I have a Samsung galaxy s7 edge which is still on the marshmallow firmware. It is 6.0.1
baseband version: G935FXXU1APB2
Is there anyone out there who is like me with still no Nougat update.
Iv searched for new updates but it keeps saying I am on the latest firmware.
I know s7 edge has had the nougat update for a while now just wondering how or when I will get it?
Thanks
which country are you using your phone in ?
Have you done any modifications to your phone, that could cause the phone no to download updates ?
Nope no modifications. Was bought from ebay.
Iv installed this phone info app and iv gone into that and it says latest firmware forbidden?
Why is this the case?
The csc codes are blank too
I am in the UK
Go to sammobile and download stock firmware for your country and network and flash with odin..make sure you check what chip your device is..ie snapdragon or exynos?
Sent from my SM-G935F using XDA-Developers Legacy app
thanks for you reply.
It unlocked version i think its the Europe version and how do i know what processor it is?
Also does it matter which one i install CSC
i am going to install the UK Europe one and will that be ok flashing with odin
Does this process void warranty.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/
is that ok above?
Iv installed Sammobile device info app and that shows baseband version product code and boot loader but CSC is blank.
So if i just flash CSC and then try OTA update from phone will it find Nougat update?
Yes flashing csc should be fine..i think its btu..and it wont void warranty as its a stock firmware and not custom..
Sent from my SM-G935F using XDA-Developers Legacy app
01484 said:
thanks for you reply.
It unlocked version i think its the Europe version and how do i know what processor it is?
Also does it matter which one i install CSC
i am going to install the UK Europe one and will that be ok flashing with odin
Does this process void warranty.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/
is that ok above?
Click to expand...
Click to collapse
Download phone info from playstore it will tell you your phones hardware..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935F using XDA-Developers Legacy app
Thanks can i just flash csc or do i need to flash any other things like modem? Or anything else in odin?
Csc is fine..its only a file to find your region and once you do a software update on your phone it will download all necessary files anyway which will be different on nougat..
Sent from my SM-G935F using XDA-Developers Legacy app
One final thing which csc file do i flash can ypu point me in right direction please?
Dont want to brick the phone.
Thank you
01484 said:
One final thing which csc file do i flash can ypu point me in right direction please?
Dont want to brick the phone.
Thank you
Click to expand...
Click to collapse
Well btu is the uk unlocked one so i would go with that..have you used odin before?
Sent from my SM-G935F using XDA-Developers Legacy app
Yes used odin before many years ago been a while i think you just select the csc file you want to flash and put the phone in download mode and flash it.
Do you think thats the reason why the phone does not update to nougat because its missing the csc file?
Where do i get the csc file from sammobile?
Thanks for your fast response.
01484 said:
Yes used odin before many years ago been a while i think you just select the csc file you want to flash and put the phone in download mode and flash it.
Do you think thats the reason why the phone does not update to nougat because its missing the csc file?
Where do i get the csc file from sammobile?
Thanks for your fast response.
Click to expand...
Click to collapse
Yes m8 as every update is different for other regions..but you might aswell flash the whole firmware as you have to download it all for the csc anyway..and check on afew youtube videos m8 before flashing as this phone is abit more different compared to years ago..
Sent from my SM-G935F using XDA-Developers Legacy app
Thats fine thanks a lot for your help.
Will download nougat firmeware when sammobile site goes into action at the moment cant download free version due to maintenance work.
Will the firmware contain all the files that are needed to flash? CSC/PDA
Im on marshmallow now can i flash using odin the nougat?
Sorry for asking so many questions its just that last time i flashed using odin was using the galaxy s2 times. Dont want to risk a bricked phone.
Just want it to update to nougat thats all.
Thanks for your help once again might need you when iv downloaded the firmware and about to flash it in a couple of days time.
Ha no worries..yes u just download the s7 edges model and network and the country you want in sammobile download it and it will contain three files and it will overwrite everything and upgrade to nougat..its fine the s7 isn't easily bricked flashing official firmware but is slighty different from the s2 days..?
Sent from my SM-G935F using XDA-Developers Legacy app
---------- Post added at 10:35 PM ---------- Previous post was at 10:30 PM ----------
https://www.google.co.uk/url?sa=t&s...sg=AFQjCNFEBI4iEXEFUueMclug41M95cC4qQ&cf=1 theres a rough guide to tell you what to do hope it helps?
