Database Users

V510 4.4.4 .tot

*****DISCLAIMER*****DISCLAIMER*****DISCLAIMER*****
If you brick your device it's a whole lot of NOT MY PROBLEM
*****DISCLAIMER*****DISCLAIMER*****DISCLAIMER*****
With that out of the way enjoy
1) Download this
https://www.androidfilehost.com/?fid=95747613655047389
2) unzip: V510_4.4.4+tools.zip
3) Install the LG drivers
4) Install LGFlashTools v1.8 (but don't run it)
5) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer
6) Launch LG Flash Tool
You might see a window with Korean language, just click on OK
Check the Select Manual Mode on the top
7) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
8) Click the DLL box and choose LHV510_SVC_LGFLASHv160.dll
9) Click the S/W box and select the firmware file with .tot extension
10) Now click the Yellow arrow button on the top left of the main window
11) Boot your V510 into Download Mode. To do this power V510 completely off. Then hold Volume Up + Volume Down + plug in USB to PC (in that order)
The firmware installation will be triggered
Ignore if you see any temporary error and just wait patiently till it is finished.
I took these instructions from another post. That post ended by giving "Credit [email protected] for making a cleaner guide for the TOT Method"

It's a shame the v500 can't be converted

n0credit said:
It's a shame the v500 can't be converted
Click to expand...
Click to collapse
This might help: http://goo.gl/rPx8KK

+1 worked perfectly for me.
The only part that I had a little trouble with was changing the COM port to 41.
Windows users: you must be booted into Download Mode for the tablet to show up in Device Manager, where you change the COM port. I was trying to change the port while the tablet was booted up (normally) and it was driving me crazy.

Need some help:
tl;dr: Pretty sure I still need to flash the stock recovery, but having problems.
Coming from a rooted LG GPad GPE with TWRP installed. I followed the instructions on this thread and everything seems to have worked. I'm now unrooted, but I'm still getting "your system is up to date" when I check for an update in settings.
I think I do not have the right recovery installed, and that is why I am not getting the update. When I try to boot into recovery mode, I get the android guy on his back with a red triangle. No signs of TWRP being installed anymore.
I've tried several times to flash the stock recovery as listed in this thread: http://forum.xda-developers.com/showthread.php?t=2574639. It seems to work, but I don't think it is working properly. I also can't sideload the 5.0 file through ADB, since I need to put the device into recovery mode to do it.
---------- Post added at 02:24 PM ---------- Previous post was at 01:46 PM ----------
Nevermind. Turns out that is the stock recovery. Now my problem is I can't push the file over ADB. The ADB connection doesn't persist into recovery mode. I've followed the steps here: http://forum.xda-developers.com/showthread.php?t=2575783.
When the device is on normally, the ADB connection is fine. It shows up in the list of connected devices. When I reboot into recovery and choose "apply update from ADB" and then enter "adb devices" I get no devices connected.
In device manager, I see "LG-V510" under "other devices" but when I try to manually update the drivers to the google drivers as indicated in the post above, the computer says "Windows could not find driver software for your device."
Still need help...

mcaurilio said:
Need some help:
tl;dr: Pretty sure I still need to flash the stock recovery, but having problems.
Coming from a rooted LG GPad GPE with TWRP installed. I followed the instructions on this thread and everything seems to have worked. I'm now unrooted, but I'm still getting "your system is up to date" when I check for an update in settings.
I think I do not have the right recovery installed, and that is why I am not getting the update. When I try to boot into recovery mode, I get the android guy on his back with a red triangle. No signs of TWRP being installed anymore.
I've tried several times to flash the stock recovery as listed in this thread: http://forum.xda-developers.com/showthread.php?t=2574639. It seems to work, but I don't think it is working properly. I also can't sideload the 5.0 file through ADB, since I need to put the device into recovery mode to do it.
---------- Post added at 02:24 PM ---------- Previous post was at 01:46 PM ----------
Nevermind. Turns out that is the stock recovery. Now my problem is I can't push the file over ADB. The ADB connection doesn't persist into recovery mode. I've followed the steps here: http://forum.xda-developers.com/showthread.php?t=2575783.
When the device is on normally, the ADB connection is fine. It shows up in the list of connected devices. When I reboot into recovery and choose "apply update from ADB" and then enter "adb devices" I get no devices connected.
In device manager, I see "LG-V510" under "other devices" but when I try to manually update the drivers to the google drivers as indicated in the post above, the computer says "Windows could not find driver software for your device."
Still need help...
Click to expand...
Click to collapse
I guess I'm not quite sure what you were trying to accomplish. If it is to install TWRP. You need to use fastboot from download mode and flash your recovery there, rather than trying to use adb from the recovery itself. "Fastboot flash recovery palman.img". , where palman.img is the name of whatever recovery you want to flash.

