Hi guys, I'm quite a big kali Linux fan and have been learning about it for a while and today I tried nethunter but am having issues. I flashed the zip and the kernel like advised but when booting up I'm on the kali Linux boot animation forever and it won't boot so I reverted to a twrp backup and everything is fine. I'm not sure what the issue is really but my current setup is carbon rom with franco kernel and magisk. I notice that nethunter installs supersu so not sure if that caused the issue or what. I'd like to have full functionality of nethunter but he able to use carbon rom and Franco kernel. I'm happy to switch to supersu if need be. Any help would be greatly appreciated. Thanks a lot!
DEVILOPS 007 said:
Hi guys, I'm quite a big kali Linux fan and have been learning about it for a while and today I tried nethunter but am having issues. I flashed the zip and the kernel like advised but when booting up I'm on the kali Linux boot animation forever and it won't boot so I reverted to a twrp backup and everything is fine. I'm not sure what the issue is really but my current setup is carbon rom with franco kernel and magisk. I notice that nethunter installs supersu so not sure if that caused the issue or what. I'd like to have full functionality of nethunter but he able to use carbon rom and Franco kernel. I'm happy to switch to supersu if need be. Any help would be greatly appreciated. Thanks a lot!
Click to expand...
Click to collapse
Search for this thread:
Kali Nethunter for any Android device
Related
For those who got problems with installation on v13.1 use the following guide it will help you all links below its from official sites not mirrors etc.
Steps for make sure you're not confused
1)reboot to twrp recovery or cwm
2)install magisk uninstaller zip
3)install unroot kenzo zip
4)install magisk v13.1
5) reboot device
6) install magisk manager if not installed automatically
7) attention before you use it keep your boot.img as a backup to restore it if you are not going to use a custom kernel read below the edit why thanks
Ps.worked perfectly on Nougat NOS release latest beta with radon kernel 5.1 hope to work on your ROM too
EDIT:When you use the nitrogen unroot zip in restore the nos kernel by Nougat version so on Miui and other ROMS of course if you dont use custom kernel take a backup of your current kernel just the boot part or just install the custom kernel like radon,agni after the whole steps etc sorry about that it just took me a while to find out cuz I just checked my kernel adiutor and I just saw the wild kernel of nitrogen on performance gov and it burned my hand almost xd
UPDATE:Try this unroot zip file first it doesn't going to mess with your kernel amd change it but if that doesn't work you have to do it with tge other way thanks for understanding :')
-->Download link press here<--
Kenzo unroot by NOS site (worked in Nougat with radon 5.1)check the update please before use this zip file
magisk uninstaller from official link by @topjohnwu
magisk v13.1 by official link of @topjohnwu
magisk manager 5.0.4 from official link of @topjohnwu
1. CM/AOSP without root (or unroot)
2. Flash Magisk 13.1 (Magisk Manager included, no need to remove the old one if you are using)
3. Done
Archmage1809 said:
1. CM/AOSP without root (or unroot)
2. Flash Magisk 13.1 (Magisk Manager included, no need to remove the old one if you are using)
3. Done
Click to expand...
Click to collapse
I talk about people who got problem with installation about error 1 since all roms got root they have to use an unroot zip as I just saw only new halogen os doesn't include root dont pretend the smart boy you can just ignore the post
i have problem with miui 8 developer rom, stuck in boot loading although i have dirty flashed rom
solo player said:
i have problem with miui 8 developer rom, stuck in boot loading although i have dirty flashed rom
Click to expand...
Click to collapse
Flash the kernel again and the problem will be solved I just figured out something just now cuz my device burned my hand almost xd
After install install magisk v13.1, Do I need to install phh-superuser-magisk-r266-2.zip?
After install install MagiskManager-v5.0.4.apk, Do I need to install Superuser_1.0.3.3.apk?
magisk v13.1 by official link of @topjohnwu not works on MIUI 8.3.0.5(MHOMEID).. Already tried and stuck at MI logo..
xmixmaster said:
Flash the kernel again and the problem will be solved I just figured out something just now cuz my device burned my hand almost xd
Click to expand...
Click to collapse
sadly it didn't work for me i have to wait for fix or another wokaround
jerung3000 said:
After install install magisk v13.1, Do I need to install phh-superuser-magisk-r266-2.zip?
After install install MagiskManager-v5.0.4.apk, Do I need to install Superuser_1.0.3.3.apk?
Click to expand...
Click to collapse
No it will autoroot your phone just check the steps I writed and pay attention on update I did
solo player said:
sadly it didn't work for me i have to wait for fix or another wokaround
Click to expand...
Click to collapse
What rom you got?
xmixmaster said:
What rom you got?
Click to expand...
Click to collapse
miui 8 7.7.6 developer rom
Do we really need this guide? Lol
I have installed superuser how can I replace it to magisk as safteynet check doesn't pass on superuser after Xposed installation.
I flashed Nitrogen 2 based on Orio in Redmi Note 3. How i can install / flash magisk .?
I root the same with Supersu
the module that is listed is download section of magisk will work in all phone or on the specific phone that is mentioned there?
links are down:cyclops:
Hi all,
maybe it is a dumb question or I am doing something wrong, but now I am facing a problem with losing root on Lineage os, when I use custom kernel. I use Magisk and flash everything through twrp recovery.
What I tried:
I completely wiped telephone, for to be 100% sure it is clean, so I went back to stock rom, lock bootloader.... and so on. After this I unlocked...root....
And even when I have only custom rom, without any additional apps only clean LOS, Magisk and custom kernel with developer app, for example Boeffla kernel and his app or from Flar2 elementalx kernel and his app and change something in their app, lets say frequency It automatically breaks root on next restart and after this root is not avaliable everytime when I boot up. I tried reflash magisk but without success. (And I am not using kernel for OOS on LOS, everytime the kernel is built for LOS)
On freedom OS 1.8 I dont face to this issue, for now I am on Freedom OS with Boeffla kernel and his app without problem. But really I am familiar more with LOS than OOS due to more clear system than OOS. (But this is my opinion :-])
Always I am using the newest versions - LOS - 02/10, Magisk 14.0....
And next note - I used LOS on OP3T with same settings and custom kernels without any issues only now on OP5 I have this problems.
Can you please tell what is wrong or if you have the same problem? Thank you for a help.
Hey guys, i just bought the phone and flashed zips immediately But have a question as i've never encrypted my phones till now(it's forced). So i'm on stock kernel and latest 4.5.14 Nolimits rom. Now I want to install xposed, bluspark kernel and remove the encryption from my device(i read something like a dm-verity disabler). Which order and method I should chose to flash those ? I saw something about decyrpted device in the first page of the rom's aroma installer and an option for the xposed but not sure and i don't want any bootloops
Thanks!
Followed this youtube guide --> How to Root Moto G4 Plus, Unlock Bootloader and Install Recovery!
(his youtube is gizmoddict, xda is restricting the link)
On last step I had to install the zip, and it would reboot into the phone, except it didn't.
xt1625 moto g4 is now stuck in a twrp bootloop and I have no idea what to do, help is appreciated.
If this is the guide in question: https://www.youtube.com/watch?v=dK2uacpjGwc then are you running stock Nougat 7.0 on your device?
If so, that guide is too old to be useful - the stock Nougat kernel appears to be much stricter with being rooted on and so you must use a custom kernel (e.g. ElementalX or vegito) to root successfully on stock Nougat. If you were running Marshmallow as in the guide, then it should have worked (though depending on the version of SuperSU you flashed).
I would try to copy a custom kernel to your device and attempt to flash that via TWRP, see if you can get your device to boot.
echo92 said:
If this is the guide in question: then are you running stock Nougat 7.0 on your device?
If so, that guide is too old to be useful - the stock Nougat kernel appears to be much stricter with being rooted on and so you must use a custom kernel (e.g. ElementalX or vegito) to root successfully on stock Nougat. If you were running Marshmallow as in the guide, then it should have worked (though depending on the version of SuperSU you flashed).
I would try to copy a custom kernel to your device and attempt to flash that via TWRP, see if you can get your device to boot.
Click to expand...
Click to collapse
Yes that would be the link to the video, and I believe it came stock as 7.0 nougat? (not 100% on that)
Currently searching XDA for the custom kernel you mentioned, sounds like it should be easy to get working thank you.
echo92 said:
If this is the guide in question: then are you running stock Nougat 7.0 on your device?
If so, that guide is too old to be useful - the stock Nougat kernel appears to be much stricter with being rooted on and so you must use a custom kernel (e.g. ElementalX or vegito) to root successfully on stock Nougat. If you were running Marshmallow as in the guide, then it should have worked (though depending on the version of SuperSU you flashed).
I would try to copy a custom kernel to your device and attempt to flash that via TWRP, see if you can get your device to boot.
Click to expand...
Click to collapse
In twrp and checked on pc to see that there is only twrp on internal storage, attempting to install ElementalX-G4-2.00.zip right now.
