Related
Alright i have been keeping an eye out on a few things and came across BootManager which is a newer app that allows you to easily flash between several roms! Which of course is awesome if you want to try new ones out without reflashing as often. Unfortunately im am not quite as wise in the Android scene yet as i like, new to it with my Acer Iconia as i am, BUT i have been corresponding with the developers for BootManager and they have given me a link so we can submit the Acer Iconia to be added to the devices that can use Bootmanager!
I just don't know how to give them the variables they need!
Could someone that does know how to get the variables needed, (through adb shell or whatever) kindly submit it to them? Here is the link they gave me for submitting new devices, if you do do this, please post it here, so they don't get a bunch of repeat submissions on it, also, so i can keep an eye on the app and get it when they update it accordingly! Thanks very much!
Edit: I can't post links yet, cause i have not posted often enough. Please send me a message and i can give you the link that way! Or just close the space below and use it.
init2winitapps. com/submit_device.html
I'll do it in the morning.
Make damn sure they know they have to run "itsmagic" before/after ANY flash operation (I can never remember which, that's CWM's job!)
I did it too and i sent also a mail to the developers about itsmagic script!
good luck
If you read the information about this program.how it works and the phones that it supports will tell you it will most likely work on our device.THEY SAY WORKS ON PHONES ONLY.and only those WITHOUT LOCKED OR SECURE BOOTLOADERS
But you never know. They might put the efforts to write a new bootloader for this device.the program works by moving the bootloader.well no fifteenth then any other boot manager.
if im wrong and they make it works. I would buy it first.
Goddess erica.
This was posted a while ago and it doesn't appear that the a500 has been added to the supported device list. Has anyone been successful in getting this to work? I want to try it but I'm not sure what issues I might run into if it doesn't work. I need to make sure a Nandroid restore can fix whatever issues might be caused before to try it.
IF i remember right it says on there site this can ONLY WORK WITH UNLOCKED and not encrypted BOOT LOADER DEVICES. I TO Talked to the dev way way long ago..as for this to work they change the boot target in the boot loader to look at there software . then it will boot from there..
kinda like grub to a normal pc.. with the bios being the primary boot . If this makes any sense..
so i think it cant happen.. in the linux thread in our dev area .. someone in the first few pages it talkes about this very app and the flashing the bootloader out.. Dont think they ever figurerd a way around the security..
sorry simple answer is ABSOLUTELY NO WILL NOT WORK
THANKS ACER
I'm confused. My a500 doesn't have a locked boot loader. Thats the reason I got it. I have Thor's recovery loaded on it and I have been able to flash Roms without issue. To boot into recovery I just hold down the volume button and boot the device. I can load custom kernels or pretty much anything else I want. Am I misunderstanding what an unlocked bootloader is?
I had a Razr previously which had a locked bootloader and the only way to flash was to use a bootstrap because it had a locked bootloader. I had loads of problems with it which is why I swapped it out for the Galaxy Nexus when it came out. Both my a500 and Gnex are flashing like champs.
Where there later version of the a500 that had a locked boot loader? I don't think mine does.
trevoryour said:
I'm confused. My a500 doesn't have a locked boot loader. Thats the reason I got it. I have Thor's recovery loaded on it and I have been able to flash Roms without issue. To boot into recovery I just hold down the volume button and boot the device. I can load custom kernels or pretty much anything else I want. Am I misunderstanding what an unlocked bootloader is?
I had a Razr previously which had a locked bootloader and the only way to flash was to use a bootstrap because it had a locked bootloader. I had loads of problems with it which is why I swapped it out for the Galaxy Nexus when it came out. Both my a500 and Gnex are flashing like champs.
Where there later version of the a500 that had a locked boot loader? I don't think mine does.
Click to expand...
Click to collapse
Not locked, but encrypted, we use a magic script called itsmagic to bypass the encryption.
daveid said:
Not locked, but encrypted, we use a magic script called itsmagic to bypass the encryption.
Click to expand...
Click to collapse
Ah. I always wondered what itsmagic did. I get it now. Damn. Is there currently any tablets out there that do not have encrypted or locked boot loaders?
Not any good ones.. welcome to the new communist Tech generation...
they want our devices to be disposable.
