When i boot up the phone, it shows the please input your pin code thing..but then continues booting anyways? It used to allow me to put my pin code in first? Whats going on, and how do i fix it so it allows me to put in the pin before it boots?!
Same problem here.
Me too.
The quick and dirty fix I found is to remove the PIN request and set a phone lock code instead. The phone will always wait for the lock code on startup. The good thing with this is it locks the phone without regards to what SIM card you use. (You can call you SP and request a SIM card disable, right, but not a phone lock)
You can set a timeout for the lock. Additionally, whenever you connect the phone to a new computer it will lock the phone. Good anti-theft mechanism, but I'm sure it's easy to remove if you really want to.
I think it's a generic problem on this phone. I just push the call button again to get the PIN dialog up once more.
sad to hear this is a common problem as it poses a security threat..unless you take other measures. but inputting 2 passwords is quite annoying..ill just wait i guess... does anyone else have problems also that when on 3G the phone appears switched off if someone were to call and it doesnt connect properly?
Hey all,
I would like to do what I can to protect data on my tablet, so I encrypted it. I also put a password screen lock on the device. No probs there. However, if the device is powered on and connected via USB, all contents are readable. I know that theoretically I could always power-off the device when not actively using, but that is quite inconvenient and even if I planned to do that, it could be stolen while powered-on. Since the tablet is probably more likely to be stolen while on than while off, it seems that encryption of the SD card, while a nice idea, is somewhat pointless. Am I missing something?
Is there a setting I can use to prevent USB access so that an attacker would have to break into the screen lock to get to the settings menu?
Is there another way of encrypting (maybe just a part of the SD card?) that would lock when the screen lock comes on?
I'd appreciate thoughts from anyone who has bothered to use encryption on how to deal with these issues.
Thanks!
I don't know if anyone is going to believe this. I decided to test Android Device Manager's lock feature. Worked fine on my tablet. Did not work right on my phone. Now I am locked out of my phone. It would not accept the PIN I selected. I tried sending different PINs and it won't accept any of them! When I change the "message," it does change but the PIN doesn't work.
1) Is there any way to fix this???
2) If not, ugh, if I send an ERASE command, will I be able to get back into the phone?
Help!!
Thanks!
Paul
(I don't know how to prove this isn't a stolen phone - I have full access to it via Device Manager in my google account)
Talked to AT&T. I was screwed. FYI for anyone else... The Android Device Manager Lock may not work right on the AT&T Galaxy S4.
The entire point of locking a phone through ADM is to render it useless for anyone that has stolen it or "found and tried to use it" if it was lost. It's not intended as a tool to be used day to day or for any other reason than loss or theft. As such, I don't see why there would be a need to re-activate the phone after locking it through ADM.
However, if it simply won't let you unlock the lock screen, why not use ODIN to re-flash the firmware and start fresh with an unlocked lock screen?
scott14719 said:
The entire point of locking a phone through ADM is to render it useless for anyone that has stolen it or "found and tried to use it" if it was lost.
Click to expand...
Click to collapse
I should have posted more details. Actually, you can factory reset the phone and it comes out of it fine, albeit factory reset. It doesn't make the phone useless. It just protects the data on your phone with the standard PIN lock screen. It's certainly no kill switch.
To add more info to this - it literally changes the lock screen setting to PIN lock. So, for example, on my tablet, I had a pattern lock. Even after I unlocked it with the ADM PIN I sent, the next time it locked, it was the same PIN lock. I had to go back and change it to the pattern lock.
This is unlike the 3rd party solutions I have used in the past (e.g. Lookout, AVG) which overlay their own lock onto the phone one time only. Once you unlock through their PIN system, the device reverts to whatever locking method you had been using (or none).
This is just what I learned from the experience. Maybe people knew this but it was interesting to me.
PaulQ602 said:
I should have posted more details. Actually, you can factory reset the phone and it comes out of it fine, albeit factory reset. It doesn't make the phone useless. It just protects the data on your phone with the standard PIN lock screen. It's certainly no kill switch.
To add more info to this - it literally changes the lock screen setting to PIN lock. So, for example, on my tablet, I had a pattern lock. Even after I unlocked it with the ADM PIN I sent, the next time it locked, it was the same PIN lock. I had to go back and change it to the pattern lock.
This is unlike the 3rd party solutions I have used in the past (e.g. Lookout, AVG) which overlay their own lock onto the phone one time only. Once you unlock through their PIN system, the device reverts to whatever locking method you had been using (or none).
This is just what I learned from the experience. Maybe people knew this but it was interesting to me.
Click to expand...
Click to collapse
Thanks for the additional info. It's nice to know how it works or is supposed to work. Starting mid-2014, all cell phones sold in the US will be required to have a "kill switch" available. I wonder if it will operate in the same way. I guess time will tell. Again, thanks for the info.
I do wish people who don't read a persons message properly and are not informed on the subject wouldn't waste every ones time posting their drivel aye Scott!
You like so many others state the obvious, I did like your post Paul and thank you for taking the time to post
I have had issues with ADM and have found the application about as useful as Scott's drivel
Hi guys.
I have really weird situation. So when I was setting up my Galaxy Note 4 I chose Fingerprint Scan to be my main authentication method. It prompted me to chose backup password in case Fingerprint scan cannot be read. Unfortunately I did NOT write down somewhere my backup password because I thought that the only case that will ever require me to use it would be losing my thumb finger. Since I was not planning to lose my thumb finger anytime soon I did not think about making sure to write down the backup password I chose....
Now where my problem comes. I have not used this phone for like 2-3 weeks because I use different phone as my primary one. Well guess what happened? After I booted my phone today it does NOT show the usual "Scan your Fingerprint" Screen and instead going directly to "Enter your backup password"
What could have happened?? Did the phone somehow think that somebody scanned wrong finger too many times and now the only way to unlock it is to enter the password? I guess it would be easy to just wipe the phone and start over but there are many pictures that I took on phone's internal memory and did not have a chance to transfer over to my computer... Anyone could PLEASE chime in and tell me how can I make it ask for Fingerprint instead of password?? I would really appreciate to hear what you guys think
Short version:
1. Had Fingerprint as main authentication method
2. Did not write down backup password anywhere
3. After not using the phone for couple weeks now its skipping Fingerprint screen and directly goes to asking for password
4. Any ideas?
Hello everyone.
Well, as stated in the title I really had a week of ****. It started with the theft of my Samsung S7 edge.I am really disgusted
As I really like this phone and the price is interesting now and having a TWRP backup on a USB key I've bought another S7 edge thinking that I could easily reinstall my backup TWRP of my missing phone with all my very valuable data and programs. Unfortunately for now it's total failure. I could actually reinstall my backup but impossible to enter into the phone. I had put after the boot the security by fingerprint plus pin code for the phone and neither function. I am absolutely sure of my pin code, I always use the same but the phone answers me incorrect pin and my fingerprints are not recognized. :crying::crying::crying: I mean that the phone for the first reboot does not accept the fingerprint asks me the code and does not accept it. I tried to flash fingerprint wakeup to be able to use the fingerprint after the first boot but it is even worse the phone say that the fingerprint does not work and that I have to try again later. I specify that I tried the fingerprint with the phone I bought used before installing my backup and that it works properly. In your opinion, is there a way out of this inextricable situation? Is it possible to bypass the fingerprint? Or another solution to recover my data and my programs? Thank you to those who will take the time to read me and to those who will answer me if there are any :fingers-crossed: