USERDATA_ATT_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CSC_OYN_G955UOYN1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CP_G955USQS1AQG1_CP6877814_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
BL_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
AP_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT_meta.md5
Download here : G955USQS1AQG1 - Status : Live
norbarb said:
USERDATA_ATT_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CSC_OYN_G955UOYN1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CP_G955USQS1AQG1_CP6877814_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
BL_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
AP_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT_meta.md5
Download here : G955USQS1AQG1 - Status : Live
Click to expand...
Click to collapse
Use ODIN 3.12.5 there is extra box for userdata_att.
On Edge of Galaxy
norbarb said:
Use ODIN 3.12.5 there is extra box for userdata_att.
On Edge of Galaxy
Click to expand...
Click to collapse
Where is CSC Home
Muffycheeks said:
Where is CSC Home
Click to expand...
Click to collapse
There is not on servers with this build. Only I can get with original firmware C9.
On Edge of Galaxy
Thanks! I've been looking for this.
---------- Post added at 03:28 AM ---------- Previous post was at 02:47 AM ----------
norbarb said:
USERDATA_ATT_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CSC_OYN_G955UOYN1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CP_G955USQS1AQG1_CP6877814_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
BL_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
AP_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT_meta.md5
Download here : G955USQS1AQG1 - Status : Live
Click to expand...
Click to collapse
I download the files and everytime I try to load thme up on Odin they don't appear.
norbarb said:
USERDATA_ATT_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CSC_OYN_G955UOYN1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
CP_G955USQS1AQG1_CP6877814_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
BL_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT.md5
AP_G955USQS1AQG1_CL11449429_QB14123826_REV00_user_low_ship_MULTI_CERT_meta.md5
Download here : G955USQS1AQG1 - Status : Live
Click to expand...
Click to collapse
just to be clear..
First download the ZIP file from google drive, then once download extract the file which gives us individual zip files and then extract each one of those until we get the .md5 files correct ?
EDIT: did that and started to apply all files to ODIN now. hopefully everything flashes correctly.
---------- Post added at 08:32 PM ---------- Previous post was at 07:52 PM ----------
swoods04 said:
Thanks! I've been looking for this.
---------- Post added at 03:28 AM ---------- Previous post was at 02:47 AM ----------
I download the files and everytime I try to load thme up on Odin they don't appear.
Click to expand...
Click to collapse
Ma$etas said:
First download the ZIP file from google drive, then once download extract the file which gives us individual zip files and then extract each one of those until we get the .md5 files
Click to expand...
Click to collapse
Follow my above quoted post and then odin will recognize the files since after you extract the downloaded files each individual file is still a .rar file (zip). After you extract them you will find the .md5 file which odin recognizes.
---------- Post added at 08:36 PM ---------- Previous post was at 08:32 PM ----------
@norbarb I flashed this through odin and the phone is still stuck on Verizon. I have Verizon boot up and Verizon apps etc..
Funny thing is now I have a "AT&T Smart Wi-Fi app".
Baseband shows AQG1
Build number shows AQG1
Android security patch level July 1, 2017
I guess I will have to be stuck on the Verizon stuff..
Thanks though for trying though in helping making this phone from Verizon to AT&T.
Ma$etas said:
just to be clear..
First download the ZIP file from google drive, then once download extract the file which gives us individual zip files and then extract each one of those until we get the .md5 files correct ?
EDIT: did that and started to apply all files to ODIN now. hopefully everything flashes correctly.
---------- Post added at 08:32 PM ---------- Previous post was at 07:52 PM ----------
Follow my above quoted post and then odin will recognize the files since after you extract the downloaded files each individual file is still a .rar file (zip). After you extract them you will find the .md5 file which odin recognizes.
---------- Post added at 08:36 PM ---------- Previous post was at 08:32 PM ----------
@norbarb I flashed this through odin and the phone is still stuck on Verizon. I have Verizon boot up and Verizon apps etc..
Funny thing is now I have a "AT&T Smart Wi-Fi app".
Baseband shows AQG1
Build number shows AQG1
Android security patch level July 1, 2017
I guess I will have to be stuck on the Verizon stuff..
Thanks though for trying though in helping making this phone from Verizon to AT&T.
Click to expand...
Click to collapse
Did you flash USERDATA too?
norbarb said:
Did you flash USERDATA too?
Click to expand...
Click to collapse
yes.
Ma$etas said:
yes.
Click to expand...
