Related
The firmware are available for two regions: UK (BTU) and the Czech Republic (O2C). You can download these Nougat-based firmware files and flash your compatible Galaxy S7 models manually (you should also be able to update your device through Samsung Smart Switch on your PC). Galaxy S7 edge firmware shouldn’t be far behind, and we will be sure to let you know once those show up in our database.
For S7 Edge : https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
For S7 : https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Source: sammobile.com
will it work on dual sim s7 edge (sm-g935f)
sagor1 said:
will it work on dual sim s7 edge (sm-g935f)
Click to expand...
Click to collapse
Yes
Right .. I've been reading and researching this .. but can't find a definitive answer. Perhaps one of you gurus can assist. According to Phone INFO I have the following setup:
Bootloader/PDA/Baeband Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
When I try to use/install the Galaxy Gear VR, I keep getting "network error". From my research, this is linked to the CSC. Question is, how do I restore it to base CSC - without rooting?
Any help would be appreciated.
Cheers.
nice. can somebody upload the firmware somewhere else cuz i have to w8 9 hours to dld from sammobile
antenehnile said:
Yes
Click to expand...
Click to collapse
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
sagor1 said:
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
Click to expand...
Click to collapse
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
naryraza said:
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
Click to expand...
Click to collapse
Thanks Brother.
https://drive.google.com/drive/folders/0BzXXEylDgfZ0MU1EVnh3YnAtc0k
now i am downloading this (2.15gb!)....is it legit? (find it on other xda thread)
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
is this right instruction?(sammobile)
Because i am so confused about cse,csx,btu......etc on the other thread
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
daLareid said:
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
Click to expand...
Click to collapse
I didn't try yet another SIM but duos options are there... so Insuppose you wont have any problem with it
Sent from SM-G935FD w/ TapaTalk
Hello,
i have a belgian S7 edge and flashed a while ago the british nougat beta firmware.
yesterday i wanted to go back to my countries own firmware but was still marshmallow on sammobile.
so i installed this version using odin.
but when i did a recovery and wiped everything it installed german apps and the language was in german.
i tought that my CSC wasnt correct so i only flashed the CSC from the marshmallow rom for my country but the problem remains.
now i have multi CSC but i only want one and that is CSC PRO (Belgium Proximus)
how can i fix this? i tried the code with *#27*imei# but nothing works?
because of this problem i cannot use VOLTE on my own operator.
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
And which csc shpuld i choose for example?
_DrG_ said:
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
Click to expand...
Click to collapse
And which csc should i choose for example?
nielsvg said:
And which csc should i choose for example?
Click to expand...
Click to collapse
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
I also have the same problem. Last month I flashed a BTU firmware because I haven't got the Nougat update yet here in the Philippines and I really wanted to try out the Nougat update as soon as it started rolling out in UK. This month the Nougat update finally rolled out here in the Philippines so I decided to go back to Philippine firmware which is XTC. After flashing I got the Thailand CSC (THL) even though I flashed the Philippine firmware (XTC). My s7e is not rooted and I have no plans on rooting it. Can someone help me go back to Philippine CSC? Thanks in advance.
Piravinth said:
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
Click to expand...
Click to collapse
And this will surely work because on sammobile forum they say it isnt possible to change it back
nielsvg said:
And this will surely work because on sammobile forum they say it isnt possible to change it back
Click to expand...
Click to collapse
The CSC you are trying to flash maybe part of the same firmware so you have to change to another csc entirely. Try KSA CSC firmware and flash the PRO CSC firmware
I am in the UK and my phone orgibally had XEU CSC and I wanted to flash the BTU CSC to get Nougat however because BTU and XEU were in the same firmware this meant when I flashed the BTU CSC I still had the XEU CSC.
So I flashed KSA CSC and flashed BTU CSC and now I have BTU
Piravinth said:
The KSA CSC wouldn't be part of the multi-csc you have so if you flash that and flash the firmware that has the CSC you want you should get that CSC
I am in the UK and had the XEU CSC and wanted to flash the BTU CSC to get Nougat however because BTU is part of a multi-csc this meant when I flashed the BTU CSC I still had the XEU CSC. I flashed KSA CSC and flashed BTU CSC and now I have BTU
Click to expand...
Click to collapse
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
nielsvg said:
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
Click to expand...
Click to collapse
Yes
Piravinth said:
Yes
Click to expand...
Click to collapse
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
nielsvg said:
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
Click to expand...
Click to collapse
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Piravinth said:
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Click to expand...
Click to collapse
ok thx will try it now
nielsvg said:
ok thx will try it now
Click to expand...
Click to collapse
Also flash the KSA firmware with reparation enabled
Piravinth said:
Also flash the KSA firmware with reparation enabled
Click to expand...
Click to collapse
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
nielsvg said:
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
Click to expand...
Click to collapse
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Piravinth said:
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Click to expand...
Click to collapse
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
nielsvg said:
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
Click to expand...
Click to collapse
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Piravinth said:
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Click to expand...
Click to collapse
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
nielsvg said:
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
Click to expand...
Click to collapse
What is going on?
When flashing the KSA CSC firmware, did you add the BL,AP,CP AND CSC files and did you choose the csc file and not the home csc?
Did you follow the same step when flashing PRO CSC firmware?
Hi all,
Bought an s8 here in the UK but the CSC is TIM (italy) want to insall XEU firmware tried Odin with reset that I would normally use to work but it's staying as TIM??
Any help?
Sent from my SM-G950F using Tapatalk
You must hard reset after the odin flash...
Done hard reset from software
Sent from my SM-G950F using Tapatalk
jus71n01 said:
Done hard reset from software
Click to expand...
