Hi guys,
I recently bought on ebay an unlocked htc hd Orange brand that works with any sim card.
In recent months, I've flashed many Roma (ITA, WWE); then I needed assistance and I reported to the HTC original condition (including original ORANGE ROM latest version)
Now the device does not accept the sim of my mobile operator, tells me "network locked".
So I bought an unlock code from this site "UNLOCKINGONLINE.COM".
I tried to insert it in to the device but It still always "network locked"
What am I doing wrong?
Can you help?
Thank you.
Sounds like you need to use the support from "unlockingonline", so that you can unlock it properly. Hopefully you gave them the correct imei when you were giving them your details. As the one in the phone and the one on the label under the battery can be different entirely.
Hi
I have HTC HD2 T Mobile whic was offficially unloacked by T-Mobile when I moved from USA to India.
Here the phone is working well on Vodafone nw.However I have following problems :-
1.1800 seriesnos in India - Unable to dial. It shows as 1(800)... & never connects.
2. Most of local cel nos 098....doesn't connect.I tried +9198...., 098.... but no luck. Some neetwork like Tata & Reliance work well.
Anyone can suggest a solution?
Thanks in adv
I think installing a custom ROM would sort this, read before proceeding though
Sent from my duel booting beast of a phone
clive48 said:
Hi
I have HTC HD2 T Mobile whic was offficially unloacked by T-Mobile when I moved from USA to India.
Here the phone is working well on Vodafone nw.However I have following problems :-
1.1800 seriesnos in India - Unable to dial. It shows as 1(800)... & never connects.
2. Most of local cel nos 098....doesn't connect.I tried +9198...., 098.... but no luck. Some neetwork like Tata & Reliance work well.
Anyone can suggest a solution?
Thanks in adv
Click to expand...
Click to collapse
You might have to dial 01191 + the number, that is the normal way to access India from the US. But that seems strange, because the access numbers should be via your local phone provider. I'm assuming you changed your SIM chip...
Be careful of custom ROMS - your T-mobile HD2 is different from the international version and will not accept a world wide ROM. The ROM has to be made for T-Mobile US.
Yes please make sure if you use a custom Rom that its made for your US model some can be used for both
Sent from my duel booting beast of a phone
Thanks stevedebi
My problem is limited to some nos. Most of the nos I can dial. Thats what puzzles me.
Like Blackberry, where you select the country prefix in settings, can I select the country in HD2? Or is there some registry tweak to solve this? I am using an India SIM card. There is no issue with SIM as I am able to dial all nos using same SIM in a different phone.
Is there a ROM update for T-Mobile HD2? Pl help with links...
Thanks
Hello guys,
got one atrix at&t 4g in hands right now wich cant accept any sim card. Even the at&t one. Customer told he bought it as unlocked at am usa bestbuy shop and as arrived in home realised it´s locked indeed. As far i can see also to at&t sim card as it asks for network pin. I tried to updated it to [STOCK ROM] Android 2.3.4 Gingerbread 4.5.91 (Safest Update) following xda guide, but it keeps locked also to at&t. N tip or help from someone?
Rgds,
Buy an unlock code perhaps?
i tried
Pat123 said:
Buy an unlock code perhaps?
Click to expand...
Click to collapse
i did it, but the 8-dig unlock code did not work. Will try a 16 dig from a diff supplier. Weird is it should accept at&t sim card. But it doesnot.
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
none sim card
djkinetic said:
im having a bit of a hard time understanding what u mean by the ATT sim not being accepted..if u mean there no signal when u put the sim in, its because ur friend bought it without activating it with an ATT number most likely. In which case a non active ATT sim will not register with the Roaming partners which will show up on ur phone as no service. Get a valid code from a seller such as cellunlock.net i used them and they're code worked perfectly, once u sim unlock the phone then put in a SIM from ur country and it should pick up signal all u have to do then is create a motoblur account or choose to skip that process.
Click to expand...
Click to collapse
Thany u for replying...
Sorry man for yr misunderstading. Wht i mean is wht i said: it does not accept any sim card. Neither one from at&t. Then, if i insert an at&t sim card (yep, i have more than 4 of them) phone asks for network pin, just like it asks when i insert other operators sim card, like claro brazil (i.e).
Its regular expected behavior should be accepting, at least, the at&t sim card since it´s from usa at&t. Of course it would not show network signal cos i am outside usa and my at&t sim cards have no credits, but it should not ask for a network pin when a at&t sim card is inserted.
Rgds,
Gingerblur
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
duvate said:
Hi there Antonio. Had same problem here in Peru. Thanks to Tenfar´s CMW recovery and Gingerblur I managed to make my Atrix work with Claro Peru and Movistar. Just look for them in the development forums.
Click to expand...
Click to collapse
Can you explain what exactly it was that you did to resolve this issue??
up... up...
no success with tenfar´s as suggested by Duvate. N other help pls?
Rgds
8)
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Network pin code
djkinetic said:
sounds like the phone is asking for a SIM Pin or what's known as a PUK Code, which unfortunately if u dont know it, u have to contact the carrier of the sim card for it, my advice would b to try to get a sim unlock code, put the code in just to make sure it is unlocked, then stick the sim for ur country's carrier inside the phone. It will probably ask for a pin again at that point call ur provider, and give them the imei/serial of the sim and ask for the sim pin/puk code. hopefully that resolves the problem. Also do not try to guess the code more then 3 times or u will fry/burn ur sim card and will need a new one.
Click to expand...
Click to collapse
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
antoniolcrd said:
Thank u man, but it prompts for network pin code, no sim card pin code.
Thank u again. I appreciate it.
Click to expand...
Click to collapse
Are you sure it's an ATT Atrix? Could it be that you have for example a Bell Atrix?
p.s. according to widely spread beliefs, if you type in the network unlock code wrong too many times, the phone will become hard locked, meaning it won't accept any sim card. could be that the person you got it from did just that.
If you can still put in a network pin your good. See, you may have an AT&T sim, but it has no service so the phone wont read it until it's unlock. You need to purchase an unlock. DO NOT GO GUESSING. I believe the Atrix has 5 attempts before locking you out forever.
at & t
@xploited
yep, it´s from at&t. It is bundled into at&t pack and also i flashed it OTA last at&t release.
@Purple Drama Llama
yep, it still asks for network pin code to unlock. No one msg like contact operator or phone freezed or whatever. Then i think it may not be hardlocked... yet.
p.s: ordered a third supplier an unlock code. Hope not be refunded this time since i hope it may work good. Wish me luck.
Rgds,
Hi, guys. I have the same problem i've purchased atrix without contract in the at&t retail store, they e-mailed me the unlock code, but the code is wrong i said it to them, they were surprised and e-mailed me another one and it is wrong too they (in the att store) said, that either of them should work and they don't know what to do. i still cant use my sim card. At&t sim was never used in that phone. is it important to have att sim inserted even once? and what to do with the phone?
baseband needed
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
antoniolcrd said:
Hello guys,
pls would some1 upload here the baseband version 1.77.07p?
thnk u all.
Click to expand...
Click to collapse
May wanna search in the correct forums for stuff like that probably get more responses.
Sent from my MB860 using xda premium
At Last!!!!
Hello Folks,
at last i managed to solve it. Flashed 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf back and got the same: unsuccesfull unlock. Then flashed the baseband Retail Brazil Radio.sbf and enter the unlocking code from at&t and Voila... unlocked!!!
Thank you all. Let me quickly get into Aura
Hello!
Junior
I'm also from Brazil and I am having the same problem!
Spend more details on how you achieved this miracle! if you can make the files available used would be great!
I'm with version 2.3.4
Abs
I'm a N00B, but I've spent close to 30 hours reading up on posts the past three days. I have the same problem as stated in the original post... even my AT&T sim results in a request for the unlock code now.
I started with an AT&T Atrix. I unlocked the boot loader, put CWM recovery on, put Alien v4 ROM on...then the next day AT&T called me with my unlock code for international use. When I put a new sim in it asked for the code, but did not accept it "Network unlock result unsuccessful" Two other sims just immediately went to "Subsidy Lock ..." statement without asking for the unlock code... then my AT&T sim stopped working, and went to asking for an unlock code right away. Phone also will not pick up any signal, nor connect to any networks
I have entered many codes many times, and not circumvented the error, nor permanently locked it...
My next steps are to install the Gingerbread 2.3 ROM available here: https://supportforums.motorola.com/thread/49191?start=0&tstart=0
Then use RSD lite to flash the AT&T 4.5.91 firmware available here: http://forum.xda-developers.com/showthread.php?t=1125944
After which I am hoping I can enter the unlock code, then re-unlock the boot loader, and flash back to alien v4 ROM again.
Do you think this will work, or have any other better ideas?
Should I use RSD Lite to flash the original firmware .sbf file?
My best guess is that the unlocked boot loader is preventing the phone from carrier unlocking ???
Extra credit:
- any idea how the phone is not permanently frozen after entering unlock codes up to 50 times?
- Will I need to put CWM recovery on the phone again?
- Any idea how the AT&T sim stopped working (while still working fine in another phone)
Please help and I hope this post will help others...
the boot loader unlock .sbf was only 13 MB, but the original 4.5.91 AT&T firmware .sbf is 1.5 GB unzipped... is flashing this mega-file through RSD lite the way to get this operating, or warrantee returnable again from its present state of unlocked boot loader, and not accepting any sims? Thank You
---------- Post added at 04:31 PM ---------- Previous post was at 03:31 PM ----------
FYI: when installing the MotoBlur Gingerbread 2.3 ROM I get a
"Verifying current system...
assert failed: apply_patch_check ("/... lots of alphanumerics
E:Error in /sdcard/Blur_Version....
(Status 7)
Installation aborted"
any ideas? Thanks for your time on this...
Hi there,i went to my country and i have unlocked the phone by SRS softwere.I have rooted my phone and i don it.
The phone was unlocked,was working fine.
But when i have come back in UK my three sim is not working any more.The sim from my country it was working but another sim from UK no.
My problem was the imei,it was unknown so i went to a service and they rewrite my imei.
Now the phone is working in nay network but in three network no.
What should i do now,i need help.
Thank you.