Hey guys. Just got my oneplus 5 and I love it. My only issue is how aggressively it goes from portrait to landscape. I tilt it not even 30 degrees and it goes into landscape which gets very annoying, fast.
Anyone experiencing this issue? Any fixes or ways to calibrate?
So I'm the only one who has the screen going to landscape all the time, with the slightest of tilts? Do I have a faulty device?
To reproduce the issue just take another phone and watch a YouTube video in portrait mode. Put both phones side by side and start tilting. The OnePlus 5 will switch to Landscape mode before the phone is horizontal. My s8+ only switches when my phone is in horizontal position.
Yeah i don't keep my rotation on all the time so I just checked it. Mine is fine too 45 degrees. Once I go more then that, it flips.
Could be your device
hi,
got my phone last week and have the same agressive behavior. Hope an update will fix that
There's actually a thread on the oneplus forum about it. I think it could be related to the inverted display #jellygate
same here, it's about the calibration of the orientation sensor... just stop it with the inverted display thing, i think the engineers at OnePlus know better than some of us about tech, they didn't do it unintentionally
mrnovanova said:
There's actually a thread on the oneplus forum about it. I think it could be related to the inverted display #jellygate
Click to expand...
Click to collapse
Can confirm this is happening to me too. The rotation is extremely sensitive
Related
I wonder if my unit is faulty. I find that the auto rotate does not work very well. It refuses to rotate sometimes, and the only way seems to be to shake it. But when I do so, sometimes the orientation is upside downs.
Am I alone with this problem?
Hi Steve, my auto rotate isn't totally perfect but i'd say its good enough and i certainly haven't had to shake it yet lol
I find sometimes you need to lift it up (as if taking a picture) to let gravity kick in on the sensor.
Just had a thought....I installed a compass app (i think on the first day i got the phone) and i had to move the phone in a figure 8 to calibrate it, maybe i calibrated mine without knowing? that is if it even uses the same sensor?
Oh well, may be the fact that it does not rotate well is a good thing when using on bed. I'm looking at the half full glass.
I just got my note and am having problems with auto rotate.
I ran the tests in *#0*#
It looks like they all passed fine
But sometimes mine rotates n it's own and when it rotates, it sticks in Horizontal.
I do not understand the calibration instructions for Horizontal and Gyroscope.
For instance, when it says place device on a level surface and press calibrate, does that mean just place it on it's back on a table? Also, after it is done calibrating, should the gyroscope "ball" on that page move when you move the device? Mine is always stationary.
On the horizontal calibration, how do you position the device before you hit the calibrate button? Should it be landscape or portrait?
IMO they don't explain these very well and it's confusing how to set this up.
Yes, just place it on a table or the floor. Not sure with the gyroscope since i don't have the Note yet, but i imagine the ball moves.
If this is a bug it's a software bug. All Desire HD owners including me had the auto rotate bug when it got released. These are bugs that's very common on freshly released Android devices, and it will get fixed.
BazookaAce said:
Yes, just place it on a table or the floor. Not sure with the gyroscope since i don't have the Note yet, but i imagine the ball moves.
If this is a bug it's a software bug. All Desire HD owners including me had the auto rotate bug when it got released. These are bugs that's very common on freshly released Android devices, and it will get fixed.
Click to expand...
Click to collapse
Here's the question I have:
I only have 30 days for return if it's broken. Nobody else has complained about auto rotate yet and I would think that would come out pretty fast. I figured out mine had a problem 30 seconds out of the box.
Hi les_garten (another maemo/TMO refugee here!) - I've had my note for over a week, haven't seen any spontaneous rotations at all. I calibrated my gyro on day 1 though I think you don't ned to unless you are having problems. Once calibrated, the blue ball just sits in the centre of the circles, it doesn't move at all.
_pigro_ said:
Hi les_garten (another maemo/TMO refugee here!) - I've had my note for over a week, haven't seen any spontaneous rotations at all. I calibrated my gyro on day 1 though I think you don't ned to unless you are having problems. Once calibrated, the blue ball just sits in the centre of the circles, it doesn't move at all.
Click to expand...
Click to collapse
Thanx for that info! Mine also rotates when I turn horizontal, then won't go back into portrait.
How do you do the Horizontal calibration. Do you stand it on it's edge in landscape mode?
