Related
Q&A for [L][5.0] Android Lpv Dev for Mako [Stable 9002]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
the latest links with android L for Nexus 4 please
hi guys,
please someone explain me, from the 1st post of @sykopompos on this thread I have to download:
1. Mako
GPL KERNEL SOURCE - github.com/Android-L-Porting-Team/android_kernel_mako
*this is just the kernel? or it contein all pakage with android L
2. there are 2 links with Stable 9001, one of them is:
Afh - https://www.androidfilehost.com/?fid=95747613655040584 (or here is the andoid L and at 1 is only kernel?)
but also I can see
3. "9001 to 9002 patch https://www.androidfilehost.com/?fid=95747613655042047"
so, for me to understand:
I have to install 1, then 2 with 9001-stable, then I have to download 3 "9001 to 9002 patch" and install it too, right?
That is all I have to do to have android L on my phone?
Also I have seen a lot of updates there, please someone tell me the latest links with kernel and Android L for my device Nexus4
Thank you!
edit:
1. I just flashed the kernel = failed
2. Stable 9001 = done
3. update 9001 -> 9002 = done
now I `m waiting for start, for the moment I see some bubles: red, green, red and yellow dancind on the screen
I hope it will start
edit2
here we are, my phone just started and I see it have LPV81C as build no.
and few bugs:
1. when I swipe from up to down = nothing
2. the middle button must take me to home screen from any application = nothing
what is next please? thx you!
edit3: I power off it, because I can make an egg on it!
Confirmation of Working Play Store
I'm going to put on my conspiracy hat for a moment and proclaim that Google is forcing us to go back to KitKat for a working Play Store 5.0.31!
Can anyone confirm it's working on non-Android L preview?
@ramjet73 Have you noticed that the "Search this thread" is now available not maximized :highfive:
confirmation for play store
hi,
At last I finished the instalation for Android L on my Nexus 4 and now I have a fully operational phone also Play Store is working and I did some updates + some now instalation like Light Flow wich I find it with Search button on Play Store
info about Android L on my Phone:
Build No. LPV79
Kernel: 3.4.0-perf-ga6edd5e
[email protected] #1
Wed Apr 16 09:33:17 PDT 2014
Baseband version
M9615A-CEFWMAZM-2.0.1700.33
If somenone want to ask me about some application, please be free to send me a pm, or ask here
Thank everyone!
edit: how can I update the kernel to the unleashed one please ? thx
synergist said:
hi,
At last I finished the instalation for Android L on my Nexus 4 and now I have a fully operational phone also Play Store is working and I did some updates + some now instalation like Light Flow wich I find it with Search button on Play Store
info about Android L on my Phone:
Build No. LPV79
Kernel: 3.4.0-perf-ga6edd5e
[email protected] #1
Wed Apr 16 09:33:17 PDT 2014
Baseband version
M9615A-CEFWMAZM-2.0.1700.33
If somenone want to ask me about some application, please be free to send me a pm, or ask here
Thank everyone!
edit: how can I update the kernel to the unleashed one please ? thx
Click to expand...
Click to collapse
1. download latest unleashed kernel from here: https://www.androidfilehost.com/?fid=95747613655044516
2. put that download to your sd-card,
3. reboot into recovery
4. install downloaded and putted file
5. reboot and enjoy!!!!!
new kernel!
Sierra35 said:
1. download latest unleashed kernel from here: https://www.androidfilehost.com/?fid=95747613655044516
2. put that download to your sd-card,
3. reboot into recovery
4. install downloaded and putted file
5. reboot and enjoy!!!!!
Click to expand...
Click to collapse
I just did it and it seems this new kernel have some isues with play store because when I pressed the button "play store" the phone just reboot
hm ...and now it still reboot? second seboot without press anything
3 reboots for now
ok, someone can giveme the link with some new kernel ) ?
edit: the phone is in loop restart, duno what to do coz I don`t have the old functional kernel please someone help me! thx
synergist said:
I just did it and it seems this new kernel have some isues with play store because when I pressed the button "play store" the phone just reboot
hm ...and now it still reboot? second seboot without press anything
3 reboots for now
ok, someone can giveme the link with some new kernel ) ?
edit: the phone is in loop restart, duno what to do coz I don`t have the old functional kernel please someone help me! thx
Click to expand...