Fairly certain I did everything correctly according to the directions. When I press the yellow arrow about how long does it take to complete the install? When i started it, little box came up said some things that I don't remember and after about 30 seconds, the little box went away and the COM41 box says Ready!! Does that mean its finished? Just dont want to unplug tablet before the process is finished and brick it. Thanks
Nevermind, figured it out. Had to unplug device and plug usb back in and that triggered it to start.

sleekmason said:
I guess I'm not quite sure what you were trying to accomplish. If it is to install TWRP. You need to use fastboot from download mode and flash your recovery there, rather than trying to use adb from the recovery itself. "Fastboot flash recovery palman.img". , where palman.img is the name of whatever recovery you want to flash.
Click to expand...
Click to collapse
No, I was trying to sideload the 5.0 upgrade. Couldn't get my adb connection to persist through to recovery mode. Finally figured it out and was able to get the tablet upgraded this morning - but I had to use the TWRP backup method. Everything seems to be good to go now though!

Correct drivers
I'm having problems getting the port changed to 41 and I think it because the drivers aren't installing correctly. Could someone confirm from the screenshot below that I'm on the right track, or maybe post a shot of what the correct driver set-up should look like? Thanks.
**Edit: Got it, I did have the wrong drivers.

I don't think you have the right drivers installed. There should be two of them and mine were both banged-out yellow, but only when in download mode and with the software running. You don't even have a ports tab to change it (or you have the wrong device).
I gave up and restored the Lollipop backup someone posted, which worked great except then I had to re-root and flash TWRP again.

-MX- said:
I'm having problems getting the port changed to 41 and I think it because the drivers aren't installing correctly. Could someone confirm from the screenshot below that I'm on the right track, or maybe post a shot of what the correct driver set-up should look like? Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
If drivers are installed correctly, you should find it under Ports(COM & LPT) expand that and LG should be there. Right click and properties and find the COM41

shawn13165 said:
If drivers are installed correctly, you should find it under Ports(COM & LPT) expand that and LG should be there. Right click and properties and find the COM41
Click to expand...
Click to collapse
Yeah, definitely wrong drivers, had to do some uninstalling/reinstalling and finally got it to work.
Colchiro said:
I don't think you have the right drivers installed. There should be two of them and mine were both banged-out yellow, but only when in download mode and with the software running. You don't even have a ports tab to change it (or you have the wrong device).
I gave up and restored the Lollipop backup someone posted, which worked great except then I had to re-root and flash TWRP again.
Click to expand...
Click to collapse
I had given up for the 4.4.4 update when it initially came out and upgraded through TWRP, but now I'm running into issues with not being able to use the external SD card from the TWRP backup of LP that was posted, so I figured I needed to give this method a shot and do it right.

Any chance we will get the 5.0 TOT file for the v510? I tried following this guide: http://forum.xda-developers.com/showthread.php?t=2220801 and also tried using wireshark to capture the path in the LG Support tool but haven't had any luck with either method.

Thanks man. This helped me restore my G Pad when I thought all hope was lost.

Thank you very much, this worked perfect!

Yoga Tab 2 8" 830f failed update led to soft lock

So I downloaded a 16mb OTA update and let the tablet do its thing without touching it. I waited for the tablet to boot up, but it was stuck in a black screen for about 12 minutes until I decided to turn it off and on. It didn't work, so I went to the recovery to do a factory reset and clear the cache, but it still didn't work. I later went to this Russian forum here from this thread. I downloaded a lollipop rom and proceeded to flash it using Phone Flash Tool Ver. 5.2. It went well until 16% in where it failed. Unfortunately, I don't have a screenshot of this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(image of the files in the rom I downloaded)
After all this happened, I tried to start it up but I got the message "Boot Failed. EFI Hard Drive. Boot Successful - Enter Setup"
And now it won't go into recovery mode, but it does go into fastboot and bios setup.
Since it does go into fastboot, I tried to use a tool from this thread (Temp recovery) to use a temporary cwm recovery to hopefully be able to at least boot into that, but that didn't end up working.
I got another rom from the same Russian site that had differently packaged files but still the same stock lollipop rom.
I tried to just use the recovery from there to manually flash it using fastboot, but it still failed.
I later found this thread with these instructions for this problem.
1. download and extract this file someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
The file he linked in his post (ionioni ) was gone but I still tried to do this with the roms I had. And guess what? It still didn't work. The instructions said to place the tablet in DNX mode (meaning fastboot), which I did do...only when I put it into fastboot, it was set to DNX_OS which came to say "Wrong device state" in Phone Flash Tool.
I've tried what I could, but failed. Anyone have any suggestions?