Sent from my SM-G935F using XDA-Developers Legacy app
---------- Post added at 10:46 PM ---------- Previous post was at 10:35 PM ----------
You can download the files from that link its btu aswell..
Sent from my SM-G935F using XDA-Developers Legacy app
for faster download you can also get it from fw.updato.com
is that the latest verison of the nougat firmware or shall i go on sammobile and download it from there?
Not an old patch update?
01484 said:
is that the latest verison of the nougat firmware or shall i go on sammobile and download it from there?
Not an old patch update?
Click to expand...
Click to collapse
Whatever suits u..but even if its not the latest firmware..you can update to the latest through ur phone updates..
Sent from my SM-G935F using XDA-Developers Legacy app
Well how have you got on r u running nougat yet?
Sent from my SM-G935F using XDA-Developers Legacy app
Related
Hi
Has anyone tired SM-G935U for T-Mobile does wifi calling works, and video calling.
I gave it a go yesterday. I would not recommend it. It seems like it is causing issues, if you follow the thread on it. Also if you are on the July 1st security patch (the update that came out on 07/08/2016) then trying to flash the G935U firmware will softbrick your device. Either way the best way to get back to stock is to use Smart Switch and re-initialize the phone. You will lose all of your internal data either way.
ShrekOpher said:
I gave it a go yesterday. I would not recommend it. It seems like it is causing issues, if you follow the thread on it. Also if you are on the July 1st security patch (the update that came out on 07/08/2016) then trying to flash the G935U firmware will softbrick your device. Either way the best way to get back to stock is to use Smart Switch and re-initialize the phone. You will lose all of your internal data either way.
Click to expand...
Click to collapse
Ok thanks for the infor. Did wifi and video calling worked. I'll wait until G935U gets firmware update.
Are you asking about SM-G935U firmware on the SM-G935T or using the SM-G935U on the T-mobile network?
qwewqa said:
Are you asking about SM-G935U firmware on the SM-G935T or using the SM-G935U on the T-mobile network?
Click to expand...
Click to collapse
SM-G935U firmware on the SM-G935T
Didn't try with the latest FW, but when I tried installing before I constantly softbricked my phone.
Sent from my SM-G935T using Tapatalk
If you have the actual g935u device, everything works with tmobile
minhajmsd said:
Didn't try with the latest FW, but when I tried installing before I constantly softbricked my phone.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
SM-G935T is on v3 while SM-G935u is on v2 which is causing the softbrick .
Have anyone tried this recently? as of October 1st? Reports on the AT&T forum seem to suggest that it's working now.
where is the link at for the new G935U UPDATE FOR TMO
this is encouraging please keep us informed of any progress
I have the SM-G935U Olympic edition running on T-Mobile with the latest firmware PG9, Aug. 1st patch and I can see LTE+ every now and then. I do also see the option for WIFI-Calling and VOLTE. I can not verify if they worked properly but the options are there. Im not rooted because I still want Samsung Pay for now. ROM seems fast and good battery life and no T-Mobile BLOAT I was able to uninstall (yes uninstalled not disable) even the samsung email app and samsung+.
hi came version https://samsung-firmware.org/download/Samsung Galaxy S7 edge/3f48/TMB/G935UUEU4API3/G935UOYM4API3/
diligent7771 said:
hi came version https://samsung-firmware.org/download/Samsung Galaxy S7 edge/3f48/TMB/G935UUEU4API3/G935UOYM4API3/
Click to expand...
Click to collapse
It looks like the bootloader for the Unbranded version has increased. This should allow us to switch from T-mobile to U since they are now both at 4.
If you follow the release of older firmware it coincides with new bootloader revisions. If so then the AT&T, T-mobile and Unbranded version are all now at bootloader 4 which allows us to flash any one of them.
For example, if you look at the history of firmware releases for the T-mobile variant, you'll note the number has changed when the bootloader has been updated.
https://samsung-firmware.org/model/SM-G935T/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, I just upgraded my Tmobile version which was on v3 bootloader to the new SM-935U firmware and sure enough, it updated the bootload to v4:
U firmwares were updated and uploaded onto sammobile today with v4 bootloader, i have downloaded it and updated my phone to the U. ill post pictures in a few. i will also upload the firmware to my drive for everyone
guaneet said:
U firmwares were updated and uploaded onto sammobile today with v4 bootloader, i have downloaded it and updated my phone to the U. ill post pictures in a few. i will also upload the firmware to my drive for everyone
Click to expand...
