Hiya. I managed to unlock bootloader/install twrp and root and went to see if i can put it back to stock.
When i try and sideload the stock firmware, my pc wont recognize adb while it's in sideload mode but it does in normal state.
I also get these errors (see pics)
I have tried installing all the drivers/changed usb ports but now i have no clue what it can be.
Any help please?
Thanks
PS. Using Windows 10
I'm having the exact same issue and I'm also really interested in a solution for this. Also tried uninstalling and reinstalling the drivers and switched USB Ports. The device gets detected without any problems in fastboot mode but as soon as I switch to Sideload Mode in stock recovery, Win 10 shows me this error and doesn't detect my device for sideloading.
Temporarily I could flash TWRP and sideload the zip via TWRP and cmd but I would also like to be able doing it without TWRP again.
Thanks in advance.
Can't anybody help us?
Just download the latest Android Studio software it contains the last ADB driver, i had the same issues after installing reboot, and ADB sideload will work !
http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Related
Hello,
So a few days ago my nexus 4 got a virus that started hijacking my text messages and made it so that the phone would not mount as mass storage to a computer. Also adb wouldn't work and i did have usb debug on. Anyway so I have TWRP installed so I just did a storage format totally wiping android and the virus from the phone. After I did that I tried pushing a nandroid backup that I have over and adb told me that the device was not found. I tried pushing the file in the bootloader, the recovery and when its trying to boot an android that's not there. Then I tried re-installing all of the usb drivers and adb. Still nothing. The I tried the adb sideload in TWRP. Still nothing. So dose anyone have any ideas about what this could be?
Thanks a bunch,
You can't use adb commands in fastboot. You should be able to do an adb push while sitting in recovery; don't use sideload unless you are sideloading something. If you can't get it to work, flash a rom and do it from within android.
So I deleted everything in my phone, including the Rom I wanted to flash (smart, right?) and all I have is TWRP Recovery mode and Download Mode. When I put my phone into any mode, my PC does not recognize it and I therefor cannot fix it... I've tried it on three computers with downloading and updating the drivers. The first time it works after installing and updating the drivers, but when I put it in the second time it does not work. I need to unplug my phone in download mode while doing the LG program, and the computer won't recognize or find my phone. All help is greatly appreciated and thanks to repliers in advance
Day 2 of not having a phone: I can't do this xD I need to fix it somehow, if anyone can help me please do
Boot to recovery and start adb sideload mode. Then from your computer just adb sideload rom.zip
If your phone doesnt install the drivers once in sideload mode then manually search for the adb bridge driver from the android sdk and install it.
x714x said:
Boot to recovery and start adb sideload mode. Then from your computer just adb sideload rom.zip
If your phone doesnt install the drivers once in sideload mode then manually search for the adb bridge driver from the android sdk and install it.
Click to expand...
Click to collapse
Tried that and it would say "device not found." and other error codes. One time I was able to load my device onto the computer and after it completed the CM 11 transfer it stopped. I may have to order an OTG cable or something...
Dear people of xda,
Recenlty ive receive a FOTA update to my device which runs 4.2.2. Being stupid, i did the update although i had cwm recovery installed on my devices. Now my device keeps bootlooping into cwm without being able to do anything.
Ive read tons of threads talking about this issue but i still cant get my to boot normally.
Yingy in this thread http://forum.xda-developers.com/showthread.php?t=2563527 had the same problem but the only diffrence is my pc cant recognize my device in order to do the adb fix by thecubed.
Im plugging my G2 for the first time in this computer and that is why i think my pc is failing to install drivers. I downloaded and instellad latest driver although windows device manger shows error devices not detected and the end of the process.
In order to fix my phone i just need to make me pc recognize my phone in adb although phone was never plugged before to this pc so i think my G2 wont let it access. I tried installing universal driver such as Pdanet as offered in threat but still when i write adb devices in cmd i get device offline!
Download latest adb drviers, lates lg g2 driver, lg user support tool does not recognize plugged device as well. All me sdk manger tools are patched to latest version.
PLEASE ive tried anything possible. spend like 9 hours and still nothing. i would really appriciate your help.
Thanks.
Edit: here my problem with pdanet drivers, it asks me to allow pc usb debbuging as shown in screenshot below but icant do it since im stuck at cwm recovery!
Solved!
BOOM!! after 12 hours i FINALLY manged to solved this problem. Really simple actually lol.
If anyone come across the issue please do the following:
1. Go to clockwork recovery as always, go to install zip from sdcard, choose install zip from sideload.
2. Plug your phone to pc.
3. Run adb with lastest drivers and sdk tools.
4. At the adb folder press shift+right click and start cmd.
5. write adb devices it should show your device id like this (xxxxxxxxx sideload).
6.Download latest twrp recovery from here http://teamw.in/project/twrp2/197 and if you have open europe version G2 like me download latest version from here: http://techerrata.com/browse/twrp2/g2d802
7.put the zip file in the adb folder, do not unzip it.
8. write in cmd console adb sideload xxxx.zip (xxxx is the name of twrp file).
9. cwm will flash twrp recovery over cwm.
10. reboot in recovery in advanced options.
11. now you have twrp recovery.
12. follow this guide : http://forum.xda-developers.com/showthread.php?t=2451696&nocache=1
13. THATS IT!!!
finally after going through this mess, im never using cwm recovery again. twrp is the best
good luck everyone!
I really need help, I have tried the following, having TWRP V2.8.5.1 functioning and Fastboot also.
- Through TWRP, tried connecting the PC so I can Flash a ROM from there, but I can't seem to be able to connect the One to my PC so it will let me transfer files through cmd with adb push. My computer is a windows 10 OS with Samsung drivers and Android SDK full installed, still can't get it to work.
- Through Fastboot tried flashing cm-11-20141008-SNAPSHOT-M11-bacon.zip downloaded from Cyanogenmod page and using Oneplus One Toolkit 2.0, even though the Toolkit says the files are there, still phone continues to show 1+ logo and then rebooting.
Please I need some help.
Cheers. and thank you.
Why adb push when you can just copy the file over using a file manager (or a command prompt if you insist) and then flash from the internal storage?
I'm having the same issue but in my case I can boot into recovery or other stuff IF I HAVE THE USB PLUGGED IN
Maybe you can check and and let me know, if I found a solution I'll tell you, hoping the same from you please.
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 this could help.
I hope someone in here can help me with the following problem:
I had an old Android version on my X720, which I wanted to update/install LineAge custom ROM with Android 10 on. Since the old Android was acting weird and USB debugging couldnt be enabled for some reason, I decided to wipe the System/Cache on it using TWRP recovery BECAUSE the device wasnt found on Windows 7 when plugging in via USB. Previously I installed ADB drivers and everything needed, but still Windows couldnt find the device and I was unable to move the Lineage ROM (plus GApps) to the device to be able to install it via TWRP. Anyway, now there is no OS installed and I can only boot into TWRP. I tried to ADB sideload the Lineage ROM via TWRP (via connected USB to my Notebook), but after typing "adb devices" and "adb sideload path...." etc. in Windows Terminal as Admin I always get "no devices found". So, when connecting the device to my Notebook, nothing is shown and the device doesnt appear under "Device Manager" and I think that's the main problem.
Does anyone have any solution or idea? Thanks a lot in advance!
try reading this useful thread:
https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
good luck!