I'll never give Nokia another Nickel! Great idea with dismal execution.
horizontal calibration just involves sitting it flat on a flat surface. After calibration the ball can be "rolled" across both axes - like I said above, for me at least the gyro calibration screen does not allow the ball to roll at all either before or after calibration (hope that's what's supposed to happen, I've never had a phone with a gyro before, I would have assumed the ball was meant to move in response to tilt/turn ....
_pigro_ said:
horizontal calibration just involves sitting it flat on a flat surface. After calibration the ball can be "rolled" across both axes - like I said above, for me at least the gyro calibration screen does not allow the ball to roll at all either before or after calibration (hope that's what's supposed to happen, I've never had a phone with a gyro before, I would have assumed the ball was meant to move in response to tilt/turn ....
Click to expand...
Click to collapse
if you go into the dialer and dial *#0*#
then do sensors and run the Gyro tests and graph, it seems to be fine.
I have to keep auto rotate off.
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I would hate to keep it if it is broke.
I have the auto rotate bug also...you need to try many times before it will rotate... kind of embarrsing.. but I am sure it will be fixed first..but sometimes I wonder..if samsung have tired the phone at all before they ship it...such fundamental feature should work...without any problems
blackstar84 said:
I have the auto rotate bug also...you need to try many times before it will rotate... kind of embarrsing.. but I am sure it will be fixed first..but sometimes I wonder..if samsung have tired the phone at all before they ship it...such fundamental feature should work...without any problems
Click to expand...
Click to collapse
For some strange reason this makes me feel better!
bug was solved in 2.3.6 ..works without problems now.
blackstar84 said:
bug was solved in 2.3.6 ..works without problems now.
Click to expand...
Click to collapse
Thanx. I just did mine last night as well.
Very happy now!
i just got a galaxy note 3 weeks ago and it is running gingerbread 2.3.6
i have the same problem for the auto rotation problem, when i test the gyro and horizontal calibration, the ball doesnt move or move in a very laggy motion, when i lever my phone to a certain angle in all direction, the ball will not move in some area of the display. i had calibrated once before it has this problem, the ball move smoothly in any angle...now my message will auto rotate to landscape while i holding it in potrait...please help
I can't actually help fix anything - but if you enter *#0*# in the dialer and then select "sensor" from the LCD tests, then "image test" (under accelerometer sensor) you'll get a picture of a dog whichshould rotate between portrait & landscape as you rotate the phone, and there is an overlayed real time display of x and y axis angles as registered by the accelerometer.
This test should at least show whether the h/w is working or not.
Fix here
http://forum.xda-developers.com/showthread.php?t=1592170
I can fix that.This is from galaxy S2 but i dont knows how for Note, i try and working for Note. But after install from CWM, i see Setting/Display/ Gyroscope calibrationand Horizontal calibration. It not working. I was very afraid and i flash new rom N7000ZSLPF---------4.0.3 http://hotfile.com/dl/156123968/e690f65/N7000ZSLPF_N7000OZSLPF_OZS.zip.html
And now Gyroscope not work but rotation is work good.
Sorry my English
auto rotat pro
dude plz helppp......................I have to keep auto rotate off.:crying::crying:
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I dont wat to do:crying::crying::crying::crying:
saad elahi said:
dude plz helppp......................I have to keep auto rotate off.:crying::crying:
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I dont wat to do:crying::crying::crying::crying:
Click to expand...
Click to collapse
Since you are on Rocket ROM, check here:
http://forum.xda-developers.com/showthread.php?p=30107755
I'm having a couple of issues / annoyances that I cannot seem to find fixes or work arounds for.
Are these normal things that everyone is experiencing or is it a problem just with my N4, and may need to be replaced?
My phone is stock, and un-rooted.
1. Camera (main) continuously refocuses when in camera app. It only locks for a few seconds after taping the screen. A bit annoying but workable. The problem arises in Skype (and I guess in any other app), when using the main (back) camera it continuously focuses and refocuses every couple of seconds which makes it almost useless when trying to use the main camera to show the person on the other end something.
Is there a way to lock the focus, or tweak how often it refocuses?
2. Light sensor sensitivity: When brightness is set to auto, the brightness bumps up and down every minute or 2. The sensor is too sensitive or the software is too aggressive. I'm stationary and lighting in the room is constant, but I guess slight angle changes in my hand are causing enough fluctuations to initiate an adjustment. And the adjustments aren't smooth, they are steps, so they get annoying after a while.
Besides switching off auto brightness, is there a way to tweak sensor sensitivity?
bump.
no one else has these issues or is annoyed by them?
trent25 said:
bump.
no one else has these issues or is annoyed by them?
