I'm completely at a loss at this point.
I attempted to root my Samsung S7 (AT&T) with Odin, and received an error. This is my first time ever rooting a phone, and I am generally oblivious to this kind of stuff. I disconnected the phone, and it began bootloop. I loaded it into download mode, and attempted to reset to stock. However, I have had endless issues trying to flash the stock firmware to my phone. At one point I unplugged the device once again, and I received the "use Emergency Restore" error screen. I tried to restore with Smart Switch, but I was not able to access my S/N (box is nowhere to be found, managed to find a S/N on Samsung's website since I registered it but Smart Switch wouldn't take it). So, I figured trying to restore with Odin was my last option. I have tried at least 3 different Odin versions, both modified and not, and not a single one of them has worked. I've received Complete(write) errors, Model Dispatch Fail errors, and Re-Partition errors. I've tried about 3 different firmware files as well, and while I think the one I have right now is most recent, none of them seem to be working. I thought maybe an issue I was encountering was that USB debugging or whatever it's called was disabled, but I have no way of telling because I cannot boot my phone.
I was fiddling around with all of this from 11pm to 6am last night, and picked it back up as soon as I woke up. I've been freaking out about this for hours.
I feel like I'm running in circles here. I don't understand what I'm doing wrong. I'm recovery bootlooped as well. The only thing I can boot is download mode.
I wasn't very cautious with this process, and I am completely unfamiliar with most lingo on these forums and the whole process in general. I really regret trying to do this. So -- is there anything else I can try to do to fix it? Or is my phone bricked for good??? I'm endlessly frustrated and have honestly felt like crying a few times over this. I shouldn't have messed with something I know nothing about. :crying:
I thank you for your patience in dealing with me as a beginner + appreciate any help you're able to give.
Cheers.
aerialslam said:
I'm completely at a loss at this point.
I attempted to root my Samsung S7 (AT&T) with Odin, and received an error. This is my first time ever rooting a phone, and I am generally oblivious to this kind of stuff. I disconnected the phone, and it began bootloop. I loaded it into download mode, and attempted to reset to stock. However, I have had endless issues trying to flash the stock firmware to my phone. At one point I unplugged the device once again, and I received the "use Emergency Restore" error screen. I tried to restore with Smart Switch, but I was not able to access my S/N (box is nowhere to be found, managed to find a S/N on Samsung's website since I registered it but Smart Switch wouldn't take it). So, I figured trying to restore with Odin was my last option. I have tried at least 3 different Odin versions, both modified and not, and not a single one of them has worked. I've received Complete(write) errors, Model Dispatch Fail errors, and Re-Partition errors. I've tried about 3 different firmware files as well, and while I think the one I have right now is most recent, none of them seem to be working. I thought maybe an issue I was encountering was that USB debugging or whatever it's called was disabled, but I have no way of telling because I cannot boot my phone.
I was fiddling around with all of this from 11pm to 6am last night, and picked it back up as soon as I woke up. I've been freaking out about this for hours.
I feel like I'm running in circles here. I don't understand what I'm doing wrong. I'm recovery bootlooped as well. The only thing I can boot is download mode.
I wasn't very cautious with this process, and I am completely unfamiliar with most lingo on these forums and the whole process in general. I really regret trying to do this. So -- is there anything else I can try to do to fix it? Or is my phone bricked for good??? I'm endlessly frustrated and have honestly felt like crying a few times over this. I shouldn't have messed with something I know nothing about. :crying:
I thank you for your patience in dealing with me as a beginner + appreciate any help you're able to give.
Cheers.
Click to expand...
Click to collapse
If you can at least get into download mode, then simply flash it with the latest STOCK firmware for your particular model.
That will bring it back to life, and you can attempt rooting it again, if you dare
aerialslam said:
I'm completely at a loss at this point.
I attempted to root my Samsung S7 (AT&T) with Odin, and received an error. This is my first time ever rooting a phone, and I am generally oblivious to this kind of stuff. I disconnected the phone, and it began bootloop. I loaded it into download mode, and attempted to reset to stock. However, I have had endless issues trying to flash the stock firmware to my phone. At one point I unplugged the device once again, and I received the "use Emergency Restore" error screen. I tried to restore with Smart Switch, but I was not able to access my S/N (box is nowhere to be found, managed to find a S/N on Samsung's website since I registered it but Smart Switch wouldn't take it). So, I figured trying to restore with Odin was my last option. I have tried at least 3 different Odin versions, both modified and not, and not a single one of them has worked. I've received Complete(write) errors, Model Dispatch Fail errors, and Re-Partition errors. I've tried about 3 different firmware files as well, and while I think the one I have right now is most recent, none of them seem to be working. I thought maybe an issue I was encountering was that USB debugging or whatever it's called was disabled, but I have no way of telling because I cannot boot my phone.
I was fiddling around with all of this from 11pm to 6am last night, and picked it back up as soon as I woke up. I've been freaking out about this for hours.
I feel like I'm running in circles here. I don't understand what I'm doing wrong. I'm recovery bootlooped as well. The only thing I can boot is download mode.
I wasn't very cautious with this process, and I am completely unfamiliar with most lingo on these forums and the whole process in general. I really regret trying to do this. So -- is there anything else I can try to do to fix it? Or is my phone bricked for good??? I'm endlessly frustrated and have honestly felt like crying a few times over this. I shouldn't have messed with something I know nothing about. :crying:
I thank you for your patience in dealing with me as a beginner + appreciate any help you're able to give.
Cheers.
Click to expand...
Click to collapse
Did you finally recover your phone? I'm in the same problem here since yesterday and feel your frustration right now. My phone is a Samsung S7 model SM-G930A from AT&T.
I found this thread https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 and I following the "Return to stock part", now downloading the firmware. Hope it helps.
I'm stucked in the blue screen "An error ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". Of course I try the Smart Switch but says that my model is not supported!
How can you recovered the download mode? I press the on/off button for some seconds and the screen turn of, but it turn on again with the freaking blue screen "An error ocurred while updating the device software. ...". I tried all the possible button combinations.
Thanks and good luck.
Stock firmware
Make sure when you go into download mode and flash that plugging the phone in is the LAST thing you do. I.e. plug phone in only after it is in download mode and only after you open Odin. Secondly, make sure you flash the STOCK firmware, as in Android Marshmallow v6.0.1 . Additonally, make sure that the re-partition option is NOT ticked, and also you might want to try turning off auto-reboot, and just hold the power button after unplugging once the status bar is all the way full and Odin says complete. Also, you need to make absolutely sure that you're getting the firmware for your exact device. I.e. SM-G930A stock firmware is NOT compatible with SM-G930F models. You could also try reinstalling the Samsung drivers. I just flashed to stock firmware then updated back to Nougat yesterday, mostly without a hitch by following these guidelines. There is a download page on rootmygalaxy with all the stock firmwares, that's what I used (I'd link but I just registered here). There is a very helpful guide on droidviews about how to update to Nougat 7.0 once you have finished flashing the stock firmware.
If I were you, I would just avoid rooting altogether. Rooting for me caused very bad performance and battery life, and it wasn't really worth the trouble. Sure, getting in-app-purchases for free was nice but I never tried flashing a custom ROM or anything because most of the stories I read involved soft bricks, bootloops, etc.
Hopefully not having USB Debugging and OEM unlock ticked doesn't brick your phone, I'm doubtful that it will. For the poster above me, make sure your phone is all the way off, the download mode button combo is vol. down+power+home all at the same time, and hold them. A screen should pop up saying press vol. up to continue. If you're still having problems, I regret to say that I am also relatively new to this and I am not all that knowledgeable.
I just made a post about my unrooting process, hopefully it helps!
https://www.youtube.com/watch?v=o6ryOQepX2Q Video shows booting into Download Mode. Or take it to a Best Buy that has a Samsung Sales section.
Related
Note 4 Stuck in Boot Loop - Help
I have a Note 4 SM-N910F, never been rooted, stock rom upgraded to 5.1.1 back in October, working fine until yesterday when it got stuck in a Boot loop.
Not sure what caused it but before it got stuck I was messing around with Google Photos which was running a bit slow.
Also I put it on the Qi Charger just before the loop started. It has an aftermarket Fone charger stuck to the battery. I’ve had this and the Qi Charger for 6mths with no problems before now.
It gets to the Samsung page waits a couple of seconds then boots again.
Here’s what I’ve tried - unsuccessfully - to fix the boot loop:
1: recovery mode.
I can get the little recovery text to appear in the top left but after a few seconds it boots again.
2: volume down, home
This gets me to the screen with up/down for continue/cancel.
This is the _only_ screen I can get to stay up without rebooting. It sits there waiting for input.
- Cancel, causes restart, of course, but back into the bootloop
3: Mashing on power button. Banging it, wiggling it, blowing on it.
I read somewhere this could cause a boot loop, but I doubt it is my case because
a. I’ve never had problems with the power button before
b: When I take out the battery and put it back in, it does NOT turn on. If I do the same holding the power button, it powers into the boot loop. So if the button were jammed on I would expect it to never remain off with the battery in.
3: flashing stock rom
I’m not 100% sure what build I had before. I know it was stock 5.1.1 OTA, and I’m pretty sure it was unlocked (my wife bought the phone and i inserted my old sim, but she may have bought it from my carrier and can’t remember)
So anyway I tried all three versions of TPH (unlocked) 5.1.1 from Sammobile.
Installed Odin 3.10.7 and flashed them.
It reboots to recovery but immediately boot loops again.
I doubt its to do with the version of the rom anyway since the symptoms are identical after flashing. Only now the boot loop always shows the little ‘recovery booting...’ text in the top left.
Here’s what I have NOT tried but am thinking about:
A: Re-partition option in Odin
B: Nand Erase All option in Odin
C: Buying a new battery.
On A/B: as far as I can tell what I have done so far should have left the data intact. I’m prepared to wipe all my data if it fixes my phone (no lectures about backups please!) and I’m tempted to do one of these on the off chance that the problem is caused by data or the “disk" problems.
But I don’t want to brick it. Can someone recommend how likely these are to help
And what they actually do?
(Please refrain from responses I see elsewhere like “this will brick your phone if you don’t know what you’re doing”. I don’t know what I’m doing, thats why I’m asking - just the facts please)
On C: the battery seems ok in that the power is solid even after not being plugged in for a long time, but since it was on the Qi Charger with that aftermarket thing stuck to it when it happened, I’m suspicious. Can any one say if this is a likely cause?
If so, it might be worth waiting till I get a new batter before doing A or B (can I wait days for Amazon!?)
[UPDATE] Got a new (genuine) battery at a local electronics store. No dice. Same problem, so it's not the battery. Shall I go ahead and re-partition.
[UPDATE] Got a PIT file from another forum, and flashed again with re-partition checked and PIT loaded. same results.
Is Nand-rease worth trying?
The phone is still under warranty so maybe I can return it.
But in that case I want to erase what's on it first.
thanks for any help
rhubarb
I don't think that the Samsung service center will accept cuz u have unofficiall custom
Simple Go to ur any nearby SOFTWARE ENGINEER may be he will help u out
Even I had the same problem with my NOTE 4 EDGE
Try downloading and flashing any "COJ5" build of 5.1.1 from sammobile. Samsung has recently issued a new update "COJ5" it basically locks down the bootloader and will not allow the device to run any previous builds.....Maybe your phone updated to COJ5 in the background and then it started messing around because the phone is rooted. Flashing "COJ5" will lock your bootloader and you will not be able to flash 4.4.4 or 5.0.2 but there is nothing to lose when your phone is already pretty much dead?.....ORRR if this is not a software issue then it could be related to hardware maybe the memory of your phone is done. I am not an expert on this but this is just an advice.....i have told you what will happen if u flash coj5 build now its up to you to decide. I would suggest you wait and wait if you are lucky to get a response from an expert and do what they say .......if not then give this a try!
**EDIT** another idea....First flash a custom recovery such as TWRP....see if it lets you boot into recovery and if it does then perform all sorts of formats.....and factory resets in there see if it works....if its still rebooting after format then flash the coj5 build of 5.1.1....note that you "MUST" format it with TWRP first and then check if its working because once you have coj5...it might not let you flash custom recoveries.
dork997 said:
Try downloading and flashing any "COJ5" build of 5.1.1 from sammobile. Samsung has recently issued a new update "COJ5" it basically locks down the bootloader and will not allow the device to run any previous builds.....Maybe your phone updated to COJ5 in the background and then it started messing around because the phone is rooted. Flashing "COJ5" will lock your bootloader and you will not be able to flash 4.4.4 or 5.0.2 but there is nothing to lose when your phone is already pretty much dead?.....ORRR if this is not a software issue then it could be related to hardware maybe the memory of your phone is done. I am not an expert on this but this is just an advice.....i have told you what will happen if u flash coj5 build now its up to you to decide. I would suggest you wait and wait if you are lucky to get a response from an expert and do what they say .......if not then give this a try!
