Unfortunately, after the upgrade, Google now not responding to my questions. It only responds with text but not with voice.
And example to the question: what time is it ? The first time I was told, now only the script appears.
It is a bugs reported by several users on Italian forums.
Inviato dal mio zenfone 3
My build number is 1704.38_20170513 (android 7.0) and google now still work well.
After i update nougat only my camera has problem but when i restart it (several times), everything is fine.
Let's hope that ASUS will make an update to fix your problem or someone can help. Good luck.
Thanks, my build is ww_14.2020.1704.38_20170513
Did you make a clean installation? Factory reset or simple update via ota?
Inviato dal mio zenfone 3
sakubamba said:
Thanks, my build is ww_14.2020.1704.38_20170513
Did you make a clean installation? Factory reset or simple update via ota?
Inviato dal mio zenfone 3
Click to expand...
Click to collapse
I only update via OTA and after update i have to restart 3-4 times.
Yes. It is not working through bluetooth devices. If the screen is active, then it displays the results but you don't hear it back through the bluetooth device.
Related
Hi there,
5 minutes ago I received update for my L12 to Lollipop
Finally !!
Same here! Installed it and it's working
Enviado desde mi H60-L12 mediante Tapatalk
2clubbers said:
Hi there,
5 minutes ago I received update for my L12 to Lollipop
Finally !!
Click to expand...
Click to collapse
Did you have rooted rom before?
Inviato dal mio H60-L12 utilizzando Tapatalk
ilpratti said:
Did you have rooted rom before?
Inviato dal mio H60-L12 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes I had.
Now I need to do a root on Lollipop.
2clubbers said:
Hi there,
5 minutes ago I received update for my L12 to Lollipop
Finally !!
Click to expand...
Click to collapse
Hi,
Were you already on EMUI 3.0 ?
I bought the honor 6 L12, and I have no update, I have currently EMUI 2.3 B119, how can I go to Lollipop ?
Marc
2clubbers said:
Yes I had.
Now I need to do a root on Lollipop.
Click to expand...
Click to collapse
Just install twrp recovery with the multitool and then flash supersu.zip.
Yes I wan on EMUI 3.0 with firmware 5.8.5 I thinks so.
Update has ~850 MB.
2clubbers said:
Hi there,
5 minutes ago I received update for my L12 to Lollipop
Finally !!
Click to expand...
Click to collapse
Which version were you running before ? Stable B316 or a developer release ?
edit: you just replied that you were on 5.8.5, so I suspect you're not running official Stable Lollipop release now
H60-L12, B316
BartChampagne said:
Which version were you running before ? Stable B316 or a developer release ?
edit: you just replied that you were on 5.8.5, so I suspect you're not running official Stable Lollipop release now
H60-L12, B316
Click to expand...
Click to collapse
I don't know
Each time I have notification about update I do this
operation current?
Whoever updated to 5.1, can U please look at the operation current? 'cous I do not like battery drain of the 3.0. But android 5.1 supposed to be battery saving. So that it would be interesting to see the battery usage.
Please share OTA package in some way.
edit: I can understand it is not official release identified by Bxxx number.
android 5.1.1 for honor 6 H60-L12
I downloaded the 1st file(the 1st one that reads android 5.1_5.9.1.zip) on the following MEGA site: mega:///#F!itZwQZRS!foxJdEteQMn0fdXQWeag3g and unrar and place the folder "dload" to the root directory of sd card, go the settings, update, and choose local update, and that's it.
Funny thing to note, the update is quite lengthy and by the time the update process done, the honor 6 gets quite warm! However, after I restart, its very cool now, the update was done yesterday. Now I am on this Build No. EMUI3.1_H60-L12_5.9.1 and Android version is 5.1.1.
So far so good. Now looking for root.
yes battery life is also very good and butter smooth performance, wow.. i am at 5.9.1 developer edition.
Guys can u tell me tht, are the lock screen notification available in emui 3.1 as it was in stock Android 5.0 ?
