Related
Does the Moto Z Force follow Qualcomm's Quick Charge standard or the USB-PD standard? I ask this because the TurboPower™ 15 charger outputs multiple voltages like QC standard; but the TurboPower™ 30 that comes with the Moto Z Force outputs only at 5V at a reasonably high available amperage of 5.7A, which look more like the USB-PD standard.
Additionally: which (if any other than OEM) wall and vehicle chargers available will optimally rapid/quick/turbo charge the Moto Z Force?
Thanks.
Driosenth said:
Does the Moto Z Force follow Qualcomm's Quick Charge standard or the USB-PD standard? I ask this because the TurboPower™ 15 charger outputs multiple voltages like QC standard; but the TurboPower™ 30 that comes with the Moto Z Force outputs only at 5V at a reasonably high available amperage of 5.7A, which look more like the USB-PD standard.
Additionally: which (if any other than OEM) wall and vehicle chargers available will optimally rapid/quick/turbo charge the Moto Z Force?
Thanks.
Click to expand...
Click to collapse
I can tell you this. I have a QuickCharge 3.0 charger at home (USB charging hub) that will not engage TurboCharging on either my Moto Z or my Z Force. However my Nexus 6p charger engages TurboCharging on both phones. Odd... I am going to try a different USB-c cable tonight to see if it does anything on that 3.0 charging hub.
Driosenth said:
Does the Moto Z Force follow Qualcomm's Quick Charge standard or the USB-PD standard? I ask this because the TurboPowerâ?¢ 15 charger outputs multiple voltages like QC standard; but the TurboPowerâ?¢ 30 that comes with the Moto Z Force outputs only at 5V at a reasonably high available amperage of 5.7A, which look more like the USB-PD standard.
Additionally: which (if any other than OEM) wall and vehicle chargers available will optimally rapid/quick/turbo charge the Moto Z Force?
Thanks.
Click to expand...
Click to collapse
Looks like the Moto Z force does not follow QC 3.0 standards. The reason the Nexus 6p charger is working is because it outputs 5V and a 3A current which is Turbo charging as far as Moto is concerned. I think our phones follow the USB PD standard. Reason being is the turbo 30 charger outputs 5V at 5.7amps. that's a lot of current but the voltage stays at 5v. Usb pd can get up to 20v at 5amps for a max off 100w. Quick charging is different in that it ramps up the voltage to 9v or 12 v depending but usually keeps current at 2a and below. USB PD tends to keep voltage low but ramp up the current draw. Quick charge will usually not see more than 3a on most chargers. If it does see 3a our phone will more than likely register as turbo charging. If not we get the standard 5v 2a charging. Bottom line is QC maxes out at 18w I believe. Our phones charge at 28w if you multiply 5v by 5.7a u get 28.5watts. This currently beats QC 3.0 devices which are all mostly 15w chargers hence why the Moto Z has the fastest charging out now. To increase power you either have to up the voltage or the current in amps. Different standards but achieve a similar goal.
I've tried all my QC 2.0 and 3.0 charging devices. Nothing will charge it fast unless it's the TurboPower provided by Moto. That pisses me off so very much.
I dont think these devices (nor the new Nexus phones) use QC or USB-PD. I think they all use something called USB-c fast charging. I returned my QC 3.0 charger and have another one on the way that claims to be USB-c fast charging. Ill report when I have it in 2 days.
If you notice the chargers for the Nexus and Moto Z phones are different than most chargers. The Moto phones have a non removable USB cable and the Nexus has a USB-c connector on both ends.
What I think we are looking for, and what I have on order, is a charger that has a USB-c input on it. I have a charging block that claims to have USB-c fast charging on its USB-c input. The charger I just returned that had QC 3.0 on it also had a USB-c input, but fast charging was not enabled on it. The new one claims to be.
So long story short you need to use a cable with the small C connector on both ends and a charger that has a USB-c port with fast charging enabled on it.
jsmuli2 said:
I've tried all my QC 2.0 and 3.0 charging devices. Nothing will charge it fast unless it's the TurboPower provided by Moto. That pisses me off so very much.
Click to expand...
Click to collapse
Agreed...I even went out and bought a QC 3.0 car charger just for this phone lol
seh6183 said:
I dont think these devices (nor the new Nexus phones) use QC or USB-PD. I think they all use something called USB-c fast charging. I returned my QC 3.0 charger and have another one on the way that claims to be USB-c fast charging. Ill report when I have it in 2 days.
If you notice the chargers for the Nexus and Moto Z phones are different than most chargers. The Moto phones have a non removable USB cable and the Nexus has a USB-c connector on both ends.
What I think we are looking for, and what I have on order, is a charger that has a USB-c input on it. I have a charging block that claims to have USB-c fast charging on its USB-c input. The charger I just returned that had QC 3.0 on it also had a USB-c input, but fast charging was not enabled on it. The new one claims to be.
So long story short you need to use a cable with the small C connector on both ends and a charger that has a USB-c port with fast charging enabled on it.
Click to expand...
Click to collapse
I'm very interested to hear your results
Sent from my XT1650 using Tapatalk
I also tested a Anker QC 3.0 wall charger and in half hour it only charged about 20%. Not quick or turbo speeds...
Very bummed. I just bought a QC 3.0 battery, car charger, and wall charger and threw away the boxes. I guess I can give them to my wife who has a LG G5...
I hope that eventually there are batteries and car charges that will charge this phone quickly. QC 2.0 was a feature that I very much liked on my last Phone (Droid Turbo). Being able to charge at those speeds was very nice on the road or with a battery.
The only other things is I believe our phones are equipped with usb 3.1 standard. I believe this standard allows for up to 20v of power at a max of around 5a. But any charger that does 5v at at least 3a will pit our phone into turbo charging. I have a Verizon branded fast charger that does 5v/3a and it recognizes it as turbo charging and actually does very good. Not as fast as the stock charger but damn close. Motorola stated they follow the USB C standard for charging which is 5v 3a. So i still say it's a form of usb PD that Motorola is basing there technology off of because the amps our stock charger is putting out is 5.7 amps. The usb c standard stops at 3a without usb 3.1 which we have on our phones and usb pd to up the amps. I would love to see you report back with the findings on the new charger!!!
We'll all know soon. I will even tell you the amps it puts out vs the stock charger. I have a way to monitor.
To save y'all time. Look for chargers that output 5v at 3a. These will turbo charge your phone. Just like the Nexus 6p and Nexus 5x our phones do not follow Qualcomm quick charge standards. So those accessories will do nothing for you because QC doesn't put out past 2a. QC does 9v at 1.67a. multiply that and you get 15watts. Same thing as a charger with 5v and 3a. Multiply that and you also get 15w. Different ways of doing it but same end result. Verizon has a wall charger and a car charger that outputs at 5v 3a. It is also Qualcomm quick charge ready for other phones you may have. It also states on the side of the box that it is USB power delivery 2.0 compatible which I think is why it fast charges our phones. You're welcome
The charger I ordered states: "USB C Output: DC 5V/3A". This leads me to believe it will put the phone into "Turbo" charging mode, but it won't actually charge as fast as the stock charger which is 5.7a. Oh well, it's better than nothing I guess. I can still use the stock charger when needed.
---------- Post added at 02:54 PM ---------- Previous post was at 02:40 PM ----------
I literally cannot find any aftermarket charger that will put out more than 3.0 amps. I think thats as high as we can get right now and the Force charger is the only thing out there putting out above that.
Yea I don't think any aftermarket charger right now supports anything above 3a. Our stock charger has a thicker cable as well. Since QC chargers up the voltage and keep a low amp rating they can keep the cable smaller. Voltage doesn't necessarily need a thicker cable but current or the flow of amps does. For more than 3 amps the cable needs to be thicker for more current flowing. Our phones can handle 30 watts of power easily our stock charger outputs 28.5 watts. 15 watts is considered quick charging that's why our phone recognizes it as turbo charging. One plus has a charger that does 5v at 4a that's the closest I know of 20 watts. I would just like the stock charger to have a longer possibly removable cable. Our phones with 5v 3a are really charging the same as the other QC 2.0 and 3.0 devices it's all 15 watts
Back again, now with a bit more info. If the Moto Z Force truly does draw 5.7A @ 5V it follows neither QC-3 nor USB-PD standard. Both like to change voltages, but neither have 5V anywhere approaching 5.7A. Pg 471 of the latest USB standard shows that the max current delivered at 5V is to be 3A before being bumped up to 9V. QC3.0 adjusts voltages via 200mV steps (if anyone has a link to the official technical specifications of QC3.0 please share), but only outputs 18W max.
My next step is to fully drain the Moto Z Force, hook up the charger to a power meter, and measure how much power it truly draws until fully charged. I might have to make a measuring tool that independently measures the voltage and current of both VBus lines if further testing is needed.
Driosenth said:
Back again, now with a bit more info. If the Moto Z Force truly does draw 5.7A @ 5V it follows neither QC-3 nor USB-PD standard. Both like to change voltages, but neither have 5V anywhere approaching 5.7A. Pg 471 of the latest USB standard shows that the max current delivered at 5V is to be 3A before being bumped up to 9V. QC3.0 adjusts voltages via 200mV steps (if anyone has a link to the official technical specifications of QC3.0 please share), but only outputs 18W max.
My next step is to fully drain the Moto Z Force, hook up the charger to a power meter, and measure how much power it truly draws until fully charged. I might have to make a measuring tool that independently measures the voltage and current of both VBus lines if further testing is needed.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.gombosdev.ampere&hl=en
Should be easier and give the same results. What I use.
---------- Post added at 06:24 PM ---------- Previous post was at 06:10 PM ----------
I've come to the conclusion that the USB hub I ordered is as good as it gets. It has 6 ports. 4 ports that vary the amps up to 2.4a, 1 QC 2.0 port, and 1 USB-c 5v/3a port.
I really hope Motorola / Verizon / Aftermarket companies are able to come up with a charger for this device. I love my Moto Z Force, but with the battery mods, I would like to have a charger for work capable of charging the mod as well. I don't know if I'd be able to survive with the 3ft one that came with it. I went out and bought all of the 3.0 accessories and threw out the boxes as well, thinking it would work. No USB A > USB C Chargers I've tried have worked. I'm anxious to hear if anyone has found one that works.
I reached out to Motorola Customer Service, the person had no idea what was going on. I have a Quick Charge 3.0 Aukey charger at my desk, Ampere says it's charging at 4.341v but no turbo power blurb. My buddy has the "Fast Charging" Verizon one, but it doesn't say it either. Hard to tell if it even has QC or not. They did however load the official moto charger (OEM) onto their webpage. I may just have to live with this one. :/
The one I have on order will certainly put the phone into turbo mode. I don't know how many amps it will do but it will be at least 3. As far as finding something above 3, well I couldn't. I ordered my own USB cable as well (C to C) and could have chosen any length. My charger is a hub with 6 ports and one is a QC 2.0 port. Couldn't find one with the fast USB-C port that also had 3.0.
---------- Post added at 08:48 AM ---------- Previous post was at 08:33 AM ----------
Here's some charging stats for you. All in amps.
.25a - USB port on surface pro 4
.97a - Portable battery pack
.23a - Old USB hub on 2.1a port. (Terrible!)
2.5a - Nexus 6p charger. ("Turbo" shows)
5.1a!!! - Factory force charger
Here are some other 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
fliptwister said:
Here are some other 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.blitzwolf.com/BlitzWolf-...-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/AUKEY-Charge...8&qid=1470243655&sr=1-1&keywords=aukey+type-c
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
So these chargers will all "turbo" charge our phones? I'm particularly interested in he car charger...I have an aukey QC 3.0 that I bought for this phone before realizing it wouldn't do the job lol...
But the usb-c port on the one you just posted will actually work right?...
At home I'm not too worried because I generally only charge my phone over night, so a slow charge or short cable isn't a terrible problem
Sent from my XT1650 using Tapatalk
Metfanant said:
So these chargers will all "turbo" charge our phones? I'm particularly interested in he car charger...I have an aukey QC 3.0 that I bought for this phone before realizing it wouldn't do the job lol...
But the usb-c port on the one you just posted will actually work right?...
At home I'm not too worried because I generally only charge my phone over night, so a slow charge or short cable isn't a terrible problem
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
Yes all those chargers should turbo charge the phone. Not as much as the stock charger, but still turbo. If you want a USB hub with multiple ports there are only like 2 options for those. There should be many options for single block home chargers and car chargers though. The hubs are the hard ones to get.
seh6183 said:
Yes all those chargers should turbo charge the phone. Not as much as the stock charger, but still turbo. If you want a USB hub with multiple ports there are only like 2 options for those. There should be many options for single block home chargers and car chargers though. The hubs are the hard ones to get.
Click to expand...
Click to collapse
Does the USB certification matter for the cable? Is a USB 2.0 cable enough or do we need 3.0 or 3.1?
Sent from my XT1650 using Tapatalk
Hello,
Has anyone compared charging times between QuickCharge charger and using a USB-C to USB-C cable charger?
The reason I ask, is because QuickCharge doesn't seem to be all that fast. Plus, when I had my Nexus 6p on the charger using straight USB-C, it seemed to charge really fast. Wondering if I should use my Nexus USB-C charger or not.
The s8 doesn't really support usb-c power delivery, it has its own adaptive charging running at 15watts(9v*1.67v). You will probably get around 10 watts tops using any other charging method.
If yes, Then let me know which brand of charger should i buy!
No.
I think it only supports QC 2.0, though the QC 2.0 charger does not come out of the box. But imo, who needs fast charging when the battery life can last up to 2-3 days with this phone.
in it's specs sheet in gsmarena quick charge 3.0 is listed. That's why i asked.
anyway, what's the best quick charge 2.0 charger out there? and will that charge the device faster than the original charger?
Jaisun said:
in it's specs sheet in gsmarena quick charge 3.0 is listed. That's why i asked.
anyway, what's the best quick charge 2.0 charger out there? and will that charge the device faster than the original charger?
Click to expand...
Click to collapse
The 625 snapdragon processor does support Quick Charge 3.0, but Xiaomi prohibits using it i guess to cut cost, i know some user who try to use QC 3.0 on this phone but it doesn't work, to be honest i'm also not sure about QC 2.0, my advice is you should try testing it first by borrowing QC 2.0 charger with some of your friends/relatives that has QC 2.0 charger before attempting to buy one.
Flynhx said:
The 625 snapdragon processor does support Quick Charge 3.0, but Xiaomi prohibits using it i guess to cut cost, i know some user who try to use QC 3.0 on this phone but it doesn't work, to be honest i'm also not sure about QC 2.0, my advice is you should try testing it first by borrowing QC 2.0 charger with some of your friends/relatives that has QC 2.0 charger before attempting to buy one.
Click to expand...
Click to collapse
No QC 2.0 support for me, tested with new xiaomi powerbank 10000mAh, ampere show max usb current 500 mAh instead of 2000 mAh. However from measurement I can get 1700-2000mAh so still charging fast enough.
Redmi 4 supports Fast Charging (i.e. about 2A), not any form of Quick Charge. The chipset supports it, but as Xiaomi have decided not to pay Qualcomm the royalties they charge for QC, it's disabled at a low level in the phone. It might be possible to enable it via custom kernel, but I don't think it's been done yet if so.
dels07 said:
No QC 2.0 support for me, tested with new xiaomi powerbank 10000mAh, ampere show max usb current 500 mAh instead of 2000 mAh. However from measurement I can get 1700-2000mAh so still charging fast enough.
Click to expand...
Click to collapse
you mean that from the measurement you're getting a CURRENT reading of 1.700 to 2.000 Amps, right? Because mAh is the capacity measurement while A or mA is the current measurement?
To be on topic, the hardware inside (global version - snapdragon) and the battery support QC v1-3 specs but quickcharge is disabled.
The phone will charge at 1.8A or 1800 mA for about 10 minutes between 20% and 55%. battery capacity.
the current raise up while you changed to a qc 3.0 adapter.
goe2car said:
the current raise up while you changed to a qc 3.0 adapter.
Click to expand...
Click to collapse
CURRENT WILL NOT RAISE ABOVE 2A by now. ONLY VOLTAGE WILL BE INCREASE, but with decreasing current.
I tested a bit :
with QC 3 compactible Aukey PA-T16 charger, Ampere shows 2030mA
with Anker 40W 5 port charger Ampere shows 1830mA.
I have a Redmi 4 (standard edition) and I also have a USB Ammeter/Voltmeter which I can use to measure actual voltage and current flow into the device.
Using a standard 2A charger, the device accepts 4.9-5.1v (average 5.0v) at 1.5A (1500ma), and rarely exceeds this due to the voltage drop of the charger circuit /transformer in the wall plug.
Using a Quick Charge 3.0 charger (Capable of 5v, 9v, 12v and dynamically 5v-12v for QC3.0), I was able to charge the Redmi 4 at 6.2v/2.1A. The peak voltage was 6.24V and peak current 2.4A (momentary).
The Redmi 4 will charge at 6.2v and 2.1A with a Quick Charge 3.0 compatible charger when the battery is totally flat. As with all batteries the current slowly decreases as the internal resistance of the battery increases as it charges.
This is 13 Watts of power, 1.7 times higher than the 7.5 watts provided by the included '2A' charger. Thus, while it does not officially have QC3.0 capability, the device is still able to utilise a slight boost from the chipset's compatibility with higher voltages. Realistically, this means you could cut down on the charge time by around 1/3, and even moreso when charging from, for example, 0%-30%.
Hello friends. I got a Nexus 6p, it came with a common charger of the LG 5v 0.85A, with that charger it charges and shows slow charge, but it raises the percentage of the battery. now with any turbo charger that I test, the percentage of the battery decreases, I already tested with the turbo of my honor 8, with an aukey turbo, Motorola turbo of 5v 1.6A- 9v 1.6A- 12v 1.3A and all these do not charged my device. I would like to know if this is common in 6p. I am using RR in version 7.1.2.
s2_maicon said:
Hello friends. I got a Nexus 6p, it came with a common charger of the LG 5v 0.85A, with that charger it charges and shows slow charge, but it raises the percentage of the battery. now with any turbo charger that I test, the percentage of the battery decreases, I already tested with the turbo of my honor 8, with an aukey turbo, Motorola turbo of 5v 1.6A- 9v 1.6A- 12v 1.3A and all these do not charged my device. I would like to know if this is common in 6p. I am using RR in version 7.1.2.
Click to expand...
Click to collapse
The N6P does not support either quick charge, or turbo charge. This doesn't mean it won't charge at all, but will charge slowly. None of the chargers you mentioned will Rapid Charge your device. You need a 5V 3A USB-C charger to do that, and even some of these are not fully compliant with the USB-C standard. One rule of thumb is that if your charger or cable has a USB-A connection, your device will not ever charge over 2.1A, and in many cases much less. You need a USB-C to USB-C cable or charger to get Rapid Charge. Have a look in the N6P Accessories section where all the discussion on chargers and cables is taking place. There you will find a recommendations for the correct charger/cable. Same goes for a car charger. USB-C 5V 3A.
v12xke said:
The N6P does not support either quick charge, or turbo charge. This doesn't mean it won't charge at all, but will charge slowly. None of the chargers you mentioned will Rapid Charge your device. You need a 5V 3A USB-C charger to do that, and even some of these are not fully compliant with the USB-C standard. One rule of thumb is that if your charger or cable has a USB-A connection, your device will not ever charge over 2.1A, and in many cases much less. You need a USB-C to USB-C cable or charger to get Rapid Charge. Have a look in the N6P Accessories section where all the discussion on chargers and cables is taking place. There you will find a recommendations for the correct charger/cable. Same goes for a car charger. USB-C 5V 3A.
Click to expand...
Click to collapse
Thank you very much, my friend. I bought a motorola charger 5v 3a Type C and now it is loading quickly. I ordered by ebay a 6p nexus document. Meanwhile I'm using that same motorola.
If I charge Oneplus 8 pro with lets say Car Charger with supported standards PD 3.0/QC 4.0/ QC 3.0/ AFC , is there a downside? Or just slow charging speed?
And, is there a downside if I need to charge my phone at work for example to take notebook USB Type C charger and plug in... (again apart of slow charge)
Vecera said:
If I charge Oneplus 8 pro with lets say Car Charger with supported standards PD 3.0/QC 4.0/ QC 3.0/ AFC , is there a downside? Or just slow charging speed?
And, is there a downside if I need to charge my phone at work for example to take notebook USB Type C charger and plug in... (again apart of slow charge)
Click to expand...
Click to collapse
The rate of charge just be slower, otherwise no problems, no.
I just got the 8 pro yesterday, IN2025. From what I've read and i just tested your charging speed will be better w/ PD as the phone does not support QC anything and just treats as it regular charging.
I tested the charging at ~70%.
USB PD, 4.2V/1.8A - 2A
QC 3.0 4.2V/1..2A
Warp Charging, 4.2V/4.8A
Warp with regular cable, 4.2V/1.2A
Regular charging 4.2V/1.2A
Hope that helps
okay so my previous phone was a PD 3.0, I have a bunch of charger that are 3.0 which support up to 65W. What would it do with the OnePlus 8 Pro. will it be limited to 35W or will it go higher?
Always limited by the phone max specs.
so in that case I should still get the 30W from a PD 3.0 charger to the OnePlus 8 Pro?
Cause I don't want to spend $50 for a Warp Charge Car adapter specially if my PD 3.0 charger can provide the same amount of wattage
mbze430 said:
so in that case I should still get the 30W from a PD 3.0 charger to the OnePlus 8 Pro?
Cause I don't want to spend $50 for a Warp Charge Car adapter specially if my PD 3.0 charger can provide the same amount of wattage
Click to expand...
Click to collapse
No, you will not get 30W from your PD charger, it will max out at 15W.
OnePlus only supports PD at 5V, likely because Dash charge only uses 5V. PD caps out at 3A for 5V, so 15W. PD achieves higher wattages by increasing the voltage rather than increasing the amperage like Dash Charge (hence why PD cables are generally thinner than Dash charge ones).
Thorin78 said:
I just got the 8 pro yesterday, IN2025. From what I've read and i just tested your charging speed will be better w/ PD as the phone does not support QC anything and just treats as it regular charging.
I tested the charging at ~70%.
USB PD, 4.2V/1.8A - 2A
QC 3.0 4.2V/1..2A
Warp Charging, 4.2V/4.8A
Warp with regular cable, 4.2V/1.2A
Regular charging 4.2V/1.2A
Hope that helps
Click to expand...
Click to collapse
So in your case all chargers give less than required charging voltage?! AFAIK, only dash/vooc charges at battaries max voltage. others supply 5v. check your data