Related
Ok so i have a question, i have an older sister up in a different state and my dad bought her a brand new epic for xmas. Its not activated yet til she gets it obviously so i was wondering:
1. if i sent it to her rooted so i can give her mobile ap and custom kernal all that fun stuff, will sprint know anything if they are just transfering contacts from her old sanyo pink regular phone?
2. Can it be rooted before activation?
Would Greatly appreciate someones insights,
Thanks
I don't know about sprint but it doesnt effect verizon. All it is is cellbrite
Sent from my Samsung-SPH-D700 using Tapatalk
Sprint uses cellbrite as well and so does best buy
Sent from my SPH-D700 using XDA App
only thing about rooting her device and putting all the cool stuff on it is... she's going to have to do all the updates manually. do you trust your sister to do that? if so, go crazy. i sent my brother a pre rooted EVO and he's still running 2.29something. doubt he'll ever make it because he doesn't have the patience to sit on aim with me while i walk him through it and he's dumb as a brick (too dumb to brick it, even)
butttt i work at a sprint store and i'd ask her about her mod and which one it was.. i wouldn't report her or anything.. in fact, there is no protocol to do so. they just don't support the devices - eg. you wont get her screen replaced if bad software killed it under warranty if they can find evidence of tampering with the software
lol but i would support it. then again, im here
tphillips78 said:
Sprint uses cellbrite as well and so does best buy
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
enispenvy said:
only thing about rooting her device and putting all the cool stuff on it is... she's going to have to do all the updates manually. do you trust your sister to do that? if so, go crazy. i sent my brother a pre rooted EVO and he's still running 2.29something. doubt he'll ever make it because he doesn't have the patience to sit on aim with me while i walk him through it and he's dumb as a brick (too dumb to brick it, even)
butttt i work at a sprint store and i'd ask her about her mod and which one it was.. i wouldn't report her or anything.. in fact, there is no protocol to do so. they just don't support the devices - eg. you wont get her screen replaced if bad software killed it under warranty if they can find evidence of tampering with the software
lol but i would support it. then again, im here
Click to expand...
Click to collapse
U mean the 2.2 update? i dont think she will care that much honestly.
i know i will tell her how to flash stock stuff and ill do it for her or tell her bf to do the stock flash.
so if she is just getting contacts transfered they shouldnt give her any trouble if its rooted, i mean it will look stock. just have mobile ap on it.
davidrules7778 said:
U mean the 2.2 update? i dont think she will care that much honestly.
i know i will tell her how to flash stock stuff and ill do it for her or tell her bf to do the stock flash.
so if she is just getting contacts transfered they shouldnt give her any trouble if its rooted, i mean it will look stock. just have mobile ap on it.
Click to expand...
Click to collapse
It should have no bearing when transferring contacts. There are programs u can download to do that for her as well
tphillips78 said:
It should have no bearing when transferring contacts. There are programs u can download to do that for her as well
Click to expand...
Click to collapse
Oh ones that can get them from a sanyo regular phone to the computer or what? Which apps would work?
Anyone got any answer about rooting b4 activation? Will it still activate if it's rooted?
davidrules7778 said:
Oh ones that can get them from a sanyo regular phone to the computer or what? Which apps would work?
Anyone got any answer about rooting b4 activation? Will it still activate if it's rooted?
Click to expand...
Click to collapse
There is numerous ones out there just Google transferring phonebook software. I can't remember what I used to have when I worked for T-Mobile something along the lines of Data Pilot I think but don't quote me. Not sure about the rooting question though. I've had the opportunity to root before activating. If you do root before you activate and it does work let me know for future reference please and thank you.
I found it easier to manage my contacts via Google Contacts instead of trying to clean up transferred data from my 4 year old flip phone.
What I did in Google Contacts:
Created a new group labeled "Android"
Cleaned up, added, removed contacts (Initial cleanup took 2 hours, subsequent cleanup is now only 1 minute.)
Assigned the "Android" group to those I wanted in my contact list in the phone.
