A3300HV-Failed to execute update binary - A3000 Q&A, Help & Troubleshooting

hi guys
i tried to install twrp 3.0.0
but it will bootloop so i restore my backup and then install twrp 2.8.0 ported for a3300hv
now twrp is ok but when i tried to install slim-rom or cm-rom or resurrection-rom
i get this stupid error : faild to execute update binary in slim.zip,cm.zip,res.zip,...
i tried to install with rom installer and not working
what can i do for fix it!
my stock rom version : A3300HV_A442_01_24_150319_ROW_USER

Related

[q] to install update on rom omni 4.4.2 n7100

Hello,
Anyone could help me with this problem:-
I have already rooted my Note 2 N7100 with Omni 4.4.2 Nightly but somehow, on software update, with an update available after checking it, I was unable to flash it successfully. There was an error. I have checked SuperSU as to install SuperSu backup script as I believe it would help me to do update on the current build but I could not do that as it requires installing SuperSu into/system (converting into a system app) first but when I have tried to install and later rebooted my device, it was still the same. On Custom Rom, I could not install supersu backup script and when trying to flash update (after checking it and update is available, it was again not successful.
Any advice?
Salam Husin said:
Hello,
Anyone could help me with this problem:-
I have already rooted my Note 2 N7100 with Omni 4.4.2 Nightly but somehow, on software update, with an update available after checking it, I was unable to flash it successfully. There was an error. I have checked SuperSU as to install SuperSu backup script as I believe it would help me to do update on the current build but I could not do that as it requires installing SuperSu into/system (converting into a system app) first but when I have tried to install and later rebooted my device, it was still the same. On Custom Rom, I could not install supersu backup script and when trying to flash update (after checking it and update is available, it was again not successful.
Any advice?
Click to expand...
Click to collapse
Flash SuperSU in recovery and then you should be able to install the backup script.

[Q] Galaxy Note 3 SM-N900 running android lollipop problem with SuperSU

I recently rooted my device SM-N900 running android lollipop
SuperSU cannot update Binary .. it shows installation failed and when I reboot my device I stuck on boot loop and I have to re-flash official firmware again
help plz
The best way to install SuperSU and update the binary is from recovery. Just go to whatever custom recovery you have (I use TWRP myself), install the latest SuperSU zip package (version 2.46 is the latest AFAIK) from there. I am sure you know where to get the SuperSU zip from.
There will be no need to update or install anything from your ROM after you have done the above.

SuperSU failed

I just did a clean install with my stock rom removing everything and i am now back original status. I installed arter97 Philz Touch Recovery lastest version for my device and when i try to flash the SuperSU lastest version in recovery i get this message Failure, Aborting.
ScreenShot of the Error : http://imgur.com/lvjJpyC
stuff i used:
My stock rom = VTR-G928W8VLU2AOK5-20151211114650
SuperSU = UPDATE-SuperSU-v2.65-20151226141550.zip
Arter97 Philz Touch = arter97-recovery-g928tw8-11.0-philz_touch_6.59.0
i also tried to download the SuperSU on PlayStore and i still cannot install it saying missing SuperSU binary.
anyone can help on this problem ?
thanks
Meminette said:
I just did a clean install with my stock rom removing everything and i am now back original status. I installed arter97 Philz Touch Recovery lastest version for my device and when i try to flash the SuperSU lastest version in recovery i get this message Failure, Aborting.
ScreenShot of the Error : http://imgur.com/lvjJpyC
stuff i used:
My stock rom = VTR-G928W8VLU2AOK5-20151211114650
SuperSU = UPDATE-SuperSU-v2.65-20151226141550.zip
Arter97 Philz Touch = arter97-recovery-g928tw8-11.0-philz_touch_6.59.0
i also tried to download the SuperSU on PlayStore and i still cannot install it saying missing SuperSU binary.
anyone can help on this problem ?
thanks
Click to expand...
Click to collapse
Hey. As far as I remember, arter kernel does auto root your device. You dont need to flash SuperSu. Or maybe you need to flash older SU version. 3 times I've rooted my device but havent flashed any SuperSU. Fyi. Good luck.

Can I install TWRP using CWM ? Old 5.1 Sensation rom currently installed

Hi , I am thinking of upgrading to [ROM/6.0] Androium VUI 1 , but I assume I need to install twrp as [ROM/6.0] Androium VUI 1 is not installable with CWM
BUT my big question , can I simply download TWRP to my SDcard , run CWM and then install TWRP ?
Also can someone post a working link to a suitable CWM installable version of TWRP pls.
If so would that affect my currently installed 5.1 android rom ?
TYI
I used flashify from play store to change my recovery I downloaded twrp to SD and flashify does the rest

sm-j5nltexx - v. sm-j5nlte

For a few days now i have being trying to install a customer ROM on my Samsung J5, EVERY ROM i have downloaded has failed with errors stating that the ROM is for J5nlte NOT for j5nltexx even if the file name has been relating to j5nltexx.
I have tried to change/remove the assert line in the install package with no success.
has anybody got/or can recommend a ROM that WILL work with samsung J5 (j5nltexx) - I Currently have a phone that will not boot into a ROM, but will happily boot into TWRP 3.1.1-0
***Update***
The CM13 firmware installed and initially booted, but then went into a boot loop at "optimising apps", still unable to successfully install a custom ROM of any sort, tried Skies and ASUX both didn't boot, even with an Aroma aware TWRP install (confirmed by attempting to install CM13)
Since rebuilding with a "greek" factory ROM, my phone is now showing as sm-j5lte anymore advise will be well recieved
Thanks in Advance
PB
pdjbarber said:
For a few days now i have being trying to install a customer ROM on my Samsung J5, EVERY ROM i have downloaded has failed with errors stating that the ROM is for J5nlte NOT for j5nltexx even if the file name has been relating to j5nltexx.
I have tried to change/remove the assert line in the install package with no success.
has anybody got/or can recommend a ROM that WILL work with samsung J5 (j5nltexx) - I Currently have a phone that will not boot into a ROM, but will happily boot into TWRP 3.1.1-0
Thanks in Advance
PB
Click to expand...
Click to collapse
first install a aroma supported recovery then install ASUX or Skies ROM i should boot if it dosent let me me know with the error
I have managed to get a booting phone, using an old Samsung Factory ROM (5.1.1), re-rooted using CF-Auto-Root. Re-installed TWRP (this time with Aroma support) from @Zonic here To be able to install CyanogenMod 13.0 for Galaxy J5 Here do i need to Marshmallow (6.0.1) BEFORE i attempt a firmware upgrade?
Thanks

Categories

Resources