Click to collapse
like in original thread is said, new playstore and google updates have issues with the L preview, so uninstall updates if it is possible after clean flash and block updates, maybe....
can`t start the phone
Sierra35 said:
like in original thread is said, new playstore and google updates have issues with the L preview, so uninstall updates if it is possible after clean flash and block updates, maybe....
Click to expand...
Click to collapse
I can`t even start it, it is in loop rebooting, it is start only to see the main screen then ..new reboot
so I can only keep it on "recovery mode" to don`t restart, also I can make egs on it - coz it is verry hot
it seems I have to do a new clean instal with wipe and format all
as I already saw the new Android L ...I will back to LiquidSmoth 4.4.4 Kitkat cos it was verry stable and nic
thx for your help and let `s hope the new L will be stable and nice soon
[Crashes] Android 5.0 9002 on Nexus 4
Hey!
Great job with port Android L to Nexus 4 - Thanks a lot!
I just want to let you know, a multiple Google acoounts makes system totally crash.
Google Play, Google Now and another parts of Android just stoped. I had to install Android one more time. This one with just one Google Account.
Regards,
K.
Unfortunately, Google Play Services has stopped
I am getting this error repeatedly..please help
Some app causes it.
I have to disable Twilight app because of that, when I want to install something between dusk til sunrise
help? bootloop, whit exchange mail
Hello,
Love the rom nice work!!!
But i have a bug/problem: for mine work I need the exchange mail, with the encryption ;-(
When i walk through the steps to get the phone encrypted, i get stuck in a boot loop! At the first reboot.
I don’t get any further after that. The only option is to install a other rom!
Hoop that someone can help me out??
(sorry for mine bad English)
my Q and Problem
hello, i using android L last 2 week but its battery back-up very low so i flash hells-Core-b58_anykernel but its same
also when battery on 20% its directly goes to 10 % or 5% in 2 or 3 second
any kernel with good back up
Nexus 4 Android L Preview not booting
I flash the stable 9001 with the 9001 to 9002 patch and waited for 30 minutes then did a full wipe and still nothing then tried flashing again and still nothing, just overheating.
I think the lib files and binaries need to be checked again. I'm starting to think Nexus 4 wont get 5.0 now.
wator said:
Hello,
Love the rom nice work!!!
But i have a bug/problem: for mine work I need the exchange mail, with the encryption ;-(
When i walk through the steps to get the phone encrypted, i get stuck in a boot loop! At the first reboot.
I don’t get any further after that. The only option is to install a other rom!
Hoop that someone can help me out??
(sorry for mine bad English)
Click to expand...
Click to collapse
Is here any response from the maker??
hey guys just a small question : is any AOSP KK kernel is suitable for use with L Preview Rom?really need the dt2w feature...
thanks in advance
PsyAlik said:
hey guys just a small question : is any AOSP KK kernel is suitable for use with L Preview Rom?really need the dt2w feature...
thanks in advance
Click to expand...
Click to collapse
Jup that sall work i think
They are implemented in the new prieview
Getting error on play services when trying to give google account permission to mightyText, is there a fix for this problem?
vite0150 said:
Getting error on play services when trying to give google account permission to mightyText, is there a fix for this problem?
Click to expand...
Click to collapse
I often have that to. Then i use mine backup phone.. Options below the code box.
Hello Friends,
I have been hanging around for a while now. I tried my hand few times to update my Samsung note3, as Official service is not provided to phones bought from outside India. Sadly.
Current ROM that I flashed was in 2015. But it is unstable. It changed a lot on my phone,
like my model no now looks like - SM-G9250, (originally it was SM-N900) only.
Details of my phone are:
Android Version: 5.0.2
Baseband Version: N900XXUENG1
Kernel version: 3.4.39-5466072
Build Number: Aurora.Full-G9200.Port.No.4.2
Important: Phone is Samsung Note 3 (Exynos)
My question is simple:
Please help me find best / suitable ROM that my device can happily run. Without any Google Service Errors.