I loved the stock Android 5.0 experience
But still not sure the emui 3.1 will deliver the same experience?
by beast HONOR6
sunnyrullzz said:
Guys can u tell me tht, are the lock screen notification available in emui 3.1 as it was in stock Android 5.0 ?
I loved the stock Android 5.0 experience
But still not sure the emui 3.1 will deliver the same experience?
by beast HONOR6
Click to expand...
Click to collapse
Yes,it does.
Sent from my H60-L02 using Tapatalk
Hello!
Can you tell me if it is possible install this version on the H60-L02 ? or is only for H60-12?
Many thanks,
Milastrix
Guys, these are not even real links (Mega) and no screens of phone info. I suspect scams... Be serious please
Where to find the right zip?
I received the update notification - I'm on EMUI 3.0 and custom recovery - but obviously it won't install because of my recovery, so I'm loking for the right zip to download.
My actual version: H60-L12V100R001CHNC00B313
Version to be installed: H60-L12 B313-B316, as it read on Update section of Phone information
Is it because I have a Chinese Honor 6?
I think I need a H60-L12V**************B316 version instead, don't you?
Zanbot3 said:
I received the update notification - I'm on EMUI 3.0 and custom recovery - but obviously it won't install because of my recovery, so I'm loking for the right zip to download.
My actual version: H60-L12V100R001CHNC00B313
Version to be installed: H60-L12 B313-B316, as it read on Update section of Phone information
Is it because I have a Chinese Honor 6?
I think I need a H60-L12V**************B316 version instead, don't you?
Click to expand...
Click to collapse
I had the same situation as you, and i did the direct update to the B532 version.
Please keep in mind that the phone has to be unrooted and has to have the stock recovery.
Extract this zip (https://mega.nz/#!XxYy3bjT!O2oYeVvrsi5SGPWevWi24xzS4zt_PiRjZyC-e6-W4A0) to the sdcard1 of your phone, and then use the manual update on your phone.
Crake said:
I had the same situation as you, and i did the direct update to the B532 version.
Please keep in mind that the phone has to be unrooted and has to have the stock recovery.
Extract this zip ------ to the sdcard1 of your phone, and then use the manual update on your phone.
Click to expand...
Click to collapse
I got to B316 and finally to B532 with stock recovery, obviously. Your link is the right one.
Than I installed a custom recovery in order to get the root again.
Thank you
I recently bought myself a Redmi Note 3 Pro Special Edition (Kate) for its ability to run an official build of CM13 and, importantly, because Kate offers Band 20 support - a major advantage for UK usage.
As you may realise, getting CM13 onto Kate is somewhat more complex than getting it running on Kenzo. This is due to both the bootloader not being able to be unlocked officially and also because the Radios in Kate are different to those in Kenzo.
After figuring everything out over the weekend, I managed to flash the Official Nightly CM13 onto my Kate device & everything ran perfectly!
I wrote up the process in my Blog in quite a bit of detail, so feel free to have a read if you wish to install CM13 on your Kate edition of the Redmi Note 3.
@mwarner mmm online you can find an version of CM13 for kate
http://blog.yam.com/amjads/article/171744431
Inviato dal mio Z2plus utilizzando Tapatalk
Naphtha said:
@mwarner mmm online you can find an version of CM13 for kate
Click to expand...
Click to collapse
My tutorial is very thorough - every step is taken into account, taking a phone as it would be out of the box running MIUI to having a fully working CM13 installed. If it wasn't complicated, I wouldn't have written a tutorial .
Thanks for the info though - the text and the ROM is all in Chinese but may be of use to someone.
Thank you for work. I will trying it till my kate comes. Doesn't band 20 and 8 work?
Gesendet von meinem Redmi Note 3 mit Tapatalk
mwarner said:
My tutorial is very thorough - every step is taken into account, taking a phone as it would be out of the box running MIUI to having a fully working CM13 installed. If it wasn't complicated, I wouldn't have written a tutorial .
Thanks for the info though - the text and the ROM is all in Chinese but may be of use to someone.
