Related
Hello, I'm in a bit of a confusing situation so I hope that someone can shed light on it.
Last night I got a notification that my phone is ready to install the 4.4 update. I didn't have the time or the battery to install it then, so I just left my phone until today. Today, I happily pressed the update button, my phone restarted, it started to update and when the bar was a little more then a third full it stopped and said "Error!" (Thanks for a very informative error message Google! ) I restarted my phone, and now my phone reports that it's up to date?! I tried tapping the Check now, but it keeps saying it's up to date. I checked my cache folder, and there is a .zip file containing the update.
My phone is rooted, I used the Nexus 4 Rootkit, but I DIDN'T install a custom recovery or try to install any custom ROMs. (I'm happy with the stock one) I only installed SuperSU so I can grant root access to some apps and that's it. I didn't install any tweaks.
Now if I'm not mistaken, the OTA update should have worked on my phone, because everything is stock. So why did this happen and why I'm not receiving the update prompt again?
Also as a side note: When I went into the fastboot mode and tried to launch the Recovery mode, it said "No command!" and I had restart my phone.
No, you're wrong. You should've gone to SuperSU app and pressed the "full unroot" button before trying to OTAupdate. This would've replaced the modified bin files for root by the original files, allowing the OTA to be applied successfully.
This happens because the rooting process modifies some system files, so the OTA detects a non-stock scenario and aborts its installation. Also when the OTA fails, a flag marks this update as a "fail update" so your system will continue to show you that it's "updated" as he thinks the only update available isn't suitable for you. He is just waiting for the next OTA update.
Now you have to install the OTA via sideload / adb. I would recommend to make a full nandroid backup before everything else. Then fully unroot your phone and apply the OTA using adb.
This is exactly what happened to me when trying to update from 4.2.2 to 4.3. I was root (obtained with Nexus 4 Toolkit from WugFresh) with stock recovery. Just root, nothing else. Then I tried to install OTA, because with older versions to be root was not a problem. But now it is, and my OTA failed as it failed to you.
Then I managed to manually apply the OTA doing what I told you: first backup, then unroot, and finally using the sideload / adb process button present in the toolkit, following its advices at each pont (very VERY well explained for non-experts). You will need to manually download the OTA update to 4.4. Look for that in these forums.
Hope this helps!
LORD MJ said:
Hello, I'm in a bit of a confusing situation so I hope that someone can shed light on it.
Last night I got a notification that my phone is ready to install the 4.4 update. I didn't have the time or the battery to install it then, so I just left my phone until today. Today, I happily pressed the update button, my phone restarted, it started to update and when the bar was a little more then a third full it stopped and said "Error!" (Thanks for a very informative error message Google! ) I restarted my phone, and now my phone reports that it's up to date?! I tried tapping the Check now, but it keeps saying it's up to date. I checked my cache folder, and there is a .zip file containing the update.
My phone is rooted, I used the Nexus 4 Rootkit, but I DIDN'T install a custom recovery or try to install any custom ROMs. (I'm happy with the stock one) I only installed SuperSU so I can grant root access to some apps and that's it. I didn't install any tweaks.
Now if I'm not mistaken, the OTA update should have worked on my phone, because everything is stock. So why did this happen and why I'm not receiving the update prompt again?
Also as a side note: When I went into the fastboot mode and tried to launch the Recovery mode, it said "No command!" and I had restart my phone.
Click to expand...
Click to collapse
nyepo said:
No, you're wrong. You should've gone to SuperSU app and pressed the "full unroot" button before trying to OTAupdate. This would've replaced the modified bin files for root by the original files, allowing the OTA to be applied successfully.
This happens because the rooting process modifies some system files, so the OTA detects a non-stock scenario and aborts its installation. Also when the OTA fails, a flag marks this update as a "fail update" so your system will continue to show you that it's "updated" as he thinks the only update available isn't suitable for you. He is just waiting for the next OTA update.
Now you have to install the OTA via sideload / adb. I would recommend to make a full nandroid backup before everything else. Then fully unroot your phone and apply the OTA using adb.
This is exactly what happened to me when trying to update from 4.2.2 to 4.3. I was root (obtained with Nexus 4 Toolkit from WugFresh) with stock recovery. Just root, nothing else. Then I tried to install OTA, because with older versions to be root was not a problem. But now it is, and my OTA failed as it failed to you.
Then I managed to manually apply the OTA doing what I told you: first backup, then unroot, and finally using the sideload / adb process button present in the toolkit, following its advices at each pont (very VERY well explained for non-experts). You will need to manually download the OTA update to 4.4. Look for that in these forums.
Hope this helps!
Click to expand...
Click to collapse
Thanks. Unfortunetly the OTA update failed even when I tired ADB sideload, so I had to flash the factory image. Now it works like a charm.
LORD MJ said:
Thanks. Unfortunetly the OTA update failed even when I tired ADB sideload, so I had to flash the factory image. Now it works like a charm.
Click to expand...
Click to collapse
It failed because you have modified files in your system, such as modified gps.conf or build.prop, custom kernel and non-official radio will give errors too.
I did a "flash stock+unroot" and relocked my device via the Wug app and it still errors
eksasol said:
It failed because you have modified files in your system, such as modified gps.conf or build.prop, custom kernel and non-official radio will give errors too.
Click to expand...
Click to collapse
I really have no idea how did that happen. Maybe some app modified it or I messed some things up. I'm now going to make a full backup of my phone, so I can apply the next OTA with much less pain.
LORD MJ said:
I really have no idea how did that happen. Maybe some app modified it or I messed some things up. I'm now going to make a full backup of my phone, so I can apply the next OTA with much less pain.
Click to expand...
Click to collapse
The OTA update can fail for many reasons, it could be due to any changes to the /system partition which is what root does, such as changes to gps.conf file, changes in build.prop, different kernel or radio.
If you're going to make a full backup, what you should do is flash a full factory image (link in my signature, and provided you already backup your data.) Then boot into a custom recovery to make a full backup, (not flash the recovery, but: fastboot boot twrp.img) When you do the backup make sure the boot (kernel) and recovery partition are selected. However, you can't backup the radio partition, but that should be fine unless you intend to use the LTE radio.
I have a similar problem. I have ROOTED device with TWRP recovery and stock 4.3 android (obtained OTA before rooting), and I just got notification that my OTA update to 4.4 is ready to be installed.
So I clicked Restart and Install button and the phone restarts(as it should) but after that it went in TWRP recovery and waited for some instruction I suppose. I didn't know what to click exactly, so I clicked Reboot from TWPR menu and it went in fastboot mode. From fastboot I chose Start and phone turns on. Updating didn't even start..
So, were there something that I could do when I was in TWRP recovery that could initiate updating process, or I never had a chance?
What exactly I should do to get that update on my phone? Sorry for my English and if was unclear.
I used Google's batch file on windows to flash the stock 5.0, having unlocked the bootloader and also installed the chainfire root. Just wondering whether I'll get any fixes, or whether i'll have to always repeat this process, wiping out everything on the device in the process.
You may get prompted to download and install new updates when they arrive, but they will fail upon installation unless you're 100% stock.
there will be an OTA update notification if you have stock rom wether you have a sotck or a custom recovery. But if you download and install the OTA update having a custom recovery, the installation will fail and will show an installation or update error. You will be stucked in "no command" image. so better restore your stock recovery as well before downloading any OTA updates..
igeigeige said:
there will be an OTA update notification if you have stock rom wether you have a sotck or a custom recovery. But if you download and install the OTA update having a custom recovery, the installation will fail and will show an installation or update error. You will be stucked in "no command" image. so better restore your stock recovery as well before downloading any OTA updates..
Click to expand...
Click to collapse
Does the Google image download page (https://developers.google.com/android/nexus/images) get updated as Lollipop gets updated? Or am I going to have to do OTA updates?
hmm.. im not sure which comes first.. but, if you want to get OTA, you'll have to wait for your device to get its turn for the notification to appear. The effect will still be the same though if you flash that google image to your device.. And flashing that device, will save you time from waiting for your OTA to appear on your device.
Cheers! :good:
igeigeige said:
hmm.. im not sure which comes first.. but, if you want to get OTA, you'll have to wait for your device to get its turn for the notification to appear. The effect will still be the same though if you flash that google image to your device.. And flashing that device, will save you time from waiting for your OTA to appear on your device.