Click to collapse
Please post!!
and firmware you can throw G935UUEU4API3 TMB can not download throw throws on Google
https://drive.google.com/drive/folders/0B3x0VW7b32-WdEtKSGNScllhT3c?usp=sharing
G935UUEU4API3 firmware! enjoys
guaneet said:
https://drive.google.com/drive/folders/0B3x0VW7b32-WdEtKSGNScllhT3c?usp=sharing
G935UUEU4API3 firmware! enjoys
Click to expand...
Click to collapse
Thank you! Thank You!
the other link keeps failing on me.
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Spent forever downloading from updato, then the zip wouldn't extract
Sent from my SM-G955U using Tapatalk
Link is up!
Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
This works wonderfully!! Bixby works now!! Thank you!
should I only flash ap if I don't wanna lose data or am I supposed to flash everything?
I flashed everything and I didn't lose any data. Except home and userdata. I used 4 files only.
Venom0642 said:
Link is up!
Click to expand...
Click to collapse
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model :SM- G955U
In region : LRA, USC or ACG all regions are same as AT&T if you just flash 4 files with out HOME_CRC or USER_DATA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
EDIT2: fixed error.
norbarb said:
Ok here you got , i think this is exactly same firmware.
Download zip from attachment
unzip and start
In model : G955U
In region : LRA
Check : auto, checkCRC32, Decrypt automatically
hit : Check for updates.
it took me around 7 min to download firmware.
EDIT: Has tag from what i download my way is exactly the same as yours
Click to expand...
Click to collapse
This is what shows when hit update!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Venom0642 said:
This is what shows when hit update!
View attachment 4220431
Click to expand...
Click to collapse
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
norbarb said:
It is my mistake... forget to add SM-G955U ...lol
Model should looks like this : SM-G955U
Click to expand...
Click to collapse
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Venom0642 said:
Yup same one took me 5min and 14sec to download it lol , but it's AT&T S8 Plus QF7
Sent from my Samsung Galaxy S8+ using XDA Labs
Click to expand...
Click to collapse
Looks like do to weekend they did not updated yet to QG1
First Time
I flashed my T-Mobile S8+ to AT&T successfully the other day. In order for me to install this newer version, I assume I just have to do it in Odin like before? I followed this guide (Flashing Standard Firmware) after doing the Carrier Switch last time: https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Just making sure from now on I just basically have to do the updates in Odin...
Venom0642 said:
AT&T Stock ODIN G955USQS1AQF7 , For those that might need it!
Link: https://www.androidfilehost.com/?fid=961840155545583640
MD5: 91ac5aa5686452bb1434b11bb796eeb2
ODIN v3.12.5: https://www.androidfilehost.com/?fid=817550096634787635
MD5: b842e9d1c91f4fe8c9394ee9859320b0
Click to expand...
Click to collapse
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
norbarb said:
Awesome!! If LRA region are AT&T I will have very easy way to download Odin firmware as soon as at&t release update.
On Edge of Galaxy
Click to expand...
Click to collapse
what is LRA region? (noob question I know)
Ma$etas said:
I have a Verizon galaxy s8 plus that I am currently using on AT&T's prepaid service can I install this software/firmware on my phone without the risk of bricking it?
I don't need to have the phone unlocked correct? (if that is even possible right now)
what is LRA region? (noob question I know)
Click to expand...
Click to collapse
LRA region are Bluegrass service by Verizon. I did not flash this firmware but people claim this is same as AT&T. Yes you can flash w/o any problem.
On Edge of Galaxy
A newb here...
I am on AT&T with AT&T stock firmware G955USQU1AQC9 with March 1, 2017 security patch level after flashing T-mobile S8+ using one of the tutorials here. I am not getting OTA, device says I have the most recent firmware...
I have two concerns here:
1. If I download this and flash it using ODIN will I be able to get the July security patch via OTA?
2. Which files should I use in order to keep device as is, without loosing any data or settings?
I flashed this and did not receive the OTA update to AQG1. I am on ATT and did not change my carrier firmware. What gives? Thanks
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2
blkghost22 said:
If anybody can answer this.... what is the difference from G955USQU1AQGF and G955U1UEU1AQG2View attachment 4229126
Click to expand...