Click to expand...
Click to collapse
I don't believe is only in Chinese. Usually CM is multilanguage.
Inviato dal mio Z2plus utilizzando Tapatalk
A very well written and comprehensive guide, thanks! I've been seeing so many support requests all over the place that i'm still a bit hesitant to flash CM13. Have you noticed /ANY/ issues with hardware support? Dual sim, cameras, FP-reader? Is there anything that works worse on CM than MIUI7 stable?
Thanks again for a good guide, subscribed to your blog too
Sujejsjejej said:
Thank you for work. I will trying it till my kate comes. Doesn't band 20 and 8 work?
Click to expand...
Click to collapse
The Special Edition (Kate) phone supports the following bands:
LTE B1/2/3/4/5/7/8/20/28 ( 2100/1900/ 1800/ 1700/ 850/ 2600/ 900/ 800/ 700MHz)
Kenzo does not support Bands 2, 20 and 28.
kissamopo said:
A very well written and comprehensive guide, thanks! I've been seeing so many support requests all over the place that i'm still a bit hesitant to flash CM13. Have you noticed /ANY/ issues with hardware support? Dual sim, cameras, FP-reader? Is there anything that works worse on CM than MIUI7 stable?
Thanks again for a good guide, subscribed to your blog too
Click to expand...
Click to collapse
I must admit that the Note 3 is not my main phone - a Xiaomi Mi Max contains my primary SIM at the moment - so I have not tested it as much as I would like.
At this point (only having had the phone on CM13 for a few days) I have experienced one bug where I used the fingerprint sensor to unlock & the device unlocked, but to a black screen. Turning the screen off with the power button and then unlocking again with the fingerprint resolved this. I have only seen this once, but I did see it.
Generally, everything seems to work well - performance is great (smoother than MIUI) and both cameras and the fingerprint sensor work as expected. I haven't tried Dual SIM, or indeed a MicroSD card in the device, so I can't comment on this.
The bottom line is that it is a little too early for me to say whether I would use CM13 on the Note 3 if it was my primary phone. A safer bet is to use MIUI and set the phone up to turn off some of the oddities of MIUI. I posted about how I set up my phone here:
http://mikestechlife.blogspot.com/2016/10/guide-to-setting-up-xiaomi-miui-phone.html
On my main Mi Max I use Xiaomi.eu weekly on MIUI 8 with it set up as outlined above. CM13 only has partial supported on the Mi Max, so I don't want to go down this route with my Max.
That's quite the tutorial! Lots of good information there.
1. Xiaomi only support bootloader unlocking on Chinese Developer firmwares. There is NO Chinese firmware available for Kate - only Global ROMs. It is therefore impossible to officially unlock a Kate phone.
Click to expand...
Click to collapse
Not true, at least in my experience. I've officially unlocked my Kate using global dev MIUI8 v6.10.13. Followed these steps.. This particular MIUI release comes with a setting in the dev menu to check for unlocked bootloader and other things.
Now, I'm hoping I wasn't an exception, and officially unlocking Kate has now become just as easy for everyone.
Also, there's a ROM that's quite CM13-like and officially supports Kate and its radio. I come from a 2013 Moto G running CM13 nightlies and I don't miss CM13 after using this for a few days in my Kate. The experience is almost the same, and at least on my Kate, everything's running fine.
Too bad that Xiaomi is playing part lottery when making the phone, seems they can't be bothered to update their sources for all the part providers they're using. I guess we can't complain much when a phone of this caliber is so affordable.
I noticed that Xiaomi.eu have produced a build for Kate this week:
https://xiaomi.eu/community/threads/6-10-27.35843/
Cheers bud great tutorial.
I was using the latest Global Dev Rom and after the first boot loading TWRP it gave me a prompt for password. I could not access storage. Just fully wiped the device with TWRP/Advanced/Wipe Data and did the install. CM13 just booted on my device with a locked bootloader.
Biggie ups!
Does this work with cm 14 too?
