rom to my device (FACTORY_I9300ZNEMD2_I9300CHUEMD2_CHU), but i this file contains 4 files... BOOTLOADER_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CODE_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CSC_CHU_I9300CHUEMD2_1133994_REV00_user_low_ship.tar and MODEM_I9300ZNEMA1_862886_REV00_user_low_ship.tar.
how to flash it using odin?
Thanks
FMBLima said:
Hi, i am new in this forum, so i hope i can use it in the right way.
First of all, thank you very much for this tuturial... very clear.
The model of my cellphone is GT-9300_CHN_CU, its safe to use this method? Before i flash any rom on my cellphone using Odine i want to backup efs folder and the current rom, so my question is, can i root my device with CWM using odin, this procedure wil not mess the bootloader?
Best regards
Click to expand...
Click to collapse
Its, safe, you can do this with any firmware, many people change the modem.bin, to increase performance in signal, wifi, etc ( in our case we cannot do that).
There are many apks to backup your EFS, The most simple is with "Galaxy S unlock"need to be root in any case.
I root with Philz Touch and it works fine. You need to flash philz_touch_5.06.1-i9300.tar.md5 via Odin ( in PDA), restart in recovery mode, select install zip from sd card, and select Root_SuperSU.0.98-Busybox.1.20.2-signed restart your phone, and backup EFS folder.
Caution!, Root, and the rom you make with this tutorial, avoid your guarantee, because it is a custom rom, and increase the flash counter ( Red Exclamation Sign in the upper left of the screen during the boot)
You CANNOT, use triangle away, to clear the flash counter, because the bootloader is blocked.
Good Luck
FMBLima said:
Hi, i downloaded the official rom to my device (FACTORY_I9300ZNEMD2_I9300CHUEMD2_CHU), but i this file contains 4 files... BOOTLOADER_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CODE_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CSC_CHU_I9300CHUEMD2_1133994_REV00_user_low_ship.tar and MODEM_I9300ZNEMA1_862886_REV00_user_low_ship.tar.
how to flash it using odin?
Thanks
Click to expand...
Click to collapse
where do download this firmware?
Open all of these files, i think they are in parts, so, you can extrac all of them and use only the files you need.
Nilist said:
Does this also work for the GT-i9300_CHN_CU firmware?
Click to expand...
Click to collapse
I can't test in your model, you can try, or do your own custom firmware.
read below the next post.
if you do it is under your own risk, be careful
Cpaez said:
If you are a proud owner of a Samsung Galaxy S3 (GT-I9300), but unfortunatly, your S3 was brought from china, maybe you have the versión GT-i9300_CHN_CHN.
This Version of Galaxy S3, has the bootloader blocked, then we can not flash international firmware in this model, because odin fail in modem.
In my first steps, i found a post with a firmware mixed a French files, and China Files in one Rom (thanks to XDA). But with ICS, ( 4.1.1). So because i like put he newest, i search around the net, and XDA, and i found some ways to do that.
This is the tutorial to do that.
STEP 1.
You Need to confirm, if really you have the Gt-i9300_CHN_CHN.
Put your Mobile on Download mode ( it show in chinese) and press Vol+, in the same way you do when you flash with Odin. (to enter Download Mode press: Vol-, Power; Home)
In the Screen Must appear PRODUCT NAME: GT-i9300_CHN_CHN, It´s means, you have a Chinese Version ( its International, But Chinese).
Another way its Pressing in your Phone *#1234# and its show your versión.
The latest version on china is:
GT-I9300 Galaxy S III
PDA: I9300ZCEMD2
CSC: I9300CHNEMD2
MODEM: I9300ZCELL1
Added: 2013-04-14
The Official Link from samfirmware:
http://www.hotfile.com/dl/204467117/3bfe5c1/I9300ZCEMD2_I9300CHNEMD2_CHN.zip.html
http://www.hotfile.com/dl/204467117/3bfe5c1/I9300ZCEMD2_I9300CHNEMD2_CHN.zip.html
STEP 2.