**EDIT** another idea....First flash a custom recovery such as TWRP....see if it lets you boot into recovery and if it does then perform all sorts of formats.....and factory resets in there see if it works....if its still rebooting after format then flash the coj5 build of 5.1.1....note that you "MUST" format it with TWRP first and then check if its working because once you have coj5...it might not let you flash custom recoveries.
Click to expand...
Click to collapse
You can flash TWRP through ODIN while on COJ5 bootloader. It's locked but you still can flash recoveries and kernel and 5.1.1 ROMS
I am very interested in this thread. I have the EXACT same problem as you have after installing SimplRom, which was a ROM prior to COJ5. It could indeed be that our bootloaders are locked now?
I am using the N910F and just like you, installing any ROM/Custom Recovery/Bootloader/Kernel doesn't help. Perhaps installing a COJ5 ROM might help. I will give that a try, but I've recently used Kies to install the latest official firmware, but it didn't fix the issue.
I will report back here and we'll work on this together to make our phones work again!
Osama lakdawala said:
I don't think that the Samsung service center will accept cuz u have unofficiall custom
Simple Go to ur any nearby SOFTWARE ENGINEER may be he will help u out
Even I had the same problem with my NOTE 4 EDGE
Click to expand...
Click to collapse
Thanks but:
1: I have no custom rom. I have never had a custom rom on this device. I want to take it to Samsung, but want to clear the memory first. How can I do that?
2: I _am_ a software engineer_
dork997 said:
Try downloading and flashing any "COJ5" build of 5.1.1 from sammobile. Samsung has recently issued a new update "COJ5" it basically locks down the bootloader and will not allow the device to run any previous builds.....Maybe your phone updated to COJ5 in the background and then it started messing around because the phone is rooted. Flashing "COJ5" will lock your bootloader and you will not be able to flash 4.4.4 or 5.0.2 but there is nothing to lose when your phone is already pretty much dead?.....ORRR if this is not a software issue then it could be related to hardware maybe the memory of your phone is done. I am not an expert on this but this is just an advice.....i have told you what will happen if u flash coj5 build now its up to you to decide. I would suggest you wait and wait if you are lucky to get a response from an expert and do what they say .......if not then give this a try!
**EDIT** another idea....First flash a custom recovery such as TWRP....see if it lets you boot into recovery and if it does then perform all sorts of formats.....and factory resets in there see if it works....if its still rebooting after format then flash the coj5 build of 5.1.1....note that you "MUST" format it with TWRP first and then check if its working because once you have coj5...it might not let you flash custom recoveries.
Click to expand...
Click to collapse
Thanks to you and dork97 for the ideas. First some notes:
- I have never flashed a custom ROM, nor ROOTed this Note 4. The recent upgrade to 5.1.1 was official.
the first upgrade to 5.0.1 was automatic and after that I turned off automatic upgrades and upgraded to 5.1.1. manually. So I dont think it was an upgrade that caused it and it certainly was NOT a custom ROM or ROOT. I was doing nothing at all when the boot loop started.
- I'm not sure what ROM I had, but when I went looking for the available Portugal unlocked ROM, which _should_ be what I had, the latest were CJ03 (3, not 5) and before that CH03, CI03. Presumably I had one of those (my last update was October, so probably CH03).
I have tried all 3 of these, but the symptoms are the same.
I'm tempted to try the TWRP option - but would like some more details on what is and what it does, or what problem I might have that it would fix.
However I am probably still in time for a warranty repair - especially since I didnt actually do anything for this to happen. I would like to avoid losing that chance.
If I do take it in for warranty, I'd like to wipe the memory first though. How can I do that?
Finally can anyone actually tell me if the NAND ERASE is likely to help? How does flashing TWRP compare?
I get the feeling in fact, that I have a hardware problem. Especially given there were not software system changes around the time it happened, and given that it loops while trying to boot into recovery mode. In fact the only mode that doesnt constantly cycle is download mode. (Even holding the power button in dl mode does nothing which makes me suspect that, but pulling the battery out and replacing it leaves it off until I press the power button so perhaps not)
Thanks for the replies so far. Any more ideas, details?
roverrhubarb said:
I get the feeling in fact, that I have a hardware problem. Especially given there were not software system changes around the time it happened, and given that it loops while trying to boot into recovery mode. In fact the only mode that doesnt constantly cycle is download mode. (Even holding the power button in dl mode does nothing which makes me suspect that, but pulling the battery out and replacing it leaves it off until I press the power button so perhaps not)
Click to expand...
