Device bootloop - LeEco Le Pro3 Questions & Answers

Hello. My device reboot into TWRP only after reboot (TWRP or System). I tried to reset data into AICP ROM in settings. Install again ROM don't works. Also restore from backup dont works. Help me :/
seems like this one trouble;
https://forum.xda-developers.com/note-4/help/sdcard-empty-installing-rom-t3030736
will try flash the stock one after night. If anybody knows solution, please help me.

After 356 milions of flashing twrp and wiping my phone finally update.zip (stock OS) transfered into phone (earlier still bugs). Then transfered stock.img (image of stock recovery) into phone and flashed it and... My backup worked. I'm embarrased. Will charge my phone and try to update to the lastest version. Then I'll check that my phone have stock or twrp of recovery. Idk what happened last night!
I could install the stock ROM (i had stock recovery and custom ROM). After boot, device runs ~40 sec then rebooting. In recovery i did clean data, then the stock OS works fine.

Related

Help,D801 reboots into twrp and not into rom

So I was on a early January build of Mahdi Roms. I decided today to update it. I was told to wipe everything flash the radio zip, cloudy rom. let it boot up then flash the new mahdi rom.
However, im on twrp 2.6.3. and when i flashed the radio and flashed the stock rom it booted up into twrp instead. I tried wiping and reflashing but it failed. I tried to reboot but it said my device isnt rooted and need to install SU so i swiped to continue however my device froze on the LG logo for about 10+ minute. So here I am still with no working phone for about 2 hours
any idea as to what to do?

i9505 doens´t boot after flashing stock firmware

Hello
I was trying to update my friend´s i9505 to the latest AntaresOne CM12 build, but forgot to flash gapps, and since i coulnd´t for some reason enter CWM (the phone just reboots), i had to flash stock firmware over again so i could start over.
But now the phone isn´t booting even on stock firmware. That usually did the trick.
The wierd thing is that Phils Touch Recovery was working before, but ever since i used Triangle Away to reset binary counter, the recovery won´t boot up anymore.
The only way that i could get into Phils Recovery was to install the TWRP recovery installer, and throught the app i would tell it to flash, and it would reboot into Phils Recovery
Now since system isn´t booting, i can´t install and use the TWRP installer to reboot into recovery mode for me.
Tried to flash stock recovery, the same thing happens: the phone just black screens, vibrates and reboots.
Any ideas of why this might be happening?
Go to stock recovery if you can and wipe data/factory reset. Install stock ROM then.
@guguts
As clearly wrote in 1st post of my thread, you need to do "format /system" before installing ROM's builds starting from 26/11 one and latest ones, including 3/12 and the ones that will come in the future.
I strongly suggest you to take a look again at installation instructions, but this time carefully.
If you need anything else, write directly in its Q&A thread (you can find it in this section) where surely you can be helped more and better
Inviato dal mio GT-I9505
Flash a custom recovery with Odin. Uncheck auto-reboot before flashing.
Then boot into the recovery using the botton combo. Keep holding it as long as it takes to enter recovery.
Hey guys, i managed to work it out.
It was probably a loose vol up or home button, because i didn´t do anything but a few moments later i tried to enter stock recovery and it went fine.
The issue was not with the custom rom (which by the way is great, my friend says its running smooth).
The issue happened because i forgot to do i data wipe after installing the rom and prior to installing the stock rom.
So the stock ROM was trying to load using lollipop data and cache, and thats why it got stuck in the samsung logo.
As soon as i managed to enter stock recovery again, and made a data wipe, the stock room booted fine.
So i tried again, but this time didn´t forget to flash gapps, and even better, now Phils Recovery is booting up normally (go figure...)
So i formated /system and /data, flashed AntaresOne ROM and gapps, and everything went fine.
Just posting here in case anyone in the future goes througyht the same hassle.
Thank you so much for your work Antares.
Its people like you, quarx and pawtip (and many others top developers) that makes this community great.

[Q] Every Time I Try to Install A Custom ROM, When It Boots It Boots Back to TWRP

I am currently using TWRP 2.8.5.2.
I had previously used CM11 but wanted to flash Paranoid Android due to the calling bug. Did a Factory Reset (and then chose all options for Advanced Wipe) and tried to flash Paranoid Android but everytime I do it boots back to TWRP. Tried CM12 instead and the same happens.
Upon connecting my phone into my PC the only files I see inside the sdcard are the cm12 zip, gapp zip, and a folder named TWRP.
Can anyone recommend any solutions? I've been at it for the past few hours, thanks.
I am not an expert but.. If you are on nexus device Try flashing factory image. Then install recovery and root. And then what ever rom you want to install..

zuk z1 bootloop when flashing any rom

i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....

TWRP not booting system

I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Hi
Bibi if you’re still active on xda reply to this
Help me i got same issue with you. Can provide me with ur stock rom and stock recovery? And how to do. Thanks very much.
Bibicp said:
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Click to expand...
Click to collapse
Bibicp said:
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Click to expand...
Click to collapse
can you put a link where you find the stock recovery, cos i've restore stock recovery on twrp but my device keep booting to twrp

Categories

Resources