Hi all,
I'm new to rooting and modifying my Verizon S5 - so I don't have the most technical knowledge of Android nor do I have a deep understanding of related jargon yet. Recently I was able to root my phone using jrkruse's method (http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370). I then wanted to flash a new ROM - Resurrection Remix MM in particular. Through some research this seemed the best to my needs.
I understood that to do so I needed to first unlock my bootlader. So to do so I followed GeTex's post at http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909. I followed Method 1. All was well until the step of installiong Bootloader_Unlock_Safestrap.apk to my phone. After doing that and installing safestrap again like the guide said, I went to reboot my phone into recovery mode, however, initially there was only a black screen. Then, a message told me that Safestrap was disabled and gave me the options of recovery or allowing to continue. Here is a photograph of the screen (found online, not my own imagehttp://img.wonderhowto.com/img/99/57/63530107864095/0/install-custom-recovery-new-rom-your-bootloader-locked-samsung-galaxy-s4.w1456.jpg) Tapping "recovery" brought me to Safestrap and tapping "continue" made the screen black again - no Samsung or Verizon load screen followed.
Thinking that maybe this was normal, and that I had to flash one of the safestrap bootloader unlocks, I flashed SafeStrap_PD1_Bootloader_Unlock_AIO.zip as the phone was in safestrap. After that, any way of starting up my phone showed me a small message in red at the top of my screen saying my kernel was bad or broken (sorry I don't know the message verbatim - I should, but it was a while ago and I was in a hurry to have a functioning phone ASAP for work and was immediately concerned with unbricking my phone rather) a warning sign (big triangle with a !) telling me to use VZW software repair.
If anyone can pick out specifically where I went wrong, that would be great. However, as I'm a noob and there's a lot of room for error, that may be easier said than done.
It would also be helpful if someone could tell me (or link me guides) how to set up Resurrection Remix (or any other great ROM you would recommend) on an S5 G-9000V.
Also, any general advice for a noobie looking to optimize his Android would be greatly appreciated.
Thanks! Love this community for how quickly and how well they help out people with troubles like this
Bumping this, looking for help.
Would love some tips, even if they're simple general direction on how to set up this rom.
Thanks all!
jd13 said:
Bumping this, looking for help.
Would love some tips, even if they're simple general direction on how to set up this rom.
Thanks all!
Click to expand...
Click to collapse
After you have unlocked your bootloader, you should just flash the new recovery (I use TWRP) using Odin software. Once TWRP recovery is installed, boot to TWRP recovery and flash RR RoM. Just follow the RR RoM thread and choose Verizon variance.
I don't use safestrap anymore once I were able to unlock my bootloader. Just make sure that your bootloader IS IN FACT UNLOCK, before you can flasH TWRP.
johnnybg00d said:
After you have unlocked your bootloader, you should just flash the new recovery (I use TWRP) using Odin software. Once TWRP recovery is installed, boot to TWRP recovery and flash RR RoM. Just follow the RR RoM thread and choose Verizon variance.
I don't use safestrap anymore once I were able to unlock my bootloader. Just make sure that your bootloader IS IN FACT UNLOCK, before you can flasH TWRP.
Click to expand...
Click to collapse
Thanks a lot for your help, but I just did some more research and found out that my eMMC was in fact Toshiba, while I had originally thought it was Samsung. Oh well! Guess I'll stick to TW based ROMs on my firmware. I was thinking of going with MOAR Lollipop.
I have a xperia c4 e5303, is a awesome device and 5-6 days ago i wanted to use xposed firmware to enable a fake gyroscope.
AND THE HELL STARTED.
I had the device rooted with custom recovery twrp when i was in lollipop 5.1, i installed the firmware for xposed and the phone was stucked in "android optimization", for hours. I restarded it sometimes but nothing, so i formatted my device and when i rebooted it, i was stucked in "sony" logo screen, some minutes ago i founded that my phone was totally empty.
c: *internal screaming*
I waited the next day, i downloaded the ftf of original marshmallow 6.0 firmware for sony xperia c4 and i installed it on my device, then everything worked perfectly luckely.
Easy peasy lemon squeezy, or not?
Some hours after i founded that i couldn't use the recovery mode!
I searched and searched and i founded that the problem could be the bootloader,so i used a sony official guide to unlock that.
I couldn't finished that guide becouse with any connection, on any computer, android sdk can't install his components(such as google usb driver, that are required for that method), and the program just install everytime the same package in loop. I tried aaaallll the method in the universe for that, i tried also to install once per once the zip files of the downloaded package but it was totally useless.
So i founded another method after some days of searching (with flashtool) and now my bootloader is fully unlocked, if i use flashtool to unlock the bootloader, it says that is unlocked and ask me if i want to relock it so i think now the bootloader unlock is done. FINALLY.
Then, i turned off the phone and started it by pressing the volume down+power botton, and all the device did was reboot himself repitetly until i release hard keys and when i do it the phone start automatically.
I think my device now reboot himself instead of going in recovery mode.
What can i do i am totally frustrated about this and i really don't want to buy a new device becouse i don't have a gyroscope. I love my xperia c4, i just don't know why i can't get the recovery mode back to install twrp, for rooting the device, for retry to get xposed virtual sensor and then finally enjoy my vr experience...
In the end, i have a Xperia C4 5303 with original Marshmallow 6.0 firmware installed, that can't go in recovery mode in any ways.
Pls someone help me..
no one?..
No one here know hot to save my smartphone?
update: now i can use fasboot and adb commands becouse i installed the drivers properly.
but i still can't flash a custom recovery to get the root..
asnachan said:
update: now i can use fasboot and adb commands becouse i installed the drivers properly.
but i still can't flash a custom recovery to get the root..
Click to expand...
Click to collapse
Digging through XDA (next time use the website's search bar, tee hee hee) I found this thread:
https://forum.xda-developers.com/xp.../bootloader-unlocked-custom-recovery-t3285521
Edit: I know it says C5 Ultra whatever but the thread says it also works with your model (C4 E5303 no?)
Before trying anything, I'd seriously recommend reading all eleven pages so you don't miss anything and end killing your phone (or back at square 1).
I'm not an expert on Android or anything (I personally have only owned 1 device — a first gen Moto G), but the method presented in the thread is very odd. Are all Xperia phones this weird?
Read carefully — some steps might be unnecessary (after all, you already unlocked your bootloader [maybe?])
P.S. you lost the recovery because by installing the original firmware it basically got erased (original firmware didn't have TWRP after all!)
P.S.S. you should create a backup once you get TWRP up and running, just in case.
I can't help you more than this because I do not own the device, so I cannot share ~personal wisdom~ with you (beyond recommending the Moto G series).
Good luck!
( And search the forums and threads before posting — that's an XDA rule! )
Sent from my Motorola Moto G using XDA Labs
thx
Bludwurst said:
Digging through XDA (next time use the website's search bar, tee hee hee) I found this thread:
https://forum.xda-developers.com/xp.../bootloader-unlocked-custom-recovery-t3285521
Edit: I know it says C5 Ultra whatever but the thread says it also works with your model (C4 E5303 no?)
Before trying anything, I'd seriously recommend reading all eleven pages so you don't miss anything and end killing your phone (or back at square 1).
I'm not an expert on Android or anything (I personally have only owned 1 device — a first gen Moto G), but the method presented in the thread is very odd. Are all Xperia phones this weird?
Read carefully — some steps might be unnecessary (after all, you already unlocked your bootloader [maybe?])
P.S. you lost the recovery because by installing the original firmware it basically got erased (original firmware didn't have TWRP after all!)
P.S.S. you should create a backup once you get TWRP up and running, just in case.
I can't help you more than this because I do not own the device, so I cannot share ~personal wisdom~ with you (beyond recommending the Moto G series).
Good luck!
( And search the forums and threads before posting — that's an XDA rule! )
Sent from my Motorola Moto G using XDA Labs
Click to expand...