Click to collapse
I have the exact same as you. I did install a custom recovery (multiple) and still get the bootloop. From my tries yesterday, I indeed also suspect it may be a hardware issue. Perhaps to do with the battery/charging port. When I have my device unplugged and try to start in recovery/normalboot, it does not have a bootloop but simply turns off (and then doesn't respond until I pull the battery out). I think a NAND erase wouldn't do anything as I've personally tried that already.
Have you prior (upto a week) before you got the issues had your phone in a moist environment (bathroom while showering for example). I got my problems a week after I accidentally left my phone in the bathroom and installed custom ROM (which was done earlier and had no issues).
I've read online that it may have caused oxidation on the inside and may need some cleaning/drying with alcohol.
I still hold hope that we just have a software issue as download mode is working fine (apart from the Power off not working unless we pull out the battery).
Anybody have any experience with oxidation on their phone? Perhaps have had a similar bootloop due to hardware failure?
roverrhubarb said:
Thanks to you and dork97 for the ideas. First some notes:
- I have never flashed a custom ROM, nor ROOTed this Note 4. The recent upgrade to 5.1.1 was official.
the first upgrade to 5.0.1 was automatic and after that I turned off automatic upgrades and upgraded to 5.1.1. manually. So I dont think it was an upgrade that caused it and it certainly was NOT a custom ROM or ROOT. I was doing nothing at all when the boot loop started.
- I'm not sure what ROM I had, but when I went looking for the available Portugal unlocked ROM, which _should_ be what I had, the latest were CJ03 (3, not 5) and before that CH03, CI03. Presumably I had one of those (my last update was October, so probably CH03).
I have tried all 3 of these, but the symptoms are the same.
I'm tempted to try the TWRP option - but would like some more details on what is and what it does, or what problem I might have that it would fix.
However I am probably still in time for a warranty repair - especially since I didnt actually do anything for this to happen. I would like to avoid losing that chance.
If I do take it in for warranty, I'd like to wipe the memory first though. How can I do that?
Finally can anyone actually tell me if the NAND ERASE is likely to help? How does flashing TWRP compare?
I get the feeling in fact, that I have a hardware problem. Especially given there were not software system changes around the time it happened, and given that it loops while trying to boot into recovery mode. In fact the only mode that doesnt constantly cycle is download mode. (Even holding the power button in dl mode does nothing which makes me suspect that, but pulling the battery out and replacing it leaves it off until I press the power button so perhaps not)
Thanks for the replies so far. Any more ideas, details?
Click to expand...
Click to collapse
Well if you still have warranty then don't try anything on your own and go for the warranty repairs.
dork997 said:
Well if you still have warranty then don't try anything on your own and go for the warranty repairs.
Click to expand...
Click to collapse
thanks. How can I wipe personal data without voiding the warranty, using odin or kies? Given I canNOT get it into recovery mode, only download mode.
roverrhubarb said:
thanks. How can I wipe personal data without voiding the warranty, using odin or kies? Given I canNOT get it into recovery mode, only download mode.
Click to expand...
Click to collapse
Since you can get into download mode I'd flash firmware through ODIN again after verifying it's correct.
I'm seeing off the sammobile site for the 910F not all are the COJ5 locked bootloader.
Since you did update in Oct you may be on the COJ3. I'd try one of those and see if it works.
If it doesn't work and stops on the sboot.bin file then you have the COJ5
roverrhubarb said:
thanks. How can I wipe personal data without voiding the warranty, using odin or kies? Given I canNOT get it into recovery mode, only download mode.
Click to expand...
Click to collapse
i am sorry i don't know any way to remove personal data other than doing it via recovery. There is an option of "nand erase" in odin it is used while flashing firmware and it wipes everything on the phone but i have never used it (and also don't know whether it can help you or not) ... Senior members kindly help us with this.
Any update to your situation?
very interested as I am in the same situation as you are. Download mode works, recovery+normal boot not. No matter what ROMs/recoveries I install
Same issue I think
I am also in the same situation, although I can enter the recovery mode - home power and volume up - I have tried the wipe cache and then factory wipe to no avail - I have also entered download mode and flashed the stock recovery and even though Odin says pass, it is still in a boot loop. Also when I go to the download screen it has a line saying knox warranty void 0x1(4) does this mean I have voided the warranty even though I only used Odin to flash stock recovery?