Click to expand...
Click to collapse
I have the focusing issue too. In Camera if I tap the screen to focus on something, it stays there for 3-4 seconds and then re-focuses at the center of the screen. Very annoying.
For the light sensor, I found that the automatic brightness was awful so I changed to manual brightness. Easier than tweaking I guess
about the camera, i've got the same issues as you
Ok thanks for the replies. At least I know I'm not having a one off issue particular to my unit.
Both of these issues should be software related, hopefully they will come to someone's attention and get sorted out. They're not deal breakers but annoyances that shouldn't be there in a final product imo.
Google is working on a patch for the camera right now. Sit tight and we should have a fix coming soon
spitefulcheerio said:
Google is working on a patch for the camera right now. Sit tight and we should have a fix coming soon
Click to expand...
Click to collapse
Where did you hear that from?
Sent from my Nexus 4 using xda premium
Anyone have any problems with this? Sometimes it will get stuck in landscape. I'll have to go from portrait back to landscape to get it to rotate back to portrait
To narrow it down if I lock the phone in landscape the unlock it via fingerprint sensor it happens
Sent from my Nexus 6P using Tapatalk
it sometimes happens. And also another odd issue i noticed was then you are listening to music or watching videos in landscape and you rotate your phone 180 degrees upside down, the audio will stop for a split second and resumes. Is this a software flaw??
godlyitem said:
it sometimes happens. And also another odd issue i noticed was then you are listening to music or watching videos in landscape and you rotate your phone 180 degrees upside down, the audio will stop for a split second and resumes. Is this a software flaw??
Click to expand...
Click to collapse
No. It's the dual speakers. When the screen rotates the audio swaps speakers.... Because there channeled to a left and right speaker
Sent from my Nexus 6P using Tapatalk
Still feel like auto rotate is wonky. Like when I turn on the screen with finger print sensor its in landscape and has to rotate back..... Anyone???? Just seems different than owner phones I've had
Sent from my Nexus 6P using Tapatalk
Smallsmx3 said:
Still feel like auto rotate is wonky. Like when I turn on the screen with finger print sensor its in landscape and has to rotate back..... Anyone???? Just seems different than owner phones I've had
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yes, I've noticed the same. I wonder if the bug has already been submitted.
I can also confirm that it has happened on mine as well. It happens sometimes when I wake the phone.
Yes... I've been having the same issue. Doesn't happen too often, but it is rather annoying. Seems if I just rotate the device about 3/4 of a turn it will go back to normal. I thought maybe it was a faulty accelerometer, but hopefully it's just a software bug that will be fixed sooner or later.
Same here. Does not want to come back to portrait, needs to go to landscape shake to go back to normal...
Sent from my Nexus 6P using XDA Free mobile app
My Nexus 6P will not go into reverse portrait orientation at all - only portrait, landscape, and reverse landscape. I have to use a third-party app to achieve reverse portrait orientation.
myownnamewasalreadytaken said:
My Nexus 6P will not go into reverse portrait orientation at all - only portrait, landscape, and reverse landscape. I have to use a third-party app to achieve reverse portrait orientation.
Click to expand...
Click to collapse
I was able to fix this using GravityBox, in case anyone is interested.
myownnamewasalreadytaken said:
I was able to fix this using GravityBox, in case anyone is interested.
Click to expand...
Click to collapse
Same problem here, how did you fix it with GravityBox, pls!
+1 for this issue. Sometimes, when I launch a game its stuck in potrait mode. Only way to fix it is to exit the game rotate the screen to Landscape and relaunch it.
xdaniel91: There's a setting under "Display tweaks" called "Allow all rotations." I just checked the box next to this setting. I might have had to reboot.
Cataclysm has a similar setting under "Miscellaneous" called "Upside-down rotation."
Hello guys, what worked for me yesterday, it was letting fall down the phone against the asphalt by accident when i was getting out from the car. LOL
Some other people suggested a strong shock/hit as a fix in a google nexus forum, i cant attach the link yet.
I've been following this issue closely as I was impacted by it as well.
Here's the link to the Nexus Help forum:
https://productforums.google.com/forum/?utm_medium=email&utm_source=footer#!topic/nexus/ytCwNnOJEaM;context-place=topicsearchin/nexus/nexus$206p$20auto$20rotate
Here's a video I made of the issue:
https://youtu.be/TIF0QZkFIuQ?t=135
Lol sounds wrong but i did fix mine, i dropped my phone today from like 2cm high and my rotation stopped working...came to this thread and read your advice, dropped it again from like 1 cm height and my rotation started working again....so thanks!