Click to collapse
Thanks a lot for your time, but i am using that thread to root this, and i am stucked at the last point becouse i don't know what he means with:
"THIS IS IMPORTANT
The rom has
Code:
recovery.from.boot.p"
I did all the steps except for that, and i get no errors but when i try to boot in recovery the phone just stay on the logo and then after some minutes reboot himself and starts normally.
i already ask what the last point is in that thread
p.s.: i know i will not have twrp if i reinstall stock fw, but the point is that i don't have also the normal recovery, i can't access to that via adb or via hard keys..
asnachan said:
Thanks a lot for your time, but i am using that thread to root this, and i am stucked at the last point becouse i don't know what he means with:
"THIS IS IMPORTANT
The rom has
Code:
recovery.from.boot.p"
I did all the steps except for that, and i get no errors but when i try to boot in recovery the phone just stay on the logo and then after some minutes reboot himself and starts normally.
i already ask what the last point is in that thread
p.s.: i know i will not have twrp if i reinstall stock fw, but the point is that i don't have also the normal recovery, i can't access to that via adb or via hard keys..
Click to expand...
Click to collapse
Ah. You should've mentioned it (i.e. linked to the guide). Sorry sorry!
Read further down. The "recovery.from.boot.p" is this thing that overwrites TWRP with the stock recovery. Following the «THIS IS IMPORTANT» indication are instructions to get rid of the thing, and so being able to keep TWRP permanently.
You need that last step to succeed.
Sent from my Motorola Moto G using XDA Labs
in the other thread they said to me to roll back to 5.1 i am doing it now
nvm i got hard brick, the phone is dead and i can't enter in download mode....
asnachan said:
nvm i got hard brick, the phone is dead and i can't enter in download mode....
Click to expand...
Click to collapse
I'm very sorry to hear that ?
Sent from my Motorola Moto G using XDA Labs
Is fine, i had to buy another phone that is why is tarted to root the xperia.
just..i'm out from the world of rooting i think. i broke 2 devices 1 by flashing a original rom with sony original flashtool and 1 by installing a root with kigroot, and now on that i can't read the sim.
i wait until the world of rooting will be more stable and with more official custom roms...
RIP
Dear and knowledgeable readers!
Being a longtime lurker, your tireless work and dedication to the community have enabled me to unlock and root many different android devices over the years and I am deeply grateful this place exists.
Right now, I plan on adding the recently released
Lenovo Smart Tab M10 FHD Plus 2nd Gen [ZA5T0302SE / TB-X606F, I believe]
in the WLAN/4GB/64GB variant to my collection. Having grown accustomed to the luxury of root access, I was wondering if anyone already had some experience with rooting the device and would be willing to share his / her knowledge with me.
Especially, I was wondering if this guide for the TB-X605F, which I have successfully used in the past for my older model, would (in principle) be applicable, as long as I could obtain the corresponding firmware for the newer one, which might be available here (as soon as GD wills it).
Any advice / support would be highly appreciated!
[Sidenote]: To my best ability, I wasn’t able to find an existing thread on the topic of rooting the device in question and I hope to have chosen the right forum to post it in (or if the general Q&A would have been the better fit?). If not, dear mods, please be lenient with me and simply move the thread to the proper subforum.
Brotinger said:
Dear and knowledgeable readers!
Being a longtime lurker, your tireless work and dedication to the community have enabled me to unlock and root many different android devices over the years and I am deeply grateful this place exists.
Right now, I plan on adding the recently released
Lenovo Smart Tab M10 FHD Plus 2nd Gen [ZA5T0302SE / TB-X606F, I believe]
in the WLAN/4GB/64GB variant to my collection. Having grown accustomed to the luxury of root access, I was wondering if anyone already had some experience with rooting the device and would be willing to share his / her knowledge with me.
Especially, I was wondering if this guide for the TB-X605F, which I have successfully used in the past for my older model, would (in principle) be applicable, as long as I could obtain the corresponding firmware for the newer one, which might be available here (as soon as GD wills it).
Any advice / support would be highly appreciated!
[Sidenote]: To my best ability, I wasn’t able to find an existing thread on the topic of rooting the device in question and I hope to have chosen the right forum to post it in (or if the general Q&A would have been the better fit?). If not, dear mods, please be lenient with me and simply move the thread to the proper subforum.
Click to expand...
Click to collapse
If you download the lmsa tool, plug in the tablet and go to recovery it will download the full stock firmware. Then you can find it c/program data/LMSA/downloads.