Click to collapse
Find a firmware without a multi CSC I believe XSA and UK carrier firmwares all are like this.. Check the repartition box. Flash and don't use the Home CSC. Let the phone boot and then flash your multi CSC firmware. That is how I have gotten around it my S7 edge when I was trying to make Samsung Pay work.
Panzerapple said:
Find a firmware without a multi CSC I believe XSA and UK carrier firmwares all are like this.. Check the repartition box. Flash and don't use the Home CSC. Let the phone boot and then flash your multi CSC firmware. That is how I have gotten around it my S7 edge when I was trying to make Samsung Pay work.
Click to expand...
Click to collapse
Would this trip knox? I have S8+ SM-G955F with TIM CSC and wanting to use Samsung Pay in Australia.
tronghien said:
Would this trip knox? I have S8+ SM-G955F with TIM CSC and wanting to use Samsung Pay in Australia.[/QUOTE
Flashing stock Samsung firmware will not trip knox.
Click to expand...
Click to collapse
Panzerapple said:
Flashing stock Samsung firmware will not trip knox.
Click to expand...
Click to collapse
Hey thanks for the quick reply. So just confirming before I start, you reckon below are the steps I should take?
1) Flash with a non multi-csc firmware, such as the Australian XSA (check the repartition box, and don't use HOME_CSC)
2) Reboot, then flash again with a multi-csc firmware, such as the Netherland PHN firmware.
And, when flashing do I pick all 4 files in Odin (BL, CP, AP, CSC)?
Thanks for your help.
tronghien said:
Hey thanks for the quick reply. So just confirming before I start, you reckon below are the steps I should take?
1) Flash with a non multi-csc firmware, such as the Australian XSA (check the repartition box, and don't use HOME_CSC)
2) Reboot, then flash again with a multi-csc firmware, such as the Netherland PHN firmware.
And, when flashing do I pick all 4 files in Odin (BL, CP, AP, CSC)?
Thanks for your help.
Click to expand...
Click to collapse
If you want Samsung Pay works in the USA also then just flash XSA with all the files and don't use home csc and your done.
The only time I had issues is when you want to switch from a multi csc to another multi csc. Example German csc to UK csc because they use the same firmware. That is when I flashed a fixed csc then flashed a multi csc. So I could get the specific csc to work on my phone. Supposedly you can do it differently through the dialer I think. It never worked for me.
I have my s8 and my gf's s7 edge both on XSA because Samsung pay and white pages both work. Only downside is you get updates a month later then BTU.
I hope that makes sense if not pm me.
Thank you. It works as you said.
hello. with odin i can't be able to flash firmware TIM italy nougat or oreo. it try to flash but fails in 1 second. instead if i flash nobrand firmware oreo or nougat it go fine. is it impossible or do i wrong anything? i used home csc file but no results. i hope an answer
Use csc not home_csc
Thanks many... And after can i return to unbranded using csc again?
Yes just flash unbranded firmware. Use Odin 3.13.1 for Oreo firmware
As you know, Oreo is out in U.K.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU2ERD5/217550/
I have G-935F and it is from Vietnam. Is it possible to flash the official U.K. release and use it without any problems?
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Havik1453 said:
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Click to expand...
Click to collapse
Great . Can you upload it to google drive after downloading.
kwaasung said:
Great . Can you upload it to google drive after downloading.
Click to expand...
Click to collapse
Since it is from Sammobile.com, I don't think it is right to upload it to other site because it's their files. You can get Premium Service for faster downlad tho.
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
komok said:
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
Click to expand...
Click to collapse
yes you can , i have been flashing single sim firmware to dual sim s7 edge.
both sim works .
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Tommolo said:
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Click to expand...
Click to collapse
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
meawww said:
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
Click to expand...
Click to collapse
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Maybe it will get ota from multi csc too as OXA or maybe it will fixed ota from current ITV. We will find out if theres an ota update to any of those country listed in OXA csc which are france uk germany italy poland
I got same problem with You guys but i found solution, i downloaded firmware TCL portugal install via odin boot up to first settings turn off my phone and go to recovery mode again wipe cache and data, go to download mode and install BTU. If You wanna faster download via samobile use tool samfirm and it will be faster
https://forum.xda-developers.com/showpost.php?p=76398677&postcount=4037
use this link folks and download official oreo firmware BTU and install it through ODIN.
Thats it
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
raider2k9 said:
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
Click to expand...
Click to collapse
That's what I did. Three times. With Odin and from the stock recovery too.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Since BTU and ITV are in same OXA CSC file you must first flash a non OXA firmware like NEE , EUR, DBT and then reflash the BTU firmware.
OXA is multi csc file. ALL in same group wont change from ITV.
Tommolo said:
That's what I did. Three times. With Odin and from the stock recovery too.
Click to expand...
Click to collapse
I forgot the important Point so far.. you Need to boot first time with simcard for BTU region to set CSC to BTU.. because multi-CSC changes CSC after wipe and only when simcard from the other Country is inserted
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
DBT is a OXA Firmware so far.. on my S8 it was the Point.. S7 DBT isn´t OXA?
how to root official oreo rom my samsung helath not work , i need one way to root official oreo uk , please help me
I can't flash with odin
Good afternoon, someone can help me, try to flash the rom btu and the odin tells me pass but when restarting there is no change of android. Now I have android 7 region DBT and probe flashing with home_csc and csc and with the same thing happens, no change. Greetings and thanks
Use Odin 3.13 and uncheck F. Reset Time.
I had XEO csc. I've used HOME_CSC_OXA.
Installation was a success. It didn't erase my data. 0x0
Will see how it goes