hello fellow users, Im in desperate need of assistance, I been trying to restore/update my phone to the latest or using odin 3.12 but everytime I put the .Md5 on the AP section it says passed phone reboot to recovery I get a screen with a circle that says erasing, then I get into recovery to be greeted with this :
no Support SINGLE-SKU
Supported API: 3
dm-verity error...
I tried using the same buid QC1 and even the latest QF6, with the same results, Im tryin to start fresh I was rooted but I had massive battery drain and phone getting hot without use, so I been trying to restore without luck... anyone out here that can shed some light?
If you are using the "official" odin, try switching to the comey version (there should be download link in the rooting thread). Make sure you are downloading the correct firmware. If that doesn't work, you can load up smartswitch and click "Emergency Firmware Reinstall" or something along that line.
Related
My Sprint Note 3 has been out of commission for over 24 hours now, and I have resorted to begging you fine people for help.
I've been rooted running the unofficial cyanogenmod lollipop rom for awhile now, and yesterday I decided to flash back to the stock recovery/rom due to some issues with my network.
When I try to use odin to flash CF-autoroot it fails at writing the cache, on my phone it says "unsupport dev_type"
When I try to use odin to flash the stock recovery/rom "N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar" odin fails at "aboot.mbn"
I can't boot to recovery because i get a message that says "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
I obviously have no idea what im doing. Any ideas?
porkchopperur said:
My Sprint Note 3 has been out of commission for over 24 hours now, and I have resorted to begging you fine people for help.
I've been rooted running the unofficial cyanogenmod lollipop rom for awhile now, and yesterday I decided to flash back to the stock recovery/rom due to some issues with my network.
When I try to use odin to flash CF-autoroot it fails at writing the cache, on my phone it says "unsupport dev_type"
When I try to use odin to flash the stock recovery/rom "N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar" odin fails at "aboot.mbn"
I can't boot to recovery because i get a message that says "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
I obviously have no idea what im doing. Any ideas?
Click to expand...
Click to collapse
HI boot in "download mod" and flash a stock rom via odin pc
I took the OC3 update but install failed. I'm stuck in boot loop. Recovery reads:
Android system recovery <3e>
LRX22C.I337UCUGOC3
the button reads
#MANUAL MODE#
--Applying Multi-CSC...
Applied the csc-cide : ATT
remove failed file '/system/csc_contents' (Read-only file system)
Any help please
You are a new member here and I don't know your level of experience with phone modifications, so I'm going to make some assumptions.
Don't know if you can, but if you can boot into stock recovery, you should try performing a wipe data/factory reset.
What we would probably do in your situation is to use desktop Odin to flash the most recent stock firmware that is available, which is I337UCUFNB1 KitKat 4.4. After doing that, you could either try the over the air update process again, and it may work successfully, or you can upgrade to I337UCUFNJ4 KitKat 4.4 or to I337UCUFOC3 Lollipop 5.0.1 manually.
A good starting place is this thread. The instructions there are fairly clear, but you may need to do a little study and reading to get enough background information. There is a lot of information already in the forum here. You should be fairly confident that you understand what you are doing before you proceed.
Thank you for the response. I have tried the hard rest with no change. I have tried flashing back with Odin. Odin will connect with the phone but the connection drops at the first reset.
I have tried to restore with kies but kies does not recognize the phone.
I have also tried to flash with a new rom on the SD card. That has not worked either. I believe the problem is with the csc file but I have no idea how to fix it.
Sent from my Z812 using XDA Free mobile app
mrclarendon said:
I have tried flashing back with Odin. Odin will connect with the phone but the connection drops at the first reset.
Click to expand...
Click to collapse
How are you using Odin? I don't understand what you mean by "the connection drops at the first reset."
The procedure is:
Open Odin on the desktop.
Put phone into download mode and connect to the computer via USB cable.
Odin will recognize the phone. Message area should say "Added."
Place the firmware .tar.md5 file in the PDA slot (AP slot on newer versions of Odin)
Make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
Press Start.
If the flash is not successful, copy and paste the results from the message area into a post.
By the way, you are flashing AT&T firmware, and CSC should not be an issue, regardless of the message you read on the phone.
I am using Odin just as you described but before the file transfer is complete the USB connection is dropped (disconnected). The progress bar on the phone only shows about 10% and never finished.
I am using i337 firmware and have been for 18 months. I have flashed several ROMs with no trouble
Sent from my Z812 using XDA Free mobile app
My gf forgot her unlock pattern and her backup password on her N9005. I tried doing firmware install through ODIN but it failed and now the phone is displaying "firmware upgrade encountered an issue". I downloaded the firmware form Sammobile and tried flashing it several times, but no success. Phone enters download mode only, i am unable to get into recovery.
The GALAXY Note 3 LTE (SM-N9005) firmware is the one i tried flashing but i also noticed that there's a SM-N9005 (GALAXY NOTE3) so, i'm downloading that one to try (seems like the same though). Was wondering if that could be the problem why it keeps failing in ODIN?
Can you guys enlighten me or assist me in getting the device back up and running please. Many thanks in advance.
update guys: progress
I ODIN-ed TWRP to the device so now i have access to files and can install root, then flash a custom rom to get the device up and running again. I will try an official firmware flash through ODIN when i get the device up again.
I've been using my S8 G950F for one week (Nougat Stock, don't recall which specific rom, no root nor nothing) until it suddenly froze, tried to reboot but couldn't get past the Samsung logo screen. I tried to flash a stock firmware using Odin but got a Fail with the Device Info error which I could successfully fix with the so well known trick of getting back to download mode real quick.
Now I can flash any rom I want (downloaded from Updato) without any issues (PASS on odin), but no matter what ROM I flash I still can't get past the Samsung logo. I tried flashing both Nougat (AQF7 and AQL5), Oreo (CRAP, CRC7 and CRD7) using Oding 3.12.3 and 3.13.1 (for Oreo roms).
I also tried using Prince Comsy's Odin and once again got the Device Info error but using the same trick as before I could flash a Nougat rom but still can't get past the Samsung logo.
Is there anything I'm doing wrong? Should I flash any particular ROM or in a specific order? Should I try with other Odin version? KIES doesn't detect my device.
Any help is greatly appreciated! I just don't know what else to try and I can't find nobody nobody that has had the same issue I'm facing.
Thanks in advance! Any additional info you may need just ask me!
PS: one thing that caught my attention is that when I go to download mode it says: Knox 0x0 and "System Status: Custom". Is that alright?
hi
ive got a s8, which was rooted using magisk, but was having issue, so was advised to unroot, remote and try superSU instead.
in the process of flashing stock rom AND 8.0, the phone now boots up to black screen showing verification failed, only option to reset.
when i press reset, all it does is restarts, loads up TWRP which had been installed before,
TWRP runs some program and fails and then phone goes back to black screen showing verification failed.
ive booted it into download mode, in the hope that i can just start again by simply lashing fresh stock rom, but it connects to odin fine, but when i click start, it gives a red error every time.
so i cant access the standard recovery menu as ive got TWRP so that loads instead and it looks as that is corrupted and i cant flash new fresh rom from download as odin brings up issue
ive check another phone and there is no issue with odin or the usb-c cable,
there is an issue with the s8 and odin does not like something in the s8 so wont let me flash anything to it,
any advice would be greatly appreicated.
When you flashed the stock rom using odin did you flash a bootloader aswell as the rom or did you just flash the rom the problem might be that the bootloader was for pie and the rom is oreo or vice versa whenever I flash back to stock I fill all but one of the boxes in odin
i suspect it was all oreo, as i downloaded as a complete file but ill check and get back to you
thanks for advice.