Related
Hello,
I recently upgraded my Huawei Nexus 6P to 6.0.1 (dirty-flash, sideloaded).
I had trouble getting LTE to work at first (turning on/off Airplane Mode makes LTE work). I kept trying to change Field Test settings to make LTE work.
However, when I factory reset it the phone won't make or receive phone calls.
It sticks on "dialing..." and it just won't work. However, data and messaging work just fine.
I forgot to back up my EFS partition so it's partially my fault.
My IMEI number and MEID show correctly, however on the My Verizon website it shows a different MEID that's nothing close to the original one. The last 2 digits were different. Neither the MEID or IMEI were changed during the upgrade process, so it should have worked fine.
I recently called Verizon Tech Support about this and they said they'd change the MEID within 72 hours to 4 days. (I called Friday evening)
They kept having issues with the server rejecting the MEID and I checked, it's not blacklisted. They told me about a "wrong form" being filled out and ran some tests and nothing worked.
The phone MEID and Field Test menus showed properly though, just calling any other number (even Verizon's activation number) won't work.
I kept factory resetting, even downgraded to 6.0 (clean flash with recovery/radios, unrooting and all that), and LTE worked better, but STILL no phone calls!
Whenever I try to activate it on the website, it keeps telling me to contact their number. I'm not sure if I'll need a new SIM card because I've tried another SIM card and will also not make calls.
I'm not sure if calling has to do with the MEID or IMEI or anything else.
Do you have any tips/suggestions to fix this annoying issue?
Thank you,
Exec360
I've seen the issue going from Wireless to LTE and vice versa but I have no issue making or receiving calls. Texting and MMS work ok also. I went from 6.0 to 6.1 by doing a factory image flash. Now I'm Chroma and I'm curious if I would have this same issue on Stock so I will probably flash factory or a slim rom stock tonight. I'm on Verizon and had a nexus 6, I popped the sim in my 6p and it activated with no issue.
rsalas187 said:
I'm on Verizon and had a nexus 6, I popped the sim in my 6p and it activated with no issue.
Click to expand...
Click to collapse
Same here, except I popped out the SIM from my iPhone 5S.
Ironically, when I put the same SIM back into the 5S, calling and voicemail, in addition to data worked, even though the device was recently deactivated from Verizon.
I'd say the issue probably comes up from a corrupted IMEI/MEID or other identifier. (Not completely sure about this though — the IMEI/MEID was the same between popping in the SIM for the first time and after resetting...)
Verizon detected my device as a Huawei 1511 phone and thinks it's an old Samsung feature phone when I run it through support/help pages.
I have the exact same problem with my phone and I don't know what to do.
update: I just flashed the efs backup file and it worked again.
I forgot to back up my EFS partition and I had 2 chances to do so...
My IMEI, MEID and SIM ID show perfectly in the About section, even when factory reset and bootloader locked, but calls still don't work, very odd.
I used Wugfresh and just about every IMEI recovery tool I could find (EFS Professional) but it keeps giving me errors such as "Access Denied..." with BusyBox installed.
Still no email or response from Verizon techs tonight, expecting one tomorrow.
If not, I'll have to RMA.
More specifically, I cannot find an EFS folder or a nv_data.bin file in any file explorer — Root Explorer, Solid Explorer, TWRP, etc.
Alright, I've actually figured out that the problem is NOT the EFS after I sent it in to Verizon.
My IMEI and MEID number and everything else were actually just fine.
It wasn't flashing or anything that ruined my phone... I recently called Verizon one night on my phone about LTE issues on 6.0.1 and after that, the calls just stopped.
In fact, the problem IS on their end.
They gave me a new SIM card and it didn't work. They realized the phone was new on the network and that would cause incompatibility issues.
Now I have to ship my phone to their IT department which takes about 2 weeks.
If that is your case:
Verizon guide to getting your calling back:
First, I'd try flashing an old EFS backup when your phone was working. If that doesn't work, call their support number (1-800-922-0204) and select the tech support option or say it if it asks.
Give them your SIM card number to try activating the phone. If that doesn't work, you can still send in your phone — just ask them and a phone kit will ship.
Sending it in to the IT department will take around 1-2 weeks, so you should definitely have a backup phone or communication device on hand (you can also just use Google Voice from a PC which is a great temporary solution).
I'll say, BIG props to Verizon for giving us very good support.
Exec360 said:
Alright, I've actually figured out that the problem is NOT the EFS after I sent it in to Verizon.
My IMEI and MEID number and everything else were actually just fine.
It wasn't flashing or anything that ruined my phone... I recently called Verizon one night on my phone about LTE issues on 6.0.1 and after that, the calls just stopped.
In fact, the problem IS on their end.
They gave me a new SIM card and it didn't work. They realized the phone was new on the network and that would cause incompatibility issues.
Now I have to ship my phone to their IT department which takes about 2 weeks.
If that is your case:
Verizon guide to getting your calling back:
First, I'd try flashing an old EFS backup when your phone was working. If that doesn't work, call their support number (1-800-922-0204) and select the tech support option or say it if it asks.
Give them your SIM card number to try activating the phone. If that doesn't work, you can still send in your phone — just ask them and a phone kit will ship.
Sending it in to the IT department will take around 1-2 weeks, so you should definitely have a backup phone or communication device on hand (you can also just use Google Voice from a PC which is a great temporary solution).
I'll say, BIG props to Verizon for giving us very good support.
Click to expand...
Click to collapse
AN easier method is to use any Verizon phone with a microSIM and activate on their network.
Once the SIM is active, cut it down to a nanoSIM and put it into the Nexus 6P.
It just works. All this about sending your new phone to them for two weeks is crazy.
I pulled the SIM from my LG G3 and cut it. Up and running in minutes.
tech_head said:
AN easier method is to use any Verizon phone with a microSIM and activate on their network.
Once the SIM is active, cut it down to a nanoSIM and put it into the Nexus 6P.
It just works. All this about sending your new phone to them for two weeks is crazy.
I pulled the SIM from my LG G3 and cut it. Up and running in minutes.
Click to expand...
Click to collapse
Unfortunately, my other phone does not have a microSIM. NanoSIMs usually work with LTE connections.
Trimming a microSIM is dangerous and could actually damage your SIM card tray and your phone.
Thank you for the advice, but I should warn you taking that risk may actually damage or cause issues with the SIM card itself such as not being able to read its SIM card number.
EDIT:
After 5 days, 3 factory resets, and many flashes of the older radio, it has been SOLVED!!!!!
First, try disabling, reinstalling the factory version of Google Connectivity Services, then updating it in the Google Play Store.
Next, dial *#*#4636#*#* on your phone application to get to field test mode. This function will work no matter whether the phone is working or not — it's just an information screen.
Click the 3 dots and select "change radio band". Select Radio Band 6, NOT USA or Radio Band 7 — Verizon told me to try both of those and they are glitchy.
Source: "Attaching 2 screenshots. One with band 6 where calling works but data is 1x. Another with USA band where LTE data works but no calling. Looking closely it's set to emergency calls only." (http://forum.xda-developers.com/showpost.php?p=64149076&postcount=8)
Now my GSM service is working and calls work extremely well!
Glad it had nothing to do with EFS/IMEI numbers after all.
Make sure to set your APN to "VZWINTERNET" if it hasn't been set already.
I'm glad I can share this with XDADevelopers so that they can benefit from this information.
- Exec360
Exec360 said:
EDIT:
After 5 days, 3 factory resets, and many flashes of the older radio, it has been SOLVED!!!!!
First, try disabling, reinstalling the factory version of Google Connectivity Services, then updating it in the Google Play Store.
Next, dial *#*#4636#*#* on your phone application to get to field test mode. This function will work no matter whether the phone is working or not — it's just an information screen.
Click the 3 dots and select "change radio band". Select Radio Band 6, NOT USA or Radio Band 7 — Verizon told me to try both of those and they are glitchy.
Source: "Attaching 2 screenshots. One with band 6 where calling works but data is 1x. Another with USA band where LTE data works but no calling. Looking closely it's set to emergency calls only." (http://forum.xda-developers.com/showpost.php?p=64149076&postcount=8)
Now my GSM service is working and calls work extremely well!
Glad it had nothing to do with EFS/IMEI numbers after all.
Make sure to set your APN to "VZWINTERNET" if it hasn't been set already.
I'm glad I can share this with XDADevelopers so that they can benefit from this information.
- Exec360
Click to expand...
Click to collapse
I have the same issue with model h1511 and i bought the phone from Ebay but im living in Qatar .. i dunno what to do .. LTE data connection working fine .. sending and receiving sms is working ok .. only I can't make or receive calls. i'm not sure to whom I should report this issue
Exec360 said:
EDIT:
After 5 days, 3 factory resets, and many flashes of the older radio, it has been SOLVED!!!!!
First, try disabling, reinstalling the factory version of Google Connectivity Services, then updating it in the Google Play Store.
Next, dial *#*#4636#*#* on your phone application to get to field test mode. This function will work no matter whether the phone is working or not — it's just an information screen.
Click the 3 dots and select "change radio band". Select Radio Band 6, NOT USA or Radio Band 7 — Verizon told me to try both of those and they are glitchy.
Source: "Attaching 2 screenshots. One with band 6 where calling works but data is 1x. Another with USA band where LTE data works but no calling. Looking closely it's set to emergency calls only." (http://forum.xda-developers.com/showpost.php?p=64149076&postcount=8)
Now my GSM service is working and calls work extremely well!
Glad it had nothing to do with EFS/IMEI numbers after all.
Make sure to set your APN to "VZWINTERNET" if it hasn't been set already.
I'm glad I can share this with XDADevelopers so that they can benefit from this information.
- Exec360
Click to expand...
Click to collapse
Where was this thread yesterday when I needed it...lol I was messing with my radios and screwed my phone up. Please not this method may not work on a custom ROM I had to flash back to 6.0.0.
Exec360 said:
EDIT:
After 5 days, 3 factory resets, and many flashes of the older radio, it has been SOLVED!!!!!
First, try disabling, reinstalling the factory version of Google Connectivity Services, then updating it in the Google Play Store.
Next, dial *#*#4636#*#* on your phone application to get to field test mode. This function will work no matter whether the phone is working or not — it's just an information screen.