Click to collapse
This is very interesting. It should change to at&t
On Edge of Galaxy
norbarb said:
This is very interesting. It should change to at&t
On Edge of Galaxy
Click to expand...
Click to collapse
Wouldn't you have to flash "Home CSC" first if coming from a different service provider in order to force a change? Also what update does their phone have, you can't down grade?
norbarb said:
This is very interesting. It should change to at&t
On Edge of Galaxy
Click to expand...
Click to collapse
yup and now i cant send any picture messages.
I have already changed the setting to LTE/GSM/
Muffycheeks said:
Wouldn't you have to flash "Home CSC" first if coming from a different service provider in order to force a change? Also what update does their phone have, you can't down grade?
Click to expand...
Click to collapse
I believe i tried HOme_CSC file already as well. I will double check but I believe i tried it on the previous firmware version
---------- Post added at 03:37 PM ---------- Previous post was at 03:33 PM ----------
@norbarb . I load all the files on odin and then hit start. I am not changing any settings in ODIN
Yes but what is the last 3 letters of your build (firmware) on the phone. It will need to match or be a earlier build otherwise the boot-loader will not allow it to load.
Muffycheeks said:
Yes but what is the last 3 letters of your build (firmware) on the phone. It will need to match or be a earlier build otherwise the boot-loader will not allow it to load.
Click to expand...
Click to collapse
It will. You can load any earlier firmware. Bootloader is not change yet. On all G955U is version 1. So you can even flash C9 firmware and phone will allowed.
G955USQS1AQG1 in Samsung firmware bootloader is fifth number from end.
On Edge of Galaxy.
Ma$etas said:
yup and now i cant send any picture messages.
I have already changed the setting to LTE/GSM/
I believe i tried HOme_CSC file already as well. I will double check but I believe i tried it on the previous firmware version
---------- Post added at 03:37 PM ---------- Previous post was at 03:33 PM ----------
@norbarb . I load all the files on odin and then hit start. I am not changing any settings in ODIN
Click to expand...
Click to collapse
You are correct. Do not change any default settings.
On Edge of Galaxy
Maybe try the C-9 first then upgrade higher.
Muffycheeks said:
Maybe try the C-9 first then upgrade higher.
Click to expand...
Click to collapse
I told you did already.. Yes you should if you did not.
On Edge of Galaxy
Muffycheeks said:
Yes but what is the last 3 letters of your build (firmware) on the phone. It will need to match or be a earlier build otherwise the boot-loader will not allow it to load.
Click to expand...
Click to collapse
Baseband : G955USQS1AQG1 Build Number: NRD90M.G955USQS1AQG1
Muffycheeks said:
Maybe try the C-9 first then upgrade higher.
Click to expand...
Click to collapse
norbarb said:
I told you did already.. Yes you should if you did not.
On Edge of Galaxy
Click to expand...
Click to collapse
If i already have the latest version of firmware will the phone accept an older version (downgrade) ?
edit : found C9... I am going to try C9 firmware this weekend hopefully that helps.
Right now i cant figure out how to make my MMS to work .
update: I tried C9
1st: i tried the Home CSC file and ODIN stated it pass but the phone said otherwise. I failed to boot up at first then it said error in recovery
Then it booted up but kept giving all types of FC's. Mean while the verizon bootup and apps where still there.
2nd: I tried CSC file and everything booted and is working fine. Data works and my download speed is so so but my upload speeds is double the speed of download. LOL
MMS works. Still have all the Verizon crap. phone somehow seems snappier than on AQG1 firmware.
Im debating on just installing original verizon firmware or keeping this version of the AT&T firmware. If it works then why try to fix it.
thanks for the help either way.
Do it again but this time flash the "Home CSC" first and then all the others including regular CSC files. Flash right on top of what you have now.
You mean flash all files again but home CSC first then reflash again and use regular CSC file ?
Also you are saying reflash the C9 firmware right ?
Related
You can dowload the NK4 baseband and bootloader here and flash them thru odin
On IB4STiD's thread found here: http://forum.xda-developers.com/showpost.php?p=56276338&postcount=5
Some credit to @iB4STiD
---------- Post added at 02:45 AM ---------- Previous post was at 02:44 AM ----------
Here are some instructions:
Preface:
You just want the baseband file.
---------- Post added at 02:59 AM ---------- Previous post was at 02:45 AM ----------
1. Download the NK4 baseband file.
2. Open up odin and uncheck auto reboot.
3. Click on phone, select the baseband file, and press start.
4. When you finish the flash. Pull the battery and put it back in and power up.
---------- Post added at 03:07 AM ---------- Previous post was at 02:59 AM ----------
PS.
I had to use odin v.3.04.
The v.3.07 I used for all my Chainfire and team win fun didn't let me.
---------------
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
Results on v4 firekat:
On Infamous:
Someone got bored xD
My guess is that you can leave auto reboot checked and skip the battery pull.
Will this flash modem as well
Sent using my T-Mobile Note 4
Ten words
ezsoulja said:
Will this flash modem as well
Sent using my T-Mobile Note 4
Click to expand...
Click to collapse
That's what it will flash. Baseband=modem
Android_Monsters said:
That's what it will flash. Baseband=modem
Click to expand...
Click to collapse
Heh I'm stuck calling it modem instead of baseband lol..
Sent using my T-Mobile Note 4
Any improvements in this one? Is it worth flashing?
wait i'm confuse between this ,kies method, 138 MB tmobile OTA (i'm rooted so no go ) update and the 1.6GB firmware on sammobile . I'm running rooted ANJ7 baseband version so which path should i take to upgrade ? which of these do i get to keep my data and phone setting ?
If you flash the smaller file OP posted you will not lose your files. If you flash the full 1.6 GB version, it will essentially put your phone back to stock, wiping all your data in the process. Which is good if you want a clean start, but not so much if you only want to update your baseband and modem (and firmware). Personally, I flash the full 1.6 version for a clean start when an update is released, then restore my apps with Titanium backup. But it's up to you, honestly.
Flashed using Mobile Odin.
Sent from my SM-N910T using Tapatalk
Android_Monsters said:
You can dowload the NK4 baseband and bootloader here and flash them thru odin
https://www.androidfilehost.com/?w=files&flid=21749
---------- Post added at 02:45 AM ---------- Previous post was at 02:44 AM ----------
Here are some instructions:
Preface:
You just want the baseband file.
---------- Post added at 02:59 AM ---------- Previous post was at 02:45 AM ----------
1. Download the NK4 baseband file.
2. Open up odin and uncheck auto reboot.
3. Click on phone, select the baseband file, and press start.
4. When you finish the flash. Pull the battery and put it back in and power up.
---------- Post added at 03:07 AM ---------- Previous post was at 02:59 AM ----------
PS.
I had to use odin v.3.04.
The v.3.07 I used for all my Chainfire and team win fun didn't let me.
---------------
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
Click to expand...
Click to collapse
I was able to flash my baseband/modem from my extracted firmware, modem.bin using Odin v3.09,
and
ur bootloader also using Odin v3.09,
just wanted to let u know it worked just fine,
thanks for the bootloader file... saved me some time instead of doing the firmware... :good:
Very cool.
I may go ahead and flash the bootloader.
Hadn't yet cause on the tmobile s4 it was important to never update the bootloader.
Mine still doesn't have knox.
Running latest cm nightlies.
And using the nh7 modem.
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
And the op's trick is how you get the latest modem/baseband without letting them do things to your bootloader.
kabuk1 said:
Any improvements in this one? Is it worth flashing?
Click to expand...
Click to collapse
I always update my modem/baseband.
Samsung/tmobile are trying to make reception better with each release, and all.
I've also heard people say if it ain't broke don't fix it.
Knowing how to update your modem/baseband without updating your bootloader is a good skill either way.
Android_Monsters said:
I always update my modem/baseband.
Samsung/tmobile are trying to make reception better with each release, and all.
I've also heard people say if it ain't broke don't fix it.
Knowing how to update your modem/baseband without updating your bootloader is a good skill either way.
Click to expand...
Click to collapse
on odin 3.09 there's F, reset time option and i can't find the Phone option, i see BL, AP, CP,CSC and UMS only
Download odin v3.04.
here is a link to odin v3.04 :
http://forum.xda-developers.com/galaxy-s2/general/odin-v3-04-t1703998
hm i wonder if this is a display bug ?
Hi, i am looking for a stock firmware for my tab 4, and i can't seem to find the right one. Can anyone share a link for a stock firmware file for my tablet?
Here is my tab info:
Build number: T230NUUEUOANK2
Region code: XAR
Android version: 4.4.2
Thanks for any responses.
+1....Mine has been bricked for some time now
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
Try Samfirmware.com
How about looking here.. http://forum.xda-developers.com/showthread.php?p=58428539
DUHAsianSKILLZ said:
How about looking here.. http://forum.xda-developers.com/showthread.php?p=58428539
Click to expand...
Click to collapse
Sadly my build number isn't listed here I've tried downloading my firmware from here http://forum.xda-developers.com/tab-4/general/link-original-firmware-images-tab-4-7-t2978495 but rapidgator fails to download, and uploaded needs a premium account to download a firmware of that size.
jxcorex28 said:
+1....Mine has been bricked for some time now
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
Try Samfirmware.com
Click to expand...
Click to collapse
Have you tried using a USB jig and flashing your firmware with ODIN? look here: http://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/ USB jigs can be found for only a dollar, google it and find the prices if you don't want to make your own.
_Cristian_ said:
Sadly my build number isn't listed here I've tried downloading my firmware from here http://forum.xda-developers.com/tab-4/general/link-original-firmware-images-tab-4-7-t2978495 but rapidgator fails to download, and uploaded needs a premium account to download a firmware of that size.
Click to expand...
Click to collapse
Is there any reason you need NK2 in particular? My thread has NE2 and OC1 listed, I know at least OC1 is a newer build, so if anything, you'd be updating/upgrading your firmware. It's the same model number and region, so there wouldn't be any reason for it to malfunction...
thisisapoorusernamechoice said:
Is there any reason you need NK2 in particular? My thread has NE2 and OC1 listed, I know at least OC1 is a newer build, so if anything, you'd be updating/upgrading your firmware. It's the same model number and region, so there wouldn't be any reason for it to malfunction...
Click to expand...
Click to collapse
I checked with kies the other day and i saw OC1 was the new firmware, i'll check that one out. Thanks. :good:
I thought about JTAG'ing the device, but I dont have a soldering gun.....I called samsung, and they are going to repair it because of still being under warranty.
jxcorex28 said:
I thought about JTAG'ing the device, but I dont have a soldering gun.....I called samsung, and they are going to repair it because of still being under warranty.
Click to expand...
Click to collapse
Sounds good. :good:
Official Stock Rom For Samsung Galaxy J7(2015) with WiFi-Calling Feature!
#Disclmar
Its official update for Galaxy J7(2015).
After installing this update your phone will be unrooted.
This update is for india only, if you are from other country with same model and if try to flash this update and anything happens then i am not responsible
#Supported DevicesGalaxy J700F or SM-J700F model only.
#Prerequests for installing this update1. Samsung Galaxy J7 F model.
2. Latest Odin.
3. The Update file in your Laptop/PC.
How To Install The Update
1. Download Odin, The update zip in your Laptop/PC and extract them.
2. Turn off your phone, Go to download mode (by pressing Volume down+home+power buttons at the same time).
3. Press the Volume up button to continue.
4. Open Odin and select AP, browse through the files and select the extracted file(if says odin is not responding then wait for sometime, it will response).
5. Now connect your phone and hit the Start button.
6. Now your phone is updated(First boot up will take some time).
If some users can't detect their device then download samsung usb drives from download section.
Important Note: First take backup of all your files and keep it in some safe place.
#Downloads
Update file or Firmware link[Google Drive]: Click Here
Update File or Frimware link[Sammobile]: Click Here
Odin v3.11.1: Click Here
SAMSUNG USB Driver for Mobile Phones: Click Here
Note: I have uploaded all the files in Google Drive for maximum download speed.
HIT THE THANKS BUTTON IF I HELPED YOU
Thanks bro
Give us some customs roms
But how to use it?
Sent from my SM-J700F using Tapatalk
what is use of it ? currently i am on moluntic's A7 custom rom..
devilav said:
Thanks bro
Give us some customs roms
Click to expand...
Click to collapse
Bro i am not a dev and don't ask this question frequently as devs are doing their job. Let them do their job in their comfortable way
yogisaw said:
But how to use it?
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
It takes upto 24hrs to activate. For your help i am giving you YouTube link for your help.
harshil33 said:
what is use of it ? currently i am on moluntic's A7 custom rom..
Click to expand...
Click to collapse
It is like VoLTE. With help of this feature you can call over Wi-Fi just like volte.
Here are some youtuble links for you
What is WiFi call? All you need to know about.
How to setup WiFi calling.
Is it running marshmallow?