AgentXGhost said:
So I downloaded a 16mb OTA update and let the tablet do its thing without touching it. I waited for the tablet to boot up, but it was stuck in a black screen for about 12 minutes until I decided to turn it off and on. It didn't work, so I went to the recovery to do a factory reset and clear the cache, but it still didn't work. I later went to this Russian forum here from this thread. I downloaded a lollipop rom and proceeded to flash it using Phone Flash Tool Ver. 5.2. It went well until 16% in where it failed. Unfortunately, I don't have a screenshot of this.
(image of the files in the rom I downloaded)
After all this happened, I tried to start it up but I got the message "Boot Failed. EFI Hard Drive. Boot Successful - Enter Setup"
And now it won't go into recovery mode, but it does go into fastboot and bios setup.
Since it does go into fastboot, I tried to use a tool from this thread (Temp recovery) to use a temporary cwm recovery to hopefully be able to at least boot into that, but that didn't end up working.
I got another rom from the same Russian site that had differently packaged files but still the same stock lollipop rom.
I tried to just use the recovery from there to manually flash it using fastboot, but it still failed.
I later found this thread with these instructions for this problem.
The file he linked in his post (ionioni ) was gone but I still tried to do this with the roms I had. And guess what? It still didn't work. The instructions said to place the tablet in DNX mode (meaning fastboot), which I did do...only when I put it into fastboot, it was set to DNX_OS which came to say "Wrong device state" in Phone Flash Tool.
I've tried what I could, but failed. Anyone have any suggestions?
Click to expand...
Click to collapse
This is the file you need https://drive.google.com/file/d/0B1LaMEhefCBgYzNTOUxJZmtWQ0E/view
And this https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
Ignore the oops error warning, it's something to do with what G drive can scan.

Holy Sh!t. this just absolutely worked!! I didn't think I could bring this thing back to life, but the files you linked just did it! Really, I don't know how to thank you enough for this.

corasman said:
This is the file you need https://drive.google.com/file/d/0B1LaMEhefCBgYzNTOUxJZmtWQ0E/view
And this https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
Ignore the oops error warning, it's something to do with what G drive can scan.
Click to expand...
Click to collapse
Hi folks,
had the exact same issue and indeed the 1st link offered (https://drive.google.com/file/d/0B1LaMEhefCBgYzNTOUxJZmtWQ0E/view) worked like a charm.
The second link is to download the "Intel platform flash tool lite", but I used my existing version of the Intel Phone Flash Tool (5.2.1-0) which worked fine with the image.
In other words, Corasman, it appears you have saved 2 people's life (or at least tablets) with your solution, so Thanks ! :good:
Regards.

Make that 3 people! Thank you so much corasman - your post has finally fixed my yoga 2 tablet, which I was sure would be going in the bin. Can't overstate how grateful I am - Cheers!

update 830f with 1050f rom?
updating 830f with 1050 rom? does it work?

hello. I have the same problem. I update OTA to lolipop. Since the table is slow, i tried flashing some ROM (which i cannot recall) and the tablet stopped working. Now, I am trying to flash the link you provided and it succeed. However after that i get blank Screen. what Could be wrong. My table is YT2 830LC. Please help

I am typing this all over again after my full report vanished. Do not have the patience of typing all that again. Suffice to say I had a similar situation with the boot failed EFI Hard Drive. Boot Successful - Enter Setup" message on my 830LC.
I had even found the bios restore tool for moving back from lollipop to kitkat but it too would hang. And attempts to flash lollipop would fail immediately with the same message as the OP, wrong device state.
So, in spite of it seeming completely counter-intuitive, I flashed the 1050F rom in the link shared by Corasman. Strange as it may seem, my tablet is now alive and working. No calling function, but it is working and calling itself a 1050F.
Now my research has to shift to whether the 830 LC rom can be flashed now.