Cheers! :good:
Click to expand...
Click to collapse
Well, I'm a bit confused. I'm on stock, but i need root, so i installed cfar, which I think included super su. when a new version of super su came out (i was alerted via google play), i needed to install the twrp recovery (which I didn't have installed at that point) to update it. So I guess I'm not stock any more, even though I've not actually put a non-stock image on. So even if the OTA update message popped up, I doubt it's safe to install it that way, even if it let me. I'm just not sure whether I need to a factory reset/wipe etc before updating, or if I can do a dirty update (the OTA is effectively a dirty update, isn't it?). And, like i said, i'm not sure whether that page gets updated with new images, or whether you're supposed to just put the initial one down and then do OTA updates (and only then root, change the recovery etc).
You have a stock rom but with a CUSTOM recovery. Yes, ota will prompt you to update, but DON'T. You should convert to stock recovery first. Because if you do, the update will push through, but once it asks you to boot to make the update in effect, you will have a NO COMMAND error - bootloop, and only fastboot and recovery (sort of dysfunctional). Just like most of the people here, including me. So make backup of your files first before doing the update. Cheers :good:
Sent from my Nexus 10 using XDA Premium 4 mobile app
If having a custom recovery is an issue, why could I flash ota zips from custom recoveries ever since buying the tablet?
igeigeige said:
there will be an OTA update notification if you have stock rom wether you have a sotck or a custom recovery. But if you download and install the OTA update having a custom recovery, the installation will fail and will show an installation or update error. You will be stucked in "no command" image. so better restore your stock recovery as well before downloading any OTA updates..
Click to expand...
Click to collapse
Should have read this first. In the bootloop. Tried flashing back to stuck with nexus toolkit. No luck. Suggestions?
Rizz67 said:
Should have read this first. In the bootloop. Tried flashing back to stuck with nexus toolkit. No luck. Suggestions?
Click to expand...
Click to collapse
Hi, what i did was flashing the official factory image from google via fastboot/bootloader... Make a nandroid backup first though.. Because you'll need to clean flash (system partition/cache and data) to avoid future problems.
please educate me
A few weeks ago I rooted my N4 with CFAR (& of course had to wipe out everything). My understanding was that now that my bootloader is unlocked, I can sideload new images, thus sparing me a rewipe -- & in my ignorance, was anticipating that ChainFire would make 5.0.1 images in due course.
So, If I want to root subsequent 5.x.x releases, how would this work in real life??
Can i just restore stock recovery and then install the 5.0.1 ota update without losing everything?
I just received a notification on my 6P saying that the january security update is available. The thing is that I'm rooted with systemless root, xposed, EX Kernel and TWRP. Can I update using the update button?
With systemless I believe you should be able to.
I just posted about this too....no one got back to me. I got the same message and have more or less the same setup as you. I'm scared to reboot and update lol
Pain-N-Panic said:
I just posted about this too....no one got back to me. I got the same message and have more or less the same setup as you. I'm scared to reboot and update lol
Click to expand...
Click to collapse
No.
If you have TWRP installed you will not be able to take an OTA.
Why bother?
Just flash what you want.
Ok, so if I reboot and my phone tries to install the OTA, what happens?
I have exact the same setup and tried to let the OTA install but in TWRP it aborted because of the mismatching kernel I think (at least it said it expected the generic device name Google angler etc and in stead it found Huawei nexus 6P Dees-troy etc)
So no harm is done when you try to update other than it doesn't work
But as far as I know when using xposed there's no use for systemless root because xposed is changing system partition
This update message won't go away. Can I flash it myself through TWRP with Xposed installed?
You cannot use twrp with an OTA. You need stock recovery. Also I believe that Xposed modifies /system and that in itself would prevent the OTA with stock recovery.
dratsablive said:
You cannot use twrp with an OTA. You need stock recovery. Also I believe that Xposed modifies /system and that in itself would prevent the OTA with stock recovery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
I used step 10 from this guide then re-flashed TWRP, Super Su, ElementalX and everything seems to be fine, no data loss.
Pain-N-Panic said:
Ok, so if I reboot and my phone tries to install the OTA, what happens?
Click to expand...
Click to collapse
Nothing happens. it'll just fail to flash the update. It'll reboot to twrp, attempt to flash the update, and it'll fail the flash. So it just won't flash. Then you'll just reboot the system and nothing will be changed. I think you can flash these minor changes, but if you try to flash a major update through OTA it won't work with out stock recovery because that's part of the flash I think
---------- Post added at 03:40 PM ---------- Previous post was at 03:38 PM ----------
regenwurm16 said:
I have exact the same setup and tried to let the OTA install but in TWRP it aborted because of the mismatching kernel I think (at least it said it expected the generic device name Google angler etc and in stead it found Huawei nexus 6P Dees-troy etc)
So no harm is done when you try to update other than it doesn't work
But as far as I know when using xposed there's no use for systemless root because xposed is changing system partition
Click to expand...
Click to collapse
It does not bored because of mismatched kernel. Because I tried flashing the stock kernel and then OTA and it still did not work
kirkgbolton said:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
I used step 10 from this guide then re-flashed TWRP, Super Su, ElementalX and everything seems to be fine, no data loss.
Click to expand...
Click to collapse
This. At this time it's the only fix. I did it as well. Never flashed a factory image via fastboot before so I was a little intimidated but Heisenberg's guide is so smooth and easy to follow I did it in about 5 minutes lol. Plus it was a great learning experience for me.
Is it likely that eventually TWRP flashable zips will make this process easier? Or is there some sort of restriction with these updates for Nexus phones that will always require fastboot?
Not sure. I do know that the above method only took me about 10 minutes. Yeah it sucks you have to utilize a PC to do it but its really not that bad. Maybe in the future someone will figure out how to implement the updates via flashable zip in recovery.
I struggle with this too. I really hope that someone will find a solution to flash it via .zip (sadly I'm more a programmer than an Android-hacker, otherwise I would try my very best right now ).
Just to point it out, it looks like the article you are referring to has been updated since it was linked. I wouldn't want to wipe userdata, so I think 11. How To Flash The Factory Images (Return To Stock But Leaving Internal Storage Intact) is what you were referring to at the time. Apologies for the resurrection.
I just used the FlashFire app to update my Nexus 6p with the February update and it worked like a charm.
http://nexus5.wonderhowto.com/how-t...thout-losing-root-no-computer-needed-0168428/
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
EDIT: Link to the zip
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
I don't believe so.
In the past you either had to go back to stock or wait on someone to create a compatible update for rooted devices.
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Can you add what variant and build you are using before the update? Also the build afterwards?
KapilFaujdar said:
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Click to expand...
Click to collapse
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
gghose said:
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
Click to expand...
Click to collapse
Yeah I can't find anything in that folder either.
I received the update and applied it. I am not rooted.
I have the XT1687 model.
My current build number is NPN25.137-35
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
bvsbutthd101 said:
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
Click to expand...
Click to collapse
If you have systemless supersu, you should just be able to apply the update after reverting to stock recovery.
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
glight0 said:
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
Click to expand...
Click to collapse
OK, so I tried flashing recovery.img from stock firmware build 33. But the OTA update will not install, instead I get an error after downloading and rebooting (red triangle at recovery mode).
So I tried fully reverting to stock firmware but I decided to skip over erasing userdata. Afterward the OTA downloaded and installed successfully. Keeping userdata does not seem to have caused an issue.
My problem now though is how to get root back without having to wipe userdata after re-flashing TWRP.
Or is this not possible and if I want to root I must first wipe userdata so that TWRP can read internal memory?
bvsbutthd101 said:
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
Click to expand...
Click to collapse
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
If your using a custom recovery flash the stock recovery, then go to the stock recovery and using your computer flash using adb sideboard command. I assume you already know how to do this. Hope that helps.
gghose said:
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
Click to expand...
Click to collapse
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone
There's a workaround to disable the "advanced LTE" or whatever it was called, so I did that. But in the meantime until a more "user friendly" means of updating is available, is there a way I can get rid of this nag screen? Way back on an earlier device (Samsung Charge?) I remember manually editing a "build.prop" file or something to match the latest version so I wouldn't keep getting the software update nag. Is there something that will do the same here, or is there a system app I can freeze in TiB?
My best guess is freezing "Moto Actions 03.022.1.4-N" because it's showing "(updated)" on the side.
rellim113 said:
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone .
Click to expand...
Click to collapse
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
glight0 said:
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
Click to expand...
Click to collapse
Strange, reflashed the stock recovery and adb can't see it (adb devices returns nothing). And when trying to install it via the normal OTA way, the stock recovery tries to install but ends with an error.
That's what happened to me when I tried reverting to stock recovery and then trying to install update from phone Settings app.
I ended up having to revert to stock rom to get ota to apply with settings app. But now I am trying to root again but after installing TWRP data is encrypted again. So looks like I will have to wipe data before re-rooting.
This morning I my phone pesented itself in TWRP.
Maybe this is because over the past days I repeatedly got notifications that a system upgrade wanted to install itself (I have a modified 26s X720 from Tora33).
I rejected those notifications.
Now I am stuck in TWRP and I cannot get around it. What I tried:
Reinstalling previous firmware (Tora33 26s) still on the phone
Restoring a TWRP backup from 6 months ago (TWRP didn't see it, maybe it's from a previous TWRP version, I now have v. 3.1)
Flash via fastbood factory image using Mauro's Tool All In One (error message "can't find file mke2fs.conf")
Wipe data, cache, dalvik cache, system; then install Mauro_V2.2 cleansed 23s firmware which I transferred to the phone
Every time it boots up in TWRP.
Your bricked you never flash ota with twrp you should read before doing anything.
The only thing that can help is ofil.
I suggest you study well before trying it.
Sent from my LEX720 using xda premium
mchlbenner said:
Your bricked you never flash ota with twrp you should read before doing anything.
The only thing that can help is ofil.
I suggest you study well before trying it.
Click to expand...
Click to collapse
Oh boy. Thanks anyway. OTA flashed itself, couldn't stop it. Maybe I made it worse by trying to fix.
The bootloader is not locked according to the AIO tool. I can flash succesfully any firmware, only after flashing the phone will still boot in TWRP. It is strange it still boots in TWRP. Is there no simpler trick like flashing the standard recovery and then flashing OFW?
You mention Ofil; do you think the guide described here work?
Wortelstok said:
Oh boy. Thanks anyway. OTA flashed itself, couldn't stop it. Maybe I made it worse by trying to fix.
The bootloader is not locked according to the AIO tool. I can flash succesfully any firmware, only after flashing the phone will still boot in TWRP. It is strange it still boots in TWRP. Is there no simpler trick like flashing the standard recovery and then flashing OFW?
You mention Ofil; do you think the guide described here work?
Click to expand...
Click to collapse
Yes, that QFIL guide is for the x720.
In my opinion, the best way to return stock is to push update.zip into phones main folder, then install stock recovery, then in this one install update zip then check that OS is working. If it is, then go into twrp and wipe. Can't do it?
I'll mention myself;
https://forum.xda-developers.com/le-pro3/how-to/guide-simple-to-return-to-stock-x720-t3618658
marik1 said:
In my opinion, the best way to return stock is to push update.zip into phones main folder, then install stock recovery, then in this one install update zip then check that OS is working. If it is, then go into twrp and wipe. Can't do it?
I'll mention myself;
https://forum.xda-developers.com/le-pro3/how-to/guide-simple-to-return-to-stock-x720-t3618658
Click to expand...
Click to collapse
If he was just going back stock that would work he flash 28s ota with twrp so this will not work.
Sent from my LEX720 using xda premium
No brick after OFW push 28s
The pushed (unvoluntary) update didn't brick my phone after all. This may be important for those that have modified stock ROMs with TWRP.
Not being able to restore OFW was a bug in Mauro's All-in-One tool which he fixed last night. After I could easily flash 20S or 26S stock from his repository. I would also recommend this as safest/easiest procedure. Afterwards you can just flash TWRP from the same tool and move from there.
By the way, immediately after flashing 20s the FW notified it wanted to update itself, again!
n my opinion, the best way to return stock is to push update.zip into phones main folder, then install stock recovery, then in this one install update zip then check that OS is working. If it is, then go into twrp and wipe. Can't do it?
Click to expand...
Click to collapse
Might have tried that