Download the Latest CHINA FIRMWARE. and the firmware you prefer, I use the Spain (PHE) firmware or the Nordic Countries (NEE)SPAIN, In this Tutorial i used NEE.
GT-I9300 Galaxy S III
PDA: I9300XXEMG4
CSC: I9300PHEEMG2
MODEM: I9300XXEMG4
Added: 2013-08-05
The Official Link from Samfirmware:
http://www.hotfile.com/dl/238007598/676d37e/I9300XXEMG4_I9300PHEEMG2_PHE.zip.html
NORDIC COUNTRIES
GT-I9300 Galaxy S III
PDA: I9300XXEMG4
CSC: I9300NEEEMG2
MODEM: I9300XXEMG4
Added: 2013-08-08
Here is the Official Link from samfirmware:
http://www.hotfile.com/dl/238606055/6249bfd/I9300XXEMG4_I9300NEEEMG2_NEE.zip.html
STEP 3.
Once you have both firmwares ( china and your preferred firmware), you need to change the extensión of both files, you need to unrar your files, then you have something like this:
CHINESE FIRMWARE:
KIES_HOME_I9300ZCEMD2_I9300CHNEMD2_1133994_REV00_user_low_ship.tar.md5
NORDIC COUNTRIES FIRMWARE:
I9300XXEMG4_I9300NEEEMG2_I9300XXEMG4_HOME.tar.md5
You need to delete the extensión .md5, it must have only .tar, just rename in Windows.
Then the both files we use are:
KIES_HOME_I9300ZCEMD2_I9300CHNEMD2_1133994_REV00_user_low_ship.tar
I9300XXEMG4_I9300NEEEMG2_I9300XXEMG4_HOME.tar
STEP 4.
Once you renamed both files, you need to unpacking.
To unpack your firmwares, you can use WINRAR, or another software who can work with tar files.
Or you can Use TOTAL COMMANDER, ( i prefer Total Commander)
https://mega.co.nz/#!WcUW3AbK!Y7yAFEL2nd_rApcW-DEliBCIokFG1em--FH28t5ifWY
STEP 5.
Once you have both firmwares unpacked, ( in diferent folders), you have to use some files from CHINA, and some files from Nordic Countries.
In Both Folders we have these files:
Boot.img
Cache.img
Hidden.img
Modem.bin
Recovery.img
Sboot.bin
System.img
Tz.img
STEP 6.
From the China Firmware, I used these Files:
Sboot.bin
Tz.img
Modem.bin
From the Nordic Countries firmware, I used the rest of the files:
Boot.img
Cache.img
Hidden.img
Recovery.img (recovery can be omitted if you have a custom recovery and you don't want lose it)
System.img
We need put these files together,, if you have some software to pack files in Tar, Use it! ( with winrar you can only unpack, but you cannot repack)
In this step, i still Using Total Commander.
With total commander, you must put your files in the same folder, and click on PACK FILES.
The file resultant, is a tar file, ( you can rename the file as you want)
This file is flasheable by ODin, put in PDA just like another firmware. And flash it as the same way you know.
Remember: this is important: before you flash, you must do Factory reset, and format cache partition, in order to have a clean installation. ( many people dont do that, and after time, the mobile seems to have bugs, it is because need factory reset, and cache partition, so, DO IT!)
Once ODIN finish to flash, you must have a Galaxy S3 CHN, with Nordic Countries firmware, but with modem, and bootloader chinese.
There is Another Way to pack and unpack tar files, if you use Linux, search XDA for this, or you can use CYGWIN, wich is a Linux Console for Windows. ( search in XDA too)
With CYGWIN you can unpack and pack in tar and generate md5 checksum firmwares.
You Can change your firmware in other way too.
First you need to flash the CHINA firmware as it comes, without modifications.
Next you only need to open the Nordic Countries Firmware, with total commander, and delete, modem.bin, tz.img, sboot.bin, the rest of files still in rom. You can delete recovery too, if you have a custom one. (don’t forget backup the original file)
Then, Flash this rom without modem, via ODIN, in PDA, y that is all!.
