Related
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Rich7591110 said:
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Click to expand...
Click to collapse
The answer is NO you're asking firmware to replace/add hardware and that's not possible
I have a Verizon branded s7 edge and used Odin to load the 935U PI3 firmware. I am on T-Mo now and do have LTE band 12 working (validated with LTE Discovery). The research that I did found that the US variants have all the radios in them, but some carrier variants of firmware disable certain bands. By doing the 935U firmware, I also got rid of the notice on every reboot that I was using a non-Verizon SIM. So I now have all T-mo bands and no stupid SIM message.
Rich7591110 said:
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Click to expand...
Click to collapse
I can vouch for same experience as SF-IT guy. I bought a G935V and flashed with G935U firmware via odin. Works on T-mobile, even wifi calling works. Currently on the latest PI3 version of G935U firmware. I would that you search the forum to see if you can flash the G935T firmware directly. The only downside of using G935U firmware is that the FM radio chip is not enabled in the firmware. I read that the all the carrier versions (September security patch and newer) of the G935 firmware have the FM radio chip enabled. I prefer the 935U version because it there is not carrier bloatware. Samsung bloatware is still there.
davekung said:
I can vouch for same experience as SF-IT guy. I bought a G935V and flashed with G935U firmware via odin. Works on T-mobile, even wifi calling works. Currently on the latest PI3 version of G935U firmware. I would that you search the forum to see if you can flash the G935T firmware directly. The only downside of using G935U firmware is that the FM radio chip is not enabled in the firmware. I read that the all the carrier versions (September security patch and newer) of the G935 firmware have the FM radio chip enabled. I prefer the 935U version because it there is not carrier bloatware. Samsung bloatware is still there.
Click to expand...
Click to collapse
So what would the FM radio chip do? Just enable FM radios is all? Because if that's the downside then it's not a major setback as not too many people use the FM radio.
I don't think you can
cyoo97 said:
I don't think you can
Click to expand...
Click to collapse
You definitely can. All US versions of the S7 & S7 Edge are the same hardware and can be flashed to any other US firmware. (including the U firmware that automatically works on all 4 carriers)
andrewNY said:
You definitely can. All US versions of the S7 & S7 Edge are the same hardware and can be flashed to any other US firmware. (including the U firmware that automatically works on all 4 carriers)
Click to expand...
Click to collapse
So what you're saying is that flashing the U version firmware will unlock by default all 930"X" and 935"X" phones? As in it just unlocks the mofo and debloats some while you're at it?
What's the catch? It seems too easy
Tin_Man_0 said:
So what you're saying is that flashing the U version firmware will unlock by default all 930"X" and 935"X" phones? As in it just unlocks the mofo and debloats some while you're at it?
What's the catch?
Click to expand...
Click to collapse
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
andrewNY said:
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
Click to expand...
Click to collapse
What if I got a temporary unlock from t-mobile unlock app and then flashed this firmware? Would it make it permanent? Seems quite possible, but I don't know if the temporary unlock actually unlocks the phone or just inserts a bypass that would disappear if flashed.
andrewNY said:
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
Click to expand...
Click to collapse
I unlocked my US TMo phone when stock, rooted, and am running Echoe - which has a glitch where WiFi calling sort of works (can receive calls but not make them). In the TMo forum, there are threads on U - your comments here are more specific to what I am interested.
Which U firmware are you on and are you rooted (is is updated to latest v4 bootloader version), and did you have to ODIN and full wipe with CSC or did you get by with CSC Home to preserve data?
Also, are you on U CP or did you flash TMo CP to get all the bands?.
.
duplicate - XDA burped
Thanks everyone
I was wondering. I have the T-Mobile S7 Edge and when I get it unlocked could I flash almost any stock firmware that is based on the Qualcomm varent?
Like go from T-Mobile's Stock to AT&T's stock rom?
Correct.
After you flash your desired USA Qualcomm variant stock rom, be sure to flash your desired carrier's modem over the freshly flashed rom. This would ensure that all your LTE bands are not only firing correctly, but optimally because the incorrect modem parameters will cause battery drain.
ant0nius said:
Correct.