I did that then downloads magisk manager. Extract the boot.img from firmware and put in storage of tablet. Then used magisk manager and patch the boot.img it will tell where it is stored. Extract from tablet and put it in same folder as adb/fast boot. Then put tablet in fastboot and fastboot flash boot magisk-patched.img. then fastboot reboot. The will be rooted with magisk
I forgot. You must unlock bootloader to do this.
Dear 11mackey11,
thank you so very much for caring enough to share your knowledge with me!
So the guide I mentioned earlier is pretty much applicable for the newer model as well? What a relief!
I am also grateful for the hint on how to obtain the stock firmware. For all the dirty things I did to my devices in the past, it never became necessary to put the LMS-Assistant to use, but I will gladly change that now.
As soon as my device arrives, I will try to root it as you suggested and will report back how I fared.
Again, many thanks!
It took me some time to finally get to it … delivery problems with the device … busy work schedule …
… anyhow, I now took the leap and am happy to report that, thanks to your advice, I was able to add another rooted device to my ever-growing collection. “Worked like a charm”, as they use to say.
To repeat myself, I am very grateful for you taking the time to respond to my question and reassuring me that this was the path to follow.
Honestly, thanks!
Brotinger said:
It took me some time to finally get to it … delivery problems with the device … busy work schedule …
… anyhow, I now took the leap and am happy to report that, thanks to your advice, I was able to add another rooted device to my ever-growing collection. “Worked like a charm”, as they use to say.
To repeat myself, I am very grateful for you taking the time to respond to my question and reassuring me that this was the path to follow.
Honestly, thanks!
Click to expand...
Click to collapse
Hi. I just purchased the same tablet. I would appreciate it if you could write up a guide on this forum. It would be a help for everyone.
I'm not even sure how you unlock the bootloader on this thing!
Hi and congratulations on your purchase! The TB-606F is a solid device in my book.
Although I have by now rooted more than a dozen android devices and guess I have at least somewhat of an idea of what I am doing, I am by far no pro on the issue. Basically, I consider myself more a “guide user” than a “guide creator”, still.
But as I have benefited from the kind- and helpfulness of this community many times before, I can’t leave this call for help unanswered.
The thing is, nonetheless, I would really like to refer anyone poised to root their TB-606F to the guide for the TB-605F which I linked to in my initial post. Rooting the TB-606F, in principle, demands the user to undertake the same steps as for rooting the TB-605F.
There are, from the top of my head, only two noticeable differences or variations from that guide which I discovered:
1) firmware
As I still haven’t found a reliable source to obtain the necessary stock firmware by download from the web, the advice of fellow user 11mackey11 comes in very handy who, in response to my initial post, pointed me to the LSMA to download the firmware from your very own device.
2) unlocking bootloader
At least with my device, the fastboot commands known to me to usually unlock the bootloader (as are “fastboot oem unlock-go”, “fastboot oem unlock” or “fastboot flashing unlock”) did not do the trick. I had to resort to the command line of “fastboot flashing unlock” to finally make some progress. This might be an outlier with me device, though, as 11mackey11 did not mention the issue.
Again, I will gladly provide any assistance I can offer, but as for writing up a guide, I would mostly carbon copy turboperson123’s guide for the TB-605F mentioned above anyhow and it does not seem right to take credit for his contributions.
But if you had any specific question, please don’t hesitate to ask and I will answer it to my best knowledge (which might not be much).
Tutorial
I found this tutorial specific to the X606F https://forum.frandroid.com/topic/2...u-lenovo-tab-m10-fhd-plus-tb-x606f-sans-twrp/ alas in French but Google translate makes a decent job out of it
b4nd0ler0 said:
I found this tutorial specific to the X606F https://forum.frandroid.com/topic/2...u-lenovo-tab-m10-fhd-plus-tb-x606f-sans-twrp/ alas in French but Google translate makes a decent job out of it
Click to expand...
Click to collapse
I want to apply it to my device, have you tried this method?
Yes, tried and failed miserably. The tablet is not correctly rooted as reported by Root Checker. The su binary is there and shows it's Magisk but no root proper.