If possible, please point me towards instructions about what to do and how to do. Technically I am little confused seeing all the choices here in forum.
Thanks and Regards,
Praveer.
Come on Guys, Help me out. No one has any answer ?
Update fro my side
===============
I tried using [7.1.x|SM-N900| Unofficial LineageOS 14.1 (ha_3g)], I find myself in particular problem, after flashing ROM, GAPPS and SU binaries, the Google Music stops just when I begin to set up the phone (It happens when language is getting selected), upon going further, the "Google Play Services" stop when I am trying to setup the Google A/C, just after setting up wifi on my phone.
Actions taken so far:
===============
I have tried flashing ROM again and again (must be more than 10 times and counting), I have tried flashing ROM + GAPPS before flashing SU. I then tried ROM+SU and then GAPPS. I flashed ROM with GAPPS (Pico) too. The verisons of GAPPS used so far now are SUPER, STOCK & PICO.
Out of all combinations, Pico gives me least headace. But Google Play Service Framework should be same in all packages, right ? In either case, I am always greeted by "Google Music has stopped" just before I begin phone setup.
Plus I noticed when I did factory reset+cleaned internal storage+cache, I always get "E: Resource (front) -(fixed) failed to load" message in logs.
Do this error creating problems in flashing GAPPS ?
Also, Can some one please tell me what should be partitions on the phone (Samsung Note 3 (SM-N900)) Exynos based ? Maybe I have wrongly configured phone setup ! After all, I have tested so many ROMS over last 3-4 years, that I have forgotten the original partitions detail.
Regards,
PrankSter.
Hi there,
I will move your thread in the correct forum dedicated to Note 3 Q&A for more relevant answers.
Good luck
If you flashed a custom rom then logic says ask in that thread .
Sent from my SM-N930F using XDA-Developers Legacy app
What is the model # in download mode?
SUPPORTED DEVICES
• Galaxy Note 7 N930F
• Galaxy Note 7 N930FD
• Galaxy Note 7 N930S
• Galaxy Note 7 N930L
• Galaxy Note 7 N930K
• Galaxy Note FE N935S/L/K
• Galaxy Note FE N935F
Rom features of PIE:
• All app and features from Galaxy Note Fan Edition
• Build on N935FXXU4CSC5
KERNEL FEATURES
* Full Android 9 Pie (apps,framework,libs etc)
Kernel 3.18.91
full version 100% no mod.
CSC Vietnamese!! you can choose you csc
wallpaper S10,Youtube advanced
Support 2 SIM
Mod weather on lock screen
it smooth
Things that are working:
Everything
except... (see below)
Things that are not working:
Iris scanner just on (note 7 SM-N930F) SM-N935F working perfect
That's it
Bugs:
None known thus far
Update 2 : 04/19
Fix littile issue.
Add wallpaper S10
remover Magisk
Add Dolby Atom
Add Dual Speaker
Add Crack Full theme (free lifetime).
Add S Power Planning
Update 3
Fix 3G/4G lte signal
Battery fast
Fix lock device (Dịch vụ thanh toán đã bị gỡ cài đặt trái phép)
Fix Lag on while play in game
Cảm ứng khi game thấy có độ delay mặc dù FPS và Ping game best
Fix Samsung Health on root
Add Google assistant
Add sound S10
you doesn't put pin number after reset just used printfinger
Notice: Youtube advance please doesn't upgrade
How to install the rom:
1. Now boot into TWRP by pressing home+volume up+power on while phone is turned off
2. If TWRP asks you about allowing system to be edited, swipe yes to confirm
3. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
4. After this, reboot recovery and start the rom installer
DOWNLOAD
**Superfast9**
T-MOBILE CSC
Notice: T-Mobile CSC just used for T-Mobile USA plz read before flash this want thank you all!!!
Maybe your device little lag after anything done your device smooth..
Support and donations :
-- Telegram group english HERE.
Credits/Thanks:
-e.h.p.n.tx
- huuhuynh
-XDAVN
Note 7 original still have user in 2019
No dual SIM and won't read sd
So bc of the dual SIM card support my SD card won't work.
why does your rom not work without magisk? I tried every way to remove magisk but each time my system freeze at startup when I uninstall.
Can you redo a rom without root?
We have the update
This can remove on rom but we romver on rom zip
Magisk works on mine
NeRatiK said:
why does your rom not work without magisk? I tried every way to remove magisk but each time my system freeze at startup when I uninstall.
Can you redo a rom without root?
Click to expand...
Click to collapse
Working on my device
I literally pounced on the download, but it says the file is in owner's trash. Can you please reupload?
I LOVE my Note 7 (original) and have been stuck on Nougat port ROM till I saw your post today and could not believe my eyes.
If anyone else has the link to the file, please share, I can't wait to have 9.0 Pie on my DEAR Note 7
royawais said:
I literally pounced on the download, but it says the file is in owner's trash. Can you please reupload?
I LOVE my Note 7 (original) and have been stuck on Nougat port ROM till I saw your post today and could not believe my eyes.
If anyone else has the link to the file, please share, I can't wait to have 9.0 Pie on my DEAR Note 7
Click to expand...
Click to collapse
sorry about that i ready update now. it's working you can download now. thanks
hello, I noticed several problems on the update of the rom:
-the phone application to call plant systematically, it is impossible to use
-The rom is less well optimized than the first version of the rom, slower
-the phone heats faster
Games like fortnite or pokemon go do not work
I am holding off on my install based on this, do you have the original ROM file, can you please share that for me if it doesn't have ant issues?
NeRatiK said:
hello, I noticed several problems on the update of the rom:
-the phone application to call plant systematically, it is impossible to use
-The rom is less well optimized than the first version of the rom, slower
-the phone heats faster
Games like fortnite or pokemon go do not work
Click to expand...
Click to collapse
Thanks you but cover s view and screen mirroring don't work for me (n930f)
thanks , it worked except s view cover (N930FD)
A big thanks to the OP. This ROM works great on my good old N930F which SAMSUNG never got back. :laugh: Ended up keeping it for free!
After installing Magisk, reinstalling aroma GAPPS and some of the goodies from the Magisk module list (especially the Equinox camera mod) plus the Microsoft Launcher on top, everything works great for me. This puts another year of extended use in my second phone. :good::good::good:
ulev said:
A big thanks to the OP. This ROM works great on my good old N930F which SAMSUNG never got back. :laugh: Ended up keeping it for free!
After installing Magisk, reinstalling aroma GAPPS and some of the goodies from the Magisk module list (especially the Equinox camera mod) plus the Microsoft Launcher on top, everything works great for me. This puts another year of extended use in my second phone. :good::good::good:
Click to expand...
Click to collapse
The app to phone plant on your rom?
because for me impossible to call, the app is only bug
NeRatiK said:
The app to phone plant on your rom?
because for me impossible to call, the app is only bug
Click to expand...
Click to collapse
Sorry, I don't understand.
CustomROM Superfast9 H5 stable note 7/fe android 9 Pie by XDAVN with Multi-CSC
Download H5 Stable
Google Drive
Download H5 Stable USA
Google Drive
I tried every root method that I know how. Rom says root undetected, supersu doesn't work..Magisk will not flash.
Sent from my Still Rooted NOTE 8
Installed no problems, thanks very much
who have H0 first version can share with us?
Why does this rom lock my phone after installation? The only way to fix is Odin stock firmware.
SM-N960U OREO using Tapatalk
Hello,
I am curious to see if anyone else had or still has this issue and if there is a fix for it.
Devices involved:
Phone - Samsung Galaxy S10 Plus (SM-G975F) Android Version: 10.0 Build Number G975FXXU4CTC9
Watch - Samsung Galaxy Watch 46mm (NO LTE)
Before rooting with Magisk I was able to pair the watch to the phone using the Galaxy Wearable App and use the watch with no problems. (And it still connects with my unrooted Xiaomi mi 9T)
After rooting my s10+ with Magisk (latest stable and also previous version) I was no longer able to pair the watch. It would start out fine by showing a matching passkey on both devices. I accept the code and they would begin to pair. Once the watch displays "Use phone to complete setup" is when the problems presented.
