loading windows fail =( give someone image of original windows vista
streech said:
loading windows fail =( give someone image of original windows vista
Click to expand...
Click to collapse
Streech,
You have it on your HDD. To recover Vista, reboot and press Fn+F3 while rebooting. This should work .
thx, i have memory error =(
what is the error message exactly?
a lot errors and in Memory Diagnostic Tools - you have hardware problems...
(when windows loading type what winload.exe error, try diagnostic tools )
streech said:
a lot errors and in Memory Diagnostic Tools - you have hardware problems...
(when windows loading type what winload.exe error, try diagnostic tools )
Click to expand...
Click to collapse
I had the winload exe error when I bought the shift, but a simple FN+3 solved that
(diag tools wouldn't even load, lol)
Hi!
I was about to install windows 8 64 bit but when the installation hung up I realized that the dvd was corrupt. So I tried turning off my PC, but when that didn't work i turned it of manually. But when I tried again the "press any key to boot from cd or dvd" was missing. After that I tried to boot from BIOS with a windows 7 dvd, but that didn't work either. So now I installed windows 7 through a USB. And when the installation was finished I found out that the CD drive worked fine, I cud use it like nothing was wrong. so it doesn't work on BOOT but in windows it does
So my question is how do I fix this? How do to get the "Press any key to boot from cd or dvd" to come back?
Is this somting That I Can`t fix, are there anny thing wrong with the mother board?
seriously... Bring up the boot devices list and select CD/DVD Drive. or use USB if available.
You can press F11 while starting up to choose boot device...........
And then DVD drive
I have tried to boot up from the CD/DVD but the system skips it.
Something like fast boot enabled on bios?
Go into your BIOS settings and disable all of your boot devices except your CD/DVD drive... should be able to force boot to CD/DVD?
Are U installing on PC or a Tablet, if PC then post it specs.
if Tablet then which one.
Also Search/Google for windows development preview forum and find out ur answer.
Ur problem may be due to corrupt ISO or DVD as i also faced this problem, so downloaded the ISO again and problem solved.
Try running it in Virtual Machine for its integrity if u can.
Sent from my GT-S5570 using xda premium
instead of booting it from the DVD, why dont you just try it from the Flash Drive?
Hello all lumia owners ,with the release of windows phone internals there is a great rush to unlock bootloader and install custom rim.
In previous post I have posted about unlocking bootloader and enabling root access but what if you have bricked your lumia?
In That case Please read this thread and fix your lumia.
Lumia can be bricked by bad updating phone or disconnection in update or something else it might also be bricked by flashing custom Rom.
REQUIREMENTS
1.Windows Device Recovery Tool (WDRT)- Get it here
2.FFU image for your phone.(Larger than 1gb)(If you have custom rom then skip ffu image and jump to method 2) - check here
3.Drivers (Installed with WDRT)
Instruction
Method 1
1.Install WDRT and run it.
2.Dont Connect your phone, just click on I can''t find my device button.
3.Let it to Search for a Device.
4.Connect your device via USB cable.
4.Start Up your lumia by pressing power button.
5.If it is not starting,Struck on logo,or just a boot loop it can be read by WDRT.
6.WDRT will show device with unknown manufacturer, o's version etc.
7.Dont Flash software with it Just close it.
8.Go to http://www.lumiafirmware.com/info and read all instruction and follow it to manual flash flu file.
9.Wait Until all is done and reply if this fixed your lumia.
Method 2 (Easy)
If you didn bricked your device in flashing or unlocking bootloader then Its better to jump out method 1 as it is more easy for you.
Or if you have custom rom for your phone and not want to download full original ffu then stay here.
1. Install Windows device recovery tool.
2. Go to :
For 32bit window.
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool
For 64bit window.
C:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool
Or whatever install folder you selected.
3. Hold shift and right click on your mouse and click open command windows here.
4. Paste thor2 -mode uefiflash -ffufile " " in cmd and click enter.(This will start searching your phone)
4. Press And Hold Poweroff + Lower Volume Button (Dont release it if your phone turn on automatically)(Especially in Bootloop).
