So recently I went from stock to Lineage and now (after Nougat) I'm back at stock.
When I started using Lineage all of a sudden the green (charging) led also worked for notifications.
I really liked that. Is there a way to activate that again, but on stock? I can't find anything online...
Thanks
Edit: Using a XT1580
No. That's a custom ROM feature. In stock is only used as a low battery notification, and there's no way to control it.
Same thing with Quark, the predecessor to Kinzie. All the custom ROMs use the green low battery indicator as an LED notification light, thanks to @bhb27 (one of the main Quark devs). That's probably where the Lineage dev for Moto X Force got the code from.
Someone could probably make an Xposed or Magisk module that uses that code, but right now I don't know of a way on stock firmware.
Related
I'm using the latest LP nightly (3/27/15) and have had problems RECEIVING texts only since about the 3/19 build. Sending them works out fine, and I do eventually get the texts either later in the day or when I reboot the phone. I do use Textra, but seems irrelevant, as the stock google messaging app isn't receiving them in a timely fashion either. I'm on a Google Nexus 5 (hammerhead). I do notice upon boot and intermittently the warning at "unfortunately com.phone.android has stopped". Wondering if this is related. I WAS using ElementalX kernel for a bit, and thought that might be the problem. So this morning I flashed the nightly without flashing the custom kernel. Still the same problem. I also use Xposed framework, however left that off as well just for a test. Same results. Is this a known bug? Any other information that I could provide to help?
In case a list of the xposed modules I use would be helpful, here they are.
enable ambient display xposed
force pandora rich notification
pandora patcher
greenify
lolistat
statusbar download progress
Been a long time Pacrom user and don't wanna give up on this rom as it's always been dependable, feature packed and the best in terms of battery life. Thanks for any help in advance.
EDIT: Also, for further clarification, I do have multirom with CM12 as my secondary rom. The texts are coming in fine there. Hence why I'm convinced it's a problem with the rom and not my carrier or hardware.
Hi,
After some issues with CM, I moved to stock 5.1.1. I added xposed and gravitybox for my desired tweaks, and now everything works as I like it except the LED.
It's just dead. Nothing gets it to shine except when charging (so I know it's not a hardware issue).
I've tried with GravityBox's Ultimate Notification feature (I have the paid version), and also other apps like Light Flow, Light Manager, and LED Test, but nothing turns the light back on.
Any ideas? something else to try?
Thanks.
Hi, so recently i flashed a custom rom called [JDCTeam][STABLE][5.1.1][26 January] Optimized CyanogenMod 12.1 builds (http://forum.xda-developers.com/gal...lop/exclusive-antaresone-alucard24-s-t3066696)
on my phone and since then, everytime I turn on my phone a variety of light like light led just flashes before my phone turn on so i was just wanted stop them but don't know how,:crying::crying::crying:
If anyone can help me, that will be super awesome. Thanks for reading this
It's normal.
But there should be an app called JDC Toolbox that gives you some LED settings.
I've been looking around these forums for quite a while now, hoping to find a near-stock ROM based on the latest NPN25.137-83 North American firmware that has integrated notification LED support. Unfortunately, I haven't been able to find anything.
This ROM is the closest thing I can find to what I'm looking for. Very nearly stock - just zipaligned, debloated, deodexed, a simple camera mod, and the LED enabled for notifications. The only downside is that it's not based on 137-83. Considering the March security patch, it seems to be based on 137-67 at the latest. And the developer of the linked ROM apparently has no plans to integrate the August security patch or the rest of the 137-83 firmware (a big problem for me considering the Verizon VoLTE bugs on 137-67).
There are other solutions too, like the Moto LED enabler app, but it's not that reliable. The blinking follows some sporadic and unappealing pattern, and it sometimes likes to stop blinking entirely after a while. The list of apps that enable the LED also seems to periodically reset itself.
So, my question is as follows: would someone release a ROM similar to the one I linked with the latest firmware and patches? Or perhaps can we just get a TWRP flashable zip to enable the LED for notifications? I'll gladly pull some weight on this if someone can point me in the right direction. Thank you!
Would really like to see this implemented as well, Paranoid Android rom I tested a while back also had this implemented very well, even works with screen on.
I'd like this as well.
I tried with Tasker but, due to deep sleep, it stops to work after few seconds of screen off (it works fine only enabling the option "Keep Device Awake" but battery drains quickly)
Hi all.
I installed Nitrogen OS Oreo with the full knowledge that the LED didn't light up when charging. However, with my brief use of it, the LED never lit up for anything. Since the battery life wasn't to my liking, I installed Fake Nexus 7.1 ROM. The LED still never lit up.
So, I installed Google's stock image for 5.1.1 LMY48T, figuring that should fix things. That didn't work either. "Pulse notification light" is set to on.
I installed LED Tester and it's able to make the LED light up in all its glorious colors, so I don't think it's a hardware issue.
The LED worked fine before installing Nitrogen OS Oreo.
Any idea what happened? Anyone know how to fix it?
Thank you.
pfederighi said:
Hi all.
I installed Nitrogen OS Oreo with the full knowledge that the LED didn't light up when charging. However, with my brief use of it, the LED never lit up for anything. Since the battery life wasn't to my liking, I installed Fake Nexus 7.1 ROM. The LED still never lit up.
So, I installed Google's stock image for 5.1.1 LMY48T, figuring that should fix things. That didn't work either. "Pulse notification light" is set to on.
I installed LED Tester and it's able to make the LED light up in all its glorious colors, so I don't think it's a hardware issue.
The LED worked fine before installing Nitrogen OS Oreo.
Any idea what happened? Anyone know how to fix it?
Thank you.
Click to expand...
Click to collapse
Wipe everything and install stock and check.
tnsmani said:
Wipe everything and install stock and check.
Click to expand...
Click to collapse
Installing the stock image wipes everything. Thanks, though.
Since the battery life of the stock image isn't so great, I thought I'd be adventurous and install LineageOS 14.1. last night Somehow doing that has made the LED work again. I'll leave it installed for now and see if I like it.
So I guess the problem is solved, though it's still a mystery.