Next you need to do Factory reset and Format Cache partition.
Here is the links of the Rom I Made for my Galaxy S3
I9300XXEMG4_I9300NEEEMG2_I9300ZCELL1_modem_chn.tar.part1
https://app.box.com/s/bxqbc0ic4xlzf4khfahl
I9300XXEMG4_I9300NEEEMG2_I9300ZCELL1_modem_chn.tar.part2
https://app.box.com/s/1fhdxz6c2jp2d7pmdpye
I9300XXEMG4_I9300NEEEMG2_I9300ZCELL1_modem_chn.tar.part3
https://app.box.com/s/qij1txpml75yp70gg7su
I9300XXEMG4_I9300NEEEMG2_I9300ZCELL1_modem_chn.tar.part4
https://app.box.com/s/pfp1iy2h3gwn17yyuzt1
NOTE: Its Seems to be a problem with the cheksum of the file I9300XXEMG4, just del, the .md5 extension, and flash as .tar in Odin. Its, works I Test it personally.
Enjoy
Please: If you like this post, click THANKS :good:, Post a Reply, and share...
Click to expand...
Click to collapse
I have a Problem flashing this Rom, I don Know was becaumy se the rom, or because HC-KTOOL, when i install this rom, i lost My IMEI, so, i think this rom is not compatible with the Chinese versión.
Backups your EFS folder, if you have trouble with this.
I will try later to do again, i recover my imei and my phone is working again. So BE CAREFUL AN DO IT UNDER YOUR OWN RISK.
Cpaez said:
Its, safe, you can do this with any firmware, many people change the modem.bin, to increase performance in signal, wifi, etc ( in our case we cannot do that).
There are many apks to backup your EFS, The most simple is with "Galaxy S unlock"need to be root in any case.
I root with Philz Touch and it works fine. You need to flash philz_touch_5.06.1-i9300.tar.md5 via Odin ( in PDA), restart in recovery mode, select install zip from sd card, and select Root_SuperSU.0.98-Busybox.1.20.2-signed restart your phone, and backup EFS folder.
Caution!, Root, and the rom you make with this tutorial, avoid your guarantee, because it is a custom rom, and increase the flash counter ( Red Exclamation Sign in the upper left of the screen during the boot)
You CANNOT, use triangle away, to clear the flash counter, because the bootloader is blocked.
NOTE DO NOT USE HC-KTOOL, IT BRICKS MY PHONE DELETE IMEI. ( I am try to fix it)
Good Luck
Click to expand...
Click to collapse
I Fix It, It was'nt HC-KTOOL, was the firmware, SORRY, this firmware appear to be incompatible.
I Flash Again, another firmware without modem, and i recovery my imei.
Don try this firmware, or do it under your own risk.
I can't use triangle away!! so on the next year i can't increment the counter... there is one way to do that, with framaroot, right?
I think odin mobile is much safe than odin because it doesn't flash the boot and efs for our safe, so we don't need to care about mess efs folder and loose that important information.
And when the warranty finishes i can replace the bootloader for the international model?
Best regards
Thanks
---------- Post added at 06:28 AM ---------- Previous post was at 06:15 AM ----------
Hi, i downloaded the firmware in two different places, one with "KIES_HOME_I9300ZNEMD2_I9300CHUEMD2_1133994_REV00_user_low_ship.tar.md5". And another in SamMobile.com witch contains "BOOTLOADER_I9300ZNEMD2_1133994_REV00_user_low_ship .tar, CODE_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CSC_CHU_I9300CHUEMD2_1133994_REV00_user_low_ship.t ar".
I extracted all the files and the files are the same and with the same size with one exception, the firmware i downloaded on SamMoibile.com have one more file than the other... this files is param.bin, this file is important or i can ignore it?
Thanks
Cpaez said:
I Fix It, It was'nt HC-KTOOL, was the firmware, SORRY, this firmware appear to be incompatible.