Click to collapse
There is no AQG2 firmware and we know that AQGF exists. This is huge difference.
On Edge of Galaxy
I am about to flash this file I already have everything extracted and ODIN opened.
but I see from the extracted file there is 6 files available but ODIN only has 5 slots.
Extracted are
AP, BL, CP, CSC_OYN, HOME_CSC_OYN, and user data.
but odin only has slots for
AP, BL, CP, CSC, UMS
can someone tell me what I use in each slot (besides the AP, BL, CP)
what CSC file do use for CSC slot is it CSC_OYN or Home_CSC_OYN?
EDIT: so I found that Home_CSC goes in CSC and this one is used when you don't want anything to be wiped.
CSC_OYN is used when you want to wipe.
Now just need to know what to put in UMS
The internet (4GLTE) works great but to make calls in front of people is hard to connect. Can someone help me with this problem?
When I make a call it takes awhile before it rings. Then it switches from 4G LTE to Edge then back to 4G LTE once the call is done.
Retrojayxvii said:
The internet (4GLTE) works great but to make calls in front of people is hard to connect. Can someone help me with this problem?
Click to expand...
Click to collapse
What you can do is flash an S7 edge CSC adapted to Exynos and flash it. Like in my case worked perfectly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N935K using XDA-Developers Legacy app
Do you have the CSC file . I'm looking but cant seen to find it.
mullethead666 said:
Do you have the CSC file . I'm looking but cant seen to find it.
Click to expand...
Click to collapse
I used this one on mine and it worked perfectly.
https://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911
JakkOne said:
I used this one on mine and it worked perfectly.
https://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911
Click to expand...
Click to collapse
Do you happen to have the zip file still? The link in that thread for the ported CSC doesn't have any available mirrors.
JakkOne said:
I used this one on mine and it worked perfectly.
https://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911
Click to expand...
Click to collapse
losttcp said:
Do you happen to have the zip file still? The link in that thread for the ported CSC doesn't have any available mirrors.
Click to expand...
Click to collapse
Nevermind! The link is working now!
Appreciate the info!
losttcp said:
Nevermind! The link is working now!
Appreciate the info!
Click to expand...
Click to collapse
How do you guys flash csc? I tried flashing it in twrp and doing aroma installer but keep getting a bootloop.
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
legolgel said:
What you can do is flash an S7 edge CSC adapted to Exynos and flash it. Like in my case worked perfectly.
View attachment 4270838View attachment 4270839
Sent from my SM-N935K using XDA-Developers Legacy app
Click to expand...
Click to collapse
How do you guys flash csc? I tried flashing it in twrp and doing aroma installer but keep getting a bootloop.
Maybe is because is not compatible....can't be a Snapdragon CSC, and must be compatible to the exyno
Sent from my SM-N935K using XDA-Developers Legacy app
Same here 935K on T-Mobile, flashed CSC and gets stuck in a bootloop.
I have the same version too(k) so what you have to do is: go to this website https://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911
And download the second zip Wich are portable zips for Exynos, after you download it, flash it through TWRP
Sent from my SM-N935K using XDA-Developers Legacy app
amirmaki said:
How do you guys flash csc? I tried flashing it in twrp and doing aroma installer but keep getting a bootloop.
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
How do you guys flash csc? I tried flashing it in twrp and doing aroma installer but keep getting a bootloop.
Click to expand...
Click to collapse
jaxenroth said:
Same here 935K on T-Mobile, flashed CSC and gets stuck in a bootloop.
Click to expand...
Click to collapse
I wrote this out in a different thread. Hopefully it works for you.
You can flash a ported snapdragon to Exynos CSC to your phone once you are rooted.
The zip you need is CSCSelection_N7_Ported_V1.2.zip and you can download it from this thread https://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911
I flashed the T-mobile one and it works for me. I was only getting 4mb down and now I'm getting 40mb down and I'm in Phoenix.
Your speed also depends on the band you are on and congestion on that tower.
I hope this helps you out, because this phone is awesome!