i have a same problem with yoga 2 pro 1380f mr corasmancan help me

prabuddhadg said:
I am typing this all over again after my full report vanished. Do not have the patience of typing all that again. Suffice to say I had a similar situation with the boot failed EFI Hard Drive. Boot Successful - Enter Setup" message on my 830LC.
I had even found the bios restore tool for moving back from lollipop to kitkat but it too would hang. And attempts to flash lollipop would fail immediately with the same message as the OP, wrong device state.
So, in spite of it seeming completely counter-intuitive, I flashed the 1050F rom in the link shared by Corasman. Strange as it may seem, my tablet is now alive and working. No calling function, but it is working and calling itself a 1050F.
Now my research has to shift to whether the 830 LC rom can be flashed now.
Click to expand...
Click to collapse
i have same problem with my yoga 830lc this rom not work help me to run my tab agian
---------- Post added at 10:55 AM ---------- Previous post was at 10:47 AM ----------
corasman said:
This is the file you need
And this
Ignore the oops error warning, it's something to do with what G drive can scan.
Click to expand...
Click to collapse
hy sir downlod the rom from google drive but unable to download 2nd link (link not working)
i use latest intel flas tool light but the rom no flash to my device its show errors. plese sir help me to run my tab again

Mi 5s (X unlocking bootloader X) and root

Hi guys,
It turned out this script can't really unlock the bootloader. Although I didn't see it, my phone must have come with an unlocked bootloader.
I did another test on the same script but for Redmi 4X and the result was the same - can't unlock the bootloader.
So the moderators can delete this topic as it now serves no purpose. There are other topics for flashing TWRP and rooting the phone.
I am sorry for misleading you guys...
Here's how to install TWRP and SuperSu.
I'm not responsible if you brick your phone or lose data. I did a test on mine and all worked fine.
Info found here - (https://www.gizdev.com/root-xiaomi-mi-5s-unlock-bootloader/).
What you need:
1. Mi Flash Tool - Link(or just the ADB driver - Link)
2. Flasher ToolKit for Mi 5s - Link.
3. USB Debugging enabled in Developer Options
Install the Mi Flash Tool or the ADB drivers. Windows might tell you the drivers cannot be verified. Click on Yes to continue with the installation.
Unzip the Flasher ToolKit files to a folder on your computer.
Start with FLASHER TOOLKIT Capricorn.bat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit Enter and this is what you'll see:
First you need to unlock the bootloader, so click on 3. Bootloader Utility. - This only really checks if the bootloader is locked or not. Nothing else.
The program will inform that hitting Enter will restart the phone in Bootloader mode.
Once there the unlocking will begin and you'll see this:
Now the phone will restart.
Once it boots up Android, you can continue with the next step - installing TWRP. Now it's a good time to transfer the SuperSu zip file to your phone. In Downloads for example.
Select the first option - Flash ZCX-TWRP 3.0.2.X for Mi 5s.
The image will be transferred and the phone will be restarted in Recovery mode. It might take a while to load TWRP for the first time, be patient.
Now that you're in TWRP, click on Install, select the SuperSU zip file. Once flashed, go back to Reboot, System.
If something fails:
-The ADB drivers didn't work for me so I installed Mi Flash and unplugged/plugged the phone in the USB.
Check in Device Manager if the ADB drivers are loaded for your Mi 5s. If you don't see anything saying ADB, unplug the phone and plug it back in the USB. Or try another USB port. Or try uninstalling the current drivers and reconnect the phone again.
-If you've closed the Flasher ToolKit and you try to start it again, but nothing happens, open Task Manager and kill/end task the adb.exe *32 process.
- If your phone restarts in Recovery, but all you see is the TWRP logo for minutes, give it about 10 minutes. If nothing changes, restart the phone by pressing and holding the power button. Have you unlocked the bootloader first?
It might have been a good idea to take a camera and shoot every step of the process, but I was testing it to confirm it's working. Hence most of the screenshots are from the web.
Anyway, that's what I can think of right now. If I'm missing something or you can't get it to work, let me know.

yes do it plz

Yes, it's a great ideea. Do it pls.

