I flashed AICP last week then i got back to Stock rom but now everytime i restart or switch on my phone gets into bootloader mode even when i try to install ota i get into bootloader mode then i have to get onto recovery mode to install ota.please help
Volume down button stuck?
I've seen this come up before... Did read through q&a?
lafester said:
I've seen this come up before... Did read through q&a?
Click to expand...
Click to collapse
Yeah but i can't find any give me the link.
You are probably still in oem flash mode, after you flashed stock ROM did you enter 'fastboot oem fb_mode_clear'? If you didn't, everytime you restart it will return to the bootloader.
acejavelin said:
You are probably still in oem flash mode, after you flashed stock ROM did you enter 'fastboot oem fb_mode_clear'? If you didn't, everytime you restart it will return to the bootloader.
Click to expand...
Click to collapse
I followed the commands given in forum for installing stock rom the final command was 'fastboot reboot' it didn't have the command you mentioned.
[email protected] said:
I followed the commands given in forum for installing stock rom the final command was 'fastboot reboot' it didn't have the command you mentioned.
Click to expand...
Click to collapse
It should be the command right before the reboot. I don't know what instructions your following, but I've flashed several Motos.
Sent from my XT1575 using Tapatalk
acejavelin said:
It should be the command right before the reboot. I don't know what instructions your following, but I've flashed several Motos.
Click to expand...
Click to collapse
CODE]adb reboot bootloader
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot[/CODE]
I used these commands to flash the rom does adding the command you mentioned before 'fastboot reboot' solve the problem. By the way thanks for replying.
[email protected] said:
CODE]adb reboot bootloader
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot[/CODE]
I used these commands to flash the rom does adding the command you mentioned before 'fastboot reboot' solve the problem. By the way thanks for replying.
Click to expand...
Click to collapse
Hmmm... this is the procedure I have, granted it's from the Moto G3, but both the X Pure/Style and G 2015 are Moto 3rd Gen devices...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
acejavelin said:
Hmmm... this is the procedure I have, granted it's from the Moto G3, but both the X Pure/Style and G 2015 are Moto 3rd Gen devices...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thanks will try this commands
[email protected] said:
Thanks will try this commands
Click to expand...
Click to collapse
Look at the servicefile.xml in the image, it should contain all the commands, it gives the exact procedure, you just have to interpret it correctly.
if i relock my bootlader with cmd flashing stock rom and oem lock than i get error your device has failed verification and may not work properly
than i tried with moto tool than it says device unlock and annot be trusted
pls help me i want to relock bootloader
Try the following commands, they worked for me. On my device no more bootloader unlocked warning-
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
I need the procedure to flash Firmware MPJ24.139-64/65 for Moto G4 XT1625. ; which is the procedure to follow?.
I have the device currently in soft brick state.
Many thanks for you help and support.
GersonS001 said:
I need the procedure to flash Firmware MPJ24.139-64/65 for Moto G4 XT1625. ; which is the procedure to follow?.
I have the device currently in soft brick state.
Many thanks for you help and support.
Click to expand...
Click to collapse
There are a several posts that show how to do this. Try searching the forums instead of expecting others to do it for you.
Firmware Download: http://a df.ly/1fRBXU
Firmware pass : www.stockrom.net
To get the download firmware please link the letter a to df.ly
Use this instruccions to flash with fastboot:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I installed and rooted with TWRP in June. I thought it just installs updates via bootloader, but it needs stock recovery. So, I'm stuck with a update waiting, and it's required to update to Naugat. I tried installing Naugat from a zip, but I kept getting errors. Help?
http://www.filefactory.com/file/x59...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the link ,
Install commands are
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin mfastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Extract the file where you have twrp copy. So you dont have to install any driver.
Then run command prompt type "fastboot devices"
It will show som3 id if you device should be detected. Befor doing this you must be in bootloader state
Akash Sharma123 said:
http://www.filefactory.com/file/x59...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the link ,
Install commands are
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin mfastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Extract the file where you have twrp copy. So you dont have to install any driver.
Then run command prompt type "fastboot devices"
It will show som3 id if you device should be detected. Befor doing this you must be in bootloader state
Click to expand...
Click to collapse
I keep getting errors where it cant find it.
lometon said:
I keep getting errors where it cant find it.
Click to expand...
Click to collapse
Im stupid. I was putting it in the wrong folder... I had to put it in Program Files. *facepalm*
Hi guys. I've tried going locking my bootloader and going back to stock but I get this error after running:
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
I get: "Still require signed system.img and/or oem.img"
Then I run:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
And when I send the last command I get the warning screen about my phone being locked and it goes back to bootloader.
I'm on the XT1680 variant, using this firmware: https://mirrors.lolinet.com/firmware/moto/potter/official/RETAR/
Has anyone had better luck doing this?
The correct commands are here: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433