I Flash Again, another firmware without modem, and i recovery my imei.
Don try this firmware, or do it under your own risk.
Click to expand...
Click to collapse
Hi Cpaez, I was just about to try your method of combining a China Unicom ROM (in my case I9300ZNEMB2_I9300CHUEMB2_CHU, don't know why it's not _CHN, but that was what the phone came with) with the Nordic countries ROM (I9300XXEMG4_I9300NEEEMG2_NEE)
Now I got cautious, so before I proceed:
- It will always increase the flash counter if I combine firmwares like you describe?
- In that case might as well root (was hoping not to)
- There is no way of resetting the flash counter on Chinese firmware phones?
- Which firmware did you flash to get your IMEI back?
- Is the conclusion that you cannot marry the China Unicom firmware with the Nordic countries firmware?
- If so, is there another international firmware where it works?
Thanks
Nilist said:
Hi Cpaez, I was just about to try your method of combining a China Unicom ROM (in my case I9300ZNEMB2_I9300CHUEMB2_CHU, don't know why it's not _CHN, but that was what the phone came with) with the Nordic countries ROM (I9300XXEMG4_I9300NEEEMG2_NEE)
Now I got cautious, so before I proceed:
- It will always increase the flash counter if I combine firmwares like you describe?
- In that case might as well root (was hoping not to)
- There is no way of resetting the flash counter on Chinese firmware phones?
- Which firmware did you flash to get your IMEI back?
- Is the conclusion that you cannot marry the China Unicom firmware with the Nordic countries firmware?
- If so, is there another international firmware where it works?
Thanks
Click to expand...
Click to collapse
Hi Cpaez, I think your NEE firmware may simply have been too new:
http://forum.xda-developers.com/showthread.php?t=2377731
Apparently the firmwares from July onwards changes the EFS folder format, and I would guess that the problem arises because we are mixing the versions. I will try with a firmware from the same month/series (Bx) as my China Unicom.
Nilist said:
Hi Cpaez, I was just about to try your method of combining a China Unicom ROM (in my case I9300ZNEMB2_I9300CHUEMB2_CHU, don't know why it's not _CHN, but that was what the phone came with) with the Nordic countries ROM (I9300XXEMG4_I9300NEEEMG2_NEE)
Now I got cautious, so before I proceed:
- It will always increase the flash counter if I combine firmwares like you describe?
- In that case might as well root (was hoping not to)
- There is no way of resetting the flash counter on Chinese firmware phones?
- Which firmware did you flash to get your IMEI back?
- Is the conclusion that you cannot marry the China Unicom firmware with the Nordic countries firmware?
- If so, is there another international firmware where it works?
Thanks
Click to expand...
Click to collapse
Always increase the flash counter, i dont know how the phone knows is custom rom, even if the rom is made with oficial firmware.
To reset flash counter, you need root, you can root your phone, but, as i read in this fórum, theres no way to reset the flash counter, in this model, because of the restriction of the bootloader blocked. ( it need to Access the Bootloader, and it is dangerous)
I never tried to reset the flash counter, I don't care about that. so in my experience, i can't tell you exactly if really you can or cannot do it.
YES, You can Marry China Unicom with Nordic Countries, just not with the versión i metioned up.
My first rom was
I9300XXEMD3_I9300NEEEME1_NEE ( Nordic Countries) plus I9300ZCEMD2_I9300CHNEMD2_CHN( China), It WORKS great!
My Second Rom was
I9300XXEMF6_I9300PHEEMF1_PHE ( Spain) plus I9300ZCEMD2_I9300CHNEMD2_CHN( China), It WORKS great too!!
My third Rom was
I9300XXEMG4_I9300NEEEMG2_NEE ( Nordic Countries) plus I9300ZCEMD2_I9300CHNEMD2_CHN( China), It Mess My IMEI
When i lost my IMEI, y was in Panic!!! Obviously.! so i try to recovery with HC-Ktool, "unlock Samsung S", and nothing, I Use too EFS pro, And nothing, I was so worried, I delete EFS Folder, I Modify with Root Explorer, and Nothing, Even I format the EFS partition with "EFS Pro" ( don't do it if you don't have a backup of your EFS Folder).