it will be a good start to have a guide here, you should give all the ways you know, including the first step to unlock by contacting xiaomi, however if you find a guide for a certain section you can link to it (or copy it and add a link so it won't be broken) .
It would also be nice to have a guide for major roms, with some optional steps that not all are aware of, like switching to f2fp

Should be ready now. The good thing is that you don't need to contact Xiaomi to unlock the bootloader.

ok so i did everything you told me
but i fail
first i press the 3 and everything was ok my device is unlocked no problem and its restart automatic
next i go to fast boot... and when i press 1 its show me twrp is install
but after that noting happens ... i press vol up and power its go to mi recovery
my phone is on fast boot i check that with cmd
dont know way
eny idea what to do
eny other method ? can i install with mi flash tool ?
im so confuse

Did you see the TWRP logo when the recovery was supposedly installed? Repeat again the TWRP installation and let's see what will happen.

unicastbg said:
Did you see the TWRP logo when the recovery was supposedly installed? Repeat again the TWRP installation and let's see what will happen.
Click to expand...
Click to collapse
no noting show up ? eny other method ?

frozenline said:
no noting show up ? eny other method ?
Click to expand...
Click to collapse
I'd say the recovery image is not getting transferred to your phone. Do you see a confirmation that the img file was sent over? It usually states how much time it took to transfer over.

unicastbg said:
I'd say the recovery image is not getting transferred to your phone. Do you see a confirmation that the img file was sent over? It usually states how much time it took to transfer over.
Click to expand...
Click to collapse
yes exactly its not transferring
---------- Post added at 03:34 PM ---------- Previous post was at 03:01 PM ----------
ok i did it problem was the adb i install naked adb driver its on know...ok so how i install custom rom? its like my other phones but something new in mounting it seed read only ? i had to change that or something? witch to wipe?

When starting TWRP the very first screen asks if you want to mount the partitions in read only mode or full access. And a check box to never show this again. Have you seen that? If not, try to update TWRP to 3.1.x.x, don't remember the exact version, you can find it here, in the Mi 5s section of the forums.
If you get that working, installing a new OS is pretty easy - go to Install, select the ZIP file with the new OS and follow the instructions. You might want to wipe cache and dalvik to avoid force closures after that.
Usually instructions on how to install a specific OS version are found in that OS's forum section.

i all ready do that bye rename and replace the new twrp in the flash kit folder everything is don... what is the best rom right now to install?

That's really up to your preference. I'm on global developer 7.5.25. Some use LOS.

i tried your guide, but i cant unlock bootloader. After i select option 3, the phone restarts and the bunny appears but after that i only receive the message attached.
Can somebody tell me what i do wrong?

What's your current MIUI version?

I'm on 8.2.1.0 and on computer i have Windows 10. I enabled usb debugging and type on add device account
Trimis de pe al meu MI 5s folosind Tapatalk

To be honest I'm not really sure why it doesn't work for you. The phone restarts, so you have the adb drivers.
Here's a little something that deserves a shot - the very first post - http://en.miui.com/forum.php?mod=viewthread&tid=525726&extra=page=1&page=2&mobile=2
I'd love to hear back from you if that worked or not.

i make a request to xiaomi to unlock bootloader and they aproved it in 6 hours, so i will try with mi unlock tool when i get home today. i keep you informed. thx

In managed to unlock with official metod.
Trimis de pe al meu MI 5s folosind Tapatalk

I've taken a look at the code in the script and this method WILL NOT unlock your bootloader. This is only useful for flashing TWRP and rooting a phone, if your phone IS ALREADY UNLOCKED. The third picture provided in the original post is incorrect and that will not be printed on the screen. The script does not attempt
Code:
fastboot oem unlock-go
at any point.
You will probably have to go through the official unlock process.

oneplus 6T stuck on fastboot bootloop

hi team, i just bought a new oneplus 6T from china with Hydrogen OS, i changed it to Oxygen OS
but somehow it erased completly and stuck on fastboot bootloop, no bootloader, no recovery no system
i tried MsmdownloadTooln the laptop reconizes the phone but the operation stuck also on "param preprocessing"
please any help i would be greatful :crying::crying:

ritork said:
hi team, i just bought a new oneplus 6T from china with Hydrogen OS, i changed it to Oxygen OS
but somehow it erased completly and stuck on fastboot bootloop, no bootloader, no recovery no system
i tried MsmdownloadTooln the laptop reconizes the phone but the operation stuck also on "param preprocessing"
please any help i would be greatful :crying::crying:
Click to expand...
Click to collapse
Hey there I recently had the same problem with a OnePlus 6T... What I did was I installed everything manually using the ADB tools, in fastboot mode. Everything worked fine afterwards. Follow this guide, it will hopefully help.(It helped me ;D)
https://www.google.com/amp/s/forum....-stock-fastboot-roms-oneplus-6t-t3862516/amp/