After you flash your desired USA Qualcomm variant stock rom, be sure to flash your desired carrier's modem over the freshly flashed rom. This would ensure that all your LTE bands are not only firing correctly, but optimally because the incorrect modem parameters will cause battery drain.
Click to expand...
Click to collapse
Now I did update to T-Mobile's Android 7 update, would that make it so I cant do this anymore?
Vicpdx18 said:
Now I did update to T-Mobile's Android 7 update, would that make it so I cant do this anymore?
Click to expand...
Click to collapse
You may flash unlimited more times as you please. So long as only Official Samsung firmwares are used, KNOX will never be triggered.
I have flashed countless times on my S7E and it hasn't broke yet lol. I am running TMO 7.0 Nougat firmware on my Verizon branded S7E (SM-G935V) right now.
In a few weeks, I'm planning to gift it to my friend for her birthday. Since she has AT&T, I will simply download and flash the latest AT&T 7.0 Nougat firmware via Odin. If she decides to change carrier to Verizon or TMobile later on, I would just have to help her reflash the corresponding firmware via Odin. No biggy whatsoever. :cyclops:
So I've spent a few hours searching XDA to find the right resources on how to flash a different U.S. carrier's GS7 Edge firmware on the T-Mobile branded device. I found out that since all the internal hardware for all U.S. devices are identical, I'd be able to flash any one carrier's firmware on to any carrier's device, provided there are no inconsistencies with the bootloader versions of the firmwares.
The phone is intended for an extended family member and I am able to purchase a T-Mobile GS7 Edge for significantly cheaper than from any other carrier. Because it will be used on AT&T's network, I wanted to make sure I got everything right before I get started. I either want to flash the AT&T version which will allow it to be fully compatible on the network, or the Unlocked version. Apparently, the unlocked version is completely debloated since it's not associated with any carrier and provides better benchmarks, especially battery life, so I'm interested in that.
I've compiled the resources I need in the following:
https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
https://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281
https://forum.xda-developers.com/tmobile-s7-edge/help/installed-sm-g935u-sm-g935t-firmware-t3482945
https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246
https://forum.xda-developers.com/verizon-s7-edge/how-to/odin-stock-nougat-firmware-t3570156
https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686
http://updato.com/firmware-archive-select-model?q=SM-G935U&order=date&dir=desc&exact=1
etc.
One question I have is whether I am able to flash the Unlocked firmware at all. I don't currently have the device in hand so I can't check the baseband version, but my understanding is that the Unlocked version is currently on a lower bootloader version whereas it is v4 for AT&T or T.Mobile. This would mean I would be able unable to flash the Unlocked firmware if the device already has a higher version of the bootloader, right? Conversely, I would be able to do so if the T-Mobile bootloader was on the same version as the Unlocked version (e.g., if the device hasn't had an update to its bootloader).. The same issue would arise if I wanted to go back to a carrier firmware. Where can I find a list of T-Mobile firmwares and their bootloader versions so that I can check? Threads I've searched are saying I can't go to 935U from 935A/T because of mismatching bootloaders but others are saying I can go back to 935A/T on Nougat (same bootloader versions?) so clarification would be greatly appreciated.
Edit: Just discovered the bootloader version can be determined by looking at the 9th character in the baseband version. Pretty simple!
Another question I have is whether flashing the AT&T firmware will give me VoLTE, Wifi Calling, tethering, etc. on AT&T's network. I've established that if I flashed the Unlocked firmware, I'll lose these functions (unless I root the phone, but that's a no-go since I need Samsung Pay intact). Just wanted to make sure that I would retain these features if I flashed the AT&T firmware on the T-Mobile device. Also, would I receive all OTAs pushed from AT&T while I'm on their firmware, even though it was a T-Mobile device? Or would I have to manually update it somehow?
Many thanks in advance.
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
justda said:
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
Click to expand...
