Hello,
I would like to rebrand via hunkyhuawei, I already bought 5 credit.
However, which one is the european rom ?
http://prntscr.com/fmikhd
Second, question I cannot change my DNS but my phone has not data on it. So I don't mind to not have data recovery. Do I have to change the DNS ?
Thank you.
Ldes.
none of those is EU ROM, you need L29-C432 or L09-C432 depending on whether you need dual SIM or not.
Yes you need to change DNS as the procedure requires the phone to connect to FunkyHuawei's servers via WiFi whilst in eRecovery mode. If you cant change the DNS on you router you're only other option is to use a laptop as a Hotspot and change the DNS on the laptop. If you cant do that either then you need to follow this procedure https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
scook94 said:
none of those is EU ROM, you need L29-C432 or L09-C432 depending on whether you need dual SIM or not.
Yes you need to change DNS as the procedure requires the phone to connect to FunkyHuawei's servers via WiFi whilst in eRecovery mode. If you cant change the DNS on you router you're only other option is to use a laptop as a Hotspot and change the DNS on the laptop. If you cant do that either then you need to follow this procedure https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Click to expand...
Click to collapse
Thank you !
Do I need to do the rebranding first or the ereceovery ?
That is not clear !
Nevermind, I did rebranding first and now I am doing the erecovery
Ldes said:
Thank you !
Do I need to do the rebranding first or the ereceovery ?
That is not clear !
Click to expand...
Click to collapse
Follow the instructions FunkyHuawei provide, if you can't follow these then do not attempt to rebrand your phone.
https://funkyhuawei.club/rebranding
I have done everything correctly step by step. It took me 4 hours.
However, this is the selected firmware : http://prntscr.com/fmsbxl
VKY-L29C432B152
But I got ONYX D189-L23
What happened ?
The EMUI is 3.1 how do I go to 5.1 ?
Is it possible to get huawei's update ?
Ldes said:
I have done everything correctly step by step. It took me 4 hours.
However, this is the selected firmware : http://prntscr.com/fmsbxl
VKY-L29C432B152
But I got ONYX D189-L23
What happened ?
The EMUI is 3.1 how do I go to 5.1 ?
Is it possible to get huawei's update ?
Click to expand...
Click to collapse
same here :crying:
Ldes said:
I have done everything correctly step by step. It took me 4 hours.
However, this is the selected firmware : http://prntscr.com/fmsbxl
VKY-L29C432B152
But I got ONYX D189-L23
What happened ?
The EMUI is 3.1 how do I go to 5.1 ?
Is it possible to get huawei's update ?
Click to expand...
Click to collapse
same here
---------- Post added at 05:36 AM ---------- Previous post was at 05:34 AM ----------
Any Solution?
I found the solution
I found the solution downloaded the public update_data and update_all hw files by the application finder firmware and did the rebrand again worked!
Geris said:
I found the solution downloaded the public update_data and update_all hw files by the application finder firmware and did the rebrand again worked!
Click to expand...
Click to collapse
Hello, can you tell me simple steps to do this please?
atinw said:
Hello, can you tell me simple steps to do this please?
Click to expand...
Click to collapse
I downloaded the firmware finder application I searched the ROM and downloaded the files for it worked out for me
Related
Hi all,
I have my P8 Lite with ALE-L21C15B140 from a Portuguese Telecom called NOS, and I can't update to any version that supports Dual SIM.
Everytime I try this method,
From folder Step1, move complete dload folder to root of microSD card (so, result path should looks like this: H:\dload\UPDATA.APP, for example);
Insert microSD card to the phone, power up phone normally;
Wait for the phone to boot up, and microSD card to be recognized and usable;
Dial *#*#2846579#*#*;
Go to “ProjectMenu” -> “Upgrade” -> “SD card upgrade” and confirm upgrading. Wait until upgrade step finishes, and message “Update Complete” is shown. Device will reboot:
Click to expand...
Click to collapse
the error is always the same: http : // www . emui . com / emotiondownload . php ? mod=restore. Powerkey to confirm reboot system now.
Can someone, please, provide me a "noob" step by step guide so that I can active Dual-Sim support on the device?
Thanks :fingers-crossed:
spinkol said:
Hi all,
I have my P8 Lite with ALE-L21C15B140 from a Portuguese Telecom called NOS, and I can't update to any version that supports Dual SIM.
Everytime I try this method,
the error is always the same: http : // www . emui . com / emotiondownload . php ? mod=restore. Powerkey to confirm reboot system now.
Can someone, please, provide me a "noob" step by step guide so that I can active Dual-Sim support on the device?
Thanks :fingers-crossed:
Click to expand...
Click to collapse
Wich version do you try to flash (full name please) and also is your bootloader unlocked?
btw you're doing this trough local update. that doesn't work
---------- Post added at 12:42 PM ---------- Previous post was at 12:37 PM ----------
spinkol said:
Hi all,
I have my P8 Lite with ALE-L21C15B140 from a Portuguese Telecom called NOS, and I can't update to any version that supports Dual SIM.
Everytime I try this method,
the error is always the same: http : // www . emui . com / emotiondownload . php ? mod=restore. Powerkey to confirm reboot system now.
Can someone, please, provide me a "noob" step by step guide so that I can active Dual-Sim support on the device?
Thanks :fingers-crossed:
Click to expand...
Click to collapse
here you go http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
Lordbannakaffalatta said:
Wich version do you try to flash (full name please) and also is your bootloader unlocked?
btw you're doing this trough local update. that doesn't work
---------- Post added at 12:42 PM ---------- Previous post was at 12:37 PM ----------
here you go http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977
Click to expand...
Click to collapse
Thanks for the reply
I am trying to flash this version: ALE-L21V100R001C432B046b (2 Steps version), and yes the guide said that this is trough local update.
No, I don't have my bootloader unlocked. Do I need to unlock it?
Best Regards
spinkol said:
Thanks for the reply
I am trying to flash this version: ALE-L21V100R001C432B046b (2 Steps version), and yes the guide said that this is trough local update.
No, I don't have my bootloader unlocked. Do I need to unlock it?
Best Regards
Click to expand...
Click to collapse
yes, you do need to have your bootloader unlocked.
there are many methods to get your unlock code,
http://huaweip8lite.blogspot.com/2016/03/bootloader-huawei-p8-lite-14-huawei.html
Try the above link, for unlocking your bootloader
Check the details in post #2.
---AS OF JANUARY 26, 2017 (JAPAN TIME)---
I want to thank all the users of the original FunkyHuawei. I have decided to expand FunkyHuawei to be useful to even more people, by supporting all recent Huawei phones, adding automation to find and add the latest firmware, and so on. Because of this, I can no longer offer FunkyHuawei as a donation-based program. I will be happy to continue to provide technical support on XDA, if it's welcome here. Feel free to get in touch if you have any questions.
FunkyHuawei 2.0 is now live at
Instructions are available at
You can check supported models at:
Some of the supported models include:
GR5 2017
Honor 6x
Mediapad M3
Y6 II
Nova
P9
Honor8
Honor V8
Honor8 Note
Mate 9 Pro/Porsche
Mate 9
Nova Plus
Honor 5c
GT3
Mate 8
P9 Plus
P9 Lite
(Others)
Well done, brother :highfive:.
opasha said:
Well done, brother :highfive:.
Click to expand...
Click to collapse
BTW, your transaction ID from the previous donation you made is in the database, so feel free to use it.
duraaraa said:
BTW, your transaction ID from the previous donation you made is in the database, so feel free to use it.
Click to expand...
Click to collapse
Awesome, thank you! Getting ready to finally open up my phone today and request the bootloader unlock by calling Huawei as @Tkkg1994 suggested. Going to install TWRP and root (the big thing I was waiting for - once you root, it's hard to go back to stock, lol). I hope we get xposed soon...I read in the recent xda article that it's almost there for Nougat.
opasha said:
Awesome, thank you! Getting ready to finally open up my phone today and request the bootloader unlock by calling Huawei as @Tkkg1994 suggested. Going to install TWRP and root (the big thing I was waiting for - once you root, it's hard to go back to stock, lol). I hope we get xposed soon...I read in the recent xda article that it's almost there for Nougat.
Click to expand...
Click to collapse
Yes. If you have unlocked bootloader and this tool, you can do anything
I am a complete newbie in this so I have a question:
my unit is model mha-al00 ...its bought in china.
my question is, is it possible to flash it with south east asian firmware I.e. singaporean firmware, and if so, which firmware number is that and is it available on Duaraa server?
if not, then if I flash with european firmware, will all functionality and software features of the phone work without problem?
thanks and sorry if I asked stupid questions.
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
one more question, is there such thing as international firmware? is that the same as european firmware?
---------- Post added at 03:08 PM ---------- Previous post was at 02:54 PM ----------
so by flashing non chinese firmware, can someone confirm that app twin will allow using double whatsapp account instead of wechat?
ewijaya74 said:
I am a complete newbie in this so I have a question:
my unit is model mha-al00 ...its bought in china.
my question is, is it possible to flash it with south east asian firmware I.e. singaporean firmware, and if so, which firmware number is that and is it available on Duaraa server?
if not, then if I flash with european firmware, will all functionality and software features of the phone work without problem?
thanks and sorry if I asked stupid questions.
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
one more question, is there such thing as international firmware? is that the same as european firmware?
---------- Post added at 03:08 PM ---------- Previous post was at 02:54 PM ----------
so by flashing non chinese firmware, can someone confirm that app twin will allow using double whatsapp account instead of wechat?
Click to expand...
Click to collapse
Yes, European firmware is basically international firmware. It's actually updated more quickly than south asia region firmware. You should try and flash it and see if you like it. Basically, the firmware is all either Chinese or non-Chinese. The non-Chinese firmwares are more or less the same.
You will lose some functionality here and there. Themes will not work any more, for example. Your biggest gain will be better google integration. Please try it and see. Should you want to, you can always flash back to Chinese firmware afterwards.
App twin will not work with WhatsApp unless you unlock your bootloader and flash a non-Chinese oeminfo. I have done that, but you need to get the unlock code from Huawei.
Since I'm on MHA-L29 C636b110 South Asian firmware and want to be up to date:
1) Should I just change my dns to your recommended dns in the B126 thread as @alexhee did and update via OTA before unlocking my bootloader and proceeding to install twrp and root?
OR
2) Should I use this thread's method, permanently change my oeminfo to non-chinese C432, update to latest B126 via OTA, unlock my bootloader, and proceed to install twrp and root?
**Should my bootloader be unlocked before any of the two methods above?**
Really appreciate any help and advice on BEST method to keep all functionality.
opasha said:
Since I'm on MHA-L29 C636b110 South Asian firmware and want to be up to date:
1) Should I just change my dns to your recommended dns in the B126 thread as @alexhee did and update via OTA before unlocking my bootloader and proceeding to install twrp and root?
OR
2) Should I use this thread's method, permanently change my oeminfo to non-chinese C432, update to latest B126 via OTA, unlock my bootloader, and proceed to install twrp and root?
**Should my bootloader be unlocked before any of the two methods above?**
Really appreciate any help and advice on BEST method to keep all functionality.
Click to expand...
Click to collapse
Because you have the South Asian firmware, I may have to make modifications to support your device on this server.
Please give it a try using the free code, and see if it works.
duraaraa said:
Because you have the South Asian firmware, I may have to make modifications to support your device on this server.
Please give it a try using the free code, and see if it works.
Click to expand...
Click to collapse
Ok will do, thanks. So, it's better to change my oeminfo by doing your FunkyHuawei method as opposed to changing the DNS on the router and downloading the B126 OTA via system update as @alexhee did? http://forum.xda-developers.com/mate-9/how-to/ota-b126-available-france-t3514682/page3
duraaraa said:
Because you have the South Asian firmware, I may have to make modifications to support your device on this server.
Please give it a try using the free code, and see if it works.
Click to expand...
Click to collapse
As I understand until now, you only support Chinese and European phone version, and convert the firmware between this two, right?
So if I have C185B110, I can't flash with your method?
dancrow said:
As I understand until now, you only support Chinese and European phone version, and convert the firmware between this two, right?
So if I have C185B110, I can't flash with your method?
Click to expand...
Click to collapse
You should be able to flash any of the European firmwares using the HiSuite method. eRecovery method will not work unless I customize a version for your phone.
I've just tested the method (China => EU) works flawlessly. Thanks a lot
opasha said:
Ok will do, thanks. So, it's better to change my oeminfo by doing your FunkyHuawei method as opposed to changing the DNS on the router and downloading the B126 OTA via system update as @alexhee did? http://forum.xda-developers.com/mate-9/how-to/ota-b126-available-france-t3514682/page3
Click to expand...
Click to collapse
If you're going to change oeminfo, my FunkyHuawei method will be a portion of what you do, but you'll also need BL unlock and TWRP to completely change oeminfo. Basically, what you should do is PM me for more information once your BL is unlocked, and I'll walk you through it step by step because it's a delicate process and I don't want you to get a brick.
duraaraa said:
If you're going to change oeminfo, my FunkyHuawei method will be a portion of what you do, but you'll also need BL unlock and TWRP to completely change oeminfo. Basically, what you should do is PM me for more information once your BL is unlocked, and I'll walk you through it step by step because it's a delicate process and I don't want you to get a brick.
Click to expand...
Click to collapse
Thanks. I'll do that once I get my BL unlock. Have to wait for Huawei China to open in 8 hours in order to call because Huawei UK won't unlock it since the phone is Asia Pacific region.
duraaraa said:
------------------------------
2. HiSuite
------------------------------
This is where things get a little bit complicated. We use HiSuite to install non-authorized ROMs. For example, betas, or other ROMs that Huawei does not want people to install. From FunkyHuawei, you will see a link of a tool to download. You must download this tool if you wish to use the HiSuite installation method.
Click to expand...
Click to collapse
Sorry for this, but I can't find/see the link for the tool on your site. Can you tell how can I download FunkyHisuite.exe app?
Thanks
Latest firmware?
How do I know which firmware is the latest ??
I have the duo sim EU version.
With yesterday the OTA 126 downloaded...
I saw on YouTube a 135 firmware..?
Thanx!!
Installation error (CHINA-TO-EURO)
I've set DNS correctly (verified by successfully getting to www dot funky huawei dot com. I requested the CHINA-TO-EURO firmware (and got "request successful), entered eRecovery on the phone, and went to download. As expected, firmware name was "FunkyHuawei". It gets all the way through the download process, but then at about 81% of installation, I get "Recovery failed" with an exclamation mark.
My phone is a MHA-AL00 running Chinese firmware.
Any ideas?
Does your tool supports the huawei mate 9 pro?
EMUI 8.0 Oreo Download Links for the NOVA 2 Plus-
Download according your build Number
Download-
BAC-L03C212B140 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v101025/f1/full/update.zip
BAC-L21C185B150 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v100570/f1/full/update.zip
BAC-L22C636B140 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v100536/f1/full/update.zip
BAC-L23C469B140 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v98566/f1/full/update.zip
BAC-AL00C00B173 [FULL] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1714/g88/v98115/f1/full/update.zip
Flashing Guide - https://romprovider.com/2017/11/update-emui-8-0-huawei-nova-2-plus/
can i install full firmware on every build number??
Hi my device is BAC-L21C185B150 .. can i install BAC AL00CB173 on my device beacuse its full rom. Also please tell how to install without root and with stock recovery.. sorry for my bad english.?? Alsohow to install updates..???
.
hallo für Huawei nova 2
PIC-LX9???
How to flash this rom?
rameezyp007 said:
Hi my device is BAC-L21C185B150 .. can i install BAC AL00CB173 on my device beacuse its full rom. Also please tell how to install without root and with stock recovery.. sorry for my bad english. Alsohow to install updates..??
.
Click to expand...
Click to collapse
Hi, its not posible and it can be harmful to install a different version, for installing without root you can do it with the FIrmware Finder for Huawei through your version and using a web proxy
---------- Post added at 06:55 PM ---------- Previous post was at 06:49 PM ----------
turkishboy07 said:
How to flash this rom?
Click to expand...
Click to collapse
There are 3 methods:
1.- Through Root with TWRP (you need Unlocked bootloader)
2.- Using HiSuite (you will need Huawei Updater Tool 2.0)
3.- Using your phones OTA update with Firmware Finder for Huawei (a playstore app)
mark332 said:
EMUI 8.0 Oreo Download Links for the NOVA 2 Plus-
Download according your build Number
Download-
BAC-L03C212B140 [OTA]
BAC-L21C185B150 [OTA]
BAC-L22C636B140 [OTA]
BAC-L23C469B140 [OTA]
BAC-AL00C00B173 [FULL]
Flashing Guide -
Click to expand...
Click to collapse
Hi mark332, im following the update guide u gave us but for some reason, even it detects the version BAC-L03C212B140CUSTC212D001 with its 628 Mbs (my phone is a BAC-L03) after update it stays the same it appears only gives patches but doesnt update to Android 8, is there anything i might not be doing?
Is it possible to use these update files for updating the Huawei Nova 2 (PIC-LX9)?
well full version for BAC-L21C185B150 is not included ..... i have the same build and this update in not oreo !
can you proof oreo from it with screenshot ?
@ahrion this is a guide to brick phone
reported!
How can I install this? Can I flash with 3button method?
Already received that one via official OTA in my Nova 2 Plus, but it still being Nougat. Are the links correct?
zeth385 said:
Already received that one via official OTA in my Nova 2 Plus, but it still being Nougat. Are the links correct?
Click to expand...
Click to collapse
Do you man February security patch ??
My device is BAC-L21 and the build number is BAC-L21C185B102.
Can I use the BAC-L21C185B150 update?
3et545 said:
My device is BAC-L21 and the build number is BAC-L21C185B102.
Can I use the BAC-L21C185B150 update?
Click to expand...
Click to collapse
Its not oreo update...its still android 7
crazylife said:
Its not oreo update...its still android 7
Click to expand...
Click to collapse
I do not understand. Does the build number matter? Or only the device model number (BAC-L21)?
3et545 said:
I do not understand. Does the build number matter? Or only the device model number (BAC-L21)?
Click to expand...
Click to collapse
Sure it do matter.
Only the last 3 numbers is the software number
New update guys
crazylife said:
Sure it do matter.
Only the last 3 numbers is the software number
Click to expand...
Click to collapse
I see, thanks.
Any chance you can provide a step-by-step guide for the third method? I don't want to unlock my bootloader and the second method didn't work for me. As for the third method I did try the mention app, but all it did was download the update file on the device and that's it. It doesn't install the update and the phone doesn't detect it either. I tried from the recovery through internal memory and an SD card but still it didn't detect it.
I would appreciate the help.
3et545 said:
I see, thanks.
Any chance you can provide a step-by-step guide for the third method? I don't want to unlock my bootloader and the second method didn't work for me. As for the third method I did try the mention app, but all it did was download the update file on the device and that's it. It doesn't install the update and the phone doesn't detect it either. I tried from the recovery through internal memory and an SD card but still it didn't detect it.
I would appreciate the help.
Click to expand...
Click to collapse
What software installed in ur device?
crazylife said:
What software installed in ur device?
Click to expand...
Click to collapse
Android 7.0
BAC-L21C185B102
I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.
steveleg said:
I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.
Click to expand...
Click to collapse
I bought the huawei P smart which is the European version of Huawei Enjoy 7s. i think we should wait for a forum to be opened here for this device before we can do anything like unlocking bootloader or Rebranding and rooting.
just be patient bro.
I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.
steveleg said:
I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.
Click to expand...
Click to collapse
But I'm allowed to post the link. The instructions are mine.
https://www.android-hilfe.de/forum/...-smart-how-to-root-root-anleitung.866625.html
ChinHon said:
But I'm allowed to post the link. The instructions are mine.
Click to expand...
Click to collapse
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..
steveleg said:
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..
Click to expand...
Click to collapse
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.
ChinHon said:
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.
Click to expand...
Click to collapse
I just tried, but system.img writing failed.
In the rescue.exe compressed folder it seems that there are two files: system.img and vendor.img.
Is vendor.img to be renamed to cust.img?
Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
Just translated the tuto:
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
ChinHon said:
Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
I tried to flash from fastboot cust.img and system.img of P Smart on Enjoy 7S but writing failed.
Probably rebrand on this phone involves other partitions or files (oeminfo?) that I'm still not aware of.
I hope a procedure for rebrand will be released soon.
Click to expand...
Click to collapse
@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.
What is the name of your account? (Savvoh)? I'm moderator there.
ChinHon said:
What is the name of your account? (Savvoh)? I'm moderator there.
Click to expand...
Click to collapse
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.
.....
Savvoh said:
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.
Click to expand...
Click to collapse
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:
ChinHon said:
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:
Click to expand...
Click to collapse
Thanks so much, really appreciate the help. I will do so in the future.
Just to confirm what would be the reason to flash and install a TWRP? For dev reasons only?
Or just to remove all the preset Chinese settings?
@ChinHon
Interesting i can install all the services from Google-Installer-v3 onto a Enjoy 7S, but can not open the Play Store or Drive as it just hangs on the loading screen. And never actually goes in.
Haha, im stumped .
Find the current Playstore Apk from the net and install it.
TWRP is necessary for Magisk rooting or to create backups or flash zip`s.
I can't help much with dabranding. I don't know very much about that.
Savvoh said:
@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.
Click to expand...
Click to collapse
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.
steveleg said:
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.
Click to expand...
Click to collapse
I wish i could help,I cant currently even get any Google option on the Enjoy 7S to run. Even trying to add a google account to cloud just freezes. Seems as soon as any Google option is chosen, the Google Services just states "Restarting".
Out of options.
Google services installation was an easy task compared to rebrand.
Download GMS from the link below:
https://mega.nz/#!WqYwyLyD!l7H8WRHBHs0ZwpyE0w2c7n6AvTSpTF29KjjX7_MM2u8
Procedure:
1. Install GMS (it is going to clear all previous google apps and restart the phone)
2. Install google play that I included in the zip file.
Let me know. For me it worked like a charm.
Hello I'm an android developer and my mate 8 is on android 7.(NXT-L29C185B560).
I need to write apps for android Oreo or Pie so I need to upgrade Huawie didn't send an update for my phone.So I need to upgrade with custom ROM I need help finding one.
The phone is rooted and has TWRP insalled on it already.I also want the oero or pie custom rom have the ability to be rooted.:good:
Thank You.
Can I trust this tool:
https://ministryofsolutions.com/2016/09/guidehow-to-change-region-of-mate7-mate8.html
And make my phone region to china and then install the latest available update?
you can by using SRK tools to debrand to chinese then update to oreo
Is it safe tool ?
And can I downgrade to nought if I want?
Last . does it format my data ?
Thanks a lot
M.abdo said:
you can by using SRK tools to debrand to chinese then update to oreo
Click to expand...
Click to collapse
Sent from my HUAWEI NXT-L29 using Tapatalk
it's safe i rebranded using it
you can return to naugat but it's unsafe to rebrand from chinese again
it will remove all your internal data as you will downgrade first before rebranding
Many thanks foe u
Do you have a link for mor information about these tool
I would like to know a lot before make these step . I'm so worried
M.abdo said:
it's safe i rebranded using it
you can return to naugat but it's unsafe to rebrand from chinese again
it will remove all your internal data as you will downgrade first before rebranding
Click to expand...
Click to collapse
Sent from my HUAWEI NXT-L29 using Tapatalk
Okay sounds cool I'll rebrand the question remained is what brand has the latest update?(Please provide a link to .zip update) and the last question is,if I rebrand before I install oreo what exactly happens I turn on my phone and it has a frimware from Africa but its brand is now China!Will that be able to turn on?Or I should use TWRP to install Chinese firmware from SD card.
Since I'm an android developer I need to have multiple os if possible.Has anyone tried this Or any better one?Can I use it in this case?
https://forum.xda-developers.com/cr...ualboot-dualbootpatcher-simpler-dual-t3297414
M.abdo said:
it's safe i rebranded using it
you can return to naugat but it's unsafe to rebrand from chinese again
it will remove all your internal data as you will downgrade first before rebranding
Click to expand...
Click to collapse
how did u downgrade from emui 8 to 7 am trying to do this for 5 days
Still waiting for personal experience
Any one try it.
Sent from my HUAWEI NXT-L29 using Tapatalk
Yeah me too.Please guide us the people who have done it.
AZ shabrani said:
how did u downgrade from emui 8 to 7 am trying to do this for 5 days
Click to expand...
Click to collapse
You can using hisuit by searching another firmware
---------- Post added at 04:51 AM ---------- Previous post was at 04:46 AM ----------
stevemoretz said:
Okay sounds cool I'll rebrand the question remained is what brand has the latest update?(Please provide a link to .zip update) and the last question is,if I rebrand before I install oreo what exactly happens I turn on my phone and it has a frimware from Africa but its brand is now China!Will that be able to turn on?Or I should use TWRP to install Chinese firmware from SD card.
Click to expand...
Click to collapse
Any chinese brand TL, AL, DL i'm dual sim so i rebranded to DL version
You need to return first to marchemelo to rebrand to chinese firmware after rebranding your phone will be the same except some extra chinese applications you can uninstall
I used srktools can't find the guid now but you can search for it in youtube ot has a video guide thier
M.abdo said:
You can using hisuit by searching another firmware
---------- Post added at 04:51 AM ---------- Previous post was at 04:46 AM ----------
Any chinese brand TL, AL, DL i'm dual sim so i rebranded to DL version
You need to return first to marchemelo to rebrand to chinese firmware after rebranding your phone will be the same except some extra chinese applications you can uninstall
I used srktools can't find the guid now but you can search for it in youtube ot has a video guide thier
Click to expand...
Click to collapse
So I'll go to marshmelo of my region and then rebrand and then install oero the only question left is in the process of rebranding do I need any network connection or it's offline?I don't have stable network and I'm afraid terrible things happen.
stevemoretz said:
So I'll go to marshmelo of my region and then rebrand and then install oero the only question left is in the process of rebranding do I need any network connection or it's offline?I don't have stable network and I'm afraid terrible things happen.
Click to expand...
Click to collapse
You don't need internet connection while debranding you will only need while updating to oreo
M.abdo said:
You don't need internet connection while debranding you will only need while updating to oreo
Click to expand...
Click to collapse
How can I access huawie server to get marshmellow update.zip.I didn't find any link for L29-C185
So I don't know the exact version B?? for marshmellow.
stevemoretz said:
How can I access huawie server to get marshmellow update.zip.I didn't find any link for L29-C185
So I don't know the exact version B?? for marshmellow.
Click to expand...
Click to collapse
You can try using firmware finder or rollback using hisuit
M.abdo said:
You can try using firmware finder or rollback using hisuit
Click to expand...
Click to collapse
I have the firmware finder it found no FULL OTA from marshmelo the first full ota is for nougat.
http://update.hicloud.com:8180/TDS/...2227/f2/full/hw/eu/update_data_full_hw_eu.zip
The links from hicloud says that the files have been deleted.
I don't have a reliable internet connection I rather download zip files then update because I don't want in the middle of the operation things go wrong that's why I didn't try HiSuite.Any live link would be appreciated.
I found NXT-L29BC185B200 live link right now.It's android 6.0.1 I'll go for it tnx.
M.abdo said:
You can try using firmware finder or rollback using hisuit
Click to expand...
Click to collapse
I download B200 tried to install via dload failed said (incompatiblity with current version ) tried with twrp failed.And I wiped my OS and tried again and failed.And lost my OS.Sort of now it shows me android logo instead of huawie logo and it's stuck on the initial setup of nougat.
https://forum.xda-developers.com/mate-8/general/guide-how-to-downgrade-mate-8-emui-5-to-t3515202
I found this and it says the nougat version must be b500 but mine was b560 and tried to install the rollback and it failed again.I don't know what to do?I need my phone.
Couldn't find any download link of b500 did you do that on your b500 or b560?
If b500 please give me a link of NXT-L29C185B500
Tried again and it didn't give me error this time the point is that it doesn't run on B500 it makes your device B500!
After installing marshmellow the bootloader is locked again!