The Galaxy Wearable app will say its pairing the devices but shows nothing and keeps sending a notification saying it sees the watch and asks to connect or cancel. I tap connect and I get a white screen with a spinning circle. After 3-5 seconds the white screen goes away and 3-5 seconds later I am asked to connect the watch again.
If I go to Settings>Connections>Bluetooth (on the phone) I can see the watch is paired but the app will not complete setup. (I can pair to my car Bluetooth and JBL Xtreme speaker with no problems)
I am using Magisk Hide on the Galaxy Watch Plugin, Galaxy Wearable App, and Samsung Accessory Service but that hasn't helped. Nor does uninstalling and reinstalling Galaxy Wearable App.
Any thoughts?
Please help me, im messing around with this crap since 4 days. (I restored the phone about 20 times with odin an retryed again and again)
Could it be related to tripping knox through rooting (i.e. then some of the Samsung apps will not work e.g. Samsung Health)? I am unable to register S.Health and Wearable (on my rooted S7 edge) will not work.
However, working fine on non-rooted S10+.
Does this help?
https://forum.xda-developers.com/galaxy-s10/how-to/guide-samsung-health-knox-0x1non-root-t4075853
Boot into TWRP and flash @ianmacd's multidisabler
I have the same issue with not rooted s10+ and gear s3
Xenenon said:
Hello,
Exactly Same problem!!!!!
Stuck badly!!!
Any solution!!!!
Ahmed
Click to expand...
Click to collapse
xBrownieCodez said:
Boot into TWRP and flash @ianmacd's multidisabler
Click to expand...
Click to collapse
I did but the problem remains the same!!!
My Galaxy S3 Frontier works fine on Stock rooted + Lineage OS 17.1 .
there is a mgaisk module you can try called "Bluetooth Libary Patcher". Find it in Magisk -- Downloads -- and search for it there (just type bluetooth in search panel on top)
as i said, my watch works as it should.
and for Samsung helath: if youre rooted you just have to add one line in build.prop: ro.config.tima=1
lladwein said:
My Galaxy S3 Frontier works fine on Stock rooted + Lineage OS 17.1 .
there is a mgaisk module you can try called "Bluetooth Libary Patcher". Find it in Magisk -- Downloads -- and search for it there (just type bluetooth in search panel on top)
as i said, my watch works as it should.
and for Samsung helath: if youre rooted you just have to add one line in build.prop: ro.config.tima=1
Click to expand...
Click to collapse
oops! It did not work on mine S10+
Getting frustrated day by day!
I think the era of Rooted Devices is over!!!!!
Xenenon said:
Hello,
I am curious to see if anyone else had or still has this issue and if there is a fix for it.
Devices involved:
Phone - Samsung Galaxy S10 Plus (SM-G975F) Android Version: 10.0 Build Number G975FXXU4CTC9
Watch - Samsung Galaxy Watch 46mm (NO LTE)
Before rooting with Magisk I was able to pair the watch to the phone using the Galaxy Wearable App and use the watch with no problems. (And it still connects with my unrooted Xiaomi mi 9T)
After rooting my s10+ with Magisk (latest stable and also previous version) I was no longer able to pair the watch. It would start out fine by showing a matching passkey on both devices. I accept the code and they would begin to pair. Once the watch displays "Use phone to complete setup" is when the problems presented.
The Galaxy Wearable app will say its pairing the devices but shows nothing and keeps sending a notification saying it sees the watch and asks to connect or cancel. I tap connect and I get a white screen with a spinning circle. After 3-5 seconds the white screen goes away and 3-5 seconds later I am asked to connect the watch again.
If I go to Settings>Connections>Bluetooth (on the phone) I can see the watch is paired but the app will not complete setup. (I can pair to my car Bluetooth and JBL Xtreme speaker with no problems)
I am using Magisk Hide on the Galaxy Watch Plugin, Galaxy Wearable App, and Samsung Accessory Service but that hasn't helped. Nor does uninstalling and reinstalling Galaxy Wearable App.
Any thoughts?
Please help me, im messing around with this crap since 4 days. (I restored the phone about 20 times with odin an retryed again and again)
Click to expand...