5. Connect your phone to PC ( of course using USB cable).
6. if it detect Your device it will take you to Flash Screen (Ignore errors as it appear becuase in ffu location we take " " and its completely normal.)
7. Run Windowsphone internals and now it will detect your phone in flash mode.
8. Now you can Flash Custom rom (if bootloader unlocked) or just flash stock ffu image (dont need unlocked bootloader.)
Done
I will try to find more and more method to fix brick lumia until then this method is best or just send device to service center if this didn't fixed.
Greetings;
the *.ffu file won't be found at: http://www.lumiafirmware.com/info (for most devices).
That's some misleading website info; copied to several tutorials.
Reference: "Tutorial: Unbrick Lumia Devices"
Considering your System drive is " C: "
Open: C:\Program Data\Microsoft\Packages\Products\RM-<Number>
* Where <Number> will be your device release model number.
Note: You can check Code & Release Model Number on the back of your phone by removing your battery.
Inside that folder you can see that you have some required files to recover your device from Bricked states.
i.e: the *.ffu file.
Hi,
My phone crashed during the bootloader unlock process. I think My hex codes were not in sync with the ffu.
Now my PC does not detect the phone enither does it vibrates or shows any activity on the screen.
When I tried the above methods, I get the following error message.
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -ffufile " "
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -ffufile
Process started Sat Jun 17 05:30:45 2017
Logging to file C:\Users\siddh\AppData\Local\Temp\thor2_win_20170617053045_ThreadId-10580.log
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
Operation took about 1 minute, 0 seconds.
THOR2_ERROR_NO_DEVICE_WITHIN_TIMEOUT
THOR2 1.8.2.18 exited with error code 84003 (0x14823)
Is there any way I can create a temporary bus between the phone and that thor utility to send a bootloader handshake?
Hi,
My phone crashed during the bootloader unlock process. I think My hex codes were not in sync with the ffu.
Now my PC does not detect the phone enither does it vibrates or shows any activity on the screen.
When I tried the above methods, I get the following error message.
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -ffufile " "
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -ffufile
Process started Sat Jun 17 05:30:45 2017
Logging to file C:\Users\siddh\AppData\Local\Temp\thor2_win_201706 17053045_ThreadId-10580.log
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
Operation took about 1 minute, 0 seconds.
THOR2_ERROR_NO_DEVICE_WITHIN_TIMEOUT
THOR2 1.8.2.18 exited with error code 84003 (0x14823)
what i do now? is that any way to recreat my lumia phone?
swapnilnaikwadi said:
Hi,
My phone crashed during the bootloader unlock process. I think My hex codes were not in sync with the ffu.
Now my PC does not detect the phone enither does it vibrates or shows any activity on the screen.
When I tried the above methods, I get the following error message.
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -mode uefiflash -ffufile " "
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode uefiflash -ffufile
Process started Sat Jun 17 05:30:45 2017
Logging to file C:\Users\siddh\AppData\Local\Temp\thor2_win_201706 17053045_ThreadId-10580.log
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
Operation took about 1 minute, 0 seconds.
THOR2_ERROR_NO_DEVICE_WITHIN_TIMEOUT
THOR2 1.8.2.18 exited with error code 84003 (0x14823)
what i do now? is that any way to recreat my lumia phone?
Click to expand...
Click to collapse
Same problem? did you find a solution?
YOU ARE THE MAN.
my 930 was bricked by wpinternals misuse and this simple guide fixed it!!
my nokia was completely dead, and you sir, saved my 930 with this recommended guide!!
rgxHost said:
Greetings;
the *.ffu file won't be found at: http://www.lumiafirmware.com/info (for most devices).
That's some misleading website info; copied to several tutorials.
Reference: "Tutorial: Unbrick Lumia Devices"
Considering your System drive is " C: "
Open: C:\Program Data\Microsoft\Packages\Products\RM-<Number>
* Where <Number> will be your device release model number.
Note: You can check Code & Release Model Number on the back of your phone by removing your battery.