Click the 3 dots and select "change radio band". Select Radio Band 6, NOT USA or Radio Band 7 — Verizon told me to try both of those and they are glitchy.
Source: "Attaching 2 screenshots. One with band 6 where calling works but data is 1x. Another with USA band where LTE data works but no calling. Looking closely it's set to emergency calls only." (http://forum.xda-developers.com/showpost.php?p=64149076&postcount=8)
Now my GSM service is working and calls work extremely well!
Glad it had nothing to do with EFS/IMEI numbers after all.
Make sure to set your APN to "VZWINTERNET" if it hasn't been set already.
I'm glad I can share this with XDADevelopers so that they can benefit from this information.
- Exec360
Click to expand...
Click to collapse
I have the same issue but I live in Qatar. the thing is that my phone has the exact same issue urs. im glad you could solve it. Can you help me solve mine ??
mohawahba said:
I have the same issue but I live in Qatar. the thing is that my phone has the exact same issue urs. im glad you could solve it. Can you help me solve mine ??
Click to expand...
Click to collapse
In the US, all carriers are supported for Nexus 6P use. Since you live in Qatar, you may have a different carrier.
Here are a few other points or solutions for this issue:
If your carrier is not Verizon, does your carrier whitelist the Nexus 6P or only phones sold through them?
Do you get an IMEI number in the Settings application? (don't put it here for privacy reasons) If you don't, then your issue most likely has to do with accidentally deleting or modifying the EFS partition. Try restoring an EFS backup. ALWAYS back up your EFS before you install something else or root your phone — and keep it in a safe location! Alas, that was not the case for me.
Have you tried turning Roaming on inside your cellular network settings or have a specific roaming plan?
Do you get decent reception when making calls in Qatar? Where do you have this issue most, indoors or outdoors? You should get 1x at least.
Try the field test mode (*#*#4636#*#*) in the phone application. Go to "phone info".
If you see "GSM service: emergency calls only" on Verizon, the GSM band is not connected which makes phone calls. Switch to Band 6.
Otherwise, if you see the same thing for GPRS, try switching to another band. I'm not familiar with carriers except Verizon or other US carriers (AT&T, T-mobile, etc.)
I've emphasized this a lot, but try a factory reset. Lock the bootloader and remove your custom mods to the system. It may just work for you.
The case may be that the phone service does not work in Qatar, your reception is weak, or you have a specific phone plan. It may be your carrier not being compatible with certain bands, like GSM.
If that is the case, try calling their support and ask them for any possible solutions to the problem.
EDIT:
You also stated that you bought your 6P from Ebay. Many risks can come from buying used phones off of there rather than the official websites. It's likely that someone messed with the EFS and IMEI numbers.
It could be a stolen phone too... in those cases, it would be illegal (in some countries, not sure if in Qatar) to change the IMEI number unless you have an EFS backup. Sorry, you may just be out of luck. Try another solution like Google Voice or Skype (paid) for now until you get it fixed.
Thx bro
---------- Post added at 01:13 AM ---------- Previous post was at 01:10 AM ----------
Exec360 said:
In the US, all carriers are supported for Nexus 6P use. Since you live in Qatar, you may have a different carrier.
Here are a few other points or solutions for this issue:
If your carrier is not Verizon, does your carrier whitelist the Nexus 6P or only phones sold through them?
Do you get an IMEI number in the Settings application? (don't put it here for privacy reasons) If you don't, then your issue most likely has to do with accidentally deleting or modifying the EFS partition. Try restoring an EFS backup. ALWAYS back up your EFS before you install something else or root your phone — and keep it in a safe location! Alas, that was not the case for me.
Have you tried turning Roaming on inside your cellular network settings or have a specific roaming plan?
Do you get decent reception when making calls in Qatar? Where do you have this issue most, indoors or outdoors? You should get 1x at least.
Try the field test mode (*#*#4636#*#*) in the phone application. Go to "phone info".
If you see "GSM service: emergency calls only" on Verizon, the GSM band is not connected which makes phone calls. Switch to Band 6.
Otherwise, if you see the same thing for GPRS, try switching to another band. I'm not familiar with carriers except Verizon or other US carriers (AT&T, T-mobile, etc.)
I've emphasized this a lot, but try a factory reset. Lock the bootloader and remove your custom mods to the system. It may just work for you.
The case may be that the phone service does not work in Qatar, your reception is weak, or you have a specific phone plan. It may be your carrier not being compatible with certain bands, like GSM.
If that is the case, try calling their support and ask them for any possible solutions to the problem.
EDIT:
You also stated that you bought your 6P from Ebay. Many risks can come from buying used phones off of there rather than the official websites. It's likely that someone messed with the EFS and IMEI numbers.
It could be a stolen phone too... in those cases, it would be illegal (in some countries, not sure if in Qatar) to change the IMEI number unless you have an EFS backup. Sorry, you may just be out of luck. Try another solution like Google Voice or Skype (paid) for now until you get it fixed.
Click to expand...
Click to collapse
Here in qatar, i have one friend having the same fone from amazon and it is working fine. Here no CDMA plus texting and data are working. If the efs is corrupt or as u say screwed, it would work data and text? Band USA and 6 re ok with data and text.. Band 7 dead.