What I did in the phone itself:
Went into the contact preferences and selected "only show contacts with #s"
Deselected all of the groups from Google Contacts and only selected "Android" to sync
Then I linked Facebook to my phone to allow the auto-sync (for contact photos)
Finally I manually attached FB accounts to contacts that didn't auto-sync
When I want to add a new number, I add it to my Google account from the phone's contact manager, then later just add the "Android" group via the Google Contacts website.
This was the easiest method I found to keep my contact list clutter free, while still utilizing Google Contacts to it's full potential.
As I have been flashing ROMs I've noticed many come with the Phone.apk. My Tab is a tablet, and not a phone so I want to remove it all. But when I tried to through adb it renders my data service useless. So would someone please tell me exactly how this is done?
Strange that you want to delete it
You could take a custom launcher and hide it from the drawer.
Sent from my MoDaCo R1 GT-P1000 using XDA App
I don't see how.. I have a phone to make calls from. I have a tablet for web browsing.
I'm not wanting to hide it though. I want to remove it.
As far as I know the only way to fully remove the dialer functionality would be to cook your own rom without it. The only other thing I can think of is maybe taking the phone.apk from a standard tmo build and using that (I am fairly sure the default build still has a phone.apk as to my knowledge it is needed for radio services to function). Having said that I use mine as a phone so not gonna mess around to test it myself and my apologies if it doesn't/wont work. As a side note phone.apk is less then 4mb not sure why it would be a huge concern.
Sent from my GT-P1000 using Tapatalk
charliebrown1321 said:
As far as I know the only way to fully remove the dialer functionality would be to cook your own rom without it. The only other thing I can think of is maybe taking the phone.apk from a standard tmo build and using that (I am fairly sure the default build still has a phone.apk as to my knowledge it is needed for radio services to function). Having said that I use mine as a phone so not gonna mess around to test it myself and my apologies if it doesn't/wont work. As a side note phone.apk is less then 4mb not sure why it would be a huge concern.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
My contacts app has the dialer in it. And on some ROMs I get a voicemail notification. I suppose I could find a contacts apk without it. But if I'm going through all that I might as well get rid of the whole thing. I just don't see the reason behind needing to use a tablet as a phone, you know?
Stevenjcarney said:
My contacts app has the dialer in it. And on some ROMs I get a voicemail notification. I suppose I could find a contacts apk without it. But if I'm going through all that I might as well get rid of the whole thing. I just don't see the reason behind needing to use a tablet as a phone, you know?
Click to expand...
Click to collapse
The "simple" solution would be to go back to your stock ROM, but that's likely not really an acceptable solution as the performance of the stock ROMs tends to be pretty poor in comparison to the later development builds.
So, you are likely to be left with removing or replacing certain components from your desired ROM with the stock TMo variants (as has been previously mentioned) on a trial and error basis to determine what works and what does not. It's doubtful that you'll find anyone who can tell you *exactly* what you want to do, because it seems that most US Tabs users are looking to re-enable the phone functionality that was artificially crippled by the US carriers.
I seldom use my Tabs phone functionality, but I have used it (makes a great speakerphone for conference calls!), and I would always rather have more functionality than less.
Regards,
Dave
So I'm entirely new at this. I've had my S4 for a while but just recently decided to root it. It is a NC1 AT&T S4 so I used safe strap to install Chaos ROM. After the install I put in the APN settings and all was good... until I went to make a phone call and went on a "apphunt" to no avail. Now after countless hours (actually like 4-5) I've decided to seek the knowledge of the vast XDA community. Any help will be much appreciated. If you need more info please just ask.
Are you sure the rom is for the AT&T version of the s4?
Yeah, I researched to make sure. I can make calls from the Contacts/People app and can receive them. I just can't look at my call log or dial a number in.
Anyone?
Try installing a third party dialer like Dialer+ from the playstore.
Thanks, I'll probably just do that.
Hey, any of you root people, could you pull the voicemail apk off your phone so I can use it with my flashed universal phone? Have tried the s6 edge software but no go. Thank you
This is simple through titanium backup. No one?
The one on official firmware will not install correctly. But this is an older one that works. Download and install like normal.
https://mega.nz/#!z5sAiJKK!Ig_iEGEqYMTXfm-yRPmvsC05pgiKYlEPvonlpqXuVwk
It work for you on the U firmware?
heathmcabee said:
It work for you on the U firmware?
Click to expand...
Click to collapse
Yes.
Thanks again seems to be working
Once you set up, it may take a while to actually activate. I just left the app, came back to it 5-10 min later, and it was running normally.
Ya took me almost an hr. Worked well though. Downloaded many that didn't work. Just needed 1 that did.
It doesn't appear to actually work. You all just think it is.
If you leave a vm it wont download it (or mine doesn't seem to).
If you go into settings and pref, it shows it's not verified still also. You just stopped seeing the prompt because once the screen times out it is no longer on top but if you fully kill the app and re-open it still says verifying.
These are my findings at least? If you go into settings and pref does it say you're verified?
Yeah I couldn't get it to work either
Didn't work for me either
Try this one it worked for me on my unbranded piece o sh!t locked bootloader s7 edge with the added ticking timebomb feature.
Link vvm
On a side note samsung got what they deserve for [email protected] us usa s7 owners. I hope they lose tons of money
brendan802 said:
Try this one it worked for me on my unbranded piece o sh!t locked bootloader s7 edge with the added ticking timebomb feature.
Link vvm
On a side note samsung got what they deserve for [email protected] us usa s7 owners. I hope they lose tons of money
Click to expand...
Click to collapse
No dice, didn't work for me either... Did you do anything special to install it?
brendan802 said:
Try this one it worked for me on my unbranded piece o sh!t locked bootloader s7 edge with the added ticking timebomb feature.
Link vvm
On a side note samsung got what they deserve for [email protected] us usa s7 owners. I hope they lose tons of money
Click to expand...
Click to collapse
Thanks seemed to work. Finally got account verification
heathmcabee said:
Thanks seemed to work. Finally got account verification
Click to expand...
Click to collapse
Are you sure?
I've got the same issues all the others did. It can't activate. Just because it stops popping it up doesn't mean it's activated now either. That message suppresses after a while.
It seems to tie into something that it and Sprint Zone use from what I can tell and thus why won't work on these non-branded firmwares.
Leave yourself a VM and see if it shows up...
It usually wouldn't go past the account verification at all. I'm not 100 %sure yet. But it did go farther than before and I'm trying it out now to verify. Will get back
If you press home and go back into it the app will hide the message but it still wont work.
I actually found the outbound activation messages in it that are failing to send even.
So this is another bust.
I think our best luck is if someone can either reverse eng. this thing to modify it to not try to use whatever sprint bloat it's looking for or we find what it's looking for and find a way to put it on our phones.
Sadly it's not a new issue. All the Nexus people have had the issue from day 1. And it seems to be only sprint because they won't make a darn public compatible app.
I can't use GVoice as I already use it for a second number and I don't like any of the third party ones that make you use conditional call forwarding to them to do this...
Another question for you all. I've noticed if NO voicemail app is installed I do not get any notification I have voicemails. If I do install one (despite it not working) I get notified because it says pending voicemail download at least.
With no VM App installed are your phones telling you that you got VM?
Yeah same boat here man. Looks like we beating a dead horse
Yea, Sprint should upload visual voicemail to the Play Store like T-Mobile does. So stupid.
Sent from my SM-G935U using Tapatalk
Can anyone post the Sprint VM app for Nougat?
Sent from my SM-G935U using Tapatalk
SO SORRY FOR THE LONG POST!!
Hey guys, I've been a long time fan of this site, but have never posted anything. I've been using Samsung phones forever and when Smart Call was added, it was the best. For those who don't know, Smart Call is a Built In feature that integrates with the dialer/ caller Id to help mitigate Spam calls and fraud calls. Its ABSOLUTELY free and works. I have the US Cellular S10+ and this free feature on my $1k phone has been disabled to push their paid feature called Call Guardian on us as well as other carriers doing the same. I can open system files and see that the "program" is there, but like I said it's been disabled somehow through software. This site is home to some of the smartest people out there. Have any of you guys found a way to enable features that Carriers have disabled without flashing (I'd love to but I'm scared I'd brick it). Any ideas or advice would be awesome! Thank you
Jstanley417 said:
SO SORRY FOR THE LONG POST!!
Hey guys, I've been a long time fan of this site, but have never posted anything. I've been using Samsung phones forever and when Smart Call was added, it was the best. For those who don't know, Smart Call is a Built In feature that integrates with the dialer/ caller Id to help mitigate Spam calls and fraud calls. Its ABSOLUTELY free and works. I have the US Cellular S10+ and this free feature on my $1k phone has been disabled to push their paid feature called Call Guardian on us as well as other carriers doing the same. I can open system files and see that the "program" is there, but like I said it's been disabled somehow through software. This site is home to some of the smartest people out there. Have any of you guys found a way to enable features that Carriers have disabled without flashing (I'd love to but I'm scared I'd brick it). Any ideas or advice would be awesome! Thank you
Click to expand...
Click to collapse
Other than flashing the U1 firmware that's about it. Since it's a system app that's disabled by your carrier's csc configuration that's your only option.
Thank you for the quick response. That was what I was afraid of. Im pretty tech savvy so I believe I could, it's just I've never attempted to flash a phone before. I've looked online for some how-to info on flashing. Do you have any that you would recommend being a newbie to it?
Jstanley417 said:
Thank you for the quick response. That was what I was afraid of. Im pretty tech savvy so I believe I could, it's just I've never attempted to flash a phone before. I've looked online for some how-to info on flashing. Do you have any that you would recommend being a newbie to it?
Click to expand...
Click to collapse
There is a decent set of instructions here, just ignore step 1 and the fact it's for a different model. Download the modified Odin and U1 branded firmware from this post. Other than that it's pretty much self explanatory. Use your original charging cable to connect your phone to the PC and if you get stuck ask for help in the thread I linked. That's your best bet.
EDIT: Smart Call has a bug too. It disables when you restart your phone sometimes so you will need to re-enable it in the settings menu.
Thank you so much for taking the time to help me!
It's not on the unlocked F either. I was very dissappointed.
I have unlocked s10 sd but I have to re-enable the spam caller ID toggle after every reboot for some reason.
Shuthefrontdoor said:
I have unlocked s10 sd but I have to re-enable the spam caller ID toggle after every reboot for some reason.
Click to expand...
Click to collapse
Me too...
subguy812 said:
Me too...
Click to expand...
Click to collapse
Me 3 x
Sent from my [device_name] using XDA-Developers Legacy app
Same here, gotta re-enable it after a reboot. Weird little pesky bug.
Jstanley417 said:
SO SORRY FOR THE LONG POST!!
Hey guys, I've been a long time fan of this site, but have never posted anything. I've been using Samsung phones forever and when Smart Call was added, it was the best. For those who don't know, Smart Call is a Built In feature that integrates with the dialer/ caller Id to help mitigate Spam calls and fraud calls. Its ABSOLUTELY free and works. I have the US Cellular S10+ and this free feature on my $1k phone has been disabled to push their paid feature called Call Guardian on us as well as other carriers doing the same. I can open system files and see that the "program" is there, but like I said it's been disabled somehow through software. This site is home to some of the smartest people out there. Have any of you guys found a way to enable features that Carriers have disabled without flashing (I'd love to but I'm scared I'd brick it). Any ideas or advice would be awesome! Thank you
Click to expand...
Click to collapse
So, I've made a post on the Sprint Community Forum concerning this Smart Call lockout. I'm doing a mix of looking like I tried to research the issue and also rather pointedly not sounding like someone who was installing ROM's on Windows Mobile devices over a decade ago in the hopes that someone at Sprint will promise something they probably shouldn't in print. Maybe they'll get the point that this anti-competitive crap isn't going to fly forever.
For whatever it's worth, the unlocked Canadian version we bought at Best Buy has that feature available and it has remained enabled since first setting up the phone. Couldn't tell you the csc, but a heads up in the event it happens to be helpful somehow.