I did get it. Thx, I had to 1st Odin flash the 935S firmware, phone is the 935k, with the K firmware I had LTE with TMO but would drop to 3g for calls. So I flashed the L firmware and than TWRP, but with the L aand flashing the CSC tweak, it would just bootloop. Finally I flashed the S firmware followed by TWRP, Magisk, and CSC tweak. Now I'm all good. Also debloated with titanium and changed boot ani and shut down to the International Note 7's. Absolutely perfect now.
jaxenroth said:
I did get it. Thx, I had to 1st Odin flash the 935S firmware, phone is the 935k, with the K firmware I had LTE with TMO but would drop to 3g for calls. So I flashed the L firmware and than TWRP, but with the L aand flashing the CSC tweak, it would just bootloop. Finally I flashed the S firmware followed by TWRP, Magisk, and CSC tweak. Now I'm all good. Also debloated with titanium and changed boot ani and shut down to the International Note 7's. Absolutely perfect now.
Click to expand...
Click to collapse
I want to do this, but I don't know the proper files and versions and the CSC tweak seems hard. I wish there was a YouTube video on this. I would do it in a heartbeat. I have 2 note fe and a dead note 7 that wants revived.
---------- Post added at 12:36 AM ---------- Previous post was at 12:31 AM ----------
mullethead666 said:
I want to do this, but I don't know the proper files and versions and the CSC tweak seems hard. I wish there was a YouTube video on this. I would do it in a heartbeat. I have 2 note fe and a dead note 7 that wants revived.
Click to expand...
Click to collapse
Could you help with the steps to do this. I'm on t mobile and hate using my note fe on 3g. Would be awesome to finally have it work correctly. Any help is greatly appreciated. I've flashed with Odin back in the day . Never flashed with TWRP.
mullethead666 said:
I want to do this, but I don't know the proper files and versions and the CSC tweak seems hard. I wish there was a YouTube video on this. I would do it in a heartbeat. I have 2 note fe and a dead note 7 that wants revived.
---------- Post added at 12:36 AM ---------- Previous post was at 12:31 AM ----------
Could you help with the steps to do this. I'm on t mobile and hate using my note fe on 3g. Would be awesome to finally have it work correctly. Any help is greatly appreciated. I've flashed with Odin back in the day . Never flashed with TWRP.
Click to expand...
Click to collapse
Flash the S or K odin, than flash twrp, than flash the csc tweak zip file a few post up. Simple.
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Really?
Let's see
Well it is always speculation with firmware updates and Samsung until we actually get an update.
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Sammobile is not opening for me since yesterday using Samsung internet
Laleka said:
Sammobile is not opening for me since yesterday using Samsung internet
Click to expand...
Click to collapse
Working just fine, maybe it's your DNS, or cache? ( I use Samsung Internet Beta )
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Correct, and it will be also available for United Kingdom & Korea; date is not confirmed yet...
In the 2nd phase, registering will also be opened for Germany, Spain, France, Poland, India & China
More info will be revealed by Samsung this week...
Source: Galaxy S8 Oreo beta program will go live in these countries
@Dejan Kruljac : the only thing FAKE is your post, AND the person you admire on the GIF
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
redbullman said:
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
Click to expand...
Click to collapse
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
partcyborg said:
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
Click to expand...
Click to collapse
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
31 october 2018 i think
As 2017 nothing comes at it
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
phil.asmar said:
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
Click to expand...
Click to collapse
XEU is part of the Multi-CSC OXM (which all unbranded Europeans phones have)...
If you DON'T have a UK-SIM card, you CAN'T change your phone to XEU! A UK-SIM card must be in your device, reset it, and your CSC will change to XEU/XEU/*** (where *** is the product-code of your device)
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
redbullman said:
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
henklbr said:
redbullman said:
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
Great thanks!
Click to expand...
Click to collapse
Stock Oreo N950USQS5CRF6 Odin files for AT&T NOTE 8
***WARNING, CONTAINS BOOTLOADER V5. ONCE YOU FLASH, YOU WILL NOT BE ABLE TO DOWNGRADE TO ANY FIRMWARE CONTAINING BOOTLOADER V4 OR LOWER. YOU'VE BEEN WARNED***
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Oreo 8.0
Security Patch Level: July 1st, 2018
Product Code: ATT
PDA: N950USQS5CRF6
CSC: N950UOYN5CRF6
Download here: N950USQS5CRF6
Awesome mate thanks always good to have ???
Sent from my Samsung Galaxy S9+ using XDA Labs
So now we can flash this. Thank u
can you flash to this from CRC2?
holdthemustard said:
can you flash to this from CRC2?
Click to expand...
Click to collapse
Yes you can.
Sent from my Samsung Galaxy S9+ using XDA Labs
Venom0642 said:
Yes you can.
Sent from my Samsung Galaxy S9+ using XDA Labs
Click to expand...
Click to collapse
Can i use this on a tmobile note 8?
Sent from my [device_name] using XDA-Developers Legacy app
lildoggs said:
Can i use this on a tmobile note 8?
Click to expand...
Click to collapse
Yes you can but remember TMOBILE is not on bootloader 5 yet so if you Odin this your stuck with AT&T, till TMOBILE comes out with there v5 bootloader.
Sent from my Samsung Galaxy S9+ using XDA Labs
Venom0642 said:
Yes you can but remember TMOBILE is not on bootloader 5 yet so if you Odin this your stuck with AT&T, till TMOBILE comes out with there v5 bootloader.
Sent from my Samsung Galaxy S9+ using XDA Labs
Click to expand...
Click to collapse
Ok cool. Thankyou Venom. One more question. If I Odin this with the tmobile csc and skip the at&t csc will my phone boot back up? I don't want to brick my phone lol. God knows a fair share of us have done that in the past including me. Lmao
Sent from my [device_name] using XDA-Developers Legacy app
lildoggs said:
Ok cool. Thankyou Venom. One more question. If I Odin this with the tmobile csc and skip the at&t csc will my phone boot back up? I don't want to brick my phone lol. God knows a fair share of us have done that in the past including me. Lmao
Click to expand...
Click to collapse
Just don't add the Userdata , then go back to recovery and do a factory reset would be a fresh install.
Sent from my Samsung Galaxy S9+ using XDA Labs
Venom0642 said:
Just don't add the Userdata
Sent from my Samsung Galaxy S9+ using XDA Labs
Click to expand...
Click to collapse
You mean to flash it without any csc file?
Sent from my [device_name] using XDA-Developers Legacy app
lildoggs said:
You mean to flash it without any csc file?
Click to expand...
Click to collapse
Theres 5 tar don't flash Userdata ATT the rest you can flash and then do a factory reset after it flashes, make sure to backup your data.
Sent from my Samsung Galaxy S9+ using XDA Labs
Venom0642 said:
Theres 5 tar don't flash Userdata ATT the rest you can flash and then do a factory reset after it flashes, make sure to backup your data.
Sent from my Samsung Galaxy S9+ using XDA Labs
Click to expand...
Click to collapse
Ok great thankyou so much for your help. Let's see how it goes. I'm sure tmobile will release an update with the 5 bootloader soon. I'll just switch back if I'm having any issues.
I know that if I flash this with the homecsc it won't wipe my data but using the regular csc it will wipe data. If I flash all these including the userdata will it still wipe everything?
I have ATT Note 8, was using on Cricket. Didn't update it since I bought it because everytime it shows that the software is uptodate. The baseband is N950USQU1AQH7 which is 10 updates older than the current one.
Question is Can I flash the current update using ODIN safely? Any precaution do I need to do? I am little bit concern as I am using this Note 8 from SAmsung Device Insights program and dont want to brick the phone.
help please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mine will not work im on oreo beta so wasnt able to update i dont know what im doing wrong here
mkeric1 said:
View attachment 4567604
mine will not work im on oreo beta so wasnt able to update i dont know what im doing wrong here
Click to expand...
Click to collapse
That Odin version won't work you need to use this Odin3_v3.13.1
https://www.androidfilehost.com/?fid=5862345805528067949
Running On My Galaxy S9+ SM-G965U Wicked Venom
Venom0642 said:
That Odin version won't work you need to use this Odin3_v3.13.1
https://www.androidfilehost.com/?fid=5862345805528067949
Running On My Galaxy S9+ SM-G965U Wicked Venom
Click to expand...
Click to collapse
thanks
Deleted wrong place lol
Running On My Galaxy S9+ SM-G965U Wicked Venom
update AT&T Note 8 with unbranded SW version
Venom0642 said:
Deleted wrong place lol
Running On My Galaxy S9+ SM-G965U Wicked Venom
Click to expand...
Click to collapse
HI Guys.
i need to flash my AT&T Note 8 N950U with unbranded version of software and want to use it for india region ( possibility to use samsung pay).
Can you please point me to procedure and related files to download and flash my phone.?
at present i am on N950USQS4CRE1..
thanks in advance
can any one provide these files with homecsc cuz i dont want to wipe my data and start all over again. thanks