Click to collapse
Anything you figure out!
Please do share with me!!!!
I flashed Beyonde Rom 6.7 it comes based on the latest April Patch.
This fixed all my problems
No Bugs yet with this rom
https://forum.xda-developers.com/ga...pment-exynos/rom-beyondrom-v6-0-t4017921/amp/
Flash with TWRP
Health works
Bcs of magisk all my banking works fine (Sparkasse germany)
I LOVE IT
GeekSiddiqi said:
Anything you figure out!
Please do share with me!!!!
Click to expand...
Click to collapse
Beyone Rom 6.7
If you have questions better go to reddit and ask for help
XDA is dead
any update on this issue ?
Xenenon said:
Beyone Rom 6.7
If you have questions better go to reddit and ask for help
XDA is dead
Click to expand...
Click to collapse
But do you lose the Samsung stock camera with this Rom? I have the same exact problem as you. When I was running the Evolution X custom Rom I could connect. But I wasn't happy with the camera that Rom provided. The stock camera on this phone is so amazing and one of the main reasons I bought the phone. I feel cheated when I have to give that up
nasheednashy said:
any update on this issue ?
Click to expand...
Click to collapse
I was having the exact same issue. I just activated magisk hide. And also installed the magisk module, Bluetooth library patcher. Now mine paired up first try. Not sure which helped or if it was a combination of both. But I'm paired up now.
Having same issue too. Tried changing props, tried multi disabler. Tried editing rules.
Now the app can enter but watch not connected
synite said:
Having same issue too. Tried changing props, tried multi disabler. Tried editing rules.
Now the app can enter but watch not connected
Click to expand...
Click to collapse
Did you found a way to connect them?
Inviato dal mio Pixel 3 utilizzando Tapatalk
Hi! Given a Samsung Galaxy Watch Active 2 (LTE) watch and a rooted Galaxy S10 (Android Q). Bluetooth pairing starts but does not end. Two Magisk modules id have been installed but I can't pair them. Is there anything you can bring together? So much for all the stupidity to read, but no answer or stupidity throughout. I can't install Viper4android on the same phone under Android 10. Magisk 21.4, but the 2.7 Viper doesn’t go up. It is installed by plugin, but not among applications. Can these be solved somehow? There was no problem under Android 9. Unfortunately, for the latest Android Q version, XEH version November 27, 2020, TWRP is not trable either. I download the right version, with Magisk, I boot into the AP with Odin, then start button, and odin closes immediately. Nothing goes on this ****ty Android Q. I am waiting for help together or separately! Thanks!
Any update on this issue?
I have problem pairing my Galaxy S21 Ultra and Galaxy Watch Active 2.
No pairing issues before rooting (stock firmware). After rooting using both stable Magisk V22 and Canary 22005, it stuck on Finalizing Pairing screen. I also noticed that the Bluetooth and Samsung accessory icons briefly shown on the notification bar (appear part of the screen) and then disappear.
I hope someone has solution to this.
hello everyone.
i have tried a few custom roms on my samsung galaxy grand prime sm-g530H and discovered the rom that works best with it for me is this version of resurrection remix - https://forum.xda-developers.com/gr...om-resurrection-remix-n-5-8-3-galaxy-t3596669.
the problem is its preloaded with magisk management. even after uninstalling magisk through twrp, i am not able to run some important indian apps (eg - m-adhaar) because they still detect my phone as rooted. i have already tried unrooting but that didnt work. magisk is not able to hide root from some apps that i need through magisk hide and other methods i have read about on this site either.
can some kind soul please provide me a link of a root-free rom of resurrection remix or regular lineage os? preferably android version 7 and/or 8? thank you in advance.
my phone specs :-
samsung galaxy grand prime
sm-g530h - A.P - XXS2BRLI
CP - XXU2BPB2
MSM - 8916
p.s - i changed the update script in the roms to install from boot without magisk but of course it still installs the magisk management.:cyclops:
also - magisk hide is not working for one particular app- https://play.google.com/store/apps/details?id=in.gov.uidai.mAadhaarPlus
HI,
These Apps have problem with the custom rom too ( normally) and they are able to recognize the custom rom in both case. It doesn't matter rom is rooted or not.
So You have to hide this thing with Magisk or ... .
Is your magisk passed the safety net test successfully?
If it passed then I can't help you anymore and if not try this one:
https://forum.xda-developers.com/gr...om-lineageos-17-0-galaxy-grand-prime-t4034919
yes
Feoder said:
HI,
These Apps have problem with the custom rom too ( normally) and they are able to recognize the custom rom in both case. It doesn't matter rom is rooted or not.
So You have to hide this thing with Magisk or ... .
Is your magisk passed the safety net test successfully?
If it passed then I can't help you anymore and if not try this one:
https://forum.xda-developers.com/gr...om-lineageos-17-0-galaxy-grand-prime-t4034919
Click to expand...
Click to collapse
actuall yes. thats the last rom i tried. but its not stable on my phone. display keeps turning off and phone becomes laggy too. which is why i have mentioned that i need version 7 or 8 n particular.
as for your mention of these apps having problems with custom roms, i am not sure if thats entirely correct or not because i have tried other roms which are fine with the apps but not stable for my phone in particular. so theres my dilemma.
as for magisk test...yes. it passes but hiding is not working in 1 particular app. also my requirement is non magisk and/or non superuser preinstalled rom if i can find one. maybe you could help me with that? as long as the version is 7 or 8.1? coz 9 and 10 are not running properly on my phone ( lags). i am kind of limited in using internet for a couple of days...so its hard to thoroughly search for one. which is why this thread.t hank you for your reply and help
maxdesolate said:
which is why i have mentioned that i need version 7 or 8 n particular.
Click to expand...
Click to collapse
https://forum.xda-developers.com/gr...fficial-galaxy-grand-prime-g530h-xcu-t3765599
I tried a few Oreo based custom roms and this is the only stable rom that I found in internet . Which is a really great rom but it doesn't work for you because Rom will be rooted during the installation by Magisk 16.3.
I don't have any informations about 7, If You have Telegram Account , There is a Grand Prime 530 group. May be you can get a better help there about Android 7.
GP link: https://t.me/grandprimedev
Feoder said:
https://forum.xda-developers.com/gr...fficial-galaxy-grand-prime-g530h-xcu-t3765599
I tried a few Oreo based custom roms and this is the only stable rom that I found in internet . Which is a really great rom but it doesn't work for you because Rom will be rooted during the installation by Magisk 16.3.
I don't have any informations about 7, If You have Telegram Account , There is a Grand Prime 530 group. May be you can get a better help there about Android 7.
GP link: https://t.me/grandprimedev
Click to expand...
Click to collapse
thanks a bunch bro. i have tried this already though. along with magisk, it has some issues like powering off instead of restarting and a little bit of heating - at least on my phone - if i remember right. anyway i will check out the group after creating an account on telegram. only 1.5gb of usage left today on my phone. thanks again. much appreciate it. :angel:
try this one:
https://forum.xda-developers.com/gr...om-lineageos-17-0-galaxy-grand-prime-t4034919[/QUOTE]
hi bro.
after a lot of frustration, i tried this one again with bitgapps. turns out that the other versions of gapps were making it lag. its running nicely on my phone. it didnt have magisk installed or supersu for that matter. but some apps still showing that 'you are on a rooted device' or' you are using a custom rom' msg.
so i installed magisk again only to be able to surpass detction for the one particular app i needed and it worked ( yippy!). but other apps, for eg - whatsapp etc still detect the device as custom rom or rooted. so i am still looking for a way around it.
also particular rom shows the msg on startup saying -' there is an internal problem with your device. contact your manufacturer etc. am just ignoring the pop up msg for now.
the rom ( which is android version 10 ) is running surprisingly smooth and fast though.
i wish there was a way to get rid of that msg and unroot the device completely ( doing it through superuser pro and magisk unintsallation - with uninstaller zip and through manager didnt work).
so well, there it is.
As do i
maxdesolate said:
also particular rom shows the msg on startup saying -' there is an internal problem with your device. contact your manufacturer etc. am just ignoring the pop up msg for now.