Inside that folder you can see that you have some required files to recover your device from Bricked states.
i.e: the *.ffu file.
Click to expand...
Click to collapse
if it is possible to recover data from a damaged lumia, I do not want to lose data
Greetings; using Nokia firmware tool will reset your device to factory settings (on mine, reverts back to windows 8).
Best regards;
Hi all, i have a bricked lumia 1320 with samsung emmc. When i power it on, it says: unable to find boot options
This problem started when i downgraded from windows 10 mobile to lumia denim using WDRT. The flashing procedure went well and, at reboot, the error message appeared on screen.
i've tried with thor2, windows phone internals, WDRT to unbrick the device but i failed. Do you have other suggestions? I read that exists a way to restore the device using jtag or atf box but i don't want to buy a 100$ peripheral for a one-time procedure
I made a program that unbricks your device, recovers from QHSUSB_DLOAD, QHUSB_DLOAD.
It's called...
Windows Phone Unbrick Tool (WPUT)
It comes with an installer.
NOTE:
1. You should enter the license key that is provided in the License Agreement section (for checking that you are not a bot, so don't use autoinstaller!
2. You must download your emergency HEX and MBN files from lumiafirmware.com
3. You must specify the correct path to the HEX/MBN files otherwise the program will fail!
4. If the unbricking succeeds remove your battery from your device for 1 minute and put it back on
5. Charge the device for at least 30 minutes before turning it on!
6. Reflash your device with Windows Device Recovery Tool.
Download it here
b i t . l y / 2 O Y Q Z V R
(REMOVE THE SPACES)
gmirz2005 said:
I made a program that unbricks your device, recovers from QHSUSB_DLOAD, QHUSB_DLOAD.
It's called...
Windows Phone Unbrick Tool (WPUT)
It comes with an installer.
NOTE:
1. You should enter the license key that is provided in the License Agreement section (for checking that you are not a bot, so don't use autoinstaller!
2. You must download your emergency HEX and MBN files from lumiafirmware.com
3. You must specify the correct path to the HEX/MBN files otherwise the program will fail!
4. If the unbricking succeeds remove your battery from your device for 1 minute and put it back on
5. Charge the device for at least 30 minutes before turning it on!
6. Reflash your device with Windows Device Recovery Tool.
Download it here
b i t . l y / 2 O Y Q Z V R
Click to expand...
Click to collapse
Hi!
My lumia 635 has no .mbn and .hex extension files at lumiafirmwaredotcom, but .edp and .ede files.
I tried both but not working, runs 20seconds and "err connection not found"
My lumia when connected at usb is recognized as unkown device, dont know what do anymore
nhtmd2 said:
Hi!
My lumia 635 has no .mbn and .hex extension files at lumiafirmwaredotcom, but .edp and .ede files.
I tried both but not working, runs 20seconds and "err connection not found"
My lumia when connected at usb is recognized as unkown device, dont know what do anymore
Click to expand...
Click to collapse
OK, so what you need to do now is, to remove the battery of your phone and connect it to the computer.
As I am seeing the log of the program, it says that the device is not detected.
So try removing your battery, connect it to your computer, wait until the computer successfully installs the QH-USB Dloader driver.
Firstly, try repairing your phone by doing the following steps:
1. start CMD as administrator
2.type cd C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool
or if your pc is 32 bit OS, then type C:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool
3.now type the following thor2 -mode emergency -protocol sahara -hexfile edefile.ede -edfile edpfile.edp
4. do it for 5 times
5. disconnect the device
6. insert the battery
7. connect it to wall charger
8. wait 10 minutes, for it to charge
9. connect the device to PC
10. if the device shows the red flash screen, then you are good to go
11. if not, then remove the device from computer, disconnect the battery, reconnect the device to computer, launch WDRT
12. click My Device Is Not Detected
13. click LUMIA
14. if your device has been detected, it will be shown in WDRT (if not then retry the steps from 1 to 7 for several times)
15. click your device
16. wait until the device recovers from Emergency State
17. wait until your device reflashes
18. enjoy!