Did anyone found a solution
Did anyone ever found a solution to this problem I'm having the exact same issue on a note 4 smn910a
I have a slightly different issue with my Note 4 SM-N910G, wherein am not able to start the phone at all, it is completely dead, if i put the cell phone on charge then also there is no LED on the top but if i connect the device to the PC it does make the connected sound on the PC but Odin is still not able to recognize the device neither kies. I tried draining the power by removing the battery, connected the device to PC without battery and then inserting it but the same problem. Please suggest me any resolution for this dead body am carrying from past few weeks.
hi Op,
did you find any solution for this issue?
Hello all. This is advice to use as a very last resort if you are experiencing the recovery bootloop issue AND you don't have the emmc failure bug. I had the recovery reboot, sudden shutdown with no warning, etc. issue for the past two weeks. I tried everything on Google and Youtube to fix my problem with no success. I flashed multiple stock ROMS and recovery tars (stock and TWRP) via ODIN, but nothing worked. Oddly enough, I never received the emmc error that I have read about. Also, in the few times that my phone booted normally, I even loaded the Wakelock Power Manager app, set it to partial wakelock and my phone STILL continued to bootloop. As a last resort, I bought a new battery, but the reboot problems continued in Android 4.4.4 Kitkat, 6.0 Marshmallow, 7.1 Nougat and 8.1 Oreo ROMS. Well, here is what finally helped me to get my phone back operational. I had a backup ROM from a previous install and a TWRP flashable version of the same ROM on my SD card (in case the phone did not stay on for the full restore). I put the phone into a ziplock bag into a freezer for about 20 min. (thankfully this time TWRP stayed on long enough for me to do the following):
1) copy all the files I wanted to save from internal storage to a computer.
2) performed a full wipe (Dalvic, Cache, System, etc. Like when flashing a ROM, but this time also internal storage. Note: Please do not wipe both internal and SD card, as you may have a difficult time trying to load the ROM file back on the sd card (assuming you don't have a card reader).
3) After wiping, I was able to restore my stock ROM backup (or you can just flash the stock ROM).
I can't be 100% sure, but I think my wiping internal and then flashing the stock ROM finally did the trick. Since this morning, the phone has been pretty much back to as it was before. In either case, I'm sharing this with the hope that it helps someone else.
Sent from my SM-N910T using Tapatalk
Hey all,
I'm trying to get my brother's Verizon S6 Edge+ out of a bootloop due to the lastest OTA gone bad.
My thinking is if I could find that OTA somewhere online, I could ODIN it in, and maybe clear it the problem. I don't know if that'll work, but I can't test my theory because I can't find the OTA for download anywhere.
Smart Switch doesn't work because even though I can get into Download Mode and run Smart Switch's Emergency Recovery all I want, I enter the model number SM-G928V and it asks for the S/N next. No matter what I try, nothing works. I've gone through the logs, pulled serial number from the build.prop. I've tried everything on the original packaging. I've tried the IMEI and all the barcodes right before entering Download Mode - just no S/N registers.
I can reflash the old firmware, PJ3, on there via ODIN, and each time I reflash it tries to install the OTA again. It runs through the update up to 32% and then I get a droid guy on his back with a yellow triangle - every. single. time.
I don't understand where the heck this OTA is stored and how the hell I can zero it out or remove it. I've tried popping in a new PIT, repartitioning, etc. Hell, I've tried a NAND RE-WRITE (against everyone's cries this is a terrible idea).
Does anyone have the very latest G928VVRS3BPL3 that was pushed Dec 29, 2016 to VZW S6 Edge+ devices? I'm even willing to PayPal for a good copy that will ODIN into the VZW S6 Edge+...
Alternatively, if you don't have a copy of PL3, do you know of anyway I could ADB my way into wiping the corrupt PL3 patch away? I can't seem to ADB right now, but maybe you know a trick I don't? I'm thinking I could perhaps zero out the instructions that initiate the patch at launch or something? If I can simply boot up - fantastic, but I'm in this infinite boot loop of installing PL3 to 24% and going belly-up.