Click to collapse
^^^^^this man is correct. Also, is the device you want to flash Carrier unlocked? Even though youre flashing a different carriers firmware or even the U firmware I believe the IMEI still needs to be unlocked from the original carrier. Obviously just pop the at&t sim card in the t mobile phone to see if its unlocked. hope this helps.
black96ss said:
^^^^^this man is correct. Also, is the device you want to flash Carrier unlocked? Even though youre flashing a different carriers firmware or even the U firmware I believe the IMEI still needs to be unlocked from the original carrier. Obviously just pop the at&t sim card in the t mobile phone to see if its unlocked. hope this helps.
Click to expand...
Click to collapse
Yes, it'll be unlocked, so there won't be problems there. If I flash the AT&T firmware and not the Unlocked firmware, I will retain video calling, yes?
justda said:
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
Click to expand...
Click to collapse
If I flash the current version of the Unlocked firmware, can I go back to AT&T's or T-Mobile's firmware?
Synchronicities said:
Yes, it'll be unlocked, so there won't be problems there. If I flash the AT&T firmware and not the Unlocked firmware, I will retain video calling, yes?
Click to expand...
Click to collapse
flashing the at&t firmware will just be like having an original at&t s7 edge so yes. The Unlocked firmware will be lighter with no video calling(no carrier apps, no carrier boot animation, some of the quick toggles will be different) you will retain VOLTE HD calling, wifi calling(if at&t has that) and with the at&t you will have all the bloat (about 2-3 GB of used storage plus more a tad bit more use on ram usage) which will use more battery. remember like stated above, if you do decide to flash the U firmware, make sure you flash the latest At&t CP being you will have better coverage since youll be on the at&t network.
Synchronicities said:
If I flash the current version of the Unlocked firmware, can I go back to AT&T's or T-Mobile's firmware?
Click to expand...
Click to collapse
I was able to flash back to T mobile from the U, I never tried anything with a At&t variant or the at&t firmware
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
cnewsgrp said:
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
Click to expand...
Click to collapse
Can someone review and comment?
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
black96ss said:
flashing the at&t firmware will just be like having an original at&t s7 edge so yes. The Unlocked firmware will be lighter with no video calling(no carrier apps, no carrier boot animation, some of the quick toggles will be different) you will retain VOLTE HD calling, wifi calling(if at&t has that) and with the at&t you will have all the bloat (about 2-3 GB of used storage plus more a tad bit more use on ram usage) which will use more battery. remember like stated above, if you do decide to flash the U firmware, make sure you flash the latest At&t CP being you will have better coverage since youll be on the at&t network.
I was able to flash back to T mobile from the U, I never tried anything with a At&t variant or the at&t firmware
Click to expand...
Click to collapse
Does Android Pay work on "U" firmware?
Should I get CP from here => https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
I this a good thread for instructions to install U firmware on T => https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
cnewsgrp said:
Can someone review and comment?
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
Does Android Pay work on "U" firmware?
Should I get CP from here => https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
I this a good thread for instructions to install U firmware on T => https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
Click to expand...
Click to collapse
Yes and yes
Sent from my SM-G955U1 using XDA-Developers Legacy app
cnewsgrp said:
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
Click to expand...
Click to collapse
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
pierre3408 said:
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
Click to expand...
Click to collapse
Thanks! I am almost ready. Final checks
- I downloaded 935U firmware from here https://forum.xda-developers.com/tmobile-s7-edge/how-to/4-28-t-mobile-935-firmware-t3597866 (File is G935UUEU4BQD2_G935UOYM4BQD2_TMB.zip)
- I am planning to use ODIN 3.12.7
- Since I am on ATT Network I will use ATT Radio (CP File). I downloaded ATT firmware from here => https://forum.xda-developers.com/att-s7-edge/how-to/odin-files-to-s4bqc2-g935a-t3582874
I will use this CP => CP_G935AUCS4BQC2_CL10280464_QB12904088_REV02_user_low_ship_MULTI_CERT.tar
Am I doing everything right?
Should I just flash all U files (including Radio) and flash ATT Radio later?