It worked thank you (atleast I think it is), currently selecting the MHz for the cpu frequency (obvious choice of stock). Appreciate the help.
NVM not working, now it won't boot into twrp. Not sure what in the world is going on anymore with this phone :/
NVM to that as well, 3rd time is the charm in twrp is back again.
Figured it out I think, it says "No OS Installed! Are you sure you wish to reboot?" after installing that zip file. Why does it say that?
Ok lineage OS is installed, super happy about it, thanks for suggesting that kernel thing otherwise I'd not have found this. Super easy to get rolling.
Recently i had a hard brick i had to do a recovery from. So far ive got everything back to working order with latest TWRP installed and everything is working with no problems since. But now I try to install Magisk through TWRP, have the latest version and Magisk manager installed, after its finished it dosent boot. I have to restore from my latest backup after. Also same thing happened when trying to install SuperSu. Anyway to fix this?
What firmware or ROM are you currently running, and what version of magisk are you using?
kwebber321 said:
Recently i had a hard brick i had to do a recovery from. So far ive got everything back to working order with latest TWRP installed and everything is working with no problems since. But now I try to install Magisk through TWRP, have the latest version and Magisk manager installed, after its finished it dosent boot. I have to restore from my latest backup after. Also same thing happened when trying to install SuperSu. Anyway to fix this?
Click to expand...
Click to collapse
Before you root your device, you must replace your stock kernel.
Most people use ElementalX.
https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836/page192
Flash ElementalX through twrp, go through setup and then flash magisk. You'll do good.
If you're confused about ElementalX setup, go through installation tutorials.
Cheers.
ALPH000 said:
Before you root your device, you must replace your stock kernel.
Most people use ElementalX.
https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836/page192
Flash ElementalX through twrp, go through setup and then flash magisk. You'll do good.
If you're confused about ElementalX setup, go through installation tutorials.
Cheers.
Click to expand...
Click to collapse
Is there a custom kernel known to be compatible with the stock Pie ROM?
harryspar said:
Is there a custom kernel known to be compatible with the stock Pie ROM?
Click to expand...
Click to collapse
Do you mean the stock Oreo firmware? We don't have stock Pie
If so, there's ElementalX 3.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 or Loony: https://forum.xda-developers.com/moto-g4-plus/development/3-10-108-loony-kernel-t3726793
echo92 said:
Do you mean the stock Oreo firmware? We don't have stock Pie
If so, there's ElementalX 3.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 or Loony: https://forum.xda-developers.com/moto-g4-plus/development/3-10-108-loony-kernel-t3726793
Click to expand...
Click to collapse
For Nougat, stock kernel is not rootable.
You have to replace it with elementalx kernel and then flash magisk.
However, when talking about Oreo stock firmware,
Situation gets inverted.
When flashed magisk with ElementalX 3.0.1, phone will not boot up.
And, stock kernel can be easily rooted by simply flashing magisk.
So, there is no need of ElemenralX kernel for rooting Oreo stock ROM unless you need it.
You're correct. I meant Oreo.
On my device it never works. Not on the stock kernel, or elemental, or loony.
It boot loops until I run the Magisk uninstaller.
harryspar said:
You're correct. I meant Oreo.
On my device it never works. Not on the stock kernel, or elemental, or loony.
It boot loops until I run the Magisk uninstaller.
Click to expand...
Click to collapse
Hmm, that's odd - are you using magisk 19.3 or a recent version of magisk? When you flashed magisk, did you wipe cache before rebooting?
Is this behaviour observed on completely stock firmware (i.e. you've restored back to full stock Oreo, including a clean stock boot kernel)?
echo92 said:
Hmm, that's odd - are you using magisk 19.3 or a recent version of magisk? When you flashed magisk, did you wipe cache before rebooting?
Is this behaviour observed on completely stock firmware (i.e. you've restored back to full stock Oreo, including a clean stock boot kernel)?
Click to expand...
Click to collapse
I think so. I will double check.
I actually don't need Magisk - my goal is to install Xposed. So in theory I could just try a different superuser. I'm just used to Magisk.
harryspar said:
I think so. I will double check.
I actually don't need Magisk - my goal is to install Xposed. So in theory I could just try a different superuser. I'm just used to Magisk.
Click to expand...
Click to collapse
I hope you get xposed working on Oreo - if you do get magisk functioning, maybe this xposed plugin could work? https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Else there's edxposed https://forum.xda-developers.com/xposed/list-xposed-modules-android-pie-ed-t3892768 though I have no idea if xposed functions on stock Oreo.