I'm almost embarrassed to say I PAID for a copy of PJ3... but I can't find this latest Dec 1st security update patch anywhere on the web.
The phone is out of warranty. Contrary to Verizon store morons (sorry!), my brother didn't try to root the phone. He doesn't know how to do any of that stuff. The OTA is corrupt - plain and simple. Knox isn't even tripped. They accused him of trying to root the thing - heh.
Since the phone is out of warranty, no one will fix it for him. I'm his only hope, and I'm not much of a hope right now.
You're MY only hope.
This is a great phone, too. I feel bad for the guy. He woke up to his phone dead one morning. That's it.
Folks I initially tried to root my phone *SM-G935F* using Odin and a CF hero2lte file. The flashing was all good to go with a green pass. Then upon rebooting the phone got stuck on the Samsung logo boot screen with red words at the top that said **Recovery Is Not Seandroid Enforcing**. This being the case all I was able to get into was (Download Mode). I tried to do the samething a few times and gave up after no successful attempts and the phone not being able to successfully reboot.
Fast forward to present I downloaded the phone's firmware which was a zip that contained 4 files (5 total actually because there was another CS file in the event that you wanted to preserve your data etc.). I loaded all of the files in Odin and made an attempt to flash the phone again however it got stuck on *System* and never go to Green *Pass*. So I figured I would try it a couple of more times in case Odin or something just got hung up on the first try. Any how that wasn't the case.
Now with the above being said what did change is when I would try to reboot into *Download Mode* again it said something along the lines of Emergency Smart Switch Recover. I downloaded Smart Switch onto my computer and went through the specific steps to try to Recover the phone using Smart Switch. Now after it was all done I got to the blue screen with the Android and it said *Erasing...* then the phone booted up and its now stuck at the Samsung animation screen. This being said as of current I can now access *Download Mode* and also boot into the black screen or *Recovery Mode* I think its called where I can reboot the phone through a bootloader, power off, factory data wipe / reset, etc etc.
The above being said I have tried the factory reset / wipe. The reboot in bootloader, reboot phone, all with no success.
Also would like to add that before doing all of the above I forgot to tick *USB Debugging* in Developers Mode when the phone was in its normal state. I must also mention that all of this was a first for me and I looked at doing so to try and recover lost data on my phone. Also wanna add that I am not too familiar with ADB or twrp or how to mess with any of that stuff given the limited access I have to my device because it can no longer bootup like it normally would.
I'm currently at a lost of words as to what I can do next as I am out of ideas and could really use some help. I would also be more than happy to donate a little to anyone who is able to help me boot my phone back up and get things back to normal.
Any and all help would be greatly appreciated.
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
Bro would you tell pls , what you did to restore. Thanks
shah22 said:
Bro would you tell pls , what you did to restore. Thanks
Click to expand...
Click to collapse
After me not being successful with the root or with flashing the stock OEM firmware using Odin the phone would get hung up in download mode and the only difference when it would go into download mode it would say to use SmartSwitch Emergency Recover which is what was used and that fixed the issue and the phone rebooted completely fine.
However the above being said I honestly still feel the phone has some small minor issues that I did try to resolve all with no luck. First off when loading to my home screen the icons, and clock, etc etc take about 2 or 3 seconds longer for them to appear on screen than it used like when the phone was new out of the box.
Other thing to note is for some odd reason this issue was thought to be worked out by just booting into recovery mode and doing a factory reset from there, wiping the cache, etc etc. Well this also didn't solve the issue and for some odd reason when performing this the phone didn't reboot on its own.
Basically how it should be normally is after you select that you want to do a factory reset, wipe cache, etc etc, the phone should normally reboot and go through the entire process by itself, however this was not the case. The phone instead went back to the recovery screen and I had to select reboot rather than it normally rebooting on its own.
I've honestly given up on things and given that it is in working order with just a few small minor hiccups I've decided to give the phone to a family member which they plan to use as trade-in credit towards a new Galaxy Note 8.
That being said I will always have a soft spot for the S7 Edge being it was my first smartphone after I had bought a Sony Xperia Z during the same year but returned it the day after because what was to me being poor quality of the Sony phone.