Please advise
Hi team
I have the tmo ime version of the s7 edge, but flash the ATT firmware BQC2 and now I can not go back to tmobile firmware or the U firmware I got the following error in Odin:
Error device info
Who can help me,?I going to gift my s7 edge to my brother and he is on Tmobile network
Galaxy S7 active
I have a at&t Galaxy S7 active unlocked and i transfer my service to T-Mobile but I am not able to get updates can I flash T-Mobile firmware so I can have the T-Mobile interface and updates. What do I need to do to get the updates.
All US variants can flash the firmware interchangeably. Just download the corresponding firmware and flash everything(Except for the modem if you'd want to keep the original modem). You dont need anything special. If the default odin dont work, then try the comey "cracked" version.
Eric1084 said:
All US variants can flash the firmware interchangeably. Just download the corresponding firmware and flash everything(Except for the modem if you'd want to keep the original modem). You dont need anything special. If the default odin dont work, then try the comey "cracked" version.
Click to expand...
Click to collapse
Why is it that we use the CP for AT&T; however, use the Unlocked CP for TMobile? Are the radios the same for the unlocked and T-Mobile variants? Where would I get this information if I needed it in the future?
I have a GS7 edge locked to T-Mobile with the Device Unlock app. Will flashing G9350U firmware unlock my device and bypass the Device Unlock app or will I still need to use this app to unlock?
Radios are different. I flashed ATT Radio after I flashed U firmware. Though honestly I cannot tell the difference
cnewsgrp said:
Radios are different. I flashed ATT Radio after I flashed U firmware. Though honestly I cannot tell the difference
Click to expand...
Click to collapse
you did the sae thing that I am currently doing. going from tmobile (I believe) to AT&T firmware. I am going from verison (which shouldn't matter) but when I did it the first time odin 3.12.7 gave me a message of success after only one "sector" of the whole thing went green. but the phone rebooted to an error message. did I do something wrong? help??
Shadow_Sheik said:
you did the sae thing that I am currently doing. going from tmobile (I believe) to AT&T firmware. I am going from verison (which shouldn't matter) but when I did it the first time odin 3.12.7 gave me a message of success after only one "sector" of the whole thing went green. but the phone rebooted to an error message. did I do something wrong? help??
Click to expand...
Click to collapse
Sorry not an expert, but I read several times here to use Price COmsy ODIN and I use that one. Please try
OTA Update is not working after changing to U firmware.
I had stock T Mobile last firwmare installed, but I was sick of poor battery and lag
so installed this firmware https://forum.xda-developers.com/tmobile-s7-edge/how-to/6-8-t-mobile-935u-firmware-qe2-t3619151, full wipe.
Now I have worst battery performance. 12% draining overnight (6 hours) without touching the phone at all. It shows a new update but it fails when I OTA update. looks like the update it's being installed but fails at the end. Don't know what's wrong but totally hate battery.
Edit: Android pay is also not working..
pierre3408 said:
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
Click to expand...
Click to collapse
What pit file did you flash? Did you flash the the pit file Odin pulls from your phone? Did you flash an att specific pit file?
I got the official Oreo on the u firmware, does anyone else have it and what are your thoughts i.e. Battery and screen on time, it seems a little faster to me.
cmlucht said:
I got the official Oreo on the u firmware, does anyone else have it and what are your thoughts i.e. Battery and screen on time, it seems a little faster to me.
Click to expand...
Click to collapse
I just flashed the stock Oreo G935UUEU4CRG2 firmware (Vzw) today. I will run it bone stock for a week and report back. I should be able to tell if there's a significant difference in battery life and performance from the stock V firmware because I've never rooted my S7 edge and have run the stock Verizon firmware since new. With this Oreo U firmware, I do hate how Samsung Pay has that quick launch edge feature at the bottom of the homescreen that can't be removed.
I am very interested in the U version of the firmware . I have the Verizon Galaxy S7 Edge G935V w/ Android 8.0 but use it on Straight Talk with their AT&T sim card.
I had to change it from CDMA to GSM, also had to add a new APN for Straight talk.
It works but the phone is missing LTE bands 12 and 17. Band 17 is used in my area and without it the phone connects
to a different band and its weak in my area.
I am trying to learn if I can put the G935U (AT&T) firmware on the G935V and will I get band 17.