NOTE: All data is already lost and cannot be recovered as Windows Phones use secure erase, and no data recovery tool will be able to get the files back
SO FINGERS CROSSED TO ONEDRIVE BACKUP YOUR PHOTOS/VIDEOS and ELSE!
gmirz2005 said:
OK, so what you need to do now is, to remove the battery of your phone and connect it to the computer.
As I am seeing the log of the program, it says that the device is not detected.
So try removing your battery, connect it to your computer, wait until the computer successfully installs the QH-USB Dloader driver.
Firstly, try repairing your phone by doing the following steps:
1. start CMD as administrator
2.type cd C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool
or if your pc is 32 bit OS, then type C:\Program Files\Microsoft Care Suite\Windows Device Recovery Tool
3.now type the following thor2 -mode emergency -protocol sahara -hexfile edefile.ede -edfile edpfile.edp
4. do it for 5 times
5. disconnect the device
6. insert the battery
7. connect it to wall charger
8. wait 10 minutes, for it to charge
9. connect the device to PC
10. if the device shows the red flash screen, then you are good to go
11. if not, then remove the device from computer, disconnect the battery, reconnect the device to computer, launch WDRT
12. click My Device Is Not Detected
13. click LUMIA
14. if your device has been detected, it will be shown in WDRT (if not then retry the steps from 1 to 7 for several times)
15. click your device
16. wait until the device recovers from Emergency State
17. wait until your device reflashes
18. enjoy!
NOTE: All data is already lost and cannot be recovered as Windows Phones use secure erase, and no data recovery tool will be able to get the files back
SO FINGERS CROSSED TO ONEDRIVE BACKUP YOUR PHOTOS/VIDEOS and ELSE!
Click to expand...
Click to collapse
Oh man ty very much for your answer, im gonna try it out tomorrow night and come back here to give u feedback!
Sorry for the double quote here and in the other post.
Fingers crossed, thanks!
nhtmd2 said:
Oh man ty very much for your answer, im gonna try it out tomorrow night and come back here to give u feedback!
Sorry for the double quote here and in the other post.
Fingers crossed, thanks!
Click to expand...
Click to collapse
got it!
Waiting!...
Hope it works
I have a Nokia Lumia 1020 completely unresponsive buttons and screen, except for the Windows LED logo that lights up briefly when I plug it in. It is running wp8.1 and it doesn't have a removable battery
Any help would be greatly appreciated. I honestly don't mind if it needs to be completely wiped. I mostly just use it for the camera.
ChrisWilke said:
Any help would be greatly appreciated. I honestly don't mind if it needs to be completely wiped. I mostly just use it for the camera.
Click to expand...
Click to collapse
Try leaving your phone charging for 1 day.
After that connect it to WDRT (Windows Device Recovery Tool)
And start reflashing the software.
NOTE: If the WDRT doesn't detect it, try holdin POWER and VOLUME DOWN buttons for 15 secs, it will trigger a power-cycle.
https://forum.xda-developers.com/windows-phone-8/development/unbrick-dead-boot-lumia-jtag-t3872885
Does anybody know how to use this thor2 command?
Device authentication:
thor2 -mode rnd -do_authentication -sdauthenticationtype production -skip_com_scan -skip_gpt_check [-server saisec001.europe.nokia.com] [-securesessionfile mysession.sessionid]"
Click to expand...
Click to collapse
gmirz2005 said:
I made a program that unbricks your device, recovers from QHSUSB_DLOAD, QHUSB_DLOAD.
It's called...
Windows Phone Unbrick Tool (WPUT)
It comes with an installer.
NOTE:
1. You should enter the license key that is provided in the License Agreement section (for checking that you are not a bot, so don't use autoinstaller!
2. You must download your emergency HEX and MBN files from lumiafirmware.com
3. You must specify the correct path to the HEX/MBN files otherwise the program will fail!
4. If the unbricking succeeds remove your battery from your device for 1 minute and put it back on
5. Charge the device for at least 30 minutes before turning it on!
6. Reflash your device with Windows Device Recovery Tool.
Download it here
b i t . l y / 2 O Y Q Z V R
(REMOVE THE SPACES)
Click to expand...
Click to collapse
Thanks for your gr8 efforts - However How to find Hex and MBN files - how to identify and from where to download - can make life easy - please help i have - i have Lumia 532 - Product 059w980 - RM-1031
Y cant i get fastboot drivers to read in Windows 10. I have updated the software to the latest update. Developer options are turned on. USB configuration is set to file transfer. In a regular state Windows 10 readds the phone and I can access the contents of the phone. I opened a power shell (regular and as admin) I typed "adb devices" it reads. (I have enabled advanced reboot.) I use the command "adb reboot-bootloader" in boots to fastboot. Now it loses connection. I Open the Run dialog box by pressing Windows Key+R. Type “devmgmt.msc” besides Android is a yellow triangle, then click Update Driver.A new window will pop up. Select the ‘Browse my computer for driver software’ option. I copied the drivers from the OnePlus 5 folder. Try to install but nothing. This is where in stuck. Please help. Thanks
trulane said:
Y cant i get fastboot drivers to read in Windows 10. I have updated the software to the latest update. Developer options are turned on. USB configuration is set to file transfer. In a regular state Windows 10 readds the phone and I can access the contents of the phone. I opened a power shell (regular and as admin) I typed "adb devices" it reads. (I have enabled advanced reboot.) I use the command "adb reboot-bootloader" in boots to fastboot. Now it loses connection. I Open the Run dialog box by pressing Windows Key+R. Type “devmgmt.msc” besides Android is a yellow triangle, then click Update Driver.A new window will pop up. Select the ‘Browse my computer for driver software’ option. I copied the drivers from the OnePlus 5 folder. Try to install but nothing. This is where in stuck. Please help. Thanks
Click to expand...
Click to collapse
Hello, please use the drivers provided here if not tried yet https://forum.xda-developers.com/on...k-bootloader-flash-twrp-t3624877/post72748916
Thanks that's the guide I used 2 flash, n install magisk. I jus used one of the options that was listed on the computer, I was a random Google drivers. Then it lit up. Thanks 4 the guide, it was very helpful
Done
Hey guys,
On jan 2021 I've installed windows 10 cracked version in my hp laptop. Later than i got issue during use of dev apps. Now I want to switch back to official version of windows 10.
I've created windows 10 bootable usb from media creation tool. But I'm not able to boot it. I pressed F9 key and select usb on boot option than my pc stuck on hp logo in boot loop.
I also tried to reset but got an error (no recovery environment) also tried to advance startup got no reset option there. Please find the bios setting and error images as attachment.
Thanks for help in advance.
Nikhilll_mishra said:
Hey guys,
On jan 2021 I've installed windows 10 cracked version in my hp laptop. Later than i got issue during use of dev apps. Now I want to switch back to official version of windows 10.
I've created windows 10 bootable usb from media creation tool. But I'm not able to boot it. I pressed F9 key and select usb on boot option than my pc stuck on hp logo in boot loop.
I also tried to reset but got an error (no recovery environment) also tried to advance startup got no reset option there. Please find the bios setting and error images as attachment.
Thanks for help in advance.
Click to expand...
Click to collapse
i think you are using a bad program for making a bootable iso.the best program i think its rufus-1.3.4 for making a bootable iso win10 or win7 i will attached it here for you.i hope it will help.
just unzip the file and run the program after you insert your usb drive or sdcard
If the BIOS is well set and the flashable USB is ok (Rufus or Media Creation Tool -> follow online guides) turn poweron the notebook and by pressing F9 with the pendrive inserted select the last option "USB Hard Drive - SanDisk Cruzer Blade" than the Windows 10 logo should appear immediatly, and than the Win 10 installation menu.
Download the latest version of the BIOS and UEFI firmware on your PC, and unplug all the other USB drives connected to the device.
Will on windows, open pendrive and execute setup.exe. Check if start.