In general, it may corrupt the phone function but texts/data may work fine.
Most carrier connectivity issues usually come up from a corrupt EFS or the service not being activated on your plan.
http://forums.androidcentral.com/ask-question/423732-understanding-cwm-backups-efs-partition-etc.html
For you, it seems like Band 6 is the correct one. No CDMA — and GSM is working again. Good job
Another method to try:
Update the Preferred Roaming List (PRL) - dial *228 on the phone app or figure out your carrier's PRL update number
That might work, didn't affect my calls since I don't use roaming services.
By "Band 7 dead", do you mean that the service just won't connect? My issue came from messing with the bands to fix the LTE issue and messing up my phone.
Try to call your carrier's support — try getting a new SIM card or collect information about the Nexus 6P compatibility, if they don't have it on their website.
Was the phone working since you first used it? Have you rooted or done any system-level modifications to it? Also is your carrier Verizon, because I don't think they have strong roaming service in Qatar... I am in the USA right now using Band 6, working fine.
https://community.verizonwireless.com/thread/494218
When you dial, do you get "Dialing..." and just have to wait until it hangs up, or is there static, or a carrier message? Does your friend have the same carrier (Verizon) as you do?
Sorry I'm asking so many questions. I just can't quite identify your issue very well.
Exec360 said:
In general, it may corrupt the phone function but texts/data may work fine.
Most carrier connectivity issues usually come up from a corrupt EFS or the service not being activated on your plan.
http://forums.androidcentral.com/ask-question/423732-understanding-cwm-backups-efs-partition-etc.html
For you, it seems like Band 6 is the correct one. No CDMA — and GSM is working again. Good job
Another method to try:
Update the Preferred Roaming List (PRL) - dial *228 on the phone app or figure out your carrier's PRL update number
That might work, didn't affect my calls since I don't use roaming services.
By "Band 7 dead", do you mean that the service just won't connect? My issue came from messing with the bands to fix the LTE issue and messing up my phone.
Try to call your carrier's support — try getting a new SIM card or collect information about the Nexus 6P compatibility, if they don't have it on their website.
Was the phone working since you first used it? Have you rooted or done any system-level modifications to it? Also is your carrier Verizon, because I don't think they have strong roaming service in Qatar... I am in the USA right now using Band 6, working fine.
https://community.verizonwireless.com/thread/494218
When you dial, do you get "Dialing..." and just have to wait until it hangs up, or is there static, or a carrier message? Does your friend have the same carrier (Verizon) as you do?
Sorry I'm asking so many questions. I just can't quite identify your issue very well.
Click to expand...
Click to collapse
Thanks for exerting all kind of possible solutions . really appreciated ... I ll explain next everything ..
First of all I'm no verizon subscriber .. I just got the phone from ebay shipped to qatar .. that's all international buyer ..
well secondly, the service is activated. here is different than yours in activation process. Plus my sim card is working on all other devices, opo, op2, opx, mi redmi n2, moto g ...
I believe the problem remains in the piece I have now (nexus 6p) because im used to buy phones from the US and they work fine expect some missing LTE bands that does not really interfere with calling service.
If the EFS/IMEI is corrupt, will it register on the network normally? will data and text still work?
Band 7 dead means no text no data and surely no calls ... plus when I chose it, i always get called ended right after i press Dial a number
experience with other bands:
band USA: text and data working fine ... calls: when dialing, it keeps dialing until the network fails and returns again like reconnect (the bars disappear and return again) and when i hang up, it respond quickly and execute the action but on,
Band 6: text ok data ok , calls no .. but when dialing, it keeps dialing normally till it gives me (call ended ) and if I try to hang up after few seconds, it freezes the phone for like 10 seconds till it execute the action of hanging up ...
so the USA band is the most responsive band in terms of hanging up ..
when I dial *#4636 .... , and access phone information to change preferred network, it is usually set to LTE/CDMA/GSM (PRL) >> if i try to change it to LTE/GSM (PRL) because no CDMA here, it usually return to the default after restarting the phone .. it does not really change the network if, for example, I choose GSM only .. I still see LTE on the bar .. moreover, when i try to choose 2g from cellular networks from settings, it does not reflect and I still get LTE working .. weird ..
** in all cases, FYI, I always see the carrier name in the top left corner of the screen.
*228 does not work as Im not verizon .. plus any USSDs are not going through as it gives error "connection problem or invalid MMI code"
when I try to access caller ID, it gives error " network or SIM card error".
I tried to call the carrier but they could not do anything. I'm still expecting a call from their back office team who ( i assume ) has more experience
getting a new sim would not help because I have tried different active sims different numbers and I also tried the second carrier here in Qatar (vodafone) and the problem persist.
the fone never worked since i reached Qatar. It was not rooted. I only unlocked BL and flashed the first factory stock rom (fully including the radio), yet nothing
wait wait please don't lose hope
one friend here is also giving me ideas and solutions to get over my isssue, he suggested i flash chroma rom bcz it has more bands. I will flash it and give a feedback.
I really appreciate your efforts and also his efforts @Soulfly3
pardon me if I wrote too many things and for giving all my trials not in order
Thanks
Thanks everyone for helping me resolve my issue. biggest thanks goes to @@scoobysnack who helped me greatly to get over it.
