Hello!
I'm in serious troubles... So I tried to update my phone and now I have next problems...
Phone is locked
FRP is locked
- This 2 means I cant unlock bootloader or anything via fastboot
I can boot into android, but I cant get into it, because I have security email and I have to enter my email, problem is that, that new update's keyboard doesn't work, instead of keyboard it opens Google Voice Typing, from which I can't enter sh*t....
So any suggestions please? I really need that phone... Thanks :crying::crying:
Try to install again the system with dload method.
Potato997 said:
Try to install again the system with dload method.
Click to expand...
Click to collapse
But I had problems with keyboard before... Why this? Help please
You probably messed up something during the installation, that's why you should retry
Potato997 said:
You probably messed up something during the installation, that's why you should retry
Click to expand...
Click to collapse
I reinstalled, still no keyboard, why is this happening? What should I do? Do you have any other EMUI ROM to install over that one, just to be compatible?
Please describe what you did in details.
Potato997 said:
Please describe what you did in details.
Click to expand...
Click to collapse
So I started with downloading:
From: "https://forum.xda-developers.com/huawei-p9lite/development/android-7-emui-5-0-vns-l-cb360-links-t3565117"
I downloaded section "VNS-L21C185B360" - This is my phone btw
I downloaded "http://update.hicloud.com:8180/TDS/d...ull/update.zip"
I unrared it, puted it in dload folder on SD and force update via 3 button method, after that I got success message, then when I booted into Android, really wierd thing was, that it booted up like normaly, really fast, no preloading, no keyboard, I need to confirm android factory reset with my old email (which I can't enter, because only google voice typing is on)
Btw, I factory reseted 10x before installing update and clearing cache
You missed the additional package.. grab it from here:
https://forum.xda-developers.com/huawei-p9lite/how-to/guide-switch-to-c188-installing-b360-t3577575
Potato997 said:
You missed the additional package.. grab it from here:
https://forum.xda-developers.com/huawei-p9lite/how-to/guide-switch-to-c188-installing-b360-t3577575
Click to expand...
Click to collapse
But how do I do that? I mean, can be 2 same files in same folder? Because I need to extract, so how do I do that without reboot? I need to change my SD to computer meanwhile to extract "data full"....
Potato997 said:
You missed the additional package.. grab it from here:
https://forum.xda-developers.com/huawei-p9lite/how-to/guide-switch-to-c188-installing-b360-t3577575
Click to expand...
Click to collapse
It's still saying "Verify your account" and still have keyboard glitch :crying::crying: Please help me, I really need that phone
Cmon, srsly nobody? Why not helping when someone needs help?
MatoXD said:
Cmon, srsly nobody? Why not helping when someone needs help?
Click to expand...
Click to collapse
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Potato997 said:
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
But this is for TWRP users, I have only Hua**** eRecovery, which doesn't work :/
Potato997 said:
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
Well, what should I do now? Please help
Potato997 said:
Have a little patience bro,
Try B380 of c432. Here you go the full guide.. https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
Can you answer? I need help
First rollback to emui 4 so you can access to your phone, then use a TWRP method
Potato997 said:
First rollback to emui 4 so you can access to your phone, then use a TWRP method
Click to expand...
Click to collapse
How am I suppost to do that? Link, steps please... Like you know, I can only flash on stock EMUI 3 button method, I have currently B360 ROM, I can't downgrade easily or uprgrade, I get incompability...
Related
i had update my phone by update.zip from this link
http://firefox.ztems.com/
which is office l one.
after that...the phone dose not read SIM any more..it keep saying searching...
and i cannot downgraded, upgrade, root at all.., what to do now?
does fastboot work?
to get out of that update, I had to flash cwm as recovery, and then flash a update from www.ztedevices.com
and how do it do that?? i tried alot of thing...but did not work
even if i try to flash orginal SW by SD or the NandDL_firefox.exe still no luck.
also i buy this as used, so do not know if it is US or UK on.....
and how do it do that?? i tried alot of thing...but did not work
even if i try to flash orginal SW by SD or the NandDL_firefox.exe still no luck.
also i buy this as used, so do not know if it is US or UK on..
hecatae said:
does fastboot work?
to get out of that update, I had to flash cwm as recovery, and then flash a update from www.ztedevices.com
Click to expand...
Click to collapse
any help??????????????????
isa.ahmed said:
any help??????????????????
Click to expand...
Click to collapse
Download "Update package of Android GB for OPEN device" from this link and then flash it from recovery. You should be able to use your device again on 1.0
Thanks
it is the same link i had attached, and the same made the issue i am in now....
LinuxHolic said:
Download "Update package of Android GB for OPEN device" from this link and then flash it from recovery. You should be able to use your device again on 1.0
Thanks
Click to expand...
Click to collapse
isa.ahmed said:
it is the same link i had attached, and the same made the issue i am in now....
Click to expand...
Click to collapse
Well, if you installed this ROM then you should be able to root by this method and then you can install custom recovery.
that method for me as like asking me to make new window 11
the Q, why if i try to install any SD update it say signature failed?
LinuxHolic said:
Well, if you installed this ROM then you should be able to root by this method and then you can install custom recovery.
Click to expand...
Click to collapse
Finally solved it
i used this update
http://uploaded.net/file/sg97g0qj
and it made it worked...
thanks for this thread
http://forum.xda-developers.com/showthread.php?t=2478426&page=5
isa.ahmed said:
Finally solved it
i used this update
http://uploaded.net/file/sg97g0qj
and it made it worked...
thanks for this thread
http://forum.xda-developers.com/showthread.php?t=2478426&page=5
Click to expand...
Click to collapse
The link that i provided before was exactly the same....
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
EddiFaddy said:
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
Click to expand...
Click to collapse
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Thanks a lot! I will try! I will reply if it worked or not
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Ok, i did follow the steps and it still doesnt boot! What should i try next?
If you installed an update zip it probably wants the stock recovery which you can get in the development thread on this forum. Flash that through fastboot then throw a folder named dload with an update.app in it on your sd card. Phone off hold power vol up and vol down until it brings you to a circle with emui inside. Should run fine after that. If not use the stock recovery to factory reset.
The reason your phone won't boot is because out never encrypted itself.for some reason that means life or death to mate 8 firmware
EddiFaddy said:
Ok, i did follow the steps and it still doesnt boot! What should i try next?
Click to expand...
Click to collapse
when you start the flash.all.bat and you see the unbrick message your phone should be busy and install the above official firmware and recovery.If not run it again disconnect your phone and connect it again when the unbrick message shows.To me worked fine.You must have your phone in fastboot off course
I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry
Please be patient. Soon enough it will be available.
JJBTEXAS said:
I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry
Click to expand...
Click to collapse
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.
Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4
gm007 said:
Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4
Click to expand...
Click to collapse
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138 or even B158.
JJBTEXAS said:
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138.
Click to expand...
Click to collapse
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
gm007 said:
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
I lost all the google apps and the keyboard when I tried to updated from B110 to B136 using step 7 "flash hw_data" but got it all back when with dloading back to B110.
I'm trying the updater now and it seems to be updating to B158! will update.
Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
Any reason to use steps 5 - 9 instead of doing the update from B110?
JJBTEXAS said:
Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
Any reason to use steps 5 - 9 instead of doing the update from B110?
Click to expand...
Click to collapse
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.
gm007 said:
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.
Click to expand...
Click to collapse
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.
JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
sorry but can i ask if you have restore the oeminfo to c636?
eddmecha said:
sorry but can i ask if you have restore the oeminfo to c636?
Click to expand...
Click to collapse
Yes. I did the following:
* Unlock bootloader
* install twrp
1- restore oeminfo for C636 http://www.mediafire.com/?szws87sk7rrkqr6
2- download c636 offline firmware,and flash it from an sd card using 3 buttons method by dload folder. https://forum.xda-developers.com/mat...4/post70465883
3- factory reset from settings.
4-use system update to get the latest firmware.
Basically gm007's but skipping a few steps
The end result was a seemingly complete L29C636B158.
gm007 said:
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.
Click to expand...
Click to collapse
Yes, I believe I did. Is there any reason for me to fix the meid?
JJBTEXAS said:
Yes, I believe I did. Is there any reason for me to fix the meid?
Click to expand...
Click to collapse
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.
gm007 said:
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.
Click to expand...
Click to collapse
That's what I was thinking. I might try another factory reset just to test it.
JJBTEXAS said:
That's what I was thinking. I might try another factory reset just to test it.
Click to expand...
Click to collapse
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?
gm007 said:
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?
Click to expand...
Click to collapse
Reset didn't solve it. I think the update was over 2gb so full firmware.
ajsmsg78 said:
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.
Click to expand...
Click to collapse
hi bro how do u manage that can u full explain ?
Sorry to resurrect the old thread but I am having the same problem with meid number all zeros. The phone seems to work fine except that I cannot get LTE or 4G on certain provider's. Mine is also the US version. What did you do to fix this issue?
Hi,
I played a bit around with my Huawei P9 Lite, but I forgot to save my initial settings (originally it's a branded phone by 3 Austria). - Yes, my bad.
Now I'd like to go to back to the original firmware. I realised that I have firmware VNS-L21C900B161. - But my phone used to have C432, not C900.
What does C900 mean? Do I still get updates? How do I get a C432 firmware?
Sorry for those many questions, but I am desparate. I just want the correct Version for Europe (unbranded). - Also to get the update to Android Nougat.
Any help is appreciated.
Seth01
You must flash oeminfo C432 and then flash update.app...there are good tutorial in youtb.....
It worked, but... :/
Hi
thank you so much for your help. Now I have the European OEM C432 Version.
But if I (re)boot my smartphone now, it says , "Your device has failed verification and may not work properly." - But it does work properly and it also boots normally then.
How do I get rid of this message?
Greetings,
Seth
Seth01 said:
Hi
thank you so much for your help. Now I have the European OEM C432 Version.
But if I (re)boot my smartphone now, it says , "Your device has failed verification and may not work properly." - But it does work properly and it also boots normally then.
How do I get rid of this message?
Greetings,
Seth
Click to expand...
Click to collapse
Reflash firmware. B160.
RazOne said:
Reflash firmware. B160.
Click to expand...
Click to collapse
I am actually afraid to reflash. Will it then not become OEM version C900 again?
Can I flash via SD-Card with the dload folder, or do I need a tool? (I have downloaded and used the "VNS-L21-L22-L31 Toolkit.exe".)
Seth
Did you make factory reset before boot??
Yes, i did. And In the meantime the message is gone. So everything's fine so far.
But my bootloader is still open.
Any idea how to close? The message on reboot that the device can't be trusted, is rather annoying.
Seth
You got to relock.use the toolkit.....for me after downgrade that warning message about bootloader unlock is gone.but in fastboot my phone is unlocked...
Yeah, I'll try tomorrow. I tried to lock with the tool, but it crashed when I tried to.
Thank you to all of you for your help!
Seth
Seth01 said:
I am actually afraid to reflash. Will it then not become OEM version C900 again?
Can I flash via SD-Card with the dload folder, or do I need a tool? (I have downloaded and used the "VNS-L21-L22-L31 Toolkit.exe".)
Seth
Click to expand...
Click to collapse
Nope. It will not become because you will flash the c432 version. That message you get is because you unlocked your bl. A simple relock or firmware flash via dload will solve your problem.
Please Delete, double Posting!
RazOne said:
Nope. It will not become because you will flash the c432 version. That message you get is because you unlocked your bl. A simple relock or firmware flash via dload will solve your problem.
Click to expand...
Click to collapse
Via dload by pressing volume+, volume- and power?
Beni2567 said:
Via dload by pressing volume+, volume- and power?
Click to expand...
Click to collapse
yes
RazOne said:
yes
Click to expand...
Click to collapse
Hi so I'm on nougat and I have all those bugs, my version is L31 EUROPE and I have the right firmware file "UPDATE.APP"and is already on a folder called dload made by me on the SD card.
All I have to do now is turn off the phone and press the 3 buttons and the phone will have marshmellow?
well i think so. im not sure:d have you installed nougat via twrp?
RazOne said:
well i think so. im not sure:d have you installed nougat via twrp?
Click to expand...
Click to collapse
Yh I use TWRP and when it booted the recovery changed to the normal one
My friend has p8 lite and he cant relock and unlock.
The device says "phone unlocked" but we cant install twrp.
How can we fix ıt ? ?
kadirc5 said:
My friend has p8 lite and he cant relock and unlock.
The device says "phone unlocked" but we cant install twrp.
How can we fix ıt ? ?
Click to expand...
Click to collapse
You need to tell more details. What kind of error it's showing when you try to install TWRP?
keikari said:
You need to tell more details. What kind of error it's showing when you try to install TWRP?
Click to expand...
Click to collapse
Always shows FAİLED
kadirc5 said:
Always shows FAİLED
Click to expand...
Click to collapse
That's a bit too little still. But if you believe you are doing everything correct and the TWRP file isn't corrupted then there's one thing that you could try. Though if it works I have no idea why.
When installing use auto-complete when typing the TWRP file name into flash command. (Type few first letters and then press tab)
This helped one guy earlier who I believe had same problem.