Ethos001 said:
Hey there I recently had the same problem with a OnePlus 6T... What I did was I installed everything manually using the ADB tools, in fastboot mode. Everything worked fine afterwards. Follow this guide, it will hopefully help.(It helped me ;D)
https://www.google.com/amp/s/forum....-stock-fastboot-roms-oneplus-6t-t3862516/amp/
Click to expand...
Click to collapse
thanks for ur respond
i did this command "flash-all-partitions" but it showed me only "failed respond"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ritork said:
thanks for ur respond
i did this command "flash-all-partitions" but it showed me only "failed respond"
Click to expand...
Click to collapse
Make sure to have unzipped the compressed android file from the guide(whichever you decided to donwload) in the same folder as your ADB and Fastboot tools.
If it is still not working... try to manually flash everything in fastboot mode, that is what I did...
Download the latest version of android pie provided in the link from the guide( Google drive or Android Filehost), and then make sure to unzip the compressed file in the same folder where you installed your ADB and Fastboot Tool. Make sure a TWRP recovery image is in the same folder. (https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482)
Then, what you should do is to follow the guide where it says:
MANUAL FLASH: Windows - OSX - Linux
Get back to me after you finished. Read twice, execute once :good:

Ethos001 said:
Make sure to have unzipped the compressed android file from the guide(whichever you decided to donwload) in the same folder as your ADB and Fastboot tools.
If it is still not working... try to manually flash everything in fastboot mode, that is what I did...
Download the latest version of android pie provided in the link from the guide( Google drive or Android Filehost), and then make sure to unzip the compressed file in the same folder where you installed your ADB and Fastboot Tool. Make sure a TWRP recovery image is in the same folder. (https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482)
Then, what you should do is to follow the guide where it says:
MANUAL FLASH: Windows - OSX - Linux
Get back to me after you finished. Read twice, execute once :good:
Click to expand...
Click to collapse
Thanks a lot my friend
It works now after the second try
Thank u very much .. i really apreciate ur support mate

ritork said:
Thanks a lot my friend
It works now after the second try
Thank u very much .. i really apreciate ur support mate
Click to expand...
Click to collapse
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Thanks again mate <3

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Hey, i want to flash oxygenos on my chinese variant with hydrogenos. could you help me with the installation in order to avoid this kind of problems(bootloop,brick etc.)?

HackerGames197 said:
Hey, i want to flash oxygenos on my chinese variant with hydrogenos. could you help me with the installation in order to avoid this kind of problems(bootloop,brick etc.)?
Click to expand...
Click to collapse
PM me

Gracie mille !!! First brick and i hope never again but you where there.. Huge thanks.

Download the TOOL ALL IN ONE and if it says fastboot device connected, I think you'll be fine. Make sure right below that you choose OnePlus 6T. Then just download and flash the full rom and it fixed mine, I had the same problem.

bigmikey307 said:
Download the TOOL ALL IN ONE and if it says fastboot device connected, I think you'll be fine. Make sure right below that you choose OnePlus 6T. Then just download and flash the full rom and it fixed mine, I had the same problem.
Click to expand...
Click to collapse
Thanks a lot.
Would you share the link of the TOOL ALL IN ONE?
I also have the same bootloop issue.

Micheal86 said:
Thanks a lot.
Would you share the link of the TOOL ALL IN ONE?
I also have the same bootloop issue.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Hope this helps

I have the same problem
PLeaseeee help me I have a rooted oneplus 6t. I performed a backup and wipe in hope to clear a problem and am now stuck in fastboot mode. Im pretty sure as I tried to reboot it said no os detected, and then I got stuck. I have tried to install the latest oxygen os by manualling flashing 4 files. all tutorials i read have bootloader and other files while i just have - system_matrix , system_manifest , vendor_matrix, vendor_menifest (XML files by the way). I have flashed these files and rebooted only to go back to the fastboot screen.

