I'm using Enpass password manager with my LG G6.
Whenever there are some user/name fields on the screen, enpass shows a notification. Clicking it opens enpass and it automatically suggests the entry related to the app.
My concern is that sometimes it doesn't show entry for that app, but it thinks that it requires u/p to lge.com (as I remember correctly)
Does anyone knows why is it this way?
One option is that the web view control is created by LG and so enpass think's it's that page.
The other is that LG redirects traffic via their proxies.
Please tell me that it's not the latter
Got my LG G6 yesterday and have seen this phenomen too.
Let's see if there's someone who can give an answer to this issue.
Otherwise, I'll try to send this to Enpass devs and see what they mean.
Related
I tried searching thorugh the xda forums for an original HTC Home Plugin thread, but couldn't locate one, so i'll start here and maybe someone can forward me to the right place.
I have contacts in my contact list that just have a Company name, and not a first or last name.
The problem is that these contacts cannot be added to the quick dial area of the HTC Home Plugin, it will allow you to select it, but it doesn't show up, and you are unable to click that entry to dial the number. However, if you go edit that contact and add a first / last name, then it magically shows up on the quick dial.
Does anyone know of a bug fix / workaround for getting contacts with just a company name to show up? (And please don't say add a first / last name, that's obviously a solution, but not a fix.)
Any way to also have the phone number displayed on the screen as well when selecting a contact?
If you have multiple numbers on a contact, it just lists the contact 3 times.
J.D.
put the company name in the name field and then change file as: to the company name and it won't change it to look like a name
Just a little app I've been using that seems worthy to note...This will help you move webpages/messages/phone#s from the large screen/full keyboard of your PC to you g1 for processing in just a few seconds (no typing required for webpages just c/p!
Website from pc - phone:
First you'll need ixMAT Scanner from the market..
Browser to your favorite uber long web address on your pc.
Copy the website's address
Open this page http://qrcode.kaywa.com/ be sure you have 'content type' set to 'URL'
In the are labeled 'URL:' paste the uber long web address then press 'generate'
Open ixMAT Scanner, and focus it on the QR Code image that was produced
if all goes well you should now have a link in ixMAT that your can open in the g1's browser..
Phone # from pc -> phone:
Also you can use the same website and ixMAT to add phone numbers to your contacts.
Choose "phone number" under content and follow the same procedure as before.
BEWARE tho, trying to use the 'dial number' feature in ixMAT always causes a force close on my phone.
SMS from pc -> phone:
Another cool feature of the combo is the ability to write an SMS on the your pc.
Choose 'SMS' under content, then fill in the appropriate info # + msg then hit generate.
Scan with ixMAT and after a few seconds your should get 'send sms' 'send mms' options.
Click ''send sms' (or 'send mms' if you want to attach pics etc.) and the info is set up ready for you to hit send or w/e in your messenger
hope this is helpful, it's easier the 2nd time..lol
wow, that actually works a hell of alot better than i thought it would.
quicker than typing out the url thats for sure!
cheers for this
lol cool avatar, you stole 2 seconds of my life!
glad ya like it the email and sms features are useful as well
you can also copy+paste this into the title bar of your browser and have it auto-generate the image for you
Code:
javascript:void(window.location="http://qrcode.kaywa.com/img.php?s=8&d="+window.location)
ahh, cool. I also found this firefox add-on https://addons.mozilla.org/en-US/firefox/addon/8613 that installs to the status bar, just click and it creates a code for the page your viewing. downside is it seems to redirect you through another site first..
The other signed QR generator 'Mobile something' add-on doens't seem to work for me atm :/
If i put a telephone number and then i scan it with G1 there a way to add the number on the contact list?. i can only open thw webbrowser.
If i put a telephone number and then i scan it with G1 there a way to add the number on the contact list?. i can only open thw webbrowser.
Ya, you have to change the 'content type' to "phone number" on the QR Code generator site. what i get from a phone number such as ########## is 'dial number', or 'add contact'
no this is not true it doesn't work for me
Works great. Thanks for the good idea.
this rocks!! by the way, right back atcha as far as your avatar is concerned
mastercut, ok.. seems there's some issues with the updated ixMAT it no longer dials numbers (force closes), it's still works good for adding to contacts tho... oh well, bummer lol
Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all
EDIT: Just saw another thread on the issue, sorry for the double post.
My work has a seperate AP for signing personal devices. It is an open network but requires signin after connecting. The kindle fire pops up a message says "this network requires signin, would you like to do that now?"
That is where the problem starts, continuing simply brings up a white page with the words "Log in" and below that a button "Close" The actual login prompt never appears.
The white area looks kind of like a pdf app is taking over, it has the little zoom controls at the bottom.
Hey all its been a while since I posted here, I know a few are having this issue.
-when receiving a call from some one that's is in your address book, it only displays a phone number . No name or picture.
What's iv tried, resetting phone, adding a few contacts to my sim, tried adding contacts from my goolgle account directly to my phone address book.
I was on the ZTE site where the same question has arised but no fix as of yet. Was wondering if someone on here had cracked this problem.
Thanks in advance! :good:
https://community.zteusa.com/thread/13209
Someone put up a youtube fix for that on the same thread you linked. Seems like it solve that problem.
Honestly this zmaxpro is good on the outside but rotten in the inside, seriously. Too many bugs. I don;t know if it is the phone build or the new verity security google or android put on. It's nuts. How can you really put a proper security on something that started as OPEN source?!
Nutty.
Try this video that someone made. I tried it and it worked for me. https://youtu.be/W6xFNNW8PxM
Sent from my Z981 using Tapatalk
Easier fix
I found a much easier fix. Go to the permissions on T-Mobile Nam ID and turn contacts on. That did the trick for me.
solved zte z981 caller ID not displaying
thank u for sharing. I was able to fix my caller ID not displaying
regards, snoma01
zte max pro solution to how to display incoming caller ID
Allswang said:
I found a much easier fix. Go to the permissions on T-Mobile Nam ID and turn contacts on. That did the trick for me.
Click to expand...
Click to collapse
Yes, that worked for me also. Since I have yet to attain the status of being able to post outside link, there is a simple method by Hiii People on youtube.
Here's a little tip for those who are using this phone with a non-Tmobile sim, in which case the Tmobile CallerID app doesn't function right, and causes the names not to show up on incoming calls. If it's a MetroPCS used with a non-MetroPCS sim, you may need to substitute the Tmobile NameID app with MetroPCS NameID. I know this is easy stuff, but some people get confused , so here are two workarounds:
1. When the NameID app gets stuck loading, press the Recents button, hold down the top left corner of the app card, then press the top right.
Finally go to permissions and select the Contacts to be On.
2. Simply go to Settings > Apps, scroll down to the Tmobile NameID app, and from there just like above go to permissions and select the Contacts to be On.