Please, can anybody help me with three files:
build.prop - in /system,
custom.bin - in /data,
oeminfo - in /dev/block/platform/hi_mci.0/by-name/
Model device is BTV-W09 - only WiFi, Android is 7, and location is eu!
Firmware must be BTV-W09C100B302.
I would be very grateful!
Related
Someone has Rooted P8 lite with "L21C185B120" or "L21C185B130" help me please!
HI my friends.
I have a P8 lite with ALE-L21C185B130 firmware version and I tried to change my phone location using a method was for Honor 4C exactly!!
After that boot animation of my phone turned to "HONOR" (that method was for Honor 4C exactly), But I forgot to take a backup of my original "oeminfo" file.
So anybody that has Rooted P8 lite with "L21C185B120" or "L21C185B130" firmware please take a copy of "oeminfo" file and upload it for me using this guide:
1. go to ES File Explorer and enable Root Explorer in left side menu> tools
2. go to this path: device/ dev/ block/ platform/ hi_mci.0/ by-nam
3. copy "oeminfo" file from above path (don't change or delete any thing!)
4. Please upload it for me. I need it orgently!
Thanks for your helps.
Solved! >>> http://forum.xda-developers.com/showpost.php?p=65030758&postcount=21
Thanks to Cool_On3
Need some files from Can-L11 c432 , build.prop, custom.bin and oeminfo, anybody can help?
Temanyan said:
Need some files from Can-L11 c432 , build.prop, custom.bin and oeminfo, anybody can help?
Click to expand...
Click to collapse
From which build?
Edit: I looked inside the UPDATE.APP file for the CAN-L11C432B340 build and there were none of those files inside.
lintern said:
From which build?
Click to expand...
Click to collapse
320,330,340 any of that.
Its not in update.app, its in installed firmware on phone. In data folder, system folder and some one else.
Help me
Hello dear friends
Do not be tired
I need a dump file Huawei Can l11
The ears are burned and their hard drive is changed
If there is someone else's phone root, please give me a dummy file
thanks to everyone
Vns-l31c464 need single sim oeminfo and custom.bin files please help please
HwOTA for Huawei P9 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
vovan1982 said:
HwOTA for Huawei P9 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hi, ", it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip" - doesn't work. Is it possible to manually rename files?
Edit: It was my stupidity , everything works fine, thank you !!!
where do I download the firmware files by the way?
there are lots of errors,
there are conflicts in folder names and script paths
Error
there are errors
it's can't run
can you fix it
Hello
took advantage of this solution, to restore your device properly. :fingers-crossed:
I tested it, it works correctly at 200%. :good:
SOURCE forum XDA Mate 10 lite.
**https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
HwOTA for Huawei Mate 10 Lite
1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There's no way around it (unfortnuately), but do not worry again! The device will make a factory reset, so once again, BACKUP your files !!!!!!!!!!
3. Enable 'USB debugging' and 'OEM Unlock' option from setting> developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. must to download for the version which model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA \ Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full _.... zip to update_all_hw.zip
- update.zip do not rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware / rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the whole process is accompanied by prompts.
At the end of the process, everything should work fine ... Be prepared, the bootloader will be locked to fulltext or firmware as a FullOTA.
7. If suddenly it turns out "bootloop" - go into the recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware files with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English !!!