Sent from my SM-J700F using Tapatalk
---------- Post added at 03:43 AM ---------- Previous post was at 03:12 AM ----------
What is this file
0B-RdKfSi4Y8nV1JkekU3bldOYkE.bin
Sent from my SM-J700F using Tapatalk
sulasno said:
Is it running marshmallow?
Sent from my SM-J700F using Tapatalk
---------- Post added at 03:43 AM ---------- Previous post was at 03:12 AM ----------
What is this file
0B-RdKfSi4Y8nV1JkekU3bldOYkE.bin
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
Yes it is running marshmallow.
---------------------------------------------------
Which file are you talkong about?
Send its screenshot.
This is the file from Google drive
sulasno said:
This is the file from Google drive
Click to expand...
Click to collapse
I can't find it.
Can you send me its link?
I used the link from op but ended up downloading from Sam mobile
Sent from my SM-J700F using Tapatalk
sulasno said:
I used the link from op but ended up downloading from Sam mobile
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
Google drive link is already there. Its the first one, second one is sammobile link.
This the google drive link:
google drive link
Nice Work bro
---------- Post added at 11:31 AM ---------- Previous post was at 11:30 AM ----------
When is the flashable zip is going to release?
---------- Post added at 11:32 AM ---------- Previous post was at 11:31 AM ----------
When is the flashable apps zip going to release?
---------- Post added at 11:32 AM ---------- Previous post was at 11:32 AM ----------
How does WiFi Caling works?
---------- Post added at 11:39 AM ---------- Previous post was at 11:32 AM ----------
Harvey_Spectar said:
Official Stock Rom For Samsung Galaxy J7(2015) with WiFi-Calling Feature!
#Disclmar
Its official update for Galaxy J7(2015).
After installing this update your phone will be unrooted.
This update is for india only, if you are from other country with same model and if try to flash this update and anything happens then i am not responsible
#Supported DevicesGalaxy J700F or SM-J700F model only.
#Prerequests for installing this update1. Samsung Galaxy J7 F model.
2. Latest Odin.
3. The Update file in your Laptop/PC.
How To Install The Update
1. Download Odin, The update zip in your Laptop/PC and extract them.
2. Turn off your phone, Go to download mode (by pressing Volume down+home+power buttons at the same time).
3. Press the Volume up button to continue.
4. Open Odin and select AP, browse through the files and select the extracted file(if says odin is not responding then wait for sometime, it will response).
5. Now connect your phone and hit the Start button.
6. Now your phone is updated(First boot up will take some time).
If some users can't detect their device then download samsung usb drives from download section.
Important Note: First take backup of all your files and keep it in some safe place.
#Downloads
Update file or Firmware link[Google Drive]: Click Here
Update File or Frimware link[Sammobile]: Click Here
Odin v3.11.1: Click Here
SAMSUNG USB Driver for Mobile Phones: Click Here
Note: I have uploaded all the files in Google Drive for maximum download speed.
HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
Any future project coming from you?
ShreeshSingh said:
Nice Work bro
---------- Post added at 11:31 AM ---------- Previous post was at 11:30 AM ----------
When is the flashable zip is going to release?
---------- Post added at 11:32 AM ---------- Previous post was at 11:31 AM ----------
When is the flashable apps zip going to release?
---------- Post added at 11:32 AM ---------- Previous post was at 11:32 AM ----------
How does WiFi Caling works?
---------- Post added at 11:39 AM ---------- Previous post was at 11:32 AM ----------
Any future project coming from you?
Click to expand...
Click to collapse
Thanks bro
New project coming soon
I have successfully flashed the stock rom . I need to root now what should i do ? I tried installing twrp recovery it showed Recovery is not seandroid enforcing and installing Super-su leads to boot loop.
spawnhawk said:
I have successfully flashed the stock rom . I need to root now what should i do ? I tried installing twrp recovery it showed Recovery is not seandroid enforcing and installing Super-su leads to boot loop.
Click to expand...
Click to collapse
After installing twrp it will always show that recovery is not seanroid enforcing.
Use supersu from the thread sharvinzlife named installing twrp, root and xposed.
@Harvey_Spectar Pravin.. from where to get only update file to flash..? OTA sucks!
saddam.khan999 said:
@Harvey_Spectar Pravin.. from where to get only update file to flash..? OTA sucks!
Click to expand...
Click to collapse
Sammobile
Updato
I personally prefer updato
so hello there,
I have a S8 G950W and i need to bypass FRP but can it work with G950U combination file and then after that the Stock G950W file or i can use the G950U stock file?