Click to expand...
Click to collapse
I saw it on most Android Pie and Q custom roms which i tried. I think it's something about kernel or Rom. There is a video on YouTube about this issue, He solve it for an Asus phone which didn't work for me.
For the record, did you hide Magisk manager and chose a nick name for it before hide root from other apps with it?
yup. i did.
Feoder said:
I saw it on most Android Pie and Q custom roms which i tried. I think it's something about kernel or Rom. There is a video on YouTube about this issue, He solve it for an Asus phone which didn't work for me.
For the record, did you hide Magisk manager and chose a nick name for it before hide root from other apps with it?
Click to expand...
Click to collapse
i did hide magisk and gave it another name and checked all apps to be hidden in the hide list.
this video you mention, is it the one where he sets ro.treble to false from true? if yes, then i downloaded build prop but my ro.treble was already set to false by default. i was really hoping that would work. lol. alas! let me know bro.:good:
maxdesolate said:
this video you mention, is it the one where he sets ro.treble to false from true?
Click to expand...
Click to collapse
Yes
I don't know this is useful for you or not . By the way it's an other stable custom rom . ( Oreo based ) with 2 small bug but on safety test, CTS profile result was false for me.
https://forum.xda-developers.com/grand-prime/development/rom-dotos-2-2-t3791808
maxdesolate said:
i did hide magisk and gave it another name and checked all apps to be hidden in the hide list.
this video you mention, is it the one where he sets ro.treble to false from true? if yes, then i downloaded build prop but my ro.treble was already set to false by default. i was really hoping that would work. lol. alas! let me know bro.:good:
Click to expand...
Click to collapse
Feoder said:
I saw it on most Android Pie and Q custom roms which i tried. I think it's something about kernel or Rom. There is a video on YouTube about this issue, He solve it for an Asus phone which didn't work for me.
For the record, did you hide Magisk manager and chose a nick name for it before hide root from other apps with it?
Click to expand...
Click to collapse
I just realized that my phone model is fortunave3g not fortuna3g . It is a long story that why I made this mistake but since there is no official Twrp for fortunave3g I installed the Pitch Black Recovery for fortunave3g then I flashed a Lineage 17.1 for fortunave3g with it. now everything is fine and I don't see the internal problem's notification any more . Also I should thanks itexpert.120 for helping and his custom recovery.
should i try pitch black ?
Feoder said:
I just realized that my phone model is fortunave3g not fortuna3g . It is a long story that why I made this mistake but since there is no official Twrp for fortunave3g I installed the Pitch Black Recovery for fortunave3g then I flashed a Lineage 17.1 for fortunave3g with it. now everything is fine and I don't see the internal problem's notification any more . Also I should thanks itexpert.120 for helping and his custom recovery.
Click to expand...
Click to collapse
ah, i see. i used to get error 7 on the latest twrp even after editng the updater script. so i switched to twrp version 3.2.x. then there were no errors while flashing any roms. do you think changing the twrp version or doing it again through pitch black recovery might solve the issue for me? also, please tell me if pitch black is as good as twrp in backing up and restoring. coz i have had to do that a lot. zeeshan(itexpert.120) told me to just ignore the error. hehe. but i cant do that!:cyclops: let me know bro.
maxdesolate said:
ah, i see. i used to get error 7 on the latest twrp even after editng the updater script. so i switched to twrp version 3.2.x. then there were no errors while flashing any roms. do you think changing the twrp version or doing it again through pitch black recovery might solve the issue for me? also, please tell me if pitch black is as good as twrp in backing up and restoring. coz i have had to do that a lot. zeeshan(itexpert.120) told me to just ignore the error. hehe. but i cant do that!:cyclops: let me know bro.
Click to expand...
Click to collapse
Actually the main problem was with my rom not custom recovery . But I had to install a correct custom recovery for installing the correct custom rom.
Pitch Black has the same features even more. Actually It based on Twrp.
I can't be sure, but if you've seen Error Seven when you using the Twrp 3.4 , then there is a good chance that you've installed a wrong Custom recovery. on the other hand I had camera problem which seems you don't have it.