Installing Chroma ROM solved the issue because basically it was a problem of bands. Chroma had more bands that work in Qatar. and I could return back to stock rom again without any problems ( but don't mess up with bands in phone information )
Thanks @Exec360 for offering me your great support >>>
I told you chroma would solve your problems. it has different bands to select and I figured the "AUS" bands would work.
Any advice for those of us operating on Verizon's extended network? I'm using my device on the Appalachian wireless network (with whom Verizon has a network sharing agreement as part of it's LTE in Rural America program), and I'm constantly getting the roaming indicator, even though I know I'm not roaming. I've never dealt with this on any other device, and I've used 4 different devices encompassing both Windows Phone and Android. If I switch the CDMA roaming indicator to "Home", the roaming indicator disappears and the usual LTE indicator appears, but I'm unable to make voice calls. If I switch the roaming indicator to "Automatic", I can make voice calls but the roaming indicator returns and the device tells me I'm roaming inside the test menu, even though Verizon tells me I'm not incurring roaming charges. If that's true, then the roaming indicator is just an annoyance, but it's there constantly (even when on WiFi) and for me it's a significant annoyance. Is there anything I can do, or is this just something I'm going to have to live with?
Hey guys, I just saw a YouTube video that was posted yesterday where the guy shows that after the update he no longer could connect with his Verizon SIM card in the axon 7. Has anybody else run into this? Mine won't be here until Monday but if this is true I'm going to be sorely disappointed. Thanks for your input.
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
I'm really glad to hear that. I'm not so sure the guy knew what he was doing either... Lol :silly:
CaptainElwood said:
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
Click to expand...
Click to collapse
Quick question for you bud. I currently have the Moto Z-Force, but I want an unlocked phone that I can root and mess around with and unfortunately this phone doesn't have that capability. Would you say this is a great alternative in terms of functionality and specs? Tia
CaptainElwood said:
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
Click to expand...
Click to collapse
I second this. No issues on Verizon unlimited plan after update. Always showing roaming also. Mms, sms, calls work as suppose to. All out of the box settings.
Sent from my ZTE A2017U using XDA-Developers mobile app
tolymatev said:
I second this. No issues on Verizon unlimited plan after update. Always showing roaming also. Mms, sms, calls work as suppose to. All out of the box settings.
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
I can third it lol no issues here. Mine actually has better signal after update on verizon and sms/mms everything works still no issues anywhere
My VZW situation. Just an FYI post AND how to fix it.
I'm on Verizon, have had my Axon 7 for over a month now. No issues other than not having VoLTE, and the occasional software farts (Using Nova Launcher now). When I initially set-up my phone, I imported all previous apps directly from the Play Store. I should have known not to install the VZW apps that were previously installed on my HTC One M8 (purchased directly from VZW), but in my excitement for the new phone, it skipped my mind. Anyhow, no issues through 9/19. "Verizon" displayed as my carrier, and full access to the LTE network.
Fast forward to 9/20 (post B27 update) when one of the VZW updated automatically (I don't recall which of the 2 apps I had installed), and BAMM, "123456" displayed as my carrier and no more access to the LTE network (3G only). Later that evening, my VZW account showed my number with an "unauthorized, non-VZW device", whereas, before the VZW app update it showed my HTC one M8. I removed the SIM and shut down the phone, re-installed the SIM and re-booted....nada. Tried what seemed to be every permutation of replacing the SIM card, played around with APN settings...no dice.
My feeling is they booted me off 4G LTE once the app recognized I was using an unauthorized, non-VZW device. The steps below solved the issue (Provided by "vzwcdma" via the ZTE Community Forum).
"As for losing LTE connectivity, I've had a similar problem before, both on the A7 and other devices. On other devices, like Motorola devices, I could just boot into the bootloader and clear the modem state partitions via fastboot, but ZTE seems to have disabled that function in the A7's bootloader. So, for the A7, I had to mess around a bit with the modem mode. Download "Network" or "4G LTE Switch" from the Play Store. Open it and scroll down to "Set preferred network type", where it should say "LTE/GSM/CDMA auto (PRL)". There isn't really a set guide for what you have to do, but try switching into LTE-only mode, try hitting "Turn off radio" and "Turn on radio" (not Airplane Mode), maybe try "LTE/CDMA audo (PRL)", maybe turn off radio, switch to LTE-only mode, turn on radio, etc. At some point (I'm not sure what) the phone will reset its modem state, and should re-connect to Verizon LTE (and when it does, switch the network type back to LTE/GSM/CDMA auto PRL.
My Verizon account also shows "unauthorized, non-VZW device". Shouldn't affect anything. I've been using an unauthorized/non-VZW device prior to the A7 with no issues as well."
roseykr said:
My VZW situation. Just an FYI post AND how to fix it.
I'm on Verizon, have had my Axon 7 for over a month now. No issues other than not having VoLTE, and the occasional software farts (Using Nova Launcher now). When I initially set-up my phone, I imported all previous apps directly from the Play Store. I should have known not to install the VZW apps that were previously installed on my HTC One M8 (purchased directly from VZW), but in my excitement for the new phone, it skipped my mind. Anyhow, no issues through 9/19. "Verizon" displayed as my carrier, and full access to the LTE network.
Fast forward to 9/20 (post B27 update) when one of the VZW updated automatically (I don't recall which of the 2 apps I had installed), and BAMM, "123456" displayed as my carrier and no more access to the LTE network (3G only). Later that evening, my VZW account showed my number with an "unauthorized, non-VZW device", whereas, before the VZW app update it showed my HTC one M8. I removed the SIM and shut down the phone, re-installed the SIM and re-booted....nada. Tried what seemed to be every permutation of replacing the SIM card, played around with APN settings...no dice.
My feeling is they booted me off 4G LTE once the app recognized I was using an unauthorized, non-VZW device. The steps below solved the issue (Provided by "vzwcdma" via the ZTE Community Forum).
"As for losing LTE connectivity, I've had a similar problem before, both on the A7 and other devices. On other devices, like Motorola devices, I could just boot into the bootloader and clear the modem state partitions via fastboot, but ZTE seems to have disabled that function in the A7's bootloader. So, for the A7, I had to mess around a bit with the modem mode. Download "Network" or "4G LTE Switch" from the Play Store. Open it and scroll down to "Set preferred network type", where it should say "LTE/GSM/CDMA auto (PRL)". There isn't really a set guide for what you have to do, but try switching into LTE-only mode, try hitting "Turn off radio" and "Turn on radio" (not Airplane Mode), maybe try "LTE/CDMA audo (PRL)", maybe turn off radio, switch to LTE-only mode, turn on radio, etc. At some point (I'm not sure what) the phone will reset its modem state, and should re-connect to Verizon LTE (and when it does, switch the network type back to LTE/GSM/CDMA auto PRL.
My Verizon account also shows "unauthorized, non-VZW device". Shouldn't affect anything. I've been using an unauthorized/non-VZW device prior to the A7 with no issues as well."
Click to expand...
Click to collapse
Good to know! I've had so many phones and this hardware looks so awesome for the price, but of course vzw isn't gonna play nice with it without some work. Looking forward to getting mine
Verizon still working fine for me.
After the b27 update I saw improved signal strength. I'm on page plus mvno. After driving in a fringe reception area, I lost lte,and I showed as roaming. It seemed to be using boost Mobile from what the phones network menus displayed. Axon doesn't have a mobile network setting for 'system b', only auto & home only. Tried both, rebooting each time, no fix. I ended up resetting phone, fixed it all. I then switched mobile network to home only, and hoping that it's done.
PS-after b27 I had to re-enable a couple settings, pinch for screen shot, etc.
Edit: it's now been several weeks with it set to home network only. I daily drive in fringe reception areas and have better signal strength than ever, with any phone/carrier combo. All is great, no more issues. Great phone!
For reference, I'm on page plus mvno, dropped in my activated sim from my old phone into the right-side sim slot for CDMA services. Then set to home only. Done.
Sent from my Axon 7 using XDA Labs
Just wanted to see if anyone else had inputs of post update Verizon service, good and bad... hasn't been a ton of chatter in the last week. I have a phone on its way from the egg, trying to decide if it's worth starting a new sim card with Verizon and dealing with that work around... is getting the number off a display and ordering online still the easiest way to get activated?
Works great on VZW still. Love the phone.
methcat said:
Just wanted to see if anyone else had inputs of post update Verizon service, good and bad... hasn't been a ton of chatter in the last week. I have a phone on its way from the egg, trying to decide if it's worth starting a new sim card with Verizon and dealing with that work around... is getting the number off a display and ordering online still the easiest way to get activated?
Click to expand...
Click to collapse
I'd say that the Axon works just as well on Verizon as it did prior to the update, but with potentially better signal strength though I didn't really have a big issue with that prior to the update so I'm not sure (the T-Mobile SIM does seem to do a lot better post-update...but Verizon has always worked well).
I really doubt you'll have any substantive trouble with VZW on this device, especially if you're willing and able to mess a bit with some of the more advanced settings just in case a problem does arise. Here are the oddities, and I'm trying to list *all* of them!
1. No VoLTE or (I presume) HD calling
2. Voicemail appears to have to be accessed by dialing *86 as opposed to long-pressing the '1' key
3. Roaming icon is present intermittently
4. Data roaming *must* be enabled to ensure consistent and reliable data service
5. Verizon's website won't recognize the device at all in the Account Overview pages (mine still shows the last "approved" device I had with my VZW SIM - an iPhone 6S)
6. MMS *may* require a hack to get the proper APN, though I've had no trouble with this (I'm prepaid though); the hack requires a GSM SIM, so beware of this
7. 1X reception *seems* a tad weak in terms of dBm but functionally it almost seems better than my other Verizon phones (weird!)
8. Carrier label will be either '123456,' '002127' (EvDO only), or (I think?) '31000' when not using LTE (i.e., 1X or 3G). When on LTE the phone should show "Verizon Wireless" as normal
9. A SIM/modem reset may be necessary once in a great while it seems...so it's good to understand how to navigate to the "Phone Information" screen to toggle radio settings...also, I've found just SIM-cycling with a GSM SIM will often fix any connectivity problems as well...and sometimes just rebooting the phone with no SIM at all can help too (or a combo of all the above!)