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Bro please help me I didn't not much about this things but ill do flashing and customisation i bricked my Oneplus 6t its stuck on bootloader ill try msm tool also its shows param preprocessing ?
And my bootloader is also locked how can i solve this problem pls help me

For anyone running into a similar problem these are the steps I used
1. Download and extract files
a. Qualcomm drivers
b. MSM Oneplus 6t download Tool
2. Disable Driver Signature Enforcement by restarting your pc whilst holding shift, Choose trouble shoot, then going into more recovery ,select Advanced Options > Startup Settings > and then click on Restart.
3. Now PC will restart and Now you will see a list of startup settings that you can change. Select option 7 ‘Disable Driver Signature Enforcement’ by clicking f7
4. Now switch off your phone (by navigating through fast boot options)
5. While switched off hold both vol up + down for 5secs before connecting to your pc. *Your pc should recognise a phone is connected however nothing will be displayed on your phone*
6. Open device manager from start- Under Other devices there should be your phone (although it will be called smthn else), right click that and select update drivers
7. Browse computer for driver software and select folder with extracted QUALCOMM drivers (for me it was called unbrick).
8. The open the MSM application (run as admin tho) it should say device connected
9. Press start and you download should start- if error occurs or download stops unplug, power on, power off and the plug it again, now it should be fine.
10. Wait for download to finish and then your phone should be rebooted
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
mohitgaba14 said:
Bro please help me I didn't not much about this things but ill do flashing and customisation i bricked my Oneplus 6t its stuck on bootloader ill try msm tool also its shows param preprocessing
And my bootloader is also locked how can i solve this problem pls help me
Click to expand...
Click to collapse
Look at the post above

[GUIDE] OnePlus 8 5G ..TMobile..(IN2017) bootloader unlock instant

Disclaimer
While I will assist with any issues resulting from this guide, I disclaim all responsibility and cannot be held accountable for any consequences caused by the use or misuse of this tool or process. This method also will wipe your phone, so please back up your data. I also will disclaim any understanding as to why exactly this works, since this method was developed by someone else, I am just listing the instructions on how to use it. With that being said, understand your personal limits and read this entire guide before starting.
Thanks to the attributed users at the end of this post, to find this method we are waiting for years...
METHOD 1:
Part 1: Requirements:
• To follow this guide you will need
A Windows PC
• Latest MsmDownloadTool for Oneplus IN2017 - Link
• Latest version of platform-tools - Link
• The bootloader unlock.ops file - Link
Plug your phone into your PC using a USB 2.0 port (this is important, USB 3.0 has given me a lot of issues and just doesn’t seem to work all the time) and ensure USB debugging is enabled.
Extract the downloaded platform-tools zip and open the platform-tools folder in a command prompt, and Run adb devices and makes sure your device appears in the list.
Next, extract the instantnoodlet_15_O.16_201001.zip and open up the MsmDownloadTool V4.0.exe inside the instantnoodlet_15_O.16_201001 folder.
When the application opens, select “Others” under the User type dropdown and hit next. Leave this window and the platform-tools command prompt open.
Part II: Entering Qualcomm EDL mode and installing correct QDLoader Driver
Part III: Flash Stock Firmware
In this section, we will flash the stock IN2017 Android 10 firmware.
Click the “Start” button in Msmtool. This will flash the stock firmware, wiping your data. Make sure you have backed your data up at this point. It will take a few minutes, usually ~300 seconds. Once it completes, it will reboot into factory default android 10.
Close MsmDownloadertool and once you are back to android, unplug your phone and power it off.
Part IV: Unlock the bootloader
In this section, we will flash the unlockable firmware and unlock the device for good.
1. Inside the directory with MsmDownloaderTool V4.0.exe, there should be a file called “instantnoodlet_15_O.16_201001.ops”. Remove it from the directory, either by deleting it or moving it to another folder. Then take the unlock.ops file downloaded earlier, and drag it into the directory and rename it to instantnoodlet_15_O.16_201001.ops . It should be in the same folder as MsmDownloaderTool.
2. Reopen MsmDownloaderTool V4.0.exe and like before, select “Others” in the drop down, and click next. Leave the window open.
3. Hold in the Volume up and down buttons, then plug your phone back in. Keep holding the buttons until your phone connects to your PC as "Qualcomm HS-USB QDLoader 9008", like before. Check device manager to ensure that it’s connected correctly as a COM port. If it boots to android, power it off and try again.
4. Return to MsmDownloaderTool. Make sure the phone is still displayed in the list under the associated COM Port.
5. Click start. The flashing should take about 15 seconds, and when complete, your phone should restart. It will display a message at boot saying “<!> The device is corrupt..” Do not panic, this is normal.
6. Unplug your phone and hold Volume Up, Volume Down and Power until the device reboots and let go once it shows the OnePlus Logo and “Fastboot Mode”. You should arrive at a screen that has “Start” in big green letters at the top, and “Fastboot mode” below it, with the very last item saying “Device state - Locked” in red text.
Plug your phone back into your computer.
7. Return to your command prompt window open in platform-tools, and run fastboot devices and ensure your device is in the list.
8. Finally, run the command "fastboot flashing unlock", it should prompt you to confirm unlocking the bootloader. Once complete, it should reboot into Android.
9. Shut the phone off again, and then Hold Volume Up, Volume Down, and Power and let go when the OnePlus logo and “Fastboot mode” shows up on screen. If the final item in the list says “Device State - Unlocked”, Congrats! You have successfully unlocked your bootloader. You can follow your custom OS’s installation guide from here.
If you want to flash back to stock firmware again (relock bootloader), you have to first flash this file (stock.ops) and then flash the bundled stock firmware. It will give a mismatch error if you do not.