I read in other post somebody, carried his phone, to Service, and they put a old rom, and he recovered his IMEI.
So i Flash the last Custom Rom who Works: I9300XXEMF6 and Works again, I recovered my IMEI.
I don't like have doubts, so, I flash Again, I9300XXEMG4, but, only flash the files boot.img, cache.img, system.img, hidden.img, without the china modem ( because the modem is right now in the phone). I LOST MY IMEI AGAIN!.
I just flash: I9300XXEMF6 and i recovered my IMEI.
In conclusión, i think, the newest roms, has diferent structure in the EFS partition, maybe It don't loss the IMEI, only the rom can't see it.
I will try to do with the lastest Spain Rom, if this Works, i will tell you.
Nilist said:
Hi Cpaez, I think your NEE firmware may simply have been too new:
http://forum.xda-developers.com/showthread.php?t=2377731
Apparently the firmwares from July onwards changes the EFS folder format, and I would guess that the problem arises because we are mixing the versions. I will try with a firmware from the same month/series (Bx) as my China Unicom.
Click to expand...
Click to collapse
EXACTLY!!!
I noticed after i had the problem! LOL!!
We have to wait a new China Unicom Firmware, to mix New One.
I comment to You... the last that works is:
I9300XXEMF6_I9300PHEEMF1_PHE + I9300ZCEMD2_I9300CHNEMD2_CHN
Thank you so much for you information, i will not try any more latest roms, until a newest china unicom.
FMBLima said:
Hi, i downloaded the official rom to my device (FACTORY_I9300ZNEMD2_I9300CHUEMD2_CHU), but i this file contains 4 files... BOOTLOADER_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CODE_I9300ZNEMD2_1133994_REV00_user_low_ship.tar, CSC_CHU_I9300CHUEMD2_1133994_REV00_user_low_ship.tar and MODEM_I9300ZNEMA1_862886_REV00_user_low_ship.tar.
how to flash it using odin?
Thanks
Click to expand...
Click to collapse
Hi!, FMB Lima, Are you ever test newest firmwares?, working?, i will try the newes CHN_CHN, i Hope Its Works, i still in the i9300XXEMF6.
Hello, I purchase a SM-G935F from a pawnshop today that was flashed with a custom ROM however it does not boot. The phone goes into download mode just fine and want to flash stock firmware but cannot find the USA version. The box came the phone and appears to be a USA version, the UPC code on the box is 8806088275123 and I check the IMEI on a website service and it came back with this model number SM-G935FZKLTTT and says it was sold in the USA. Any help from members would be greatly appreciated, thank you in advance for your help.
Mark
You can flash any region firmware on the SM-G930F phone, try this one:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/
How to install Samsung Firmware: http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
benjamen50 said:
You can flash any region firmware on the SM-G930F phone, try this one:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/
How to install Samsung Firmware: http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thank you my friend, trying now.
I forgot to tell you that factory reset is required when switching from custom rom to stock rom so make sure you flash the non home CSC file and not the home_csc file.
benjamen50 said:
I forgot to tell you that factory reset is required when switching from custom rom to stock rom so make sure you flash the non home CSC file and not the home_csc file.
Click to expand...
Click to collapse
Thank you for your time but not sure I understand what a home and non home CSC file is? it is in the download?
markh61133 said:
Thank you for your time but not sure I understand what a home and non home CSC file is? it is in the download?
Click to expand...
Click to collapse
Yes, it is in the download. When you download Samsung firmware from Sammobile or Updato website they come in a zipped file. You'll need to extract the zipped folder which will give you multiple files labelled AP, BL, CP, CSC and lastly HOME_CSC.
