TWRP bootloop problem - P8lite Q&A, Help & Troubleshooting

Hi, when i start or restart my phone it only boot on TWRP i can do nothing. Thx if you help me
I apologize for my bad english

Hi, Im here to solve the Problem what did you made flashed a ZIP? Rom or Firmware installed?

In TWRP go to Restart > Bootloader. Then follow this

Related

zuk z1 bootloop when flashing any rom

i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....

Bootloop in twrp

i accidentally tried updating the device (rooted) and it starts in recovery (twrp). help pls :crying::crying: (fixed flashed stock rom)
How did you fix it?
I have the same problem. Tried different twrp for shamrock and rom's but still bricked

complete brick

hi.
i have s935F and i tried to install twrp but somehow it completly bricked my phone
i can enter TWRP but apparently all partitions are gone / dead.
i also can enter donwnload mode.
i have downloaded stock firmwware but ODIN says that it cannot install - gives error. what can i do ? can someone please help me?
i can contribute for help.
please !!!
hello
i dony know how but i finally formated and installed XEU rom. i had to format all/fix partitions with TWRP.
now i am afraid of trying again to install TWRP. i have seen that there are 2 ou 3 different tutorials.
my model is the edge europe. can someone give the exact right method to install twrp and rom please?
i didn't quite understand your problem but after flashing twrp u need to format data using twrp recovery. only then can u boot ur stock rom normally or flash a custom rom.

booting to twrp

Yesterday I unlocked my lg-h870´s bootloader using offical method. after flashing twrp I wasn´t able to boot system because every time I hit reboot system it takes me back to twrp. I tried to install custom rom but after flashing the problem still remains.:crying:
so please tell me what should I do. (sorry for bad english)

Stuck on boot loader because i accidentally deleted my system files and TWRP not work

Hi, I have a problem when flashing this custom rom that i like. The problem started after i WIPED THE SYSTEM FILES, now im stuck on the bootloader and since i'm stuck on the bootloader i can't also boot to the TWRP recovery screen, when i tried re-flashing the recovery it says its ok but didn't really do the job i need this phone ASAP. i use this for work
sorry for bad english this is not my native language, thanks in advance to who can help me because i really need this phone.
JoshuaBunag12 said:
Hi, I have a problem when flashing this custom rom that i like. The problem started after i WIPED THE SYSTEM FILES, now im stuck on the bootloader and since i'm stuck on the bootloader i can't also boot to the TWRP recovery screen, when i tried re-flashing the recovery it says its ok but didn't really do the job i need this phone ASAP. i use this for work
sorry for bad english this is not my native language, thanks in advance to who can help me because i really need this phone.
Click to expand...
Click to collapse
You can use MiFlash tool to install firmware to your device before flashing other roms.

Categories

Resources