Odin fails to root after recovery.img - Galaxy S 5 Q&A, Help & Troubleshooting

I've been searching for 3 days now and I haven't seen anyone with the same problem. I've tried everything I can think of. I have disabled reactivation lock. Every time I see someone with the same error the problem is they need to disable reactivation lock and it always works.
Here's the error I get:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltevzw-kltevzw-smg900v.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I Have tried every single USB port on my computer, and it still doesn't work. I have NO idea what to do!
(I have SM-G900V and I'm using CF-Auto-root)

SM-G900V has a locked bootloader by default.
It does not accept custom recovery.
have NO idea what to do!
Click to expand...
Click to collapse
Have a look at the section devoted to SM-G900V.

Related

[Solved] Help fast please i got stuck in odin

I downloaded the new firmware from sammobile. Everything was ok but then odin got stucked in system.img and after a while it said that it had failed. What should i do now?
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUBMG1_I9500UUBBMG1_I9500UBUBMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Read ..
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I could find the solution myself, sorry for creating the thread i was in real panic. Aparently kies was interrupting odin, lesson learned. I should have uninstalled kies before.
Gab! said:
I downloaded the new firmware from sammobile. Everything was ok but then odin got stucked in system.img and after a while it said that it had failed. What should i do now?
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUBMG1_I9500UUBBMG1_I9500UBUBMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Read ..
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Since Its done in the thread make it solved in the bracket it will help others too
.
did you check the md5 checksum on that? perhaps it's a bad download..
also, you should tick debug

NOTE 4 SM-G910S bootloop after attempt to use CF-autoroot

Hello, my phone stocked on bootloop and i try to flash it to stock firmware and odin fails
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also try to factory reset it and it is still in bootloop
Please someone help me. Thanks a lot
louellgat said:
Hello, my phone stocked on bootloop and i try to flash it to stock firmware and odin fails
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also try to factory reset it and it is still in bootloop
Please someone help me. Thanks a lot
Click to expand...
Click to collapse
Hi,
I have reported this thread to be moved to the right Q & A section where you might be able to get help quickly.
Good luck.

Frp lock on s6 edge+ g928w8

I restarted my phone and it went into FRP lock. I can only access download mode and do not have access to recovery. I have tried downloading stock firmware using Odin but it fails every time. When ever I download something from Odin I get this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On top of that my phone says "root check fail : (Bootloader)"
Any suggestions on how I can get into my phone!?
have you tried using smartswitch when in download mode and try the reinstall feature?
Natherul said:
have you tried using smartswitch when in download mode and try the reinstall feature?
Click to expand...
Click to collapse
Do I have to be in Download mode in order for Smartswitch to register my phone?
Nabeez said:
Do I have to be in Download mode in order for Smartswitch to register my phone?
Click to expand...
Click to collapse
well if you cant boot into system I imagine you need to be in download mode to begin with yes.
Natherul said:
well if you cant boot into system I imagine you need to be in download mode to begin with yes.
Click to expand...
Click to collapse
SmartSwitch didn't work

Help with flashing stock firmware over re-activation locked Samsung SM-G900A

Hey guys, I'm trying to reinstall stock firmware on to device so I can bypass the Reactivation Lock but I'm having a bit of trouble, I keep continually getting the error SYS REV CHECK FAIL[S[ : Refer 3 > Binary 1. I've tried doing everything I could find and nothing has helped, does anyone have any insight, thanks! Also here's the LOG from ODIN
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

both my ON5's (SM-G550T & SM-G550T1) stuck on Custom binary Blocked by FRP lock!!

I cant seem to figure out how to fix this issue... "Custom Binary Blocked by FRP lock." The firmware I used to bypass the account verification originally fail in odin now.. and then the phone says "Secure Check Fail: (Bootloader)" while in download mode.
And here's the log from odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G5500ZCU1APK1_G5500CHC1APK1_G5500ZCU1APK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Has anyone else had this issue..??
fixed it with these updato. com/firmware-archive-select-model?exact=1&q=SM-G550T1

Categories

Resources