I know band 17 is in my area because of my previous phone of a week ago, Nexus 5.
Would you know if it can be done, and where would I find recent info how to do this
along with what bands and features would be offered or not available.
Thanks,
Ken
tx_dbs_tx said:
I just flashed the stock Oreo G935UUEU4CRG2 firmware (Vzw) today. I will run it bone stock for a week and report back. I should be able to tell if there's a significant difference in battery life and performance from the stock V firmware because I've never rooted my S7 edge and have run the stock Verizon firmware since new. With this Oreo U firmware, I do hate how Samsung Pay has that quick launch edge feature at the bottom of the homescreen that can't be removed.
Click to expand...
Click to collapse
On my G935V, flashed with U Nougat firmware I have received the Oreo U upgrade.
It works great, the only issue is that it reverted the LTE bands to the typical V version bands. I had to re-activate the other LTE bands, just because... I can. My provider is still a Verizon MVNO, and VoLTE is working.
What I like about the Oreo is the Bluetooth codecs - besides the aptX and Samsung HD (UHQ) now Google provided native support for LDAC (Sony). I couldn't wait to get that, because I really wanted my Sony's MDR-1ABT headphones to be used in their full glory (LDAC codec).
PS: To appreciate the quality difference you need to listen to FLAC files.
KenKK said:
I am very interested in the U version of the firmware . I have the Verizon Galaxy S7 Edge G935V w/ Android 8.0 but use it on Straight Talk with their AT&T sim card.
I had to change it from CDMA to GSM, also had to add a new APN for Straight talk.
It works but the phone is missing LTE bands 12 and 17. Band 17 is used in my area and without it the phone connects
to a different band and its weak in my area.
I am trying to learn if I can put the G935U (AT&T) firmware on the G935V and will I get band 17.
I know band 17 is in my area because of my previous phone of a week ago, Nexus 5.
Would you know if it can be done, and where would I find recent info how to do this
along with what bands and features would be offered or not available.
Thanks,
Ken
Click to expand...
Click to collapse
Ken, first check out the supported bands between the Verizon and the AT&T S7 edge in the link below. It will confirm the discrepancy in supported bands between the two models.
https://www.phonemore.com/compare/p...5v-vs-samsung-galaxy-s7-edge-sm-g935a/3296028
Then go to this link and download, extract and Odin flash the AT&T "U" firmware and see if that will open up the AT&T bands for your Verizon S7 edge. It very well might. I think you should also choose the option in Odin to "Clear EFS" before you flash so that it can be rewritten fresh upon bootup with your AT&T sim card. Do this and report back your results. Good luck.
https://updato.com/firmware-archive-select-model?record=0A1AF06A906411E89F15FA163EE8F90B
Thank you for your reply.
I am downloading the firmware G935U (AT&T) firmware now. Its going to take several hours because I am not a member of that download site.
I did he A/B comparison and both phones seem to be identical except for the band coverage. The AT&T has band 12 which from my reading
is 700MHz and it includes the segment band 17 has so if I understand it right if I have band 12 I should be in good shape.
It also seems to have all the bands of the 935V except for band 13. The 935A has actually more bands of coverage.
Could you clear something up for me. Once I do this I am reading I can't go back to the Version S7 Edge G935V.
However would I be able to convert it to one of the other carriers like T-mobile ?
You are the first that stated to check the EFS box.
With ODIN I will be choosing all 4 files but making sure I do NOT choose the HOME file, is that correct?
After flashing are there any other special instructions I need to do or will the phone right after flashing just
need to go through the normal setup along with possible adding the same APN config I am using with it on Straight talk w/ the straight talk AT&T sim?
thank you,
Ken
tx_dbs_tx said:
Ken, first check out the supported bands between the Verizon and the AT&T S7 edge in the link below. It will confirm the discrepancy in supported bands between the two models.
https://www.phonemore.com/compare/p...5v-vs-samsung-galaxy-s7-edge-sm-g935a/3296028
Then go to this link and download, extract and Odin flash the AT&T "U" firmware and see if that will open up the AT&T bands for your Verizon S7 edge. It very well might. I think you should also choose the option in Odin to "Clear EFS" before you flash so that it can be rewritten fresh upon bootup with your AT&T sim card. Do this and report back your results. Good luck.
https://updato.com/firmware-archive-select-model?record=0A1AF06A906411E89F15FA163EE8F90B
Click to expand...