Thanks to all that gonna answer me
Edit: nvm i got it.
chatregla said:
so hello there,
I have a S8 G950W and i need to bypass FRP but can it work with G950U combination file and then after that the Stock G950W file or i can use the G950U stock file?
Thanks to all that gonna answer me
Edit: nvm i got it.
Click to expand...
Click to collapse
Hey Chatregla!
I'm in the exact same situation as you were here with my SM-G950W, so did you installed a 950U combination and firmware?
Thank you very much!
hello
chatregla said:
so hello there,
I have a S8 G950W and i need to bypass FRP but can it work with G950U combination file and then after that the Stock G950W file or i can use the G950U stock file?
Thanks to all that gonna answer me
Edit: nvm i got it.
Click to expand...
Click to collapse
what did you get
I have same problem as you and don't know what to use
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
---------- Post added at 06:59 PM ---------- Previous post was at 06:59 PM ----------
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
ionescualex said:
what did you get
I have same problem as you and don't know what to use
Click to expand...
Click to collapse
Hey, yeah i did use the combination and then i installed the stock G950W file.
hello
chatregla said:
Hey, yeah i did use the combination and then i installed the stock G950W file.
Click to expand...
Click to collapse
you mind explaining what you did?
so you used the combination file g950u with odin, then flashed firmware g950w?
could you please be more specific how you did that, for people with same issue like me, and never did it before?
thank you
ionescualex said:
you mind explaining what you did?
so you used the combination file g950u with odin, then flashed firmware g950w?
could you please be more specific how you did that, for people with same issue like me, and never did it before?
thank you
Click to expand...
Click to collapse
Yeah exactly like that haha
ok
chatregla said:
Yeah exactly like that haha
Click to expand...
Click to collapse
I never used odin or any of that stuff
I don't know what to do, what files to use and everything, what settings
is it too complicated for you to give more details
ionescualex said:
I never used odin or any of that stuff
I don't know what to do, what files to use and everything, what settings
is it too complicated for you to give more details
Click to expand...
Click to collapse
I'm sorry, not in my house at the moment but I can tell you one thing, watch a youtube video.
Joshua Mr PC Repair said:
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
---------- Post added at 06:59 PM ---------- Previous post was at 06:59 PM ----------
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
Click to expand...
Click to collapse
I am in Vancouver as well. I need the G950W combo file, or, if you have it and more importantly, do the flashing work needed can you help me for a reas. price?
\Thx.
chatregla said:
I'm sorry, not in my house at the moment but I can tell you one thing, watch a youtube video.
Click to expand...
Click to collapse
so you used the G950U combination file and the Stock G950W file
and everything works fine and don't have any issues, bro?
---------- Post added at 10:55 PM ---------- Previous post was at 10:17 PM ----------
Joshua Mr PC Repair said:
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
---------- Post added at 06:59 PM ---------- Previous post was at 06:59 PM ----------
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
Click to expand...
Click to collapse
so you used the combo file and firmware of 950u on your 950w and had no problems?
the link is broken
ionescualex said:
so you used the G950U combination file and the Stock G950W file
and everything works fine and don't have any issues, bro?
---------- Post added at 10:55 PM ---------- Previous post was at 10:17 PM ----------
so you used the combo file and firmware of 950u on your 950w and had no problems?
the link is broken
Click to expand...
Click to collapse
Download this to computer:
https://drive.google.com/open?id=1ua...fse-L5RKFYkh7Z
Use regular Odin and load just the BL, AP and CP of the BQL1 files if you want to try dirty flashing.
youll be on the latest BQL1 and then youll be a 950U
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
G950W said:
I am in Vancouver as well. I need the G950W combo file, or, if you have it and more importantly, do the flashing work needed can you help me for a reas. price?
\Thx.
Click to expand...
Click to collapse
Download this to computer:
https://drive.google.com/open?id=1ua...fse-L5RKFYkh7Z
Use regular Odin and load just the BL, AP and CP of the BQL1 files if you want to try dirty flashing.
Joshua Mr PC Repair said:
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
---------- Post added at 06:59 PM ---------- Previous post was at 06:59 PM ----------
I'm using 950w and converted it to 950u for beta 8.0 have had no problems ,
http://https://forum.xda-developers.com/showthread.php?p=75106929#post75106929
Click to expand...