If you can tolerate the above issues then the phone is great. I really enjoy it. I've found the Verizon side of things to be pretty reliable on the Axon 7, even with my endless tinkering with radio modes and other stuff, which has seemed to get me into (recoverable) trouble a few times.
Most importantly - the endless chatter on various forums that Verizon "blocks" the Axon 7 and other non-approved devices is total bunk. In every case where I've run into an issue it can be resolved on my side - Verizon is doing nothing whatsoever to inhibit the use of the Axon 7 on its network as far as I can tell (notwithstanding activation hurdles, admittedly)...many of the people making such claims seem to be speaking from a standpoint of total ignorance and it's kind of getting annoying, to be honest...it seems like the minute someone has an issue with the Axon 7, some ignoramus gets on the relevant forums/comments and claims that Verizon is "blocking" the device. Total BS IMO.
Good luck! As far as activation is concerned...I'd say it might be best to just go to Wal-Mart and buy a cheap prepaid phone or something (looks like the HTC Desire 526 has a nano-SIM and is only $37.49 on their website)...or maybe a cheap nano-SIM'd Verizon phone off of Swappa or eBay? That's probably what I'd do...But I know neither of those solutions are particularly helpful...VZW definitely makes it a bit of a pain.
flyer_andy said:
I'd say that the Axon works just as well on Verizon as it did prior to the update, but with potentially better signal strength though I didn't really have a big issue with that prior to the update so I'm not sure (the T-Mobile SIM does seem to do a lot better post-update...but Verizon has always worked well).
I really doubt you'll have any substantive trouble with VZW on this device, especially if you're willing and able to mess a bit with some of the more advanced settings just in case a problem does arise. Here are the oddities, and I'm trying to list *all* of them!
1. No VoLTE or (I presume) HD calling
2. Voicemail appears to have to be accessed by dialing *86 as opposed to long-pressing the '1' key
3. Roaming icon is present intermittently
4. Data roaming *must* be enabled to ensure consistent and reliable data service
5. Verizon's website won't recognize the device at all in the Account Overview pages (mine still shows the last "approved" device I had with my VZW SIM - an iPhone 6S)
6. MMS *may* require a hack to get the proper APN, though I've had no trouble with this (I'm prepaid though); the hack requires a GSM SIM, so beware of this
7. 1X reception *seems* a tad weak in terms of dBm but functionally it almost seems better than my other Verizon phones (weird!)
8. Carrier label will be either '123456,' '002127' (EvDO only), or (I think?) '31000' when not using LTE (i.e., 1X or 3G). When on LTE the phone should show "Verizon Wireless" as normal
9. A SIM/modem reset may be necessary once in a great while it seems...so it's good to understand how to navigate to the "Phone Information" screen to toggle radio settings...also, I've found just SIM-cycling with a GSM SIM will often fix any connectivity problems as well...and sometimes just rebooting the phone with no SIM at all can help too (or a combo of all the above!)
If you can tolerate the above issues then the phone is great. I really enjoy it. I've found the Verizon side of things to be pretty reliable on the Axon 7, even with my endless tinkering with radio modes and other stuff, which has seemed to get me into (recoverable) trouble a few times.
Most importantly - the endless chatter on various forums that Verizon "blocks" the Axon 7 and other non-approved devices is total bunk. In every case where I've run into an issue it can be resolved on my side - Verizon is doing nothing whatsoever to inhibit the use of the Axon 7 on its network as far as I can tell (notwithstanding activation hurdles, admittedly)...many of the people making such claims seem to be speaking from a standpoint of total ignorance and it's kind of getting annoying, to be honest...it seems like the minute someone has an issue with the Axon 7, some ignoramus gets on the relevant forums/comments and claims that Verizon is "blocking" the device. Total BS IMO.
Good luck! As far as activation is concerned...I'd say it might be best to just go to Wal-Mart and buy a cheap prepaid phone or something (looks like the HTC Desire 526 has a nano-SIM and is only $37.49 on their website)...or maybe a cheap nano-SIM'd Verizon phone off of Swappa or eBay? That's probably what I'd do...But I know neither of those solutions are particularly helpful...VZW definitely makes it a bit of a pain.
Click to expand...
Click to collapse
#6 might not need the GSM SIM workaround anymore after the B27 update. The + sign shows up for me all the time now, even if I only have a Verizon SIM inserted.
thanks for the list guys, i think i'll give it a shot. i'm going to try to add it as a second line to my wifes plan online. is borrowing a friends imei from a nano phone still the best way to get a new activated sim for this phone?
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
---------- Post added at 03:42 PM ---------- Previous post was at 03:18 PM ----------
methcat said:
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
Click to expand...
Click to collapse
found this, not sure if this is still the rule...
http://www.prepaidphonenews.com/2016/02/new-policy-may-require-verizon-prepaid.html
"It turns out that Verizon made a policy change effective 1/17/16 that requires Verizon Prepaid Phones to be activated on Verizon Prepaid and have at least $30 in airtime applied to them before they cam be used on Verizon postpaid. A Reddit user posted a copy of an internal Verizon document detailing the new rule:
Effective 1/17/2016, customers who purchase a Prepaid 4G device must activate on a $30, $45, or $60 Prepaid plan and make at least 1 monthly service payment before they are eligible to move the device to a new or active Postpay account .
Device remains locked until first month’s payment is made on their Prepaid plan.
Device is unlocked automatically upon successful first month’s payment and can be used on Postpaid plan (new SIM or SIM swap).
Attempting to use an active Postpay SIM Card with a new 4G LTE Prepaid PIB smartphone prior to making the required monthly payment, hotlines the Postpay MDN (SFO 83643) . The hotline remains until first month’s payment is made.
Customers who activate on the $45 or $60 Prepaid plans and enroll in Auto Pay, receive bonus 1GB data per month.
If account is hotlined:
Data access, outgoing calls, and text messaging do not work.
Text message is sent to smartphone.
*VZW FREE MSG: Phone must be activated on Verizon Wireless Prepaid service and first monthly payment must be made before it can be used with any other service. *
Auto-remark is placed on the customer's account.
*SIM Swap attempted: MDN Hotlined. Phone must be activated on VZW Prepaid service and first month paid before it can be activated as postpaid. *"
methcat said:
thanks for the list guys, i think i'll give it a shot. i'm going to try to add it as a second line to my wifes plan online. is borrowing a friends imei from a nano phone still the best way to get a new activated sim for this phone?
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
---------- Post added at 03:42 PM ---------- Previous post was at 03:18 PM ----------
found this, not sure if this is still the rule...
http://www.prepaidphonenews.com/2016/02/new-policy-may-require-verizon-prepaid.html
"It turns out that Verizon made a policy change effective 1/17/16 that requires Verizon Prepaid Phones to be activated on Verizon Prepaid and have at least $30 in airtime applied to them before they cam be used on Verizon postpaid. A Reddit user posted a copy of an internal Verizon document detailing the new rule:
Effective 1/17/2016, customers who purchase a Prepaid 4G device must activate on a $30, $45, or $60 Prepaid plan and make at least 1 monthly service payment before they are eligible to move the device to a new or active Postpay account .
Device remains locked until first month’s payment is made on their Prepaid plan.
Device is unlocked automatically upon successful first month’s payment and can be used on Postpaid plan (new SIM or SIM swap).
Attempting to use an active Postpay SIM Card with a new 4G LTE Prepaid PIB smartphone prior to making the required monthly payment, hotlines the Postpay MDN (SFO 83643) . The hotline remains until first month’s payment is made.
Customers who activate on the $45 or $60 Prepaid plans and enroll in Auto Pay, receive bonus 1GB data per month.
If account is hotlined:
Data access, outgoing calls, and text messaging do not work.
Text message is sent to smartphone.
*VZW FREE MSG: Phone must be activated on Verizon Wireless Prepaid service and first monthly payment must be made before it can be used with any other service. *
Auto-remark is placed on the customer's account.
*SIM Swap attempted: MDN Hotlined. Phone must be activated on VZW Prepaid service and first month paid before it can be activated as postpaid. *"
Click to expand...
Click to collapse
Dang...yeah I think you're right about this. My mistake...ugh I wish they'd just make it easy! In that case I'd say Swappa would be the best route...I've bought a few phones off of there and it's always been a great experience.
What are your APN settings? I'm having issues getting my data to work on Verizon.
Salmonella lolz said:
What are your APN settings? I'm having issues getting my data to work on Verizon.
Click to expand...
Click to collapse
Mine: http://forum.xda-developers.com/showpost.php?p=68263623&postcount=61
So frustrating. Before update used today Verizon in upper left corner. Switched to 123456 after update. Rebooted and it went back. After another reboot it only says 123456 and nothing I do will change it back. And now when I get an MMS hangouts tells me it needs to download it but nothing happens. I never get LTE anymore either.
Edit: not sure what I did but it's back now. Might have something to do with bearer in apn settings being lte.
KyJelly69 said:
So frustrating. Before update used today Verizon in upper left corner. Switched to 123456 after update. Rebooted and it went back. After another reboot it only says 123456 and nothing I do will change it back. And now when I get an MMS hangouts tells me it needs to download it but nothing happens. I never get LTE anymore either.
Edit: not sure what I did but it's back now. Might have something to do with bearer in apn settings being lte.
Click to expand...
Click to collapse
That's #9 in the above list that was posted. Need to cycle the modem state of the device.
so, can someone help me with a little clarification? did ZTE ever actually disable anything regarding Verizon on this phone? i know when people quote the webinar, it sounded like they were going to. i understand that the functionality is basically all still working, but i'm wondering if maybe i'm confused on the terminology.
in this post on reddit, i heard the same thing that has been repeated by some, and i am wondering if i have my band terminology confused. is the cdma part different from the 4g lte part(and that's why it's still working)?, or is sarah just incorrect?
SarahSchmera 3 points 9 hours ago
Axon 7
Doesn't work on Verizon yet. It supposedly has CDMA radios but the radio firmware has them disabled. ZTE can't by law enable the CDMA radios because they didn't get FCC approval for the CDMA radios. They would have to pay for the testing and then resubmit the device to the FCC to get approval before they turned on the CