Since yesterday my YotaPhone 2 bricked. It is YD206, bought from China. I did nothing special - AlwaysOnDisplay kind of hanged up (with some artefacts on it ) and after I went to reboot it just went into boot loop. It was with marshmallow (I bought it that way - used). I tried power and vol+ - it just continues to restart and shows Powered by Android pic. Now I can only put it in download mode (power and vol-). Tried to flash it with yota-flash and 4.4.3-S01-003-CN1.0.3.32a.zip firmware - no success. Everything went just fine, but it reboots again shows powered by Android and in some time phone reboots and shows the same. I succeeded to load TWRP Recovery (twrp-v5.img). I wiped it out - no change at all. I tried to flash the system.img with different sizes - still no luck.
Guys, I'm really stuck here, so any help is appreciated! Cheers
I think, I'm experiencing the exact same issue with my YotaPhone YD206. It was on the 5.0.0-RU-1.1.134 firmware before the blackout happened.
This is a description of the issue on my side. Could you please confirm if it is the case with yours? I read many threads but found no solution.
The EPD display is stuck on the same screen from the weather widget.
After powering off the device, it shows the "Powered by android" logo and ends in an endless bootloop (auto-restarting each 10 minutes).
The phone can be put into the "Downloading Mode" without problem, and fastboot can also detect it:
Code:
C:\Program Files (x86)\yotaphone_flasher\fastboot devices
55554735 fastboot
Flashing the original CN firmware succeed, no errors to see
Code:
target reported max download size of 2147483648 bytes
sending 'aboot' (892 KB)...
OKAY [ 0.031s]
writing 'aboot'...
OKAY [ 0.031s]
finished. total time: 0.063s
target reported max download size of 2147483648 bytes
sending 'boot' (12760 KB)...
OKAY [ 0.406s]
writing 'boot'...
OKAY [ 0.281s]
finished. total time: 0.688s
target reported max download size of 2147483648 bytes
erasing 'system'...
OKAY [ 0.281s]
sending 'system' (846110 KB)...
OKAY [ 27.410s]
writing 'system'...
OKAY [ 25.646s]
finished. total time: 53.337s
target reported max download size of 2147483648 bytes
sending 'recovery' (13308 KB)...
OKAY [ 0.438s]
writing 'recovery'...
OKAY [ 0.297s]
finished. total time: 0.734s
target reported max download size of 2147483648 bytes
erasing 'cache'...
OKAY [ 0.031s]
sending 'cache' (18800 KB)...
OKAY [ 0.594s]
writing 'cache'...
OKAY [ 0.484s]
finished. total time: 1.109s
target reported max download size of 2147483648 bytes
sending 'modem' (57545 KB)...
OKAY [ 1.847s]
writing 'modem'...
OKAY [ 1.250s]
finished. total time: 3.097s
target reported max download size of 2147483648 bytes
sending 'sbl1' (280 KB)...
OKAY [ 0.016s]
writing 'sbl1'...
OKAY [ 0.031s]
finished. total time: 0.047s
target reported max download size of 2147483648 bytes
sending 'rpm' (191 KB)...
OKAY [ 0.000s]
writing 'rpm'...
OKAY [ 0.016s]
finished. total time: 0.016s
target reported max download size of 2147483648 bytes
sending 'tz' (325 KB)...
OKAY [ 0.016s]
writing 'tz'...
OKAY [ 0.016s]
finished. total time: 0.031s
target reported max download size of 2147483648 bytes
sending 'aboot' (892 KB)...
OKAY [ 0.031s]
writing 'aboot'...
OKAY [ 0.031s]
finished. total time: 0.063s
Would you like to flash userdata[Y/N]:
First of all 10x for your reply!
1>>> AlwaysOnDisplay of my phone stuck on a page of a book I was reading.
2>>> Same here: After powering off the device, it shows the "Powered by android" logo and ends in an endless bootloop
3>>> Yes, the phone can be put into the "Downloading Mode" without problem, and fastboot can also detect it:
4>>> All flashing attempts went without any error. I tried with CN, RU and APC fimwares. Tonight Im gonna try with HK. I even tried manually to flash every partition with fastboot (https://forum.xda-developers.com/yotaphone-one/help/y2-bootloop-to-recovery-t3509883) - still the same result. Tried to install the official Marshmallow through TWRP - no luck at all. Tomorrow gonna open the phone and disconnect the battery for a while - will post here what the result is.
The interesting part is that installing TWRP is not possible on all firmwares uploaded on a phone. It works for sure with 4.4.3-S01-003-CN1.0.3.01a
Cheers!
Hi and thanks for your reply!
By the way: Are you able to boot it into recovery? Mine can't.
angelll123 said:
First of all 10x for your reply!
1>>> AlwaysOnDisplay of my phone stuck on a page of a book I was reading.
2>>> Same here: After powering off the device, it shows the "Powered by android" logo and ends in an endless bootloop
3>>> Yes, the phone can be put into the "Downloading Mode" without problem, and fastboot can also detect it:
4>>> All flashing attempts went without any error. I tried with CN, RU and APC fimwares. Tonight Im gonna try with HK. I even tried manually to flash every partition with fastboot (https://forum.xda-developers.com/yotaphone-one/help/y2-bootloop-to-recovery-t3509883) - still the same result. Tried to install the official Marshmallow through TWRP - no luck at all. Tomorrow gonna open the phone and disconnect the battery for a while - will post here what the result is.
The interesting part is that installing TWRP is not possible on all firmwares uploaded on a phone. It works for sure with 4.4.3-S01-003-CN1.0.3.01a
Cheers!
Click to expand...
Click to collapse
veeblefetzer said:
Hi and thanks for your reply!
By the way: Are you able to boot it into recovery? Mine can't.
Click to expand...
Click to collapse
I can't boot into its custom recovery - pwr & vol+ do nothing. But I am able to do it with twrp (put it in Downloading... mode and then <<fastboot boot twrp-v5.img>>) (for twrp image look here: https://forum.xda-developers.com/yotaphone-one/help/guide-everything-to-yotaphone2-t3547194.
Code:
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe boot twrp-v5.img
downloading 'boot.img'...
OKAY [ 0.497s]
booting...
OKAY [ 0.020s]
finished. total time: 0.517s
After that it loads TWRP 3.2.0 by itself.
Note that with my phone it works only with CN firmwares. Right now with 4.4.3-S01-003-CN1.0.3.32a). Best regards!
No luck again - I disconnected YP2's battery for some time, but the phone still acts as before. I plan to test all available CN firmwares and to use 'fastboot -S' command for system.img with 512M chunks and 256M chunks. Will let you know if there is any progress. Cheers!
I've run out of ideas and I'm thinking about to return it to GearBest.
Thanks anyway for the updates and the work!
angelll123 said:
No luck again - I disconnected YP2's battery for some time, but the phone still acts as before. I plan to test all available CN firmwares and to use 'fastboot -S' command for system.img with 512M chunks and 256M chunks. Will let you know if there is any progress. Cheers!
Click to expand...
Click to collapse
Hi guys, as far as I remember when playing around with flashing my yotaphone is that sometimes it makes a difference if you first erase and also that the yotaflasher tool does not always do this completely correctly.
So sadly it is better to understand what is going on, then do it yourself and tweak it until it works.
I used my own scripts so I could control what was being flashed instead of having to always flash everything.
So try extracting the firmware yourself and then flashing every part with an executable bat file.
Userdata should be erased also to make it work, so try to get a backup for that first if you can.
here are the scripts that I used:
To make this work, you need to extract the zip file manually to the firmware folder of your yota_flasher folder and put the bat script also in the yota_flasher folder.
Code:
fastboot.exe flash modem firmware\radio\NON-HLOS.bin
fastboot.exe flash modem firmware\radio\NON-HLOS.bin
fastboot.exe flash rpm firmware\radio\rpm.mbn
fastboot.exe flash rpm firmware\radio\rpm.mbn
fastboot.exe flash tz firmware\radio\tz.mbn
fastboot.exe flash tz firmware\radio\tz.mbn
fastboot.exe flash sbl1 firmware\radio\sbl1.mbn
fastboot.exe flash sbl1 firmware\radio\sbl1.mbn
fastboot.exe flash aboot firmware\emmc_appsboot.mbn
fastboot.exe flash aboot firmware\emmc_appsboot.mbn
fastboot.exe flash recovery firmware\recovery.img
fastboot.exe flash recovery firmware\recovery.img
fastboot.exe flash boot firmware\boot.img
fastboot.exe flash boot firmware\boot.img
fastboot.exe erase system
fastboot.exe flash system firmware\system.img
fastboot.exe erase userdata
fastboot.exe flash userdata firmware\userdata.img
fastboot.exe flash persist firmware\persist.img
fastboot.exe flash persist firmware\persist.img
fastboot.exe flash cache firmware\cache.img
fastboot.exe flash cache firmware\cache.img
pause
Edit: fixed some badly copy pasted edited code
Edit: Changed code to flash most files 2 times just to be sure.
tomgaga said:
Hi guys, as far as I remember when playing around with flashing my yotaphone is that sometimes it makes a difference if you first erase and also that the yotaflasher tool does not always do this completely correctly.
So sadly it is better to understand what is going on, then do it yourself and tweak it until it works.
I used my own scripts so I could control what was being flashed instead of having to always flash everything.
So try extracting the firmware yourself and then flashing every part with an executable bat file.
Userdata should be erased also to make it work, so try to get a backup for that first if you can.
here are the scripts that I used:
To make this work, you need to extract the zip file manually to the firmware folder of your yota_flasher folder and put the bat script also in the yota_flasher folder.
fastboot.exe flash modem firmware\radio\NON-HLOS.bin
fastboot.exe erase modemst1
fastboot.exe erase modemst2
fastboot.exe flash fsg firmware\radio\fsg.mbn
fastboot.exe flash tz firmware\radio\tz.mbn
fastboot.exe flash sbl1 firmware\radio\sbl1.mbn
fastboot.exe erase aboot
fastboot.exe flash aboot firmware\emmc_appsboot.mbn
fastboot.exe erase recovery
fastboot.exe flash aboot firmware\recovery.img
fastboot.exe flash boot firmware\boot.img
fastboot.exe erase system
fastboot.exe flash system firmware\system.img
fastboot.exe erase userdata
fastboot.exe flash userdata firmware\userdata.img
pause
Click to expand...
Click to collapse
10x for the reply, but I still have no luck. YotaPhone continues to act like a brick. All of bat file commands end with status OKAY, still phone goes into boot loop. Just one little correction:
Code:
fastboot.exe flash aboot firmware\recovery.img
should be:
Code:
fastboot.exe flash recovery firmware\recovery.img
Cheers mate!
[/COLOR]
angelll123 said:
10x for the reply, but I still have no luck. YotaPhone continues to act like a brick. All of bat file commands end with status OKAY, still phone goes into boot loop. Just one little correction:
Code:
fastboot.exe flash aboot firmware\recovery.img
should be:
Code:
fastboot.exe flash recovery firmware\recovery.img
Cheers mate!
Click to expand...
Click to collapse
Which firmware have you tried and where did you get it?
and I also added a line to erase the cache
Code:
fastboot.exe erase cache
you did that too right?
And regarding recovery, with marshmellow with twrp ( found here: https://forum.xda-developers.com/showpost.php?p=70206915&postcount=49), i noticed that you have to release the power button when the phone shows the android logo while still holding the vol-up until it goes into recovery. So procedure is to reboot the phone by or while holding power+vol-up buttons and then release the power button when the android - text shows but keep holding vol-up.
Thanks guys!
Same here. All of fastboot commands end with status OKAY (including erase cache), but the phone still stuck at boot.
I tried with the Chinese firmware, version: 4.4.3-S01-003-CN1.0.3.32a, which I downloaded from ftp://fw.ydevices.com/ while the site was still alive.
The content of the firmware:
Code:
C:\Program Files (x86)\yotaphone_flasher\firmware>tree /F
Folder PATH listing
Volume serial number is 0000008B 09A6:99FE
C:.
¶ boot.img
¶ cache.img
¶ dt.img
¶ emmc_appsboot.mbn
¶ emmc_appsboot.raw
¶ persist.img
¶ ramdisk-recovery.img
¶ ramdisk.img
¶ recovery.img
¶ system.img
¶ userdata.img
¶
+---radio
NON-HLOS.bin
rpm.mbn
sbl1.mbn
tz.mbn
And I had to change this:
Code:
fastboot.exe flash fsg firmware\radio\fsg.mbn
To:
Code:
fastboot.exe flash rpm firmware\radio\rpm.mbn
since firmware\radio\fsg.mbn does not exist in 4.4.3-S01-003-CN1.0.3.32a.
Complete batch output:
Code:
C:\Program Files (x86)\yotaphone_flasher>flash_yota.bat
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash modem firmware\radio\NON-HLOS.bin
target reported max download size of 2147483648 bytes
sending 'modem' (57545 KB)...
OKAY [ 1.813s]
writing 'modem'...
OKAY [ 1.234s]
finished. total time: 3.047s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase modemst1
erasing 'modemst1'...
OKAY [ 2.610s]
finished. total time: 2.610s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase modemst2
erasing 'modemst2'...
OKAY [ 2.594s]
finished. total time: 2.594s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash rpm firmware\radio\rpm.mbn
target reported max download size of 2147483648 bytes
sending 'rpm' (191 KB)...
OKAY [ 0.016s]
writing 'rpm'...
OKAY [ 0.016s]
finished. total time: 0.031s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash tz firmware\radio\tz.mbn
target reported max download size of 2147483648 bytes
sending 'tz' (325 KB)...
OKAY [ 0.031s]
writing 'tz'...
OKAY [ 0.016s]
finished. total time: 0.047s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash sbl1 firmware\radio\sbl1.mbn
target reported max download size of 2147483648 bytes
sending 'sbl1' (280 KB)...
OKAY [ 0.000s]
writing 'sbl1'...
OKAY [ 0.031s]
finished. total time: 0.031s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase aboot
erasing 'aboot'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash aboot firmware\emmc_appsboot.mbn
target reported max download size of 2147483648 bytes
sending 'aboot' (892 KB)...
OKAY [ 0.031s]
writing 'aboot'...
OKAY [ 0.031s]
finished. total time: 0.063s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase recovery
erasing 'recovery'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash recovery firmware\recovery.img
target reported max download size of 2147483648 bytes
sending 'recovery' (13308 KB)...
OKAY [ 0.484s]
writing 'recovery'...
OKAY [ 0.313s]
finished. total time: 0.797s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash boot firmware\boot.img
target reported max download size of 2147483648 bytes
sending 'boot' (12760 KB)...
OKAY [ 0.453s]
writing 'boot'...
OKAY [ 0.281s]
finished. total time: 0.734s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase system
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.281s]
finished. total time: 0.281s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash system firmware\system.img
target reported max download size of 2147483648 bytes
erasing 'system'...
OKAY [ 0.031s]
sending 'system' (846110 KB)...
OKAY [ 26.798s]
writing 'system'...
OKAY [ 25.611s]
finished. total time: 52.440s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 0.469s]
finished. total time: 0.469s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash userdata firmware\userdata.img
target reported max download size of 2147483648 bytes
erasing 'userdata'...
OKAY [ 0.188s]
sending 'userdata' (141162 KB)...
OKAY [ 4.453s]
writing 'userdata'...
OKAY [ 3.828s]
finished. total time: 8.469s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.047s]
finished. total time: 0.062s
C:\Program Files (x86)\yotaphone_flasher>pause
Press any key to continue . . .
tomgaga said:
[/COLOR]
Which firmware have you tried and where did you get it?
and I also added a line to erase the cache
Code:
fastboot.exe erase cache
you did that too right?
And regarding recovery, with marshmellow with twrp ( found here: https://forum.xda-developers.com/showpost.php?p=70206915&postcount=49), i notice that it is not so easy to get it into recovery sometimes using the button-combination, sometimes I have to wait till the android logo appears to press and hold power+volup.
Click to expand...
Click to collapse
veeblefetzer said:
Thanks guys!
Same here. All of fastboot commands end with status OKAY (including erase cache), but the phone still stuck at boot.
I tried with the Chinese firmware, version: 4.4.3-S01-003-CN1.0.3.32a, which I downloaded from ftp://fw.ydevices.com/ while the site was still alive.
The content of the firmware:
Code:
C:\Program Files (x86)\yotaphone_flasher\firmware>tree /F
Folder PATH listing
Volume serial number is 0000008B 09A6:99FE
C:.
¶ boot.img
¶ cache.img
¶ dt.img
¶ emmc_appsboot.mbn
¶ emmc_appsboot.raw
¶ persist.img
¶ ramdisk-recovery.img
¶ ramdisk.img
¶ recovery.img
¶ system.img
¶ userdata.img
¶
+---radio
NON-HLOS.bin
rpm.mbn
sbl1.mbn
tz.mbn
And I had to change this:
Code:
fastboot.exe flash fsg firmware\radio\fsg.mbn
To:
Code:
fastboot.exe flash rpm firmware\radio\rpm.mbn
since firmware\radio\fsg.mbn does not exist in 4.4.3-S01-003-CN1.0.3.32a.
Complete batch output:
Code:
C:\Program Files (x86)\yotaphone_flasher>flash_yota.bat
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash modem firmware\radio\NON-HLOS.bin
target reported max download size of 2147483648 bytes
sending 'modem' (57545 KB)...
OKAY [ 1.813s]
writing 'modem'...
OKAY [ 1.234s]
finished. total time: 3.047s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase modemst1
erasing 'modemst1'...
OKAY [ 2.610s]
finished. total time: 2.610s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase modemst2
erasing 'modemst2'...
OKAY [ 2.594s]
finished. total time: 2.594s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash rpm firmware\radio\rpm.mbn
target reported max download size of 2147483648 bytes
sending 'rpm' (191 KB)...
OKAY [ 0.016s]
writing 'rpm'...
OKAY [ 0.016s]
finished. total time: 0.031s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash tz firmware\radio\tz.mbn
target reported max download size of 2147483648 bytes
sending 'tz' (325 KB)...
OKAY [ 0.031s]
writing 'tz'...
OKAY [ 0.016s]
finished. total time: 0.047s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash sbl1 firmware\radio\sbl1.mbn
target reported max download size of 2147483648 bytes
sending 'sbl1' (280 KB)...
OKAY [ 0.000s]
writing 'sbl1'...
OKAY [ 0.031s]
finished. total time: 0.031s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase aboot
erasing 'aboot'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash aboot firmware\emmc_appsboot.mbn
target reported max download size of 2147483648 bytes
sending 'aboot' (892 KB)...
OKAY [ 0.031s]
writing 'aboot'...
OKAY [ 0.031s]
finished. total time: 0.063s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase recovery
erasing 'recovery'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash recovery firmware\recovery.img
target reported max download size of 2147483648 bytes
sending 'recovery' (13308 KB)...
OKAY [ 0.484s]
writing 'recovery'...
OKAY [ 0.313s]
finished. total time: 0.797s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash boot firmware\boot.img
target reported max download size of 2147483648 bytes
sending 'boot' (12760 KB)...
OKAY [ 0.453s]
writing 'boot'...
OKAY [ 0.281s]
finished. total time: 0.734s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase system
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.281s]
finished. total time: 0.281s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash system firmware\system.img
target reported max download size of 2147483648 bytes
erasing 'system'...
OKAY [ 0.031s]
sending 'system' (846110 KB)...
OKAY [ 26.798s]
writing 'system'...
OKAY [ 25.611s]
finished. total time: 52.440s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 0.469s]
finished. total time: 0.469s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe flash userdata firmware\userdata.img
target reported max download size of 2147483648 bytes
erasing 'userdata'...
OKAY [ 0.188s]
sending 'userdata' (141162 KB)...
OKAY [ 4.453s]
writing 'userdata'...
OKAY [ 3.828s]
finished. total time: 8.469s
C:\Program Files (x86)\yotaphone_flasher>fastboot.exe erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.047s]
finished. total time: 0.062s
C:\Program Files (x86)\yotaphone_flasher>pause
Press any key to continue . . .
Click to expand...
Click to collapse
Well I think the only option is to try another one.
Here is one link with all roms: https://forum.xda-developers.com/yotaphone-one/general/firrmware-files-one-files-onedrive-t3633138
unfortunately you have to download them all together :/.
Here I uploaded the chinese firmware files that are working for me(, i just tested):
https://drive.google.com/open?id=0B_Z57M1pKWRubG1ycDk1aVJuWXM
One more important thing. Try doing:
Code:
fastboot.exe oem unlock
It seems that the phone gets relocked when flashing probably the boot.img(not sure about that).
AND try running every flash command twice! For twrp recovery for example, it did not work until I ran it twice without restarting. Strange stuff.
Still no luck - I tried with tomgaga's firmware, erased the cache, replaced script for flashing tsg with a one that flashed rpm. The phone still goes into boot loop. I tried tomgaga's advice about pressing vol+ & pow and when 'Powered by Android' logo appears to let go pow - all that in order to enter recovery mode. It jsut keeps rebooting with 'Powered by Android' logo. Still with all CN firmwares I can load twrp recovery image.
I have to say how happy I am that you guys participate in that thread and keep it alive. I have no doubts that in the end we will succeed unbricking this wonderfull phone. Cheers
One more thing - when I try with command:
Code:
fastboot.exe oem unlock
phone just reboots in that well known 'Powered by Android' bootloop. I guess it have to do something - maybe show 'Your OEM is now unlocked' or something. Best regards guys!
angelll123 said:
Still no luck - I tried with tomgaga's firmware, erased the cache, replaced script for flashing tsg with a one that flashed rpm. The phone still goes into boot loop. I tried tomgaga's advice about pressing vol+ & pow and when 'Powered by Android' logo appears to let go pow - all that in order to enter recovery mode. It jsut keeps rebooting with 'Powered by Android' logo. Still with all CN firmwares I can load twrp recovery image.
I have to say how happy I am that you guys participate in that thread and keep it alive. I have no doubts that in the end we will succeed unbricking this wonderfull phone. Cheers
Click to expand...
Click to collapse
Ok this might sound stupid, but could you for certainty check that your buttons are functioning correctly by booting some normal recovery using fastboot and then see if vol up, down, and power work consistently as expected.
And when you say it goes into bootloop, do you mean that it shows the yotaphone animation for a while first?
Hi guys,
same behaviour here for:
Code:
fastboot.exe oem unlock
It reboots and nothing happens after 'Powered by Android" logo.
Ok this might sound stupid, but could you for certainty check that your buttons are functioning correctly by booting some normal recovery using fastboot and then see if vol up, down, and power work consistently as expected.
Click to expand...
Click to collapse
Booting into recovery via fastboot also not possible. I don't think that the buttons are defect. At least booting into "Downloading mode" is possible.
And when you say it goes into bootloop, do you mean that it shows the yotaphone animation for a while first?
Click to expand...
Click to collapse
For my device, it means that it shows the very first "powered by android" logo, no Yotaphone animation. After 5-10 minutes it reboots and this happens continuously, till battery runs out.
veeblefetzer said:
Hi guys,
same behaviour here for:
Code:
fastboot.exe oem unlock
It reboots and nothing happens after 'Powered by Android" logo.
Booting into recovery via fastboot also not possible. I don't think that the buttons are defect. At least booting into "Downloading mode" is possible.
For my device, it means that it shows the very first "powered by android" logo, no Yotaphone animation. After 5-10 minutes it reboots and this happens continuously, till battery runs out.
Click to expand...
Click to collapse
How to you try to get into recovery using fastboot? And what happens then?
And you can also try flashing the russian lollipop firmware:
I uploaded it here:
https://drive.google.com/open?id=0B_Z57M1pKWRuSm5LTXhBYzJfS00
it includes the hybrid modem by default, but the russian and chines radio files are included too.
And one more thing, it seems I did not include a line to flash the persist partition, for me it worked without, but you could to try that too:
Code:
fastboot.exe flash persist firmware\persist.img
fastboot.exe flash persist firmware\persist.img
Hello,
did you solved this problem?
I have the same problem as you. Only "powered by android" and restart. Power and - button ->downloading, power and +button -> nothing
The EPD display is stuck on the same screen from the yota reader, bootloap every 10 seconds. Between every restart lcd display flash with blue color.
I didnt make any firmware upgrades or anything else with software, phone didnt fall down...
Thanks for help
Dalibor
Related
I have a razr m. It came with stock JB. I safestrapped it. I later had an issue so i tried to fastboot it using DROID_RAZR_M_Utility1.10. It worked but then i got an error in fastboot. I tried RSD. I get an error failed flashing process. 1/19 flash partition "gpt_main0.bin" -> PHONE returned FAIL. When using the razr m utility i get "writing 'system'... INFOProtocol error (multiflash unexpected).
mamismo said:
I have a razr m. It came with stock JB. I safestrapped it. I later had an issue so i tried to fastboot it using DROID_RAZR_M_Utility1.10. It worked but then i got an error in fastboot. I tried RSD. I get an error failed flashing process. 1/19 flash partition "gpt_main0.bin" -> PHONE returned FAIL. When using the razr m utility i get "writing 'system'... INFOProtocol error (multiflash unexpected).
Click to expand...
Click to collapse
Any help? stuck in the same situation
bootloader is unblocked?
U have to decompress first with rsd and then extract happened to me but u r gonna need the fast boot files
Sent from my XT907 using xda app-developers app
Yep, if you can't get the utility to work, do through RSD itself. I've used the Utility three times in the last week, and have had no problems. Not sure why you're having issues.
i found a solution - my fastboot was outdated. This created a requirement for the windows version of the Razr M utility. RSD never worked for me
mamismo said:
i found a solution - my fastboot was outdated. This created a requirement for the windows version of the Razr M utility. RSD never worked for me
Click to expand...
Click to collapse
hi, can you tell me how you fixed this problem, im getting the error in rsd and when i use matt's razr m utility.
i cd'ed into the utility folder and ran the utility. If that doesn't work you can try opening the fastboot update file and manually sending the commands through fastboot.
mamismo said:
i cd'ed into the utility folder and ran the utility. If that doesn't work you can try opening the fastboot update file and manually sending the commands through fastboot.
Click to expand...
Click to collapse
I'm when you say cd'ed, u mean open the windowsutility.bat using a cmd prompt? i did that and im still geting preflash verication failure at the end of the process and the same gpt_main0.bin error on the phone.
sirccchar said:
I'm when you say cd'ed, u mean open the windowsutility.bat using a cmd prompt? i did that and im still geting preflash verication failure at the end of the process and the same gpt_main0.bin error on the phone.
Click to expand...
Click to collapse
From what I understand, you can edit the XML file inside the zip file and remove the line with got_main0.bin. Save it and it should install. No guarantees, that's just what I read.
Sent from my XT907 using xda premium
netizenmt said:
From what I understand, you can edit the XML file inside the zip file and remove the line with got_main0.bin. Save it and it should install. No guarantees, that's just what I read.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
i did that and it still gets the failure and same result, it reboots and i see the red M and it just goes black. a lil bit more info, I was getting fail on the maintance update, so i tried rebloated my phone, and it was still failing, so i did a restore using twrp from a backup, but the camera was force closing, so i did a system wipe using twrp and now i think i'm bricked. safe strap shows up but is disabled and gets no input. anyone can help?
Try manually flashing everything based on the files in the XML file and see where you get an error. Use the fastboot flash and erase commands based on lines in the XML file
mamismo said:
Try manually flashing everything based on the files in the XML file and see where you get an error. Use the fastboot flash and erase commands based on lines in the XML file
Click to expand...
Click to collapse
so i did that using the following lines, phone reboots to the red M and blacks out, according to this site, i think im brick??? http://teamuscellular.com/Forum/topic/3916-electrify-m-cannot-downgrade-via-rsd-lite/ ((
fastboot flash partition gpt_main0.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl2 sbl2.mbn
fastboot flash sbl3 sbl3.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot reboot-bootloader
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot flash devtree device_tree.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cdrom cdrom
fastboot erase tombstones
fastboot erase cache
fastboot erase userdata
fastboot continue
from here
http://forum.xda-developers.com/showthread.php?t=2172537
and i get
E:\DROID_RAZR_M_Utility1.10>fastboot flash partition gpt_main0.bin
sending 'partition' (32 KB)...
OKAY [ 0.076s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 0.344s
E:\DROID_RAZR_M_Utility1.10>fastboot flash sbl1 sbl1.mbn
sending 'sbl1' (100 KB)...
OKAY [ 0.018s]
writing 'sbl1'...
OKAY [ 0.514s]
finished. total time: 0.534s
E:\DROID_RAZR_M_Utility1.10>fastboot flash sbl2 sbl2.mbn
sending 'sbl2' (126 KB)...
OKAY [ 0.020s]
writing 'sbl2'...
OKAY [ 1.079s]
finished. total time: 1.099s
E:\DROID_RAZR_M_Utility1.10>fastboot flash sbl3 sbl3.mbn
sending 'sbl3' (512 KB)...
OKAY [ 0.050s]
writing 'sbl3'...
OKAY [ 1.074s]
finished. total time: 1.125s
E:\DROID_RAZR_M_Utility1.10>fastboot flash rpm rpm.mbn
sending 'rpm' (140 KB)...
OKAY [ 0.021s]
writing 'rpm'...
OKAY [ 0.495s]
finished. total time: 0.516s
E:\DROID_RAZR_M_Utility1.10>fastboot flash tz tz.mbn
sending 'tz' (192 KB)...
OKAY [ 0.025s]
writing 'tz'...
OKAY [ 1.091s]
finished. total time: 1.125s
E:\DROID_RAZR_M_Utility1.10>fastboot flash aboot emmc_appsboot.mbn
sending 'aboot' (256 KB)...
OKAY [ 0.030s]
writing 'aboot'...
OKAY [ 1.612s]
finished. total time: 1.652s
E:\DROID_RAZR_M_Utility1.10>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.010s]
finished. total time: 0.014s
E:\DROID_RAZR_M_Utility1.10>
E:\DROID_RAZR_M_Utility1.10>fastboot flash modem NON-HLOS.bin
< waiting for device >
sending 'modem' (30720 KB)...
OKAY [ 2.374s]
writing 'modem'...
OKAY [ 1.426s]
sending 'modem' (17576 KB)...
OKAY [ 5.200s]
writing 'modem'...
OKAY [ 2.447s]
finished. total time: 11.468s
E:\DROID_RAZR_M_Utility1.10>fastboot flash fsg fsg.mbn
sending 'fsg' (2794 KB)...
OKAY [ 0.226s]
writing 'fsg'...
OKAY [ 2.066s]
finished. total time: 2.302s
E:\DROID_RAZR_M_Utility1.10>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.838s]
finished. total time: 0.843s
E:\DROID_RAZR_M_Utility1.10>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 1.248s]
finished. total time: 1.254s
E:\DROID_RAZR_M_Utility1.10>fastboot flash logo logo.bin
error: cannot load 'logo.bin'
E:\DROID_RAZR_M_Utility1.10>fastboot flash devtree device_tree.bin
sending 'devtree' (512 KB)...
OKAY [ 0.050s]
writing 'devtree'...
OKAY [ 0.553s]
finished. total time: 0.613s
E:\DROID_RAZR_M_Utility1.10>fastboot flash boot boot.img
sending 'boot' (10240 KB)...
OKAY [ 0.799s]
writing 'boot'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 1.084s
E:\DROID_RAZR_M_Utility1.10>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 0.799s]
writing 'recovery'...
OKAY [ 5.358s]
finished. total time: 6.167s
E:\DROID_RAZR_M_Utility1.10>fastboot flash system system.img
sending 'system' (30720 KB)...
OKAY [ 2.444s]
writing 'system'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 2.761s
E:\DROID_RAZR_M_Utility1.10>fastboot flash cdrom cdrom
error: cannot load 'cdrom'
E:\DROID_RAZR_M_Utility1.10>fastboot erase tombstones
erasing 'tombstones'...
OKAY [ 1.371s]
finished. total time: 1.377s
E:\DROID_RAZR_M_Utility1.10>fastboot erase cache
erasing 'cache'...
OKAY [ 1.655s]
finished. total time: 1.661s
E:\DROID_RAZR_M_Utility1.10>fastboot erase userdata
erasing 'userdata'...
OKAY [ 3.102s]
finished. total time: 3.102s
E:\DROID_RAZR_M_Utility1.10> fastboot continue
resuming boot...
OKAY [ 0.010s]
finished. total time: 0.015s
sirccchar said:
so i did that using the following lines, phone reboots to the red M and blacks out, according to this site, i think im brick??? http://teamuscellular.com/Forum/topic/3916-electrify-m-cannot-downgrade-via-rsd-lite/ ((
fastboot flash partition gpt_main0.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl2 sbl2.mbn
fastboot flash sbl3 sbl3.mbn
fastboot flash rpm rpm.mbn
fastboot flash tz tz.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot reboot-bootloader
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot flash devtree device_tree.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cdrom cdrom
fastboot erase tombstones
fastboot erase cache
fastboot erase userdata
fastboot continue
from here
http://forum.xda-developers.com/showthread.php?t=2172537
and i get
E:\DROID_RAZR_M_Utility1.10>fastboot flash partition gpt_main0.bin
sending 'partition' (32 KB)...
OKAY [ 0.076s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 0.344s
E:\DROID_RAZR_M_Utility1.10>fastboot flash sbl1 sbl1.mbn
sending 'sbl1' (100 KB)...
OKAY [ 0.018s]
writing 'sbl1'...
OKAY [ 0.514s]
finished. total time: 0.534s
E:\DROID_RAZR_M_Utility1.10>fastboot flash sbl2 sbl2.mbn
sending 'sbl2' (126 KB)...
OKAY [ 0.020s]
writing 'sbl2'...
OKAY [ 1.079s]
finished. total time: 1.099s
E:\DROID_RAZR_M_Utility1.10>fastboot flash sbl3 sbl3.mbn
sending 'sbl3' (512 KB)...
OKAY [ 0.050s]
writing 'sbl3'...
OKAY [ 1.074s]
finished. total time: 1.125s
E:\DROID_RAZR_M_Utility1.10>fastboot flash rpm rpm.mbn
sending 'rpm' (140 KB)...
OKAY [ 0.021s]
writing 'rpm'...
OKAY [ 0.495s]
finished. total time: 0.516s
E:\DROID_RAZR_M_Utility1.10>fastboot flash tz tz.mbn
sending 'tz' (192 KB)...
OKAY [ 0.025s]
writing 'tz'...
OKAY [ 1.091s]
finished. total time: 1.125s
E:\DROID_RAZR_M_Utility1.10>fastboot flash aboot emmc_appsboot.mbn
sending 'aboot' (256 KB)...
OKAY [ 0.030s]
writing 'aboot'...
OKAY [ 1.612s]
finished. total time: 1.652s
E:\DROID_RAZR_M_Utility1.10>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.010s]
finished. total time: 0.014s
E:\DROID_RAZR_M_Utility1.10>
E:\DROID_RAZR_M_Utility1.10>fastboot flash modem NON-HLOS.bin
< waiting for device >
sending 'modem' (30720 KB)...
OKAY [ 2.374s]
writing 'modem'...
OKAY [ 1.426s]
sending 'modem' (17576 KB)...
OKAY [ 5.200s]
writing 'modem'...
OKAY [ 2.447s]
finished. total time: 11.468s
E:\DROID_RAZR_M_Utility1.10>fastboot flash fsg fsg.mbn
sending 'fsg' (2794 KB)...
OKAY [ 0.226s]
writing 'fsg'...
OKAY [ 2.066s]
finished. total time: 2.302s
E:\DROID_RAZR_M_Utility1.10>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.838s]
finished. total time: 0.843s
E:\DROID_RAZR_M_Utility1.10>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 1.248s]
finished. total time: 1.254s
E:\DROID_RAZR_M_Utility1.10>fastboot flash logo logo.bin
error: cannot load 'logo.bin'
E:\DROID_RAZR_M_Utility1.10>fastboot flash devtree device_tree.bin
sending 'devtree' (512 KB)...
OKAY [ 0.050s]
writing 'devtree'...
OKAY [ 0.553s]
finished. total time: 0.613s
E:\DROID_RAZR_M_Utility1.10>fastboot flash boot boot.img
sending 'boot' (10240 KB)...
OKAY [ 0.799s]
writing 'boot'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 1.084s
E:\DROID_RAZR_M_Utility1.10>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 0.799s]
writing 'recovery'...
OKAY [ 5.358s]
finished. total time: 6.167s
E:\DROID_RAZR_M_Utility1.10>fastboot flash system system.img
sending 'system' (30720 KB)...
OKAY [ 2.444s]
writing 'system'...
Preflash validation failed
FAILED (remote failure)
finished. total time: 2.761s
E:\DROID_RAZR_M_Utility1.10>fastboot flash cdrom cdrom
error: cannot load 'cdrom'
E:\DROID_RAZR_M_Utility1.10>fastboot erase tombstones
erasing 'tombstones'...
OKAY [ 1.371s]
finished. total time: 1.377s
E:\DROID_RAZR_M_Utility1.10>fastboot erase cache
erasing 'cache'...
OKAY [ 1.655s]
finished. total time: 1.661s
E:\DROID_RAZR_M_Utility1.10>fastboot erase userdata
erasing 'userdata'...
OKAY [ 3.102s]
finished. total time: 3.102s
E:\DROID_RAZR_M_Utility1.10> fastboot continue
resuming boot...
OKAY [ 0.010s]
finished. total time: 0.015s
Click to expand...
Click to collapse
im having the same issue bricked and cannot boot and bootloader is locked:crying:
What OS are you using on your computer to run the utility? Are you using the Motorola charging/usb cable? Have you tried a different USB port on your computer? Is your battery charged.
RikRong said:
What OS are you using on your computer to run the utility? Are you using the Motorola charging/usb cable? Have you tried a different USB port on your computer? Is your battery charged.
Click to expand...
Click to collapse
i tried on 2 different computers and battery was fully charged
one comp running windows 7 one running windows vista
bigrob1015 said:
i tried on 2 different computers and battery was fully charged
one comp running windows 7 one running windows vista
Click to expand...
Click to collapse
I also tried it on a couple of PCs, with different cables, changing the xml, everything i could find to do. are we dead in the water? does this phone have a year warranty? the safe strap screen is still coming out, will that make the phone out of warranty?
sirccchar said:
I also tried it on a couple of PCs, with different cables, changing the xml, everything i could find to do. are we dead in the water? does this phone have a year warranty? the safe strap screen is still coming out, will that make the phone out of warranty?
Click to expand...
Click to collapse
matt has a new utility out for 4.1.2 and a new set of tools I just used it and it works flawlessly!!!!! no longer bricked
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
look for his post with the new utility
sirccchar said:
I'm when you say cd'ed, u mean open the windowsutility.bat using a cmd prompt? i did that and im still geting preflash verication failure at the end of the process and the same gpt_main0.bin error on the phone.
Click to expand...
Click to collapse
maybe your download file is corrupted ，try download it again , the toolbox should work under cmd mode, it's better than RSD
way.
hey guys. just wanted to come here to say that i had previously soft-bricked my 907, and using RSDlite in conjunction with the pertinent files from matt's utility (seems to need to be 1.20 ; 1.10 absolutely did not work) got my handset working again in like 10 minutes. additional details available on request, but essentially it was a matter of having the phone turned on in AP fastboot mode, plugged into a USB port, at roughly 90% power, and clicking "start" in RSD lite 6.14. JB 4.1.2 stock (i used the fb files from matt's 1.20 file, haven't really investigated whether or not this is a crucial detail). i was dealing with a totally useless phone during the moments leading up to this process having worked.
Stock ZIP Firmware for XT1069
File: RETBR_XT1069_5.0.2_LXB22.46-28.zip
Tested and working 100%!
Stock, retail firmware for XT1069. Android Lollipop 5.0.2.
DOWNLOAD LINK: Mega
PLEASE NOTE: Your device will be fully wiped!
Be warned and backup your data.
Proceed at your own risk! Do not blame me for bricked devices.
Instructions:
1. Download and unzip firmware file from above.
2. Download mfastboot from here and unzip in the same folder as firmware files.
3. Boot your device into bootloader and connect to computer via USB.
2. Flash firmware with fastboot. Flashing commands provided below.
ATTENTION! For Lollipop firmware, there's a 4th system.img_sparsechunk. (KitKat FW had only 3 files.)
Please see changes in flashing commands below.
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
After reboot, enjoy your fresh Lollipop.
Notes: This is the stock Motorola firmware file, for XT1069 device (only!), Android version 5.0.2 (Lollipop).
This firmware is NOT rooted.
To remove the "Unlocked Bootloader Warning", please refer to my other topic, here.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any comments, please write below.
If you like, hit THANKS button. :good:
rafaelbrunner said:
Stock ZIP Firmware for XT1069
File: RETBR_XT1069_5.0.2_LXB22.46-28.zip
Tested and working 100%!
Stock, retail firmware for XT1069. Android Lollipop 5.0.2.
DOWNLOAD LINK: Mega
PLEASE NOTE: Your device will be fully wiped!
Be warned and backup your data.
Proceed at your own risk! Do not blame me for bricked devices.
Instructions:
1. Download and unzip firmware file from above.
2. Download mfastboot from here and unzip in the same folder as firmware files.
3. Boot your device into bootloader and connect to computer via USB.
2. Flash firmware with fastboot. Flashing commands provided below.
ATTENTION! For Lollipop firmware, there's a 4th system.img_sparsechunk. (KitKat FW had only 3 files.)
Please see changes in flashing commands below.
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
After reboot, enjoy your fresh Lollipop.
Notes: This is the stock Motorola firmware file, for XT1069 device (only!), Android version 5.0.2 (Lollipop).
This firmware is NOT rooted.
To remove the "Unlocked Bootloader Warning", please refer to my other topic, here.
Screenshot:
Any comments, please write below.
If you like, hit THANKS button. :good:
Click to expand...
Click to collapse
Friend would offer me only the file MOTOBOOT.img ???
iamDeeh said:
Friend would offer me only the file MOTOBOOT.img ???
Click to expand...
Click to collapse
If you want to update your bootlaoder .. There's a thread for that ! With all necessary links ! Refer that please
Unable to flash my xt1069
Hello , my xt1069 is stock in initial logo becouse that i follow all steps in this tutorial but when reboot nothing happens is still stock in initial logo. I hope that you help me. Sorry for my bad english
reisyreinier said:
Hello , my xt1069 is stock in initial logo becouse that i follow all steps in this tutorial but when reboot nothing happens is still stock in initial logo. I hope that you help me. Sorry for my bad english
Click to expand...
Click to collapse
This is a stock firmware so your phone should be stock after flashing.
What do you mean with "initial logo"?
reisyreinier said:
Hello , my xt1069 is stock in initial logo becouse that i follow all steps in this tutorial but when reboot nothing happens is still stock in initial logo. I hope that you help me. Sorry for my bad english
Click to expand...
Click to collapse
Do you mean Stuck at boot logo?
reefuge said:
Do you mean Stuck at boot logo?
Click to expand...
Click to collapse
Yes, that's what I meant is stuck at boot logo. I unlock the bootloader and do the process again but the result is the same. When i execute comands the phone show yellows letters, in other post i read that this is a good signal and all commands return OK but when restart still stuck at boot logo. The phone is Motorola XT1069 dual sim
Is it worth to update it from Kitkat to Lollipop? Why?
reisyreinier said:
Yes, that's what I meant is stuck at boot logo. I unlock the bootloader and do the process again but the result is the same. When i execute comands the phone show yellows letters, in other post i read that this is a good signal and all commands return OK but when restart still stuck at boot logo. The phone is Motorola XT1069 dual sim
Click to expand...
Click to collapse
have you deleted usercache and datacache once you have flashed all files BEFORE you reboot ?
put phone into ap fastboot mode and run my test -reset .bat file from the attached zip file (please unzip to pc )
choose option 5 - reset
choose option 4 - reboot
choose option 6 - exit
reefuge said:
have you deleted usercache and datacache once you have flashed all files BEFORE you reboot ?
put phone into ap fastboot mode and run my test -reset .bat file from the attached zip file (please unzip to pc )
choose option 5 - reset
choose option 4 - reboot
choose option 6 - exit
Click to expand...
Click to collapse
Yes, i delete usercache and datacache before reboot but anyway i run your script and this is the result for option 5
FACTORY RESET
ECHO is off.
erasing 'userdata'...
OKAY [ 0.031s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.016s]
erasing 'cache'...
OKAY [ 0.016s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.031s]
finished. total time: 0.094s
Done!.........
Then reboot and nothing happens the phone is still stuck in boot logo.
Is there any pre-condition to run the process(i mean battery fully charged, etc)?
I ask you that becouse all commands return ok but dont do anything.
This is the log for complete process
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.019s]
writing 'partition'...
OKAY [ 0.309s]
finished. total time: 0.328s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash motoboot motoboot.img
target reported max download size of 536870912 bytes
sending 'motoboot' (2184 KB)...
OKAY [ 0.096s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.991s]
finished. total time: 1.087s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash logo logo.bin
target reported max download size of 536870912 bytes
sending 'logo' (697 KB)...
OKAY [ 0.073s]
writing 'logo'...
OKAY [ 0.059s]
finished. total time: 0.131s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (10200 KB)...
OKAY [ 0.362s]
writing 'boot'...
OKAY [ 0.192s]
finished. total time: 0.554s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10280 KB)...
OKAY [ 0.373s]
writing 'recovery'...
OKAY [ 0.193s]
finished. total time: 0.566s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.0
target reported max download size of 536870912 bytes
sending 'system' (257607 KB)...
OKAY [ 8.103s]
writing 'system'...
OKAY [ 4.578s]
finished. total time: 12.681s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.1
target reported max download size of 536870912 bytes
sending 'system' (256614 KB)...
OKAY [ 8.071s]
writing 'system'...
OKAY [ 4.911s]
finished. total time: 12.982s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.2
target reported max download size of 536870912 bytes
sending 'system' (259672 KB)...
OKAY [ 8.166s]
writing 'system'...
OKAY [ 4.764s]
finished. total time: 12.930s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.3
target reported max download size of 536870912 bytes
sending 'system' (240897 KB)...
OKAY [ 7.581s]
writing 'system'...
OKAY [ 3.939s]
finished. total time: 11.520s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.4
target reported max download size of 536870912 bytes
sending 'system' (38920 KB)...
OKAY [ 1.269s]
writing 'system'...
OKAY [ 0.658s]
finished. total time: 1.927s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (49356 KB)...
OKAY [ 1.595s]
writing 'modem'...
OKAY [ 0.812s]
finished. total time: 2.406s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.059s]
finished. total time: 0.059s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.060s]
finished. total time: 0.060s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash fsg fsg.mbn
target reported max download size of 536870912 bytes
sending 'fsg' (1013 KB)...
OKAY [ 0.117s]
writing 'fsg'...
OKAY [ 0.046s]
finished. total time: 0.163s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase cache
erasing 'cache'...
OKAY [ 0.063s]
finished. total time: 0.063s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.067s]
finished. total time: 0.067s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot -w
erasing 'userdata'...
OKAY [ 0.018s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.068s]
erasing 'cache'...
OKAY [ 0.043s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.048s]
finished. total time: 0.178s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot reboot
rebooting...
finished. total time: 0.001s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$
thanks in advance for your time
reisyreinier said:
Yes, i delete usercache and datacache before reboot but anyway i run your script and this is the result for option 5
FACTORY RESET
ECHO is off.
erasing 'userdata'...
OKAY [ 0.031s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.016s]
erasing 'cache'...
OKAY [ 0.016s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.031s]
finished. total time: 0.094s
Done!.........
Then reboot and nothing happens the phone is still stuck in boot logo.
Is there any pre-condition to run the process(i mean battery fully charged, etc)?
I ask you that becouse all commands return ok but dont do anything.
This is the log for complete process
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.019s]
writing 'partition'...
OKAY [ 0.309s]
finished. total time: 0.328s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash motoboot motoboot.img
target reported max download size of 536870912 bytes
sending 'motoboot' (2184 KB)...
OKAY [ 0.096s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.991s]
finished. total time: 1.087s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash logo logo.bin
target reported max download size of 536870912 bytes
sending 'logo' (697 KB)...
OKAY [ 0.073s]
writing 'logo'...
OKAY [ 0.059s]
finished. total time: 0.131s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (10200 KB)...
OKAY [ 0.362s]
writing 'boot'...
OKAY [ 0.192s]
finished. total time: 0.554s
[email protected]sarrollo22:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10280 KB)...
OKAY [ 0.373s]
writing 'recovery'...
OKAY [ 0.193s]
finished. total time: 0.566s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.0
target reported max download size of 536870912 bytes
sending 'system' (257607 KB)...
OKAY [ 8.103s]
writing 'system'...
OKAY [ 4.578s]
finished. total time: 12.681s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.1
target reported max download size of 536870912 bytes
sending 'system' (256614 KB)...
OKAY [ 8.071s]
writing 'system'...
OKAY [ 4.911s]
finished. total time: 12.982s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.2
target reported max download size of 536870912 bytes
sending 'system' (259672 KB)...
OKAY [ 8.166s]
writing 'system'...
OKAY [ 4.764s]
finished. total time: 12.930s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.3
target reported max download size of 536870912 bytes
sending 'system' (240897 KB)...
OKAY [ 7.581s]
writing 'system'...
OKAY [ 3.939s]
finished. total time: 11.520s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash system system.img_sparsechunk.4
target reported max download size of 536870912 bytes
sending 'system' (38920 KB)...
OKAY [ 1.269s]
writing 'system'...
OKAY [ 0.658s]
finished. total time: 1.927s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (49356 KB)...
OKAY [ 1.595s]
writing 'modem'...
OKAY [ 0.812s]
finished. total time: 2.406s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.059s]
finished. total time: 0.059s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.060s]
finished. total time: 0.060s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot flash fsg fsg.mbn
target reported max download size of 536870912 bytes
sending 'fsg' (1013 KB)...
OKAY [ 0.117s]
writing 'fsg'...
OKAY [ 0.046s]
finished. total time: 0.163s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase cache
erasing 'cache'...
OKAY [ 0.063s]
finished. total time: 0.063s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.067s]
finished. total time: 0.067s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot -w
erasing 'userdata'...
OKAY [ 0.018s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.068s]
erasing 'cache'...
OKAY [ 0.043s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.048s]
finished. total time: 0.178s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$ fastboot reboot
rebooting...
finished. total time: 0.001s
[email protected]:~/Documents/desarrollo_propio/Moviles/Motorola XT 1069/RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml$
thanks in advance for your time
Click to expand...
Click to collapse
I will say the 1st boot after flashing can take 10 minutes + so it may seem stuck but isn't... have you left a good 15 to 20 minutes to pass before confirming its stuck // also you do have a xt1069 for certain?
battery must be over about 25% if I remember correctly -- think it refuses and says about battery too low in >10% in red -
I know with my xt1068 not only is there 8gb and 16gb but also early and late version (the late having a toshiba front cam) and uses LXB22-99-16 (feb 25th build) as opposed to (6th jan build) -my xt1068 can run either build as the early model
are xt1069 dual sim like xt1068 with added dtv ?
reefuge said:
I will say the 1st boot after flashing can take 10 minutes + so it may seem stuck but isn't... have you left a good 15 to 20 minutes to pass before confirming its stuck // also you do have a xt1069 for certain?
battery must be over about 25% if I remember correctly -- think it refuses and says about battery too low in >10% in red -
I know with my xt1068 not only is there 8gb and 16gb but also early and late version (the late having a toshiba front cam) and uses LXB22-99-16 (feb 25th build) as opposed to (6th jan build) -my xt1068 can run either build as the early model
are xt1069 dual sim like xt1068 with added dtv ?
Click to expand...
Click to collapse
Sorry for the delay, but I had connectivity issues
I had never waited the 10 min, so I followed your advice, but after 30 min the outcome was the same, the phone was stuck at the boot logo. Yes my phone is dual sim and supports dtv. Im very shure that i have an xt1069, my intention is upload a picture from back side of my phone(label) but i dont know how to upload a picture to here.
thanks in advance
Hey, my frontal camera dont work after installing this rom, Im sure that is the correct rom (motorola moto g DTV ), and the camera was working before.
what should i do? factory reset again??
----
edit:
i think i found the solution, so i'm just trying to use another rom instead
thalesw said:
Hey, my frontal camera dont work after installing this rom, Im sure that is the correct rom (motorola moto g DTV ), and the camera was working before.
what should i do? factory reset again??
----
edit:
i think i found the solution, so i'm just trying to use another rom instead
Click to expand...
Click to collapse
Use this later version for toshiba front cam you need this LXB22.91-16 version for xt1069 BR stock rom
Hi all.
Had a moto g for a while and had no problems at all, until yesterday: WhatsApp crashed and said do I want to restore the history - I chose yes, and then it looked as if the app crashed, a black screen appeared
Turn the phone on/off and after the boot process has finished (android/motorola logo) the phone is once again stuck on the black screen -
Tried clearing the cache from the recovery mode , I've tried using fastboot and flashing the ROM back to 4.4.4 - but had absolutely no success
It was suggested to install ClockWordMod recovery or TWM, and I did this using fastboot, fastboot says it's complete and ok, but then everytime I go to recovery mode I have the lying down android saying no command, and the only place I can get too from there is the normal android recovery screen , I've tried reseting the factory defaults, clearing cache , but I can'#t get anything to work
Any help/advice is really appreciated - does anyone know why I cant boot into clockwork recovery after having flashed it successfully according to fastboot?
Thanks
Mark
You just can flash the factory firmware (stock) and relock the bootloader using mfastboot v2. It will fix this, I had this problem two times and the process above got me out of it. Also if first flash gives errors like partition and fallthrough, you will have to flash the commands once again. It will completely restore your device to normal.
Press thanks if this helps.
ArtRahul said:
You just can flash the factory firmware (stock) and relock the bootloader using mfastboot v2. It will fix this, I had this problem two times and the process above got me out of it. Also if first flash gives errors like partition and fallthrough, you will have to flash the commands once again. It will completely restore your device to normal.
Press thanks if this helps.
Click to expand...
Click to collapse
Thanks for the reply
Ive been looking at fastboot/adb -I had tried flshing back to 4.4.4 using fastboot also tried recovery roms like twrm
I'm not really sure how to do what you describe above , I cant find the stock firmware....I need UK 4.4.4 -- the links i come across are always dead
iyou got a link?
thanks!
You don't need the files for UK. Files for any other country will also work. Here's a tool how to restore to 4.4.4, and there are the images for UK too, I just checked, the link is working. http://forum.xda-developers.com/showthread.php?t=2983295
mapito said:
Thanks for the reply
Ive been looking at fastboot/adb -I had tried flshing back to 4.4.4 using fastboot also tried recovery roms like twrm
I'm not really sure how to do what you describe above , I cant find the stock firmware....I need UK 4.4.4 -- the links i come across are always dead
iyou got a link?
thanks!
Click to expand...
Click to collapse
But why you want 4.4.4 firmware, haven't you yet updated it to 5.0.2??
And if you want the factory firmware image for stock 5.0.2, it's here -> https://drive.google.com/open?id=0Bzr0qvz6uRerOGRfOEptU2p0ZkU
and
also you'll first need to update your bootloader to lollipop then you're ready to go.
ArtRahul said:
But why you want 4.4.4 firmware, haven't you yet updated it to 5.0.2??
And if you want the factory firmware image for stock 5.0.2, it's here -> https://drive.google.com/open?id=0Bzr0qvz6uRerOGRfOEptU2p0ZkU
and
also you'll first need to update your bootloader to lollipop then you're ready to go.
Click to expand...
Click to collapse
I was on Lollipop yea, but I was havng issues as above so thought id downgrade
how do i update the bootloader?!
I'm a bit confused by what I'm reading everywhere
do I need to go back to 4,4,4 or stay on Lollipop?! and also why would i need to update the bootloader
mapito said:
I was on Lollipop yea, but I was havng issues as above so thought id downgrade
how do i update the bootloader?!
I'm a bit confused by what I'm reading everywhere
do I need to go back to 4,4,4 or stay on Lollipop?! and also why would i need to update the bootloader
Click to expand...
Click to collapse
any chance you could put that stock firmware somewhere else? EVERY time i try and dl off google drive it NEVER ever finishes gets near and then says download interrupted
I did try 4.4.4.
and i got the following;
MOTO G 2nd GEN Kitkat 4.4.4 FIRMWARE Flasher
Plug in USB CABLE and Put Phone in AP FASTBOOT Flash Mode
Press any key to continue . . .
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
To cancel Unplug and Close program
Press any key to continue
FLASHING PARTITIONS.
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.310s
FLASHING BOOT LOADER..
target max-sparse-size: 256MB
sending 'motoboot' (2184 KB)...
OKAY [ 0.100s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.360s
FLASHING LOGO...
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.045s]
writing 'logo'...
OKAY [ 0.078s]
finished. total time: 0.130s
FLASHING BOOT....
target max-sparse-size: 256MB
sending 'boot' (10200 KB)...
OKAY [ 0.370s]
writing 'boot'...
OKAY [ 0.235s]
finished. total time: 0.610s
FLASHING RECOVERY.....
target max-sparse-size: 256MB
sending 'recovery' (10280 KB)...
OKAY [ 0.380s]
writing 'recovery'...
OKAY [ 0.200s]
finished. total time: 0.585s
FLASHING SYSTEM IMAGE IN MULTIPLE SECTIONS......
target max-sparse-size: 256MB
sending 'system' (257527 KB)...
OKAY [ 8.376s]
writing 'system'...
OKAY [ 4.691s]
finished. total time: 13.072s
target max-sparse-size: 256MB
sending 'system' (260629 KB)...
OKAY [ 8.502s]
writing 'system'...
OKAY [ 4.423s]
finished. total time: 12.931s
target max-sparse-size: 256MB
sending 'system' (255304 KB)...
OKAY [ 8.312s]
writing 'system'...
OKAY [ 4.786s]
finished. total time: 13.109s
target max-sparse-size: 256MB
sending 'system' (76792 KB)...
OKAY [ 2.531s]
writing 'system'...
OKAY [ 1.273s]
finished. total time: 3.804s
FLASHING MODEM.......
target max-sparse-size: 256MB
sending 'modem' (49252 KB)...
OKAY [ 1.641s]
writing 'modem'...
OKAY [ 0.827s]
finished. total time: 2.478s
erasing 'modemst1'...
OKAY [ 0.015s]
finished. total time: 0.015s
erasing 'modemst2'...
OKAY [ 0.010s]
finished. total time: 0.015s
target max-sparse-size: 256MB
sending 'fsg' (650 KB)...
OKAY [ 0.095s]
writing 'fsg'...
OKAY [ 0.075s]
finished. total time: 0.170s
ERASING CACHE ......
erasing 'cache'...
OKAY [ 0.020s]
finished. total time: 0.020s
ERASING USERDATA.......
erasing 'userdata'...
OKAY [ 0.025s]
finished. total time: 0.025s
DONE!.........PRESS ANY KEY TO REBOOT
which is because the firmware isnt suitable for the device?
also bootloader is 48.82 - thats ok? dont need to update it , right?
I just tried the easy installer for lollipop and while it looked like it had worked (see below)
it STILL stuck on the black creen after boot logos
Plug in USB CABLE and Put Phone in AP FASTBOOT Flash Mode
Press any key to continue . . .
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
To cancel Unplug and Close program
Press any key to continue
erasing 'userdata'...
OKAY [ 0.035s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.022s]
erasing 'cache'...
OKAY [ 0.018s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.028s]
finished. total time: 0.135s
FLASHING PARTITIONS.
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.036s]
writing 'partition'...
OKAY [ 0.310s]
finished. total time: 0.354s
FLASHING BOOT LOADER..
target max-sparse-size: 256MB
sending 'motoboot' (2184 KB)...
OKAY [ 0.112s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.969s]
finished. total time: 1.088s
FLASHING LOGO...
target max-sparse-size: 256MB
sending 'logo' (697 KB)...
OKAY [ 0.079s]
writing 'logo'...
OKAY [ 0.051s]
finished. total time: 0.136s
FLASHING BOOT....
target max-sparse-size: 256MB
sending 'boot' (10200 KB)...
OKAY [ 0.390s]
writing 'boot'...
OKAY [ 0.217s]
finished. total time: 0.615s
FLASHING RECOVERY.....
target max-sparse-size: 256MB
sending 'recovery' (10280 KB)...
OKAY [ 0.400s]
writing 'recovery'...
OKAY [ 0.211s]
finished. total time: 0.625s
FLASHING SYSTEM IMAGE IN MULTIPLE SECTIONS......
target max-sparse-size: 256MB
sending 'system' (258868 KB)...
OKAY [ 8.879s]
writing 'system'...
OKAY [ 4.770s]
finished. total time: 17.575s
target max-sparse-size: 256MB
sending 'system' (254994 KB)...
OKAY [ 8.729s]
writing 'system'...
OKAY [ 5.009s]
finished. total time: 13.750s
target max-sparse-size: 256MB
sending 'system' (260623 KB)...
OKAY [ 9.289s]
writing 'system'...
OKAY [ 4.744s]
finished. total time: 14.039s
target max-sparse-size: 256MB
sending 'system' (255649 KB)...
OKAY [ 8.650s]
writing 'system'...
OKAY [ 4.390s]
finished. total time: 13.044s
target max-sparse-size: 256MB
sending 'system' (32272 KB)...
OKAY [ 1.126s]
writing 'system'...
OKAY [ 0.553s]
finished. total time: 1.687s
FLASHING MODEM.......
target max-sparse-size: 256MB
sending 'modem' (49364 KB)...
OKAY [ 1.738s]
writing 'modem'...
OKAY [ 0.835s]
finished. total time: 2.578s
erasing 'modemst1'...
OKAY [ 0.015s]
finished. total time: 0.018s
erasing 'modemst2'...
OKAY [ 0.015s]
finished. total time: 0.019s
target max-sparse-size: 256MB
sending 'fsg' (651 KB)...
OKAY [ 0.096s]
writing 'fsg'...
OKAY [ 0.047s]
finished. total time: 0.150s
ERASING CACHE ......
erasing 'cache'...
OKAY [ 0.022s]
finished. total time: 0.031s
ERASING USERDATA.......
erasing 'userdata'...
OKAY [ 0.033s]
finished. total time: 0.043s
DONE!.........PRESS ANY KEY TO REBOOT
rebooting...
finished. total time: 0.005s
Press any key to exit
mapito said:
I just tried the easy installer for lollipop and while it looked like it had worked (see below)
it STILL stuck on the black creen after boot logos
Plug in USB CABLE and Put Phone in AP FASTBOOT Flash Mode
Press any key to continue . . .
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
To cancel Unplug and Close program
Press any key to continue
erasing 'userdata'...
OKAY [ 0.035s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.022s]
erasing 'cache'...
OKAY [ 0.018s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.028s]
finished. total time: 0.135s
FLASHING PARTITIONS.
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.036s]
writing 'partition'...
OKAY [ 0.310s]
finished. total time: 0.354s
FLASHING BOOT LOADER..
target max-sparse-size: 256MB
sending 'motoboot' (2184 KB)...
OKAY [ 0.112s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.969s]
finished. total time: 1.088s
FLASHING LOGO...
target max-sparse-size: 256MB
sending 'logo' (697 KB)...
OKAY [ 0.079s]
writing 'logo'...
OKAY [ 0.051s]
finished. total time: 0.136s
FLASHING BOOT....
target max-sparse-size: 256MB
sending 'boot' (10200 KB)...
OKAY [ 0.390s]
writing 'boot'...
OKAY [ 0.217s]
finished. total time: 0.615s
FLASHING RECOVERY.....
target max-sparse-size: 256MB
sending 'recovery' (10280 KB)...
OKAY [ 0.400s]
writing 'recovery'...
OKAY [ 0.211s]
finished. total time: 0.625s
FLASHING SYSTEM IMAGE IN MULTIPLE SECTIONS......
target max-sparse-size: 256MB
sending 'system' (258868 KB)...
OKAY [ 8.879s]
writing 'system'...
OKAY [ 4.770s]
finished. total time: 17.575s
target max-sparse-size: 256MB
sending 'system' (254994 KB)...
OKAY [ 8.729s]
writing 'system'...
OKAY [ 5.009s]
finished. total time: 13.750s
target max-sparse-size: 256MB
sending 'system' (260623 KB)...
OKAY [ 9.289s]
writing 'system'...
OKAY [ 4.744s]
finished. total time: 14.039s
target max-sparse-size: 256MB
sending 'system' (255649 KB)...
OKAY [ 8.650s]
writing 'system'...
OKAY [ 4.390s]
finished. total time: 13.044s
target max-sparse-size: 256MB
sending 'system' (32272 KB)...
OKAY [ 1.126s]
writing 'system'...
OKAY [ 0.553s]
finished. total time: 1.687s
FLASHING MODEM.......
target max-sparse-size: 256MB
sending 'modem' (49364 KB)...
OKAY [ 1.738s]
writing 'modem'...
OKAY [ 0.835s]
finished. total time: 2.578s
erasing 'modemst1'...
OKAY [ 0.015s]
finished. total time: 0.018s
erasing 'modemst2'...
OKAY [ 0.015s]
finished. total time: 0.019s
target max-sparse-size: 256MB
sending 'fsg' (651 KB)...
OKAY [ 0.096s]
writing 'fsg'...
OKAY [ 0.047s]
finished. total time: 0.150s
ERASING CACHE ......
erasing 'cache'...
OKAY [ 0.022s]
finished. total time: 0.031s
ERASING USERDATA.......
erasing 'userdata'...
OKAY [ 0.033s]
finished. total time: 0.043s
DONE!.........PRESS ANY KEY TO REBOOT
rebooting...
finished. total time: 0.005s
Press any key to exit
Click to expand...
Click to collapse
It's because your bootloader is updated and it cannot accept kitkat now and you will have to flash the 5.0.2 over this bootloader else you'll get these errors(black screen) again. Atlast what you need to do is to flash the stock 5.0.2 firmware via mfastboot v2 and you'll get back your device fully working.
These are the commands ->
Code:
------------------------------------------------------------------|
Moto G 2014 Stock 5.0.2 Restore Script
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
------------------------------------------------------------------|
And if the link I provided doesn't work then try searching for these two files
1. Motorola Moto G 2014 Stock 5.0.2 Factory Firmware
2. mfastboot v2
You can easily get that on XDA, after you download, just unzip the firmware file in the mfastboot's folder and then in cmd flash above commands.
ArtRahul said:
It's because your bootloader is updated and it cannot accept kitkat now and you will have to flash the 5.0.2 over this bootloader else you'll get these errors(black screen) again. Atlast what you need to do is to flash the stock 5.0.2 firmware via mfastboot v2 and you'll get back your device fully working.
These are the commands ->
Code:
------------------------------------------------------------------|
Moto G 2014 Stock 5.0.2 Restore Script
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
------------------------------------------------------------------|
And if the link I provided doesn't work then try searching for these two files
1. Motorola Moto G 2014 Stock 5.0.2 Factory Firmware
2. mfastboot v2
You can easily get that on XDA, after you download, just unzip the firmware file in the mfastboot's folder and then in cmd flash above commands.
Click to expand...
Click to collapse
hey thanks
so needs to be mfastboot2 not fastboot?
is there anyway to check exact version of android i had without being able to get in os..i ink it was 5.0.2
mapito said:
hey thanks
so needs to be mfastboot2 not fastboot?
is there anyway to check exact version of android i had without being able to get in os..i ink it was 5.0.2
Click to expand...
Click to collapse
If last time, on your phone, you used Lollipop, then it's 5.0.2 and if KitKat then it's 4.4.4, simple.
And you'll need mfastboot2
turns out the problem could be more than i thought..when i try to wipe user data/clear cache i get failed errors on the phone
..while it says the phone has been flashed successfully it never works
i guess this has something to do with the fact cant erase user data/clear cache
other people have had the same issues and no fix reported beyond getting a replacement
http://forum.xda-developers.com/moto-g-2014/help/factory-reset-t3075587/page4
mapito said:
turns out the problem could be more than i thought..when i try to wipe user data/clear cache i get failed errors on the phone
..while it says the phone has been flashed successfully it never works
i guess this has something to do with the fact cant erase user data/clear cache
other people have had the same issues and no fix reported beyond getting a replacement
Click to expand...
Click to collapse
what errors are you getting now...
are these (failed to validate system image/ fall-through from normal boot)??
If these are the errors you will have to re-flash the commands given above(as I told you in previous post).
I had same problem twice yet, and fixed by this process, so I can make you sure that you too should try again, and report the news here. I am here to help you.
Try using fastboot to boot philz cwm temporarily.
Fastboot boot Phil'srecovery.IMG
(or whatever its named)
Then use philz to format your partitions. Assuming twrp is installed already, Reboot to enter twrp. then use twrp to format partitions. Install ROM.
Sent from my Moto G 2014 using XDA Free mobile app
no TWR installed can i still use this recovery img or wont it work?
mapito said:
no TWR installed can i still use this recovery img or wont it work?
Click to expand...
Click to collapse
Install twrp recovery.
Sent from my Moto G 2014 using XDA Free mobile app
I cant mate, everytime I install it it says successfu;l but when i reboot its not there..I think there's a problem with the motherboard oe eeMC memory as when i try andwipe user data/cache it comes back saying failed
so I guess it cant write to the storage which is why i cant get TWRP to work
any ideas what to do here? fastboot says everythings worked..but clearly hasn't as cant get into TWRP or CWM even tried flashing stock sand nothing..but fastboot - w shows errors
reading on here people suggest its to do with the eeMC, itsa almost like the storage is set to read only
mapito said:
I cant mate, everytime I install it it says successfu;l but when i reboot its not there..I think there's a problem with the motherboard oe eeMC memory as when i try andwipe user data/cache it comes back saying failed
so I guess it cant write to the storage which is why i cant get TWRP to work
any ideas what to do here? fastboot says everythings worked..but clearly hasn't as cant get into TWRP or CWM even tried flashing stock sand nothing..but fastboot - w shows errors
reading on here people suggest its to do with the eeMC, itsa almost like the storage is set to read only
Click to expand...
Click to collapse
Did you try booting into philz with the command I gave you yet? Doesn't install, just boots the recovery image.
Sent from my Moto G 2014 using XDA Free mobile app
hey thanks for replyingI hadn't yet
I'll try that in a minute just grabbing the Philz recovery image
hope this works
thanks!
Please suggest me what i do ? i am not having network in my moto x play xt1562 from yesterday, i tried to turn off/on aeroplan mode and change SIM card but even then no signal, sim card working fine in other mobile.
i also tried to select network manually , and switch from 4g lte to 3g or 2g but not working.
Do you have IMEI?
Issued Solved
ziom5510 said:
Do you have IMEI?
Click to expand...
Click to collapse
I have solved the issue, not its 6.0, but got update of 7.1.1, NOW ITS Not comming
Hi. M having same problem in my x play what to do
Should I roll back to marshmallow
Plz provide twrp flasable room of lollipop or marshmallow
Vodafone slot2 - 358967063233173
Jio slot1 - 358967063233165
even i am having the same issue
Moto x play . No service status
Unable to register on network . Signal comes goes .
In low
Coverage area unable to register ..
Device is nougat version.
What to sumbody help me ..
techeligible3322 said:
Please suggest me what i do ? i am not having network in my moto x play xt1562 from yesterday, i tried to turn off/on aeroplan mode and change SIM card but even then no signal, sim card working fine in other mobile.
i also tried to select network manually , and switch from 4g lte to 3g or 2g but not working.
Click to expand...
Click to collapse
Facing same issue.. sim1jio4g.. and sim2airtel
Tried different sim. But problem persists.. moto xplay india android nougat
---------- Post added at 05:02 AM ---------- Previous post was at 04:58 AM ----------
Sim1jio sim2airtel.. tried sim change
Changed sim slot, tried netwrok reset, and factory reset too
Problem still persists
Moto xplay india
Nougat android ( ota ver.)
techeligible3322 said:
Hey i have foxed this issue, before i was having this issue, just go to google, and type there
" moto x play network issue techeligible ". Open that site and follow all steps from there
Click to expand...
Click to collapse
Thanks alot ,brother. Hope there will b a permanent solution for this problem
---------- Post added at 04:21 PM ---------- Previous post was at 04:01 PM ----------
Is there any permanent solution via root(i.e. on rooted moto xplay. Apps/mods o)
shivm500 said:
Thanks alot ,brother. Hope there will b a permanent solution for this problem
---------- Post added at 04:21 PM ---------- Previous post was at 04:01 PM ----------
Is there any permanent solution via root(i.e. on rooted moto xplay. Apps/mods o)
Click to expand...
Click to collapse
Try this one first then let me know
techeligible3322 said:
Try this one first then let me know
Click to expand...
Click to collapse
Thought it worked but itsnt . Both netwrks emergency calls only
shivm500 said:
Thought it worked but itsnt . Both netwrks emergency calls only
Click to expand...
Click to collapse
Did u reboot in fastboot ? And then download adb bypass tool in computer?
techeligible3322 said:
Did u reboot in fastboot ? And then download adb bypass tool in computer?
Click to expand...
Click to collapse
I followed the whole process via adb and the commands ..
Network just keep on droping and most of the time its emergency calls only..
shivm500 said:
I followed the whole process via adb and the commands ..
Network just keep on droping and most of the time its emergency calls only..[/QUOTE
Ah, that actually worked fine with me when i use commands okay, dis you also download firmware ??? I guess i downloaded 1gb file
Click to expand...
Click to collapse
techeligible3322 said:
shivm500 said:
I followed the whole process via adb and the commands ..
Network just keep on droping and most of the time its emergency calls only..[/QUOTE
Ah, that actually worked fine with me when i use commands okay, dis you also download firmware ??? I guess i downloaded 1gb file
Click to expand...
Click to collapse
I did adb fastboot
Nd thay commands
Dont know about firmware
Pls guide
(Iam on nougat)
Click to expand...
Click to collapse
Ok today i will search that firmware as well ok
Download Firmware
shivm500 said:
techeligible3322 said:
I did adb fastboot
Nd thay commands
Dont know about firmware
Pls guide
(Iam on nougat)
Click to expand...
Click to collapse
Go to Device Settings > About > check what's written with "BUILD NUMBER", mine is MPDS24-11..., this is to make sure you are downloading right firmware from below site. just match detail with build number firmware.
You can download your device Android 7.1 Firmware from below link
https://github.com/motoxplay/stock
-after downloading finish, just flash your device with this firmware.
Flash With Firmware:
-Extract the downloaded firmware to somewhere you can use adb.exe.
-Reboot device in "Bootloader Mode" by pressing "Volume Down + Power Key".
-Copy and past "ADB Commands Prompt" where you have "Downloaded extracted firmware".
-Press "Control + Shift + Mouse Right click", then open "Windows Command Prompt here".
-Connect device to computer.
Note: Make sure, "Moto X Play Firmare", and "ADB" both are in same folder.
Copy & Past below commands in to adb command prompt window, to flash with firmware:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Best of luck
Click to expand...
Click to collapse
After flash with firmware, soft reset your device and then I hope this would fix your network issue
thnx
shivm500 said:
techeligible3322 said:
Microsoft Windows [Version 10.0.15063]
(c) 2017 Microsoft Corporation. All rights reserved.
D:\New folder>adb reboot bootloader
D:\New folder>fastboot oem fb_mode_set
...
OKAY [ 0.009s]
finished. total time: 0.009s
D:\New folder>fastboot flash partition gpt.bin
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.007s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.803s]
finished. total time: 0.811s
D:\New folder>fastboot flash bootloader bootloader.img
target reported max download size of 268435456 bytes
sending 'bootloader' (2546 KB)...
OKAY [ 0.093s]
writing 'bootloader'...
(bootloader) flashing sbl1 ...
(bootloader) flashing aboot ...
(bootloader) flashing tz ...
(bootloader) flashing hyp ...
(bootloader) flashing rpm ...
OKAY [ 1.796s]
finished. total time: 1.891s
D:\New folder>fastboot flash logo logo.bin
target reported max download size of 268435456 bytes
sending 'logo' (3080 KB)...
OKAY [ 0.109s]
writing 'logo'...
OKAY [ 0.151s]
finished. total time: 0.261s
D:\New folder>fastboot flash boot boot.img
target reported max download size of 268435456 bytes
sending 'boot' (32768 KB)...
OKAY [ 1.188s]
writing 'boot'...
OKAY [ 1.388s]
finished. total time: 2.579s
D:\New folder>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (32752 KB)...
OKAY [ 1.174s]
writing 'recovery'...
OKAY [ 1.397s]
finished. total time: 2.572s
D:\New folder>fastboot flash system system.img_sparsechunk.0
target reported max download size of 268435456 bytes
sending 'system' (255439 KB)...
OKAY [ 8.619s]
writing 'system'...
OKAY [ 9.509s]
finished. total time: 18.129s
D:\New folder>fastboot flash system system.img_sparsechunk.1
target reported max download size of 268435456 bytes
sending 'system' (261106 KB)...
OKAY [ 8.810s]
writing 'system'...
OKAY [ 7.097s]
finished. total time: 15.908s
D:\New folder>fastboot flash system system.img_sparsechunk.2
target reported max download size of 268435456 bytes
sending 'system' (248342 KB)...
OKAY [ 8.364s]
writing 'system'...
OKAY [ 8.959s]
finished. total time: 17.323s
D:\New folder>fastboot flash system system.img_sparsechunk.3
target reported max download size of 268435456 bytes
sending 'system' (257578 KB)...
OKAY [ 8.682s]
writing 'system'...
OKAY [ 10.331s]
finished. total time: 19.012s
D:\New folder>fastboot flash system system.img_sparsechunk.4
target reported max download size of 268435456 bytes
sending 'system' (254106 KB)...
OKAY [ 8.567s]
writing 'system'...
OKAY [ 6.541s]
finished. total time: 15.107s
D:\New folder>fastboot flash system system.img_sparsechunk.5
target reported max download size of 268435456 bytes
sending 'system' (262050 KB)...
OKAY [ 8.822s]
writing 'system'...
OKAY [ 7.905s]
finished. total time: 16.727s
D:\New folder>fastboot flash system system.img_sparsechunk.6
target reported max download size of 268435456 bytes
sending 'system' (236003 KB)...
OKAY [ 7.942s]
writing 'system'...
OKAY [ 9.900s]
finished. total time: 17.842s
D:\New folder>fastboot flash system system.img_sparsechunk.7
target reported max download size of 268435456 bytes
error: cannot load 'system.img_sparsechunk.7': No error
D:\New folder>fastboot flash system system.img_sparsechunk.7
target reported max download size of 268435456 bytes
error: cannot load 'system.img_sparsechunk.7': No error
D:\New folder>fastboot flash system system.img_sparsechunk.7
target reported max download size of 268435456 bytes
error: cannot load 'system.img_sparsechunk.7': No error
D:\New folder>fastboot flash system system.img_sparsechunk.8
target reported max download size of 268435456 bytes
error: cannot load 'system.img_sparsechunk.8': No error
D:\New folder>fastboot flash system system.img_sparsechunk.9
target reported max download size of 268435456 bytes
error: cannot load 'system.img_sparsechunk.9': No error
D:\New folder>fastboot flash modem NON-HLOS.bin
target reported max download size of 268435456 bytes
sending 'modem' (37377 KB)...
OKAY [ 1.260s]
writing 'modem'...
OKAY [ 0.703s]
finished. total time: 1.963s
D:\New folder>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.031s]
finished. total time: 0.031s
D:\New folder>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.016s]
finished. total time: 0.016s
D:\New folder>fastboot flash fsg fsg.mbn
target reported max download size of 268435456 bytes
sending 'fsg' (1314 KB)...
OKAY [ 0.062s]
writing 'fsg'...
OKAY [ 0.047s]
finished. total time: 0.109s
D:\New folder>fastboot erase cache
erasing 'cache'...
OKAY [ 0.031s]
finished. total time: 0.031s
D:\New folder>fastboot erase customize
erasing 'customize'...
OKAY [ 0.016s]
finished. total time: 0.016s
D:\New folder>fastboot erase clogo
erasing 'clogo'...
OKAY [ 0.031s]
finished. total time: 0.031s
D:\New folder>fastboot oem fb_mode_clear
...
OKAY [ 0.016s]
finished. total time: 0.016s
D:\New folder>fastboot reboot
rebooting...
finished. total time: -0.000s
Click to expand...
Click to collapse
after 6 the 7th 8th and 9th sparse chunk
didnt happened
Click to expand...
Click to collapse
shivm500 said:
shivm500 said:
after 6 the 7th 8th and 9th sparse chunk
didnt happened
Click to expand...
Click to collapse
hey no problem, I also did same like this and got failed but even then after I reboot my device in bootloader, and then again restart my drive normal after I got my Singal issue solved
Click to expand...
Click to collapse
What about friends, it happens that I wanted to install TWRP to my OP6T, but it did not go well ... I followed the steps and when I gave "Reboot Recovery", I entered the fastboot mode, and it did not happen there, it did not allow me to flash the rom, the stock recovery, or the TWRP, tells me the following ...
This happens when wanting to boot the twrp.img:
PS C:\Users\vhr07\Desktop> fastboot devices
785694ef fastboot
PS C:\Users\vhr07\Desktop> fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.713s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.746s
PS C:\Users\vhr07\Desktop>
--------------------------------------------------------------------------------------------
This happens when you want to install the recovery stock:
PS C:\Users\vhr07\Desktop> fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.518s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 1.536s
PS C:\Users\vhr07\Desktop>
---------------------------------------------------------------------------------------------
I install the recovery by means of "boot" and it says OK, but when wanting to boot I get error:
PS C:\Users\vhr07\Desktop> fastboot flash boot recovery.img
target reported max download size of 536870912 bytes
sending 'boot' (65536 KB)...
OKAY [ 1.518s]
writing 'boot'...
OKAY [ 0.271s]
finished. total time: 1.794s
PS C:\Users\vhr07\Desktop> fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.506s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 1.547s
PS C:\Users\vhr07\Desktop>
---------------------------------------------------------------------------------------------
These were my last attempts ...:
PS C:\Users\vhr07\Desktop> fastboot flash recovery twrp.img
target reported max download size of 536870912 bytes
sending 'recovery' (30948 KB)...
OKAY [ 0.719s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.734s
PS C:\Users\vhr07\Desktop> fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.508s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 1.525s
PS C:\Users\vhr07\Desktop> fastboot flash recovery twrp.zip
target reported max download size of 536870912 bytes
sending 'recovery' (16849 KB)...
OKAY [ 0.391s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.406s
PS C:\Users\vhr07\Desktop> fastboot flash recovery_b recovery.img
target reported max download size of 536870912 bytes
sending 'recovery_b' (65536 KB)...
OKAY [ 1.523s]
writing 'recovery_b'...
FAILED (remote: (recovery_b_b) No such partition)
finished. total time: 1.538s
PS C:\Users\vhr07\Desktop> fastboot flash boot_b recovery.img
target reported max download size of 536870912 bytes
sending 'boot_b' (65536 KB)...
OKAY [ 1.517s]
writing 'boot_b'...
OKAY [ 0.301s]
finished. total time: 1.824s
PS C:\Users\vhr07\Desktop> fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.511s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 1.549s
PS C:\Users\vhr07\Desktop> fastboot flash boot twrp.img
target reported max download size of 536870912 bytes
sending 'boot' (30948 KB)...
OKAY [ 0.714s]
writing 'boot'...
OKAY [ 0.154s]
finished. total time: 0.874s
PS C:\Users\vhr07\Desktop> fastboot flash boot_b twrp.img
target reported max download size of 536870912 bytes
sending 'boot_b' (30948 KB)...
OKAY [ 0.717s]
writing 'boot_b'...
OKAY [ 0.181s]
finished. total time: 0.904s
PS C:\Users\vhr07\Desktop> fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.716s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.746s
----------------------------------------------------------------------------
Please, I need your help I promise not to ROOT again the hahaha team
I would pay if necessary
PD: already tried with bootloader unlocked and blocked
UPDATE: MSMTools, stuck on "PARAM PREPROCESSING"
https://imgur.com/qiaF8oh
First, flash the original boot.img again:
> fastboot flash boot_a boot.img
> fastboot flash boot_b boot.img
Then follow the instructions in https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482.
foobar66 said:
First, flash the original boot.img again:
> fastboot flash boot_a boot.img
> fastboot flash boot_b boot.img
Then follow the instructions in https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482.
Click to expand...
Click to collapse
Same situation
PS C:\Users\vhr07\Desktop> fastboot devices
785694ef fastboot
PS C:\Users\vhr07\Desktop> fastboot flash boot_a boot.img
target reported max download size of 536870912 bytes
sending 'boot_a' (65536 KB)...
OKAY [ 1.500s]
writing 'boot_a'...
OKAY [ 0.308s]
finished. total time: 1.814s
PS C:\Users\vhr07\Desktop> fastboot flash boot_b boot.img
target reported max download size of 536870912 bytes
sending 'boot_b' (65536 KB)...
OKAY [ 1.498s]
writing 'boot_b'...
OKAY [ 0.345s]
finished. total time: 1.849s
PS C:\Users\vhr07\Desktop> fastboot boot boot.img
downloading 'boot.img'...
OKAY [ 1.505s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 1.537s
PS C:\Users\vhr07\Desktop>
Seem look like usb debug not authorize pc
i had the same issue, and i was able to resurrect my phone, here's what i did:
Download both files from here
Once u are finished:
1.- Turn off ur phone
2.- Press volume up + volume down (at the same time, DONT PRESS POWER BUTTON) and plug ur phone into ur computer (the phone will go into QDL mode)
3.- Open msmdownloadtools mclaren
4.- Press START
5.- Wait for it to finish
You will have H2OS installed... now install OOS
This should work for you, since i was on the same boat as you. Good Luck!
efebe said:
i had the same issue, and i was able to resurrect my phone, here's what i did:
Download both files from here
Once u are finished:
1.- Turn off ur phone
2.- Press volume up + volume down (at the same time, DONT PRESS POWER BUTTON) and plug ur phone into ur computer (the phone will go into QDL mode)
3.- Open msmdownloadtools mclaren
4.- Press START
5.- Wait for it to finish
You will have H2OS installed... now install OOS
This should work for you, since i was on the same boat as you. Good Luck!
Click to expand...
Click to collapse
MSMTools stuck on this
https://imgur.com/qiaF8oh
Vlodayax said:
MSMTools stuck on this
https://imgur.com/qiaF8oh
Click to expand...
Click to collapse
Click "stop" then "exit" and kill the program and start over. Keep trying. I was down a whole day and a half after trying to flash a Rom. I made it worst after wiping the system and the MSM tool saved my a$$.
Sent from my OnePlus6T using XDA Labs