"Hello guys, what worked for me yesterday, it was letting fall down the phone against the asphalt by accident when i was getting out from the car. LOL
Some other people suggested a strong shock/hit as a fix in a google nexus forum, i cant attach the link yet"
jpraider75 said:
Lol sounds wrong but i did fix mine, i dropped my phone today from like 2cm high and my rotation stopped working...came to this thread and read your advice, dropped it again from like 1 cm height and my rotation started working again....so thanks!
"Hello guys, what worked for me yesterday, it was letting fall down the phone against the asphalt by accident when i was getting out from the car. LOL
Some other people suggested a strong shock/hit as a fix in a google nexus forum, i cant attach the link yet"
Click to expand...
Click to collapse
Holy crap, that worked. My phone fell about 6 inches onto hard tile. Then auto rotate stopped working. I just tapped the phone on different corners on the same hard tile, and it's rotating again.
chamsao said:
Holy crap, that worked. My phone fell about 6 inches onto hard tile. Then auto rotate stopped working. I just tapped the phone on different corners on the same hard tile, and it's rotating again.
Click to expand...
Click to collapse
There's a tiny gyroscope chip on the main board. Contained inside it is a plate (critical mass) with contacts underneath that moves/slides on top of the chip's contacts. When you rotate the phone, the plate actually moves inside the tiny chip, and from there the x,y,z axis is calculated. In my best hillbilly mechanic voice "yer plate got stuck".
hawkswind1 said:
There's a tiny gyroscope chip on the main board. Contained inside it is a plate (critical mass) with contacts underneath that moves/slides on top of the chip's contacts. When you rotate the phone, the plate actually moves inside the tiny chip, and from there the x,y,z axis is calculated. In my best hillbilly mechanic voice "yer plate got stuck".
Click to expand...
Click to collapse
Mine has been getting stuck but dont think its the plate. Of course it began happening when I switched rom, flashed new bootloader, vendor AND started using a new launcher.
Fairly confident its not the launcher because no one else is complaining. Hitting/dropping the phone doesnt fix it but toggling auto rotate does. Ive tried every variation of set rotations in the settings of the rom and launcher but this has persisted over a week. Whats frustrating is itll go hours without the glitch (thinking its fixed) then it gets stuck in landscape.
Thats my boring story. If anyone has a fix please share. Thanks
I've had my nexus 6p for about two months now, and yesterday, something weird happened to my gyro sensor. It seems to be completely out of place, not allowing me to rotate my phone in any app in any way. Occurred to anyone else?
Mgrev said:
I've had my nexus 6p for about two months now, and yesterday, something weird happened to my gyro sensor. It seems to be completely out of place, not allowing me to rotate my phone in any app in any way. Occurred to anyone else?
Click to expand...
Click to collapse
The only related issue I've had is when it's laying flat and displaying in portrait, then I open an app and it opens in landscape. Kind of annoying.
I'd ensure rotation is enabled in display settings, and use an app like Sensors Multitool, under rotation vector it will tell you if the sensor is responding to movement at all. If it's not responding it's likely a stuck sensor. Either defective, stuck in position from a fall, or is held in place by static (in which case powering it off for 5 minutes should get it working again temporarily). If the app shows that it's responding to movement but still not rotating, I'd suggest a factory reset.
hawkswind1 said:
The only related issue I've had is when it's laying flat and displaying in portrait, then I open an app and it opens in landscape. Kind of annoying.
I'd ensure rotation is enabled in display settings, and use an app like Sensors Multitool, under rotation vector it will tell you if the sensor is responding to movement at all. If it's not responding it's likely a stuck sensor. Either defective, stuck in position from a fall, or is held in place by static (in which case powering it off for 5 minutes should get it working again temporarily). If the app shows that it's responding to movement but still not rotating, I'd suggest a factory reset.
Click to expand...
Click to collapse
i left it off for 12 hours and it works perfectly now!
Now that you mention it ive had issues with it locking in landscape--recently in past 24 hours. Havent looked too much into it but toggling auto rotate usually fixes it. Thought it was my launcher (recently switched to asap) but i dunno....never had this issue before yesterday--closest thing would be its TOO sensitive and switches mode with the slightest movement. But thats not the same as it locking up in landscape