So this is essentially the same as the IN2019 guide, just with the IN2017? Sounds neat.

Did anyone tried on Oneplus 8 IN 2017, Is it working

MohmmadUzairKhan said:
Did anyone tried on Oneplus 8 IN 2017, Is it working
Click to expand...
Click to collapse
Yes...i converted mine IN2017 without token..also using dual sims now

badshah99 said:
Yes...i converted mine IN2017 without token..also using dual sims now
Click to expand...
Click to collapse
you converted that ROM into which rom ?
did you follow this method?
Which files you flash? share those files link in PM or here

Share that file link which you flashed in local update? to convert dual sim

First flash tmobile msm 15.O.16_201001
Then global EU fastboot rom 10.5.9
Then ota update

badshah99 said:
First flash tmobile msm 15.O.16_201001
Then global EU fastboot rom 10.5.9
Then ota update
Click to expand...
Click to collapse
OTA update which rom?
EU or any other zip file?
your are using dual sim in which rom? OOS 11
share that file link which you used in OTA upgarde

15.I.40 downgrade OTA

badshah99 said:
15.I.40 downgrade OTA
Click to expand...
Click to collapse
File link?

MohmmadUzairKhan said:
File link?
Click to expand...
Click to collapse
[OnePlus 8][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com

Dude good job

Now make a new guide on XDA to convert method to dual sim.

MohmmadUzairKhan said:
File link?
Click to expand...
Click to collapse
MohmmadUzairKhan said:
Now make a new guide on XDA to convert method to dual sim.
Click to expand...
Click to collapse
Its already there..also given on youtube

badshah99 said:
Its already there..also given on youtube,
Click to expand...
Click to collapse
,....

Does dual sim work on OOS 12 or OOS 13 beta?

finally! Good job man! Will try it asap. Hope dual sim functioning
edit2: works, I went to the T mobile rom and check allow oem unlock first and then msmdownload the unlock.ops
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit1:not working yet...trying to figure it out

dlhxr said:
finally! Good job man! Will try it asap. Hope dual sim functioning
edit2: works, I went to the T mobile rom and check allow oem unlock first and then msmdownload the unlock.ops
View attachment 5755213
edit1:not working yet...trying to figure it out
View attachment 5755203
Click to expand...
Click to collapse
flash again tmobile msm and try again..it will work

dlhxr said:
finally! Good job man! Will try it asap. Hope dual sim functioning
edit2: works, I went to the T mobile rom and check allow oem unlock first and then msmdownload the unlock.ops
View attachment 5755213
edit1:not working yet...trying to figure it out
View attachment 5755203
Click to expand...
Click to collapse
First Enable OEM Unlocking in developer options.

badshah99 said:
flash again tmobile msm and try again..it will work
Click to expand...
Click to collapse
yes. it works after I check allow oem unlocking before flashing the unlock.ops.
and dual sim works on oxygen 11, confirmed using my op 8 pro sim tray.
I see to prevent breaking the dual sim functionality, I have to use custom rom with magisk dual sim patch. But I see the custom roms are now based on oos 12. Can I flash oos 12 first and then to custom rom? will it break dual sim function?