Hello.
I have the note 3 N9005 on android 4.4.2 rooted with custom recovery.
I would like to know which kernel is suited to overclock the gpu. That is my only goal of wanting to use a custom kernel and i have never used one before.
Help is appreciated as i am a new note 3 user.
Try CivZ-KK_Xplorer-Rev1.9
Related
Is it possible to control kernel frequencies with a stock rom and kernel with root privileges?
My S4 is on MJ7. I want to control the minimum frequency the processor clocks down to. I feel its too low and causes the phone to stutter for a moment before increasing. Will the kernel and rom allow me to do that once I have root privileges?
Also, as I understand, ME7 and MI1 can't flash custom kernels. Is that correct?
Finally, I understand the G2 has loki to get around its bootloader. Can you flash custom kernels on that? I would be getting a Verizon Wireless model.
After two years with a galaxy nexus, I now see how bad the situation has become for modders on AT&T/VZW.
Thanks for your help
Hi.
I am pretty new to android and I just decided to root my S3 neo running 4.4.2 android version because I couldnt
Find any other way to get hearhstone running on it. And of course now, after rooting I want to try custom software
To improve my galaxy's performance.
Any tips/links?
You can try Rox' cyanogenmod 12 or BlissPop. I think Bliss is better because of the customization and the fact that you can tweak your CPU/GPU frequency.
A link to Bliss: http://forum.xda-developers.com/galaxy-s3-neo/development/rom-t3019822
Hi, I have a Samsung Galaxy Note 3 N9005.
I installed a custom recovery and rom 2 days ago, first rom being phronesis 2.0 rom.
From there I tried overclocking my device but all apps show me 2.26ghz is the max my device can go, apps used include: kernal auditor, setcpu, trickster mod and no frills cpu control.
I searched the forums a bit and so I thought flashing a new kernel would help. I flashed Arter97s kernel and it still didn't allow me to overclock higher than 2.26 ghz, then I tried audax's kernel with no luck.
Then today I moved on to Tesla 5.1.1 Rom, and I still cannot overclock higher
I yet again reflashed arter97s kernel and still I am having no luck.
Any help?
Thanks
owner eod
This is the limitation of the kernel. It provides the frequencies it supports, so you need a kernel with OC support. I do not OC, so sorry, no clue which to take which even is allowed to talk about here. ShinTo was supporting it AFAIK, but they had to leave due to not providing the source and thus violating the GPL.
Overclock
emuandco said:
This is the limitation of the kernel. It provides the frequencies it supports, so you need a kernel with OC support. I do not OC, so sorry, no clue which to take which even is allowed to talk about here. ShinTo was supporting it AFAIK, but they had to leave due to not providing the source and thus violating the GPL.
Click to expand...
Click to collapse
I am able to overclock my 9005 up to 2.7GHz with mentioned apps. I am not sure which kernal I am using. I have Phronesis 5.0 on and am getting ready to flash 5.2. The only shlep is that I need to set the frequency after each reboot. I wish this could be included in a kernal.
Try using leankernel: http://forum.xda-developers.com/showthread.php?t=2488082 I had same kind of problem then I flashed this and used kernel auditor. Now everything works perfectly!
Can't Flash Kernel on note 3 sm-n900
I have been looking for solution at multiple sites. Hope to get answer here. I have downloaded a stock rom lollipop for my note 3 sm-n900.
I was successful at overclocking it to 2.1ghz but i want it to be at 2.7ghz and the current kernel does not support it.
I tried flashing three different kernels lk-hltemo 6..., lk-hlte v6 and lk-hlteu 6... using CWM and TWRP but kernel didn't flash.
Somebody pleaseeeee helppppp....
Read the thread .
But if you dont know what you are doing you will brick your phone .
Hello all!
I want to root my Note 4 so I could remove bloatware, earphone volume restriction, wakelocks, etc and use a custom ROM but, reading at the forum, it looks like somethings are different now since I last rooted a phone( LG G2). Can you guys help me with some question?
1- I have a Galaxy Note 4 910C with 5.1.1 stock rom installed. What kernel( I don't want anything special here, only an good overall perfomance and battery life) do you guys think I should use since now a custom kernel is must for rooting?
2 - I'm also looking into using DN5 or Sixperience custom ROM and I always see people talking about new bootloader and modem. What are those?
3 - Is anything else I should know before rooting( custom kernel -> TWRP for recovery - Custom ROM)?
Thx in advance
Hasmodye said:
Hello all!
I want to root my Note 4 so I could remove bloatware, earphone volume restriction, wakelocks, etc and use a custom ROM but, reading at the forum, it looks like somethings are different now since I last rooted a phone( LG G2). Can you guys help me with some question?
1- I have a Galaxy Note 4 910C with 5.1.1 stock rom installed. What kernel( I don't want anything special here, only an good overall perfomance and battery life) do you guys think I should use since now a custom kernel is must for rooting?
2 - I'm also looking into using DN5 or Sixperience custom ROM and I always see people talking about new bootloader and modem. What are those?
3 - Is anything else I should know before rooting( custom kernel -> TWRP for recovery - Custom ROM)?
Thx in advance
Click to expand...
Click to collapse
1-2. If you need all the functions of the phone then stock kernel is best as some of it don't work right on custom kernels unless the developer of the custom rom has done something about it when changing the stock kernel for a custom. "Welcome to TW roms" Compared to other manufactures its a pain in the beep to use Sammy's TW but I do love the whole spen feature.
I don't have a C so cant tell you much about there battery life but a solid rom on stock kernel can be very good and mix it with what ever app you use to freeze apps and its good. I use 3c toolbox "paid version" the best app ever.
Bootloaders and modems must match the rom version you want to flash or you will end up in bootloops so example if you want coi3 based rom then bootloader and modem must be coi3 as well or it wont work. in odin BL = bootloader and CP = modem.
3. use odin to flash the recovery and rooting I cannot remember as I did that only once which was a few weeks after note 4 was released so much could have changed since that.
So I'm very New to all this andriodnrom flashing and what not I currently have cm,11 installed I got no frills I got every program to backbup n what not ROM manager, Titanium Pro you name it. So I am having battery problems and I feel like the phone could run smoother I have a Samsung sgh i337M I am looking for help on installing the best ROM for my phone preferably CM cause I want performance/battery life, stability and customization. Any help appreciated my current ROM only has noop cfq and row as I/o schedulers which isn't that good if I'm not mistaken but idk any help on my min and max CPU I should have set any help appreciated ty ty
You would install cm12.1 and any other custom ROM the same way you install cm11. You'll probably have to update to the latest recovery, modem, and bootloader in order to flash and user newer ROMs.
A custom kernel can help extend battery life.