This is an example of what the files look like when the files are extracted from the downloaded firmware zip file:
http://prntscr.com/k07am0
The non_home csc file is used to tell the phone to wipe the user data on the phone when flashed, the home CSC is used if you don't want to wipe the user data on the phone when flashing firmware.
markh61133 said:
Thank you for your time but not sure I understand what a home and non home CSC file is? it is in the download?
Click to expand...
Click to collapse
Right now the phone will not boot, it shows the title of the phone but then just loops back to a black screen.
benjamen50 said:
Yes, it is in the download. When you download Samsung firmware from Sammobile or Updato website they come in a zipped file. You'll need to extract the zipped folder which will give you multiple files labelled AP, BL, CP, CSC and lastly HOME_CSC.
This is an example of what the files look like when the files are extracted from the downloaded firmware zip file:
http://prntscr.com/k07am0
The non_home csc file is used to tell the phone to wipe the user data on the phone when flashed, the home CSC is used if you don't want to wipe the user data on the phone when flashing firmware.
Click to expand...
Click to collapse
Got it, thank you so much for all your help, I really appreciate it.
benjamen50 said:
Yes, it is in the download. When you download Samsung firmware from Sammobile or Updato website they come in a zipped file. You'll need to extract the zipped folder which will give you multiple files labelled AP, BL, CP, CSC and lastly HOME_CSC.
This is an example of what the files look like when the files are extracted from the downloaded firmware zip file:
http://prntscr.com/k07am0
The non_home csc file is used to tell the phone to wipe the user data on the phone when flashed, the home CSC is used if you don't want to wipe the user data on the phone when flashing firmware.
Click to expand...
Click to collapse
Hello again Benjamen50, it failed on the first try, do I need to check re-partition? or Nand Erase? What about a Pit file? sorry to keep bothering you but I appreciate your help.
Mark
If you are flashing Oreo firmware which is 8.0 you need to use Odin 3.13 or newer as the older Odin software does not support flashing Oreo firmware.
The only buttons you need to click are BL, AP, CP, CSC then start and nothing else.
The default check boxes under options tab will be auto reboot and f reset time. Others should be left untouched and not checked.
You'll need to reboot download mode again which can be done by holding the download mode keys until you get that blue screen again or that it says that something ran into a problem with the blue screen which allows flashing as well.
benjamen50 said:
If you are flashing Oreo firmware which is 8.0 you need to use Odin 3.13 or newer as the older Odin software does not support flashing Oreo firmware.
The only buttons you need to click are BL, AP, CP, CSC then start and nothing else.
The default check boxes under options tab will be auto reboot and f reset time. Others should be left untouched and not checked.
You'll need to reboot download mode again which can be done by holding the download mode keys until you get that blue screen again or that it says that something ran into a problem with the blue screen which allows flashing as well.
Click to expand...
Click to collapse
Thank you my friend, you are the best. I flashed a older version and it worked perfect. I cant thank you enough for all your help and patience!
benjamen50 said:
If you are flashing Oreo firmware which is 8.0 you need to use Odin 3.13 or newer as the older Odin software does not support flashing Oreo firmware.
The only buttons you need to click are BL, AP, CP, CSC then start and nothing else.
The default check boxes under options tab will be auto reboot and f reset time. Others should be left untouched and not checked.
You'll need to reboot download mode again which can be done by holding the download mode keys until you get that blue screen again or that it says that something ran into a problem with the blue screen which allows flashing as well.
Click to expand...
Click to collapse
Hello again, well I thought it worked because I got a PASS in Odin however, when the phone boots, I get a Black screen saying Samsung Galaxy S7 Edge then it goes to a blue screen with the android logo and it says erasing at the bottom for a few seconds then the screen goes black. The phone still goes into download mode however, it will not go into recover mode. Before flashing this I could get into recovery mode but would see a custom page with loading and rebooting options. Am I missing the stock boot loader? So sorry to keep bothering you about this.
Mark
try using octoplus samsung tool if you dont know how look it up on youtube first best of luck to you