Gesendet von meinem Redmi Note 3 mit Tapatalk
There is a developer ROM for kate? Would this not work for official unlock?
http://en.miui.com/download-301.html#449
Kate bootloader can be unlocked officially, I did it with mine on official global dev rom.
adamdabadboy said:
Kate bootloader can be unlocked officially, I did it with mine on official global dev rom.
Click to expand...
Click to collapse
how?
iakoboss7 said:
how?
Click to expand...
Click to collapse
go to en.miui.com/unlock/ and apply to unlock
Use updater to flash global dev rom
Settings -> additional settings -> developer options
enable OEM unlocking
mi unlock status -> register phone
enable usb debugging (not sure if necessary)
reboot into fastboot mode
use mi unlock tool to unlock bootloader
last time i tried the "mi unlock status -> register phone" it faild (and i tried many times and did allot of restarts). i tried it on 6.10.13, what version did you use?
Thanks for the Tutorial. When i flashed the rom with Alka Recovery, i had the error message Encryption was interrupted and can't be completed. With the ZCX Recovery it starts normally.
Has anyone tried this with CM14 or a 7.0 rom?
iakoboss7 said:
last time i tried the "mi unlock status -> register phone" it faild (and i tried many times and did allot of restarts). i tried it on 6.10.13, what version did you use?
Click to expand...
Click to collapse
I used 6.10.13, I'm not sure why you had that problem
I can't find any info on these:
eBay link:
http://www.ebay.com/itm/7-Android-5-1-Car-GPS-Navigation-Stereo-Radio-Player-WIFI-AM-FM-hands-free-Call-/382127607438?hash=item58f8948e8e:g:VTEAAOSwTf9ZQQLu
They are very slim and you can recess them all the way into your dash without having to cut up your dash kit to make the stereo fit through the opening.
It is amazing. I bought one simply because of this.
Model: Alps mid 1008l_emmc
Factory Settings Password: 44320
Unfortunately I can't seem to root it.
Also on mine at least, the touchscreen freezes upon waking up from standby.
Because of this I would love to be able to turn off standby mode, but there is no option.
It would be nice to know what options for modifications/tweaks/updates are possible for this unit. Here's some more info if that helps:
mcu is displayed as version 17.04.02_01_130
Also here is the build.prop if that helps in identifying what kind of hardware is in this thing. If others have ideas on ways to identify the hardware (mcu, etc) in this unit that does not involve opening the shell/case (though if I have to I will) I am willing to give it a try.
One Tough Unit to Root
6 months ago, I had Chinese Android Head Unit that was buggy to no end, so I returned it.
I saw this HU as I was looking for drone parts and decide to give it a try.
I've had success rooting every Android device I've owned since the Motorola A855 phone.
I tried every root apk out there, no luck.
Also worth noting, it's WiFi MAC changes every reboot, not good for MAC Whitelist filtering.
And the hardware MAC addy it claims to have comes up as Invalid address.
Hello everyone, it has given me great joy to check that car radio / gps starts to be commented and I hope that also studied its possibilities of ROOT and / or custom recovery, from that moment it will have an economic apparatus and very well mounted , agreed that it has some gaps as it is in the user manual instructions to bring out the "developer options" to mark the USB debugging.
Well, turning around I found an application (USB Debuging) that allows us to access it and mark the options of OEM Unlock and USB Debugging and hope that we start to find the right way.
Now let the cooks get into the game and let us have good news.
PD I attached my MTK_ProjectConfig.mk file from my device so that you can see the total of the original instructions so that you can get something clear from them.
Greetings.
ransu;
They are very slim and you can recess them all the way into your dash without having to cut up your dash kit to make the stereo fit through the opening.
It is amazing. I bought one simply because of this.
Model: Alps mid 1008l_emmc
Factory Settings Password: 44320
Unfortunately I can't seem to root it.
Also on mine at least said:
One more question, does anyone know how to enter recovery mode in this "gossip"?
Help would be appreciated:good:
Click to expand...
Click to collapse
Seems *awfully* cheap at $83 .....