Hmm, looks strange bro , your phone didnt worked after flashing stock rom with odin , and this is the last resort , but you said it was normal before you tried to root , so i guess it was still a software issue other than some hardware problem due to software , but anyways wish you good luck in future , another thing is that my s7 edge has also a very poor build quality , has front camera issues , paint peeling around usb port , wifi issue and high battery degradation , but that happens i guess with today's phones
The version of Odin I used was v3.10.6. I had tried the most current version and a few others, and from the get go for whatever reason this was the only version that would actually pickup the phone being added. Well wait hold on a second the other version would say added when the phone was in but when hitting start nothing would happen, even after waiting an extensive amount of time, also note that the com was highlighted that blue ish color indicating the phone was being recognized by Odin but once again for some odd reason it was only version v3.10.6 that carried out the process of my root attempt and also the attempt I made flashing the original firmware on it.
As for quality the phone had no paint chip or peeling, neither the silver aluminum frame around it either. The build quality was beautiful and up to par with mine. I had a soft spot for my S7 Edge also because it was in the white color which at the time of purchasing was a bit more scarce than the other colors. I purchased the phone from an Amazon.com seller, and during that time I also purchased 2 others from other Amazon sellers but returned those because they had carrier animations for them that were Band LTE or Brand LTE, whatever its called.
This one had no carrier animation upon boot and turned out to be a UK Nougat model. Haven't really seen or came across another one since that would be from a trusted seller or source. Nowadays you never know what you're getting both on eBay and Amazon from these third party sellers.
Yeah thats really strange with odin , its good that you dont have quality issues which struck heavily on me , but yes everyone should be quite careful when ordering online and only should do with trusted resellers
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
vini3237 said:
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
Click to expand...
Click to collapse
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Hydranize said:
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Click to expand...
Click to collapse
Phone is SM-G935FD
I do not know what caused it, I already got the celuar so, in status it says Custom.
I already tried to blink for odin 3 different Stocks and the same thing continues.
When I got it it could not access the recovery mode, only the download mode was accessible, after flashing the Brazilian Stock 6.0.1 I was able to access recovery mode.
The phone turns on, and hangs at boot, Samsung logo, restarts and stays in infinite looping.
Can it be Hardware?
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Hydranize said:
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Click to expand...
Click to collapse
Ok now i think what was the problem , you didnt enabled usb debugging , and for flashing with odin its a must ! , for guys who want to flash firmware using odin .. please enable usb debugging in developer options or you will have much issues and may also brick your phone , so if you dont want to enable usb debugging or developer options , just use samsung smart switch on pc to flash your firmware.
Yeah that was my issue was I had OEM Unlock checked off and one other thing in Developer Options and forgot to enable USB Debugging leaving me stuck in the process when the phone couldn't reboot normally after the flash attempts. But yeah SmartSwitch Emergency Recovery should definitely be able to fix and resolve the issue if the phone can't reboot normally.
Yeah, like an idiot I rooted this and started deleting bloatware just to find that upon restart, the Samsung logo would flash for three seconds, and poof. That’s it. Brick. I can still get into download mode and recovery mode, but in recovery mode, no matter what I do, at the bottom it says E: failed to find /misc partition. TWRP is gone as well.
So, am I proper screwed here? Tried connecting to Kies to no avail. I don’t even know how I’d use Odin to fix this. Can’t find the proper firmware.
For reference, I have a dual-sim SM-J530F/DS.
I know I’m an idiot. I could just really, really use someone’s help here. I had rooted so many phones successfully back in the States, and now I screwed up, big time.
Download the firmware of your phone from sammobile or other and flash it from Odin. You must be in download mode. If you want to remove bloatware, try to flash a bloatware script which is already tested and it's working.
Help
undertakerlives said:
Yeah, like an idiot I rooted this and started deleting bloatware just to find that upon restart, the Samsung logo would flash for three seconds, and poof. That’s it. Brick. I can still get into download mode and recovery mode, but in recovery mode, no matter what I do, at the bottom it says E: failed to find /misc partition. TWRP is gone as well.
So, am I proper screwed here? Tried connecting to Kies to no avail. I don’t even know how I’d use Odin to fix this. Can’t find the proper firmware.
For reference, I have a dual-sim SM-J530F/DS.
I know I’m an idiot. I could just really, really use someone’s help here. I had rooted so many phones successfully back in the States, and now I screwed up, big time.
Click to expand...
Click to collapse
Hey have you fixed this issue? I have same problem. OEM Locked .Please help!!
Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.
Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:
spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?
Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)
The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol
Well at least you got it working and not using as a door stop
that was really sad story man.....
spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha