Hello, sorry for my bad English.
My problem is the following, I have an s7 edge (935) and I made an update via odin by downloading a rom on the net then install a custom rom.
But I noticed that my fingerprint scanner no longer answers ...
Help me I have already reinitialized but nothing.
When I do * # 0 * # then sensor then fingerprint test, this is what appears: even the screenshots. ( Click on the pictures)
thank you for your time
So your first step would be going back to stock and check there if the problem persists.
Related
Hello everyone !
it's been a while that i take my solutions from this forum without participate (I'm not an expert)
i've search some solutions, but I can not find anything even on Google for my little problem ...
So I start :
Since last night my phone was offered the updatefor the 4.3 (from 4.2.2) I can not activate my Wifi, apparently it tries to connect 3x then nothing it disables itself.
I thought it was the announcement of the update who was messing so I did the update with Kies on a Mac (yes I am a player...) that crashed of course ! but the recovery mode (offered by Kies) still worked ....
The wifi is still stuck to my disappointment .
Looking on the forums, some talks about * # 0011 # (Service mode) in the wireless tab on the front line is :
State: DISCONNECTED
everything else is marked N / A and the last line is marked :
Power Save Mode
I have the same data when I turn on wifi during the activation time (which stops and returns dimmed after a time, no message appeared )
My S4 GT-I9505 is not Rooted
have you some solutions or tracks to offer me ? ? it bother me if that is the Wifi is down ......
Thank you for your answers !
brunatos said:
Hello everyone !
it's been a while that i take my solutions from this forum without participate (I'm not an expert)
i've search some solutions, but I can not find anything even on Google for my little problem ...
So I start :
Since last night my phone was offered the updatefor the 4.3 (from 4.2.2) I can not activate my Wifi, apparently it tries to connect 3x then nothing it disables itself.
I thought it was the announcement of the update who was messing so I did the update with Kies on a Mac (yes I am a player...) that crashed of course ! but the recovery mode (offered by Kies) still worked ....
The wifi is still stuck to my disappointment .
Looking on the forums, some talks about * # 0011 # (Service mode) in the wireless tab on the front line is :
State: DISCONNECTED
everything else is marked N / A and the last line is marked :
Power Save Mode
I have the same data when I turn on wifi during the activation time (which stops and returns dimmed after a time, no message appeared )
My S4 GT-I9505 is not Rooted
have you some solutions or tracks to offer me ? ? it bother me if that is the Wifi is down ......
Thank you for your answers !
Click to expand...
Click to collapse
Did you successfully upgrade your phone to 4.3?or are you still at 4.2.2 (hope so).?
Sent from my Phone.
Repulsa said:
Did you successfully upgrade your phone to 4.3?or are you still at 4.2.2 (hope so).?
Sent from my Phone.
Click to expand...
Click to collapse
No i'm now at 4.3 ... apparently some users with AT&T got the same problem with the update ... but i'm in france with the operator Bouygue.
errorpost
brunatos said:
No i'm now at 4.3 ... apparently some users with AT&T got the same problem with the update ... but i'm in france with the operator Bouygue.
Click to expand...
Click to collapse
hello again , would you mind do a factory reset on your phone ? Setting >accounts > backup/restore >reset and check if its gonna fix your problem? if doesnt work go here http://www.sammobile.com/firmwares/2/ and download the stock for your country and flash via odin. Have a nice day.
Misterjunky said:
errorpost
Click to expand...
Click to collapse
Thancks i'll take a look to this. I will search some informations about this file and tutos about the soft (Heimdall)
PLEASE DELETE JUST REALIZED WRONG SECTION
Hi, i've purchased an siii today gti9300 and i am very confused as to what is going on.
First of all, it shows that there is na update available but when I try to download it it says cannot be done because its been modified. (tried the miscrosd fix even though am not using a microsd, and couple of other things and nothing worked)
So I wanted to know if its rooted or not, installed root checked and it says that it is. Then I found out OTA isnt good for a rooted phone. Great so lets unroot!
Went into download mode and the first 2 rows are blank and it appears to tell me that it isnt rooted so i am now very confused as when i tried to flash the stock rom on odin it failed.
below is what I see
product name:
custom binary download: no
current binary: samsung official
system status: custom
I9300XXELL4 is the firmware curtrently instaleld and i wanted to reflash it with the same as its the stock firmware
thanks in advance
The reason I am trying to fix this is because I believe its causing the issue with my touch screen which is tempremental. it works but sometimes i have to press it few times or when i scroll it clicks instead. I read the below which is makign me think the software is to blame:
http://forum.xda-developers.com/showthread.php?t=2630555
http://forum.xda-developers.com/showthread.php?t=2574175&page=2
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED
Please use the red report button and ask a mod to move the post.
product name blank = SDS requires new motherboard .
Please read the faqs and guides .
sudden death syndrome
hello everyone ! I'm facing some serious issue with my s7 edge with fingerprint not working. it gives this' An error has occurred with the fingerprint sensor. If this message appears repeatedly, restart your device.
It's NZ model G935F. So far I have done this but no luck:
1) restarted device
2) wiped cache and data resest
3)flashed stock rom with odin
4) rooted phone with chain fire, Installed titanium backup and from fingerprint app delete data and restart phone! No luck.
5) When i run *#0*# test fingerprint sensor test it says ' Fingerprint initializing Fail '
What else I can do ? I'm currently in India and can't access warranty as it was bought in New Zealand.
indergill said:
hello everyone ! I'm facing some serious issue with my s7 edge with fingerprint not working. it gives this' An error has occurred with the fingerprint sensor. If this message appears repeatedly, restart your device.
It's NZ model G935F. So far I have done this but no luck:
1) restarted device
2) wiped cache and data resest
3)flashed stock rom with odin
4) rooted phone with chain fire, Installed titanium backup and from fingerprint app delete data and restart phone! No luck.
5) When i run *#0*# test fingerprint sensor test it says ' Fingerprint initializing Fail '
What else I can do ? I'm currently in India and can't access warranty as it was bought in New Zealand.
Click to expand...
Click to collapse
I"LL provide DONATION to whosoever can help me !
Id be reflashing a stock rom if all else has failed. If that doesnt work then its a hardware fault. Have you flashed any custom kernels or mods? Have you wet the phone at all?
indergill said:
hello everyone ! I'm facing some serious issue with my s7 edge with fingerprint not working. it gives this' An error has occurred with the fingerprint sensor. If this message appears repeatedly, restart your device.
It's NZ model G935F. So far I have done this but no luck:
1) restarted device
2) wiped cache and data resest
3)flashed stock rom with odin
4) rooted phone with chain fire, Installed titanium backup and from fingerprint app delete data and restart phone! No luck.
5) When i run *#0*# test fingerprint sensor test it says ' Fingerprint initializing Fail '
What else I can do ? I'm currently in India and can't access warranty as it was bought in New Zealand.
Click to expand...
Click to collapse
Ausboy 2011 said:
Id be reflashing a stock rom if all else has failed. If that doesnt work then its a hardware fault. Have you flashed any custom kernels or mods? Have you wet the phone at all?
Click to expand...
Click to collapse
As I said in 3) I have already flashed stock rom and no luck. I just got it from someone so not aware of mods or custom kernels.
Hardware fault then best take it to samsung or refund it
Ausboy 2011 said:
Hardware fault then best take it to samsung or refund it
Click to expand...
Click to collapse
I wish I could ! I bought it from New Zealand but I'm in India now so need a solution!
indergill said:
I wish I could ! I bought it from New Zealand but I'm in India now so need a solution!
Click to expand...
Click to collapse
Hey, Did you fix it? if so, please let me know ..I have the same problem.
This happens to me when I downgrade to Marshmallow from Nougat. Reverting back to Nougat resolves the issue but I wish to downgrade, is there a solution to this?
i23u8 said:
This happens to me when I downgrade to Marshmallow from Nougat. Reverting back to Nougat resolves the issue but I wish to downgrade, is there a solution to this?
Click to expand...
Click to collapse
Yep same thing here. Appears to be an issue with newer hardware releases though the sensor firmware is the same. I wish someone could figure this out.
Hello
I have a serious problem of rotation on my sg5 g900f, accelerometer and gyroscope no longer react.
By doing * # 0 * # no activity on these 2 sensors!
I have formatted everything with odin by doing a "nand erase all", flashed with the last rom in date on samobile without added root and therefore without custom recovery unfortunately always the same ...
Know or are the files that handle the rotation? And can be repaired or flashed
thank you
Hardware problem
Thank you, yes I also think
I have searched on google the problems of rotation of SG5 but in fact I should have done my research on xda
I think youtube is very good for search also :
https://www.youtube.com/watch?v=E_D5W-ZYgwM#t=62.230625
So, I have this lenovo device which had an issue with the fingerprint that weren't recognizing my fingerprint so I tried "as a solution" to remove all of the fingerprint of the root of the device.. The result was that I've screwed up .. So I have no fingerprint anymore..
I tried everything (Installing new version "7.1.1" , Installing old version "5.1.1" , Re-flashing stock rom, Wiping system section. EVERYTHING) Put the files didn't came back !
So I need someone has the device working to install the es file manager and search for the word "fingerprint" and upload all the files so i can put them back manually ..
And thanks in advance.. :good::good:
PS:
The fingerprint menu was disappeared at the beginning of my "Screwing up" then after re-flashing the old stock 5.1.1 it came back put the sensor is not sensing anything
UPDATE!!
Now I was trying to add a fingerprint.. When the process starts the device start to vibrate crazly !
here's a screenshot
https://my.pcloud.com/publink/show?code=XZGwg57ZPzn2dhiAwd4wphpRBsl0vpm7S0my
hi i m also same issue plz update solution fast..
hi i m also same issue plz update solution fast..
Same problem for me
Gannu92 said:
hi i m also same issue plz update solution fast..
Click to expand...
Click to collapse
Tried changing the firmware? I think changing the firmware will definitely work. If it doesn't, then Im damn sure that its a hardware issue.