Hey,
I tried to figure this out for days. Seems like this phone dosent have a2dp, and that sucks. Is it possible to "enable" it ?? Is there a cab file or something, cause its "just" a profil ??
thanks
use this A2DP Toggle 1.1
The A2DP toggle app looks quite useful, I agree, but in any case I have been using BT stereo headphones with my 614c without any third party software.
Assuming you have paired your A2DP headphones or speakers with the phone, you can just use them out of the box.
If the A2DP connection is not made automatically, go into Bluetooth Settings, long-click on the A2DP device and click "Set as Wireless Stereo".
Hey,
thanks for responding. I have paired it and it works, but with distortion. thats why i figured out the a2dp thing (im just startet with the wireless sound )
But i still have distortion when i listen to music. Everything works but its bad sound.
Any help ??
Yes, I think I have had this problem myself.
You can try changing the gain setting. Go to Settings > System > Audio > Mic. Ensure that "Enable AGC" is not set. AGC stands for Automatic Gain Control. Move the slider to one end, perform a test of your wireless headphones, then move the slider to the other end, perform another test.
On my phone, the slider is set at "position 4" (where MAX = position 1).
You may need to reboot your phone between tests.
2inzane4u said:
Hey,
thanks for responding. I have paired it and it works, but with distortion. thats why i figured out the a2dp thing (im just startet with the wireless sound )
But i still have distortion when i listen to music. Everything works but its bad sound.
Any help ??
Click to expand...
Click to collapse
Hi,
U can't get stereo sound out of a mono system without distortion.
Dirk
Is this possible? Is it possible with a registry setting? An automatic activation of the audio booster when I plug in a headphone.
(and for that matter, stay activated when i skip through a bunch of cd's. Because I think it is buggy also...)
Hello
I had a question about the HiFi Dac.
My M50X is low impedance (30s) so it only activates "Normal audio device" when i enable HiFi Audio
but, if i disconnect the cable from my headphone and only plug the cable into the phone, it turns on "External Audio Device" setting of the HiFi Dac instead of saying "normal audio device" and is definitely louder!
Is there any difference between this external audio device (aux) mode and High Impedance mode?
dkimmortal said:
Hello
I had a question about the HiFi Dac.
My M50X is low impedance (30s) so it only activates "Normal audio device" when i enable HiFi Audio
but, if i disconnect the cable from my headphone and only plug the cable into the phone, it turns on "External Audio Device" setting of the HiFi Dac instead of saying "normal audio device" and is definitely louder!
Is there any difference between this external audio device (aux) mode and High Impedance mode?
Click to expand...
Click to collapse
This methode working well:
https://forum.xda-developers.com/v20/how-to/lg-v20-highgain-trick-root-easily-t3548890
I got the Oreo update and in developer options you're supposed to be able to change the codec, samplerate and a few other things to improve Bluetooth audio. However when I select a codec it doesn't change. It defaults to aac. I wanted to use Ldac. Tried aptx hd and Samsung hd as well and they don't work.
I have the same issue. When you select for example, AptX, the settings don't seem to stick.
Any suggestions? Thanks!
Same here on S9+ cant change codec, always goes back to AAC
jUsT2eXy said:
I have the same issue. When you select for example, AptX, the settings don't seem to stick.
Any suggestions? Thanks!
Click to expand...
Click to collapse
Try deactivating Bluetooth, then change the codec. Should work. Cheers
Which codec is best? AAC was my default.
Sent from my SM-G965F using Tapatalk
Apt-X is the best. That being said, the bluetooth device you connect too has to be compatible. Maybe that's why it switches back to AAC for you. (It sticks to apt X in my case)
Same problem here, it doesn't seem to stick. Even if I disable bluetooth. After closing and re-opening developer options it reverts back to SBC.
Any fix?
For me it only changed when a device was actually connected
Mine does not stay after I change it, it goes back to SBC.
Yo, everyone. I use a sennheiser gt 4.40 with aptx with s8. If you want to enable aptx. first go to BLUETOOTH settings, click the 3 dots. disable the duo bluetooth audio and then go to the developer settings, you will see it's working. but to be honest, I find no difference between these. LOL
Cheers
starfishhaha said:
Yo, everyone. I use a sennheiser gt 4.40 with aptx with s8. If you want to enable aptx. first go to BLUETOOTH settings, click the 3 dots. disable the duo bluetooth audio and then go to the developer settings, you will see it's working. but to be honest, I find no difference between these. LOL
Cheers
Click to expand...
Click to collapse
Finally! Disabling dul audio is what allows the setting to work on my Note 8. Using Forza Metallo headphones there is a VERY noticeable improvement when using aptx!
The audio codec is switching back from LDAC because your bluetooth headphones/speaker doesnt support LDAC. Same would be the case with APTX HD.
starfishhaha said:
Yo, everyone. I use a sennheiser gt 4.40 with aptx with s8. If you want to enable aptx. first go to BLUETOOTH settings, click the 3 dots. disable the duo bluetooth audio and then go to the developer settings, you will see it's working. but to be honest, I find no difference between these. LOL
Cheers
Click to expand...
Click to collapse
My problem is my stereo in my car is older and needs to use the SBC codec to stay connected with any reliability, but the phone automatically switches back to AAC when it connects to it. If I switch it back to SBC after it connects I have no connectivity issues but if I leave it on AAC it disconnects every 5 mins, won't display some track information, etc.
Duo bluetooth audio is not enabled, I have changed settings with both bluetooth and duo audio off. It will accept the change to SBC, but it reverts back to AAC when the stereo connects. The phone will not accept any change to any other bluetooth developer option either, when I exit the developer options and go back in they all are reverted back from my changes. Quite frustrating.
starfishhaha said:
Yo, everyone. I use a sennheiser gt 4.40 with aptx with s8. If you want to enable aptx. first go to BLUETOOTH settings, click the 3 dots. disable the duo bluetooth audio and then go to the developer settings, you will see it's working. but to be honest, I find no difference between these. LOL
Cheers
Click to expand...
Click to collapse
Just logged cause of this solution, thank you comrade, this solved the issue.
on the s9 plus u can only change to profiles whilst playing sound through the bluetooth headphones and only codecs the headphones support. when you re-pair it will auto select the best codec the headphones support anyway so no need to change it at all. i would leave this setting alone unless you want to dowbscale the codec (as it picks the best one for your bluetooth device)
Codec change on S8 does not stick
I have tried the dual audio status trick mentioned above for Note 8, but it doesn't work for my S8. I can select AptX in the developers section, but when you return to that section, the codec selected reverts to SBC. I have a pair of earbuds that supports AptX. Is Samsung pulling a fast one on us?
frankfrank1 said:
I have tried the dual audio status trick mentioned above for Note 8, but it doesn't work for my S8. I can select AptX in the developers section, but when you return to that section, the codec selected reverts to SBC. I have a pair of earbuds that supports AptX. Is Samsung pulling a fast one on us?
Click to expand...
Click to collapse
Worked for my s8. I am using it with a fiio q5. Aptx sticks after duo audio disable.
My S7 kept reverting back to aptx after I used LDAC With mij Sony 1000mx2.
There is an extra setting in the bluetooth settings for that headphone (tap the little)cog) to enable LDAC.
Switching that on worked for me.
where is this setting Dul Audio?
Sennheiser aptX HD
Hi all,
I can choose all the settings in my Umidigi A1 Pro but when connecting BT settings go back to default SBC. Android 8.1 has as far as I can see no more 3 dots or dual playback.
Default:
avrcp 1.4
sbc codec
44.1 khz
16 bit
stereo
ldac default=best