Will try again and report back when done.
b4nd0ler0 said:
Yes, tried and failed miserably. The tablet is not correctly rooted as reported by Root Checker. The su binary is there and shows it's Magisk but no root proper.
Will try again and report back when done.
Click to expand...
Click to collapse
thanks, I'm waiting for news from you. The tablet is sold very much in our country. like this in the world. I'm sure the developers will do something about this device.
b4nd0ler0 said:
I found this tutorial specific to the X606F https://forum.frandroid.com/topic/2...u-lenovo-tab-m10-fhd-plus-tb-x606f-sans-twrp/ alas in French but Google translate makes a decent job out of it
Click to expand...
Click to collapse
I rooted my device with this method
this method doesn't work
Hello dear Android users...
I've got the 3/64GB version of this device (ZA5T0300US) and this method of rooting did not work for me. When I check root in Magisk Manager, it says ctsProfile:false & basicIntegrity:true, so root doesn't work. I tried multiple times and every time had this same result. My ROM version is TB_X606F_USR_S100055_2001030016_V5.196_BMP_ROW (extracted ROM folder name). Are you sure your root actually 100% worked? What is your ROM version?
adroid_user said:
Hello dear Android users...
I've got the 3/64GB version of this device (ZA5T0300US) and this method of rooting did not work for me. When I check root in Magisk Manager, it says ctsProfile:false & basicIntegrity:true, so root doesn't work. I tried multiple times and every time had this same result. My ROM version is TB_X606F_USR_S100055_2001030016_V5.196_BMP_ROW (extracted ROM folder name). Are you sure your root actually 100% worked? What is your ROM version?
Click to expand...
Click to collapse
This method is working!
Use the Official Lenovo website to access your original "rom" file and get the "boot.img" file.
Program: Lenovo Rescue And Smart Assistant https://lnv.gy/3d8FHLi
For an article on how to download the Rom file via the program, see here. (Step 3)
https://bit.ly/2yE1nQf
Good Luck!
adroid_user said:
Hello dear Android users...
I've got the 3/64GB version of this device (ZA5T0300US) and this method of rooting did not work for me. When I check root in Magisk Manager, it says ctsProfile:false & basicIntegrity:true, so root doesn't work. I tried multiple times and every time had this same result. My ROM version is TB_X606F_USR_S100055_2001030016_V5.196_BMP_ROW (extracted ROM folder name). Are you sure your root actually 100% worked? What is your ROM version?
Click to expand...
Click to collapse
You did not enable Magisk Hide
mingkee said:
You did not enable Magisk Hide
Click to expand...
Click to collapse
That was it! Thanks! You're smarter & more helpful than Google!!! ))
Hi.
After i root the tablet, i tried to delete youtube and gdrive. Then i restart the tablet but it stuck in fastboot mode. Not booting.
i couldn't install stock rom. What i must do
I did this..
i patched the boot img from the lenovo program. and i like to shut down my devices when i dont use them and now i cant make it boot. im stuck in a bootloop and its says orange alert when i boot the device. i can only get into the fastboot menu. when i try to boot with vol + and power nothing happens and when i release it starts up again in a bootloop. i cant shut it down either. it just loops and loops. cant do the rescue thing with the program either.. anybody that knows how i can fix this?
I have an out of topic question regarding this tablet.
Can The Lenovo M10 Plus (2nd Gen) 10.3" TB-X606F Output Display via HDMI to TV ???
I tried using a powered USB-C to HDMI adapter to output/mirror the tablet to a TV, but it didn't work.
Brotinger said:
Hi and congratulations on your purchase! The TB-606F is a solid device in my book.
Although I have by now rooted more than a dozen android devices and guess I have at least somewhat of an idea of what I am doing, I am by far no pro on the issue. Basically, I consider myself more a “guide user” than a “guide creator”, still.
But as I have benefited from the kind- and helpfulness of this community many times before, I can’t leave this call for help unanswered.
The thing is, nonetheless, I would really like to refer anyone poised to root their TB-606F to the guide for the TB-605F which I linked to in my initial post. Rooting the TB-606F, in principle, demands the user to undertake the same steps as for rooting the TB-605F.
There are, from the top of my head, only two noticeable differences or variations from that guide which I discovered:
1) firmware
As I still haven’t found a reliable source to obtain the necessary stock firmware by download from the web, the advice of fellow user 11mackey11 comes in very handy who, in response to my initial post, pointed me to the LSMA to download the firmware from your very own device.
2) unlocking bootloader
At least with my device, the fastboot commands known to me to usually unlock the bootloader (as are “fastboot oem unlock-go”, “fastboot oem unlock” or “fastboot flashing unlock”) did not do the trick. I had to resort to the command line of “fastboot flashing unlock” to finally make some progress. This might be an outlier with me device, though, as 11mackey11 did not mention the issue.
Again, I will gladly provide any assistance I can offer, but as for writing up a guide, I would mostly carbon copy turboperson123’s guide for the TB-605F mentioned above anyhow and it does not seem right to take credit for his contributions.
But if you had any specific question, please don’t hesitate to ask and I will answer it to my best knowledge (which might not be much).
Click to expand...
Click to collapse
Hey, thanks for all this useful info. I'm a noob when it comes to rooting. I have hit an issue, that you guys could probably easily advice me. I have got up to where you enter "fastboot flashing unlock" it comes back with something like "waiting for any device". How do I get past this point? I have tried pressing volum up as I saw on a guide however no luck.
unlock not possible
CMX939 said:
Hey, thanks for all this useful info. I'm a noob when it comes to rooting. I have hit an issue, that you guys could probably easily advice me. I have got up to where you enter "fastboot flashing unlock" it comes back with something like "waiting for any device". How do I get past this point? I have tried pressing volum up as I saw on a guide however no luck.
Click to expand...
Click to collapse
I have the same issue, "waiting for device" and adb dies.
I assume, the latest lenovo updates (Android 9) block unlocking.
The current! LMSA tool does not allow to restore an old separately downloaded firmware
Asus' unlock tool for M1 is dead (network error, guess they just cut the line for older models). Attached one I had in my backup from who knows how long ago, since I couldn't find any working links anymore.
Trying unlock tool for newer devices throws "Device model is not supported".
Dev. menu option for OEM Unlock is not available in neither of "official" images.
Max Pro's unlock doesn't work for this device.
So am I really stuck with Android 10 Beta release? I guess it is kind of "win" considering this release isn't completely bloated by Asus, but it would still be nice to get TWRP and Lineage on it. Not to mention I really wanted to give the Postmarket try on this device.
I'm more than willing to be lab rat if anyone wants to try.. stuff.. on my device, at this point I wouldn't even mind if it got bricked in progress.
Alright I have not given up on this, yet. I've stumbled upon post from one of the Asus' moderators on their forums:
For ZB555KL, there will no longer be any system updates and maintenance (including server).
Sorry for any inconvenience it may cause.
Click to expand...
Click to collapse
What this means is there is no official way to unlock this phone anymore, as their unlock app has nothing to communicate with.
In the same thread, another user posted this:
I dont know if you are still looking for this but after working on it for hours what you are looking for is:
in fastboot mode type:
fastboot oem enable-unlock-once
will unlock the bootloader for you until the phone is reset. Just have to do it everytime you reboot back into fastboot.
Also if you're flashing recovery, these other 2 commands may prove useful:
fastboot oem reboot-recovery
fastboot oem reboot-recovery-wipe
Cheers!
Click to expand...
Click to collapse
Indeed using this, I was able to flash recovery. Multiple actually: TWRP, stock from step 3 of the post, OrangeFox, stock again.
Why? Well, booting into any recovery leaves me hanging on black screen.
I've tried TWRP, OrangeFox. Nothing. I have found stock recovery image as well, which I have flashed. Got black screen again. BUT. Thanks to the stock recovery image I've figured out it was actually working, since after pressing some buttons randomly (kind of stupid, I know, but I though its bricked at that point anyway) I've managed to wipe data and was presented with fresh startup. I'm thinking both TWRP and OrangeFox worked as well, its the screen that doesn't want to show things for some reason while in recovery.
So if any of you got any ideas why would any recovery present me with blank screen and how should I deal with it, I'm all ears. Or eyes..