Click to collapse
KenKK said:
Thank you for your reply.
I am downloading the firmware G935U (AT&T) firmware now. Its going to take several hours because I am not a member of that download site.
I did he A/B comparison and both phones seem to be identical except for the band coverage. The AT&T has band 12 which from my reading
is 700MHz and it includes the segment band 17 has so if I understand it right if I have band 12 I should be in good shape.
It also seems to have all the bands of the 935V except for band 13. The 935A has actually more bands of coverage.
Could you clear something up for me. Once I do this I am reading I can't go back to the Version S7 Edge G935V.
However would I be able to convert it to one of the other carriers like T-mobile ?
You are the first that stated to check the EFS box.
With ODIN I will be choosing all 4 files but making sure I do NOT choose the HOME file, is that correct?
After flashing are there any other special instructions I need to do or will the phone right after flashing just
need to go through the normal setup along with possible adding the same APN config I am using with it on Straight talk w/ the straight talk AT&T sim?
thank you,
Ken
Click to expand...
Click to collapse
Yes you can go back to the stock verizon firmware.
There's two csc files in the firmware pack CSC_HOME will not wipe everything and the regular CSC wipes everything. You need to choose the regular CSC so it wipes everything. So backup your internal storage if needed. You may or may not need to manually enter your straight talk APN. Your SIM and APN should be detected upon first boot. Just make sure you choose the regular CSC file and not the CSC_HOME. You want to wipe everything and start fresh. If your APN doesn't automatically populate after flashing the rom then enter it manually. You should have no problems with this version of the U firmware.
G935V to G935U (AT&T)
If its written I have not found it yet but it would be nice to have a before and after as far as what you will gain and what you will loose after the firmware flash. It would cut down
on all the follow up questions, especially for me.
After flashing, you said I can return to stock firmware. Its strange I am reading you cannot return due to a BL that will not be compatible anymore with the Verizon firmware.
The G935V has been taking updates when it was on Verizon. Will this continue after changing it from a G935V (Verizon) to a G935U (AT&T) while on Straight Talk with their AT&T sim?
Does this G935U (AT&T) flash change any specific characteristics of the phone like its serial number and model #? I ask because the Samsung Smart Switch program besides
backing up your phone can also return it to stock (in case something corrupts it) and I am wondering if I give it the current serial# and model number G935V, will there be any problems since its model number firmware will be different.
I was advised when using ODIN under "Options" to check "Phone EFS Clear" . Does this still sound right. All other settings should stay as is.
Thank you,
Ken
tx_dbs_tx said:
Yes you can go back to the stock verizon firmware.
There's two csc files in the firmware pack CSC_HOME will not wipe everything and the regular CSC wipes everything. You need to choose the regular CSC so it wipes everything. So backup your internal storage if needed. You may or may not need to manually enter your straight talk APN. Your SIM and APN should be detected upon first boot. Just make sure you choose the regular CSC file and not the CSC_HOME. You want to wipe everything and start fresh. If your APN doesn't automatically populate after flashing the rom then enter it manually. You should have no problems with this version of the U firmware.
Click to expand...
Click to collapse
Q: After flashing, you said I can return to stock firmware. Its strange I am reading you cannot return due to a BL that will not be compatible anymore with the Verizon firmware.
A: When you flash a different U.S. firmware it has a bootloader included in the firmware. They can be flashed between the different U.S. firmware with no issue. the only time you may not be able to flash a firmware and bootloader is when you attempt to "downgrade your firmware to an earlier version.
Q: The G935V has been taking updates when it was on Verizon. Will this continue after changing it from a G935V (Verizon) to a G935U (AT&T) while on Straight Talk with their AT&T sim?
A: Yes, but the updates may not come as often as the carrier version of the firmwares such as Verizon, sprint, T-Mobile or AT&T. But you will get updates. It seems the carrier firmware will bring more frequent security patch updates than the "U" firmware.
Q: Does this G935U (AT&T) flash change any specific characteristics of the phone like its serial number and model #? I ask because the Samsung Smart Switch program besides
backing up your phone can also return it to stock (in case something corrupts it) and I am wondering if I give it the current serial# and model number G935V, will there be any problems since its model number firmware will be different.
A: No. The model#, IMEI, etc will not be affected. Only the software version will be affected as well as carrier specific update compatibility will be lost due to the "U" firmware.
Q: I was advised when using ODIN under "Options" to check "Phone EFS Clear" . Does this still sound right. All other settings should stay as is.
A: Yes. If you are having issues with network configs, you can choose to wipe efs so that it will rebuild upon first boot of the new firmware. This is only recommended if you have issues connecting to the network. Otherwise don't do it.
Since I'm on a roll I have another quesiton,
I dd a side by side comparison on this site
https://www.phonemore.com/compare/p...5u-vs-samsung-galaxy-s7-edge-sm-g935a/5532054
The phone called G935U has several more bands than the 935A (AT&T). Would this be a different G935U flash as compared
to the G935U (AT&T) ? If so would that not be the firmware to go with? It covers CDMA as well as GSM with the extra GSM bands.
This would be very similar to my G935V which offers CDMA and GSM.
Do I have it right NO CDMA capabilities on the G935U (AT&T) firmware?
Thank you for your replies its been very helpful. Its been a mystery trying to find out
what features you end up with with G935U and if their is a non provider version like in the above link.
Thank you
Ken
tx_dbs_tx said:
Q: After flashing, you said I can return to stock firmware. Its strange I am reading you cannot return due to a BL that will not be compatible anymore with the Verizon firmware.
A: When you flash a different U.S. firmware it has a bootloader included in the firmware. They can be flashed between the different U.S. firmware with no issue. the only time you may not be able to flash a firmware and bootloader is when you attempt to "downgrade your firmware to an earlier version.
Q: The G935V has been taking updates when it was on Verizon. Will this continue after changing it from a G935V (Verizon) to a G935U (AT&T) while on Straight Talk with their AT&T sim?
A: Yes, but the updates may not come as often as the carrier version of the firmwares such as Verizon, sprint, T-Mobile or AT&T. But you will get updates. It seems the carrier firmware will bring more frequent security patch updates than the "U" firmware.
Q: Does this G935U (AT&T) flash change any specific characteristics of the phone like its serial number and model #? I ask because the Samsung Smart Switch program besides
backing up your phone can also return it to stock (in case something corrupts it) and I am wondering if I give it the current serial# and model number G935V, will there be any problems since its model number firmware will be different.
A: No. The model#, IMEI, etc will not be affected. Only the software version will be affected as well as carrier specific update compatibility will be lost due to the "U" firmware.
Q: I was advised when using ODIN under "Options" to check "Phone EFS Clear" . Does this still sound right. All other settings should stay as is.
A: Yes. If you are having issues with network configs, you can choose to wipe efs so that it will rebuild upon first boot of the new firmware. This is only recommended if you have issues connecting to the network. Otherwise don't do it.
Click to expand...
Click to collapse
G935U Product Code USC vs. G935U (AT&T
Last night I flashed my G935U. It took 3 tries with the 3rd working after switching to a different ODIN reversion.
The phone works fine, no issues except I am disappointed I lost all the CDMA capabilities should I want to try straight talk with a Verizon sim.
After I flashed the file from the updato.com site I searched and found another G935U with Product Code USC. USA
https://updato.com/firmware-archive-select-model?record=05B44581906411E89F15FA163EE8F90B
A little more research and I found this is the unbranded version (correct me if I am wrong) The unbranded version appears
to retain CDMA plus have more GSM bands than the G935U (AT&T)
Could anyone offer some details on this firmware and could I have flashed this instead of the G935U (AT&T) to have retained
the CDMA and get more GSM bands.
Thanks, Ken
tx_dbs_tx said:
Ken, first check out the supported bands between the Verizon and the AT&T S7 edge in the link below. It will confirm the discrepancy in supported bands between the two models.
https://www.phonemore.com/compare/p...5v-vs-samsung-galaxy-s7-edge-sm-g935a/3296028
Then go to this link and download, extract and Odin flash the AT&T "U" firmware and see if that will open up the AT&T bands for your Verizon S7 edge. It very well might. I think you should also choose the option in Odin to "Clear EFS" before you flash so that it can be rewritten fresh upon bootup with your AT&T sim card. Do this and report back your results. Good luck.
https://updato.com/firmware-archive-select-model?record=0A1AF06A906411E89F15FA163EE8F90B
Click to expand...
Click to collapse
In my experience flashing another version will not add the bands. My case - I have flashed the "U" version on my "V" branded S7 Edge and the bands remained for Verizon. The modem firmware will read something that is flashed in the modem hardware and activate only those bands. There is a way to force other bands (see below).
More so, having the "U" Nougat, with modded LTE bands, I got the "U" Oreo upgrade from Samsung. After the upgrade to the "U" Oreo, the LTE bands reverted to the "V" ones (I had to re-enable them again).
I did "force" in the NV the new bands on my V using QPST and QXD professional Qualcomm tools, but since I don't really have a T-Mobile SIM I can't verify if the change works or it is something hardware (like RF amps) that is really missing.
How to: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
The stock value for the "V" hardware, in the NV cell #6828 is 4190. That corresponds to LTE bands 2,3,4,5,7,13 (check with the LTE calculator).
I have changed the value to 2062440470751 that corresponds to bands 1,2,3,4,5,7,8,12,13,20,25,26,29,30,38,39,40,41 (close to what U would have natively). Again, I couldn't test if the software change is sufficient for them to actually work, but I have a feeling it does not.
When I traveled recently to EU, I have used cellmapper to check the LTE bands. I never saw B20, even if, on the map of that country, B20 was available in that rural location. I had only 3G.
G935U vs G935U
I posted the wrong link
This is the one I have my question on
https://www.phonemore.com/compare/p...5u-vs-samsung-galaxy-s7-edge-sm-g935a/5532054
This compares a G935U vs. a G935A
To get to the chase, what firmware would I flash to get the features of the G935U (left picture)
I just flashed my phone with the G935U (AT&T) and although it works fine with no AT&T bloatware it is missing
some of the GSM bands of the G935U (Left picture) and all of the CDMA bands.
Thank you,
Ken
Like I said above, the different firmware does NOT change the LTE bands.
KenKK said:
Last night I flashed my G935U. It took 3 tries with the 3rd working after switching to a different ODIN reversion.
The phone works fine, no issues except I am disappointed I lost all the CDMA capabilities should I want to try straight talk with a Verizon sim.
After I flashed the file from the updato.com site I searched and found another G935U with Product Code USC. USA
https://updato.com/firmware-archive-select-model?record=05B44581906411E89F15FA163EE8F90B
A little more research and I found this is the unbranded version (correct me if I am wrong) The unbranded version appears
to retain CDMA plus have more GSM bands than the G935U (AT&T)
Could anyone offer some details on this firmware and could I have flashed this instead of the G935U (AT&T) to have retained
the CDMA and get more GSM bands.
Thanks, Ken
Click to expand...
Click to collapse
G935U with Product Code USC is the "U.S. Cellular" network. I believe the way it works is the software will use the installed SIM to configure the network compatibility mode that will be available in network settings. The true "U" model of the S7 edge will have hard coded support for whichever bands samsung determines for that model number. The different versions of the "U" firmware are specific for whichever carrier/network the phone will be used on. I'm not sure which firmware would allow both GSM and CDMA networks to function simultaneously, but there is an app in google Play store called "network mode" and you could give it a try and see if it will open up simultaneous GSM/CDMA support in your network settings. I do know that Sprint's firmware does have GSM and CDMA support and I'm familiar with that because I have had sprint for nearly 10 years and have a lot of experience with the samsung software as I've built several ROM's including port ROM's over the past few years. Try the Sprint "XAS" firmware. That's the global version.
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.