Hi I bought this unit and managed to root with root genius Chinese version however still couldn't get su so installed king root and for some reason su is now there so fully rooted using root genius then king root hope this helps you guys.
The problems I'm having is sometimes it starts to black screen and have to pull fuse to get it back and a lot of settings are missing i.e. Bluetooth, instead I have an app ? I'm quite new to android and don't understand why some apps don't show like radio ect ?
Did anyone get any further with this? i have bought a different shape one, but has same Model "Alps mid1008I_emmc" with same Factory password.
https://forum.xda-developers.com/android-auto/android-head-units/bought-t3742612
ROOT
lmmerono said:
Hello everyone, it has given me great joy to check that car radio / gps starts to be commented and I hope that also studied its possibilities of ROOT and / or custom recovery, from that moment it will have an economic apparatus and very well mounted , agreed that it has some gaps as it is in the user manual instructions to bring out the "developer options" to mark the USB debugging.
Well, turning around I found an application (USB Debuging) that allows us to access it and mark the options of OEM Unlock and USB Debugging and hope that we start to find the right way.
Now let the cooks get into the game and let us have good news.
PD I attached my MTK_ProjectConfig.mk file from my device so that you can see the total of the original instructions so that you can get something clear from them.
Greetings.
Click to expand...
Click to collapse
Hi !
I got rooted!
Kingo root !
Why? I use kingo root,but it can't be rooted
HOW
szeeles said:
Hi !
I got rooted!
Kingo root !
Click to expand...
Click to collapse
Thanks for sharing your success but how ???
from PC or from Android ???
redrosen said:
Thanks for sharing your success but how ???
from PC or from Android ???
Click to expand...
Click to collapse
From Android !
How can you go in recovery mod?
Help...
Inviato dal mio Y6 MAX 3D utilizzando Tapatalk
---------- Post added at 05:57 PM ---------- Previous post was at 05:52 PM ----------
After root does not start help me !!!!
Inviato dal mio Y6 MAX 3D utilizzando Tapatalk
Help
Help me
Inviato dal mio Y6 MAX 3D utilizzando Tapatalk
Help me
Inviato dal mio Y6 MAX 3D utilizzando Tapatalk
Help
Inviato dal mio Y6 MAX 3D utilizzando Tapatalk
hi guys, I suggest you have tried various solutions suggested by google, without finding a valid solution, the problem is this, activating wifi hotspots to share the internet with the android tv kingbox device, trying to access the playstore me from connection error despite the browser and other apps work regularly, I tried with another phone, and the PlayStore works, and as if there were some locks that prevented my device from communicating with the PlayStore
Inviato dal mio ASUS_Z017D utilizzando Tapatalk
I recently got the unofficial LOS 17.1 running on my tablet and I realised that some apps aren't compatible with the current state of the tablet. I got twrp running on my tablet, but in the process I made my tablet think it's a x704a instead of x704v, which made a mess out of everything. Reason I did this is because its the twrp version which I can actually get working on this tablet. And now I would really like to get back to my previous rom but it's still a mystery to me how I got here in the first place. This is my first time rooting a device and I have no idea how to use QPST/QLIF or whatever it's called.
I downloaded the firmware from here: https://forum.xda-developers.com/thinkpad-tablet/general/stock-roms-verison-lenovo-tab4-10-t3921073 but I have no idea which files in the folder to use for the flashing. I also get sahara errors using QPST which I really don't know how to handle. Any help with this would be greatly appreciated
If possible I would also like my stock recovery back and if anyone could point me in the direction of where I could find one it would be great
Did you try Lenovo Moto Smart Assistant?
https://support.lenovo.com/bo/it/solutions/ht102605
Inviato dal mio moto g(8) plus utilizzando Tapatalk
It#' pretty easy. Just rollback to your backup, which you made before
Or you checkout the link. This looks like all versions of tab4 are included.
https://forum.xda-developers.com/thinkpad-tablet/general/stock-roms-verison-lenovo-tab4-10-t3921073