Click to collapse
my problem is that I have a g950w and there is no combination file for that
I tried with the g950u combo file but so far it didn't work in odin
I followed the steps from this vid on youtube
https://www.youtube.com/watch?v=9qcBBQ4rwis&list=LLSNQkcO6M3sNXEwHIWXkEoA&index=20&t=311s
I don't know how you converted your 950w to 950u
I tried with the 950u combo file in odin but doesn't work
after I press start, says "All threads completed. (succeed 0 / failed 1)"
*nevermind, it worked after few tries, now it's the firmware that doesn't work
ok, then I tried a 950u firmware, it worked in odin, but then it said that device storage is corrupt
and had to reset
can someone help
Help me please
hi, even my phone is a SM-G905W and I did not find the combination file! you can help me
It can be done by GSM tool without any problem i did it many times b4
Help me
instrumentaly said:
It can be done by GSM tool without any problem i did it many times b4
Click to expand...
Click to collapse
I'm ignorant on the subject You could explain with a few steps how to do this
nokrato said:
I'm ignorant on the subject You could explain with a few steps how to do this
Click to expand...
Click to collapse
By Octoplus FRP Tool Just connect your device and it bypass FRP
instrumentaly said:
By Octoplus FRP Tool Just connect your device and it bypass FRP
Click to expand...
Click to collapse
I do not own this program
Joshua Mr PC Repair said:
Download this to computer:
https://drive.google.com/open?id=1ua...fse-L5RKFYkh7Z
Use regular Odin and load just the BL, AP and CP of the BQL1 files if you want to try dirty flashing.
youll be on the latest BQL1 and then youll be a 950U
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
Download this to computer:
https://drive.google.com/open?id=1ua...fse-L5RKFYkh7Z
Use regular Odin and load just the BL, AP and CP of the BQL1 files if you want to try dirty flashing.
Click to expand...
Click to collapse
hi, you can help me
the drive link doesnt work anymore
plz help a fellow vancouverite here
I want to get as close as possible to stock firmware. Literally as if I bought it.
I have the following files:
AP_G950FXXU1AQK7_CL12502673_QB15780950_REV00_user_low_ship_meta.tar.md5
BL_G950FXXU1AQK7_CL12502673_QB15780950_REV00_user_low_ship.tar.md5
CP_G950FXXU1AQK7_CP8112554_CL12502673_QB15780950_REV00_user_low_ship.tar.md5
CSC_3IE_G950F3IE1AQK7_CL12575984_QB15775647_REV00_user_low_ship.tar.md5
HOME_CSC_3IE_G950F3IE1AQK7_CL12575984_QB15775647_REV00_user_low_ship.tar.md5
Im specifically confused on the difference between CSC and HOME_CSC, both same filesize.
Do I just open Odin, add in all the first 4 files into there appropriate buttons, and let it rip? Whats the last one for?
Place them in their respective tabs ok AP BL CP and use CSC not home csc.
osama bhatti0 said:
Place them in their respective tabs ok AP BL CP and use CSC not home csc.
Click to expand...
Click to collapse
Whats the difference, CSC and HomeCSC
Wait why are you flashi g these old firmwares when there is new oreo build on sammobile. Download it germany DBT region use odin 3.13.1 and boom you have oreo.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
imPRAGMA said:
Whats the difference, CSC and HomeCSC
Click to expand...
Click to collapse
Bro home csc is when you dont want your data to be wiped out and csc wipes data always start fresh ok. Use csc.
osama bhatti0 said:
Wait why are you flashi g these old firmwares when there is new oreo build on sammobile. Download it germany DBT region use odin 3.13.1 and boom you have oreo.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Bro home csc is when you dont want your data to be wiped out and csc wipes data always start fresh ok. Use csc.
Click to expand...
Click to collapse
Cause it aint english right? also its not final? or is it?
https://updato.com/firmware-archive-select-model?record=015089C919D311E89F15FA163EE8F90B
There you go download it and ONLY use ODIN 3.13.1 place files in respective tabs and use CSC.
osama bhatti0 said:
https://updato.com/firmware-archive-select-model?record=015089C919D311E89F15FA163EE8F90B
There you go download it and ONLY use ODIN 3.13.1 place files in respective tabs and use CSC.
Click to expand...
Click to collapse
Is it in english or only German?
imPRAGMA said:
Is it in english or only German?
Click to expand...
Click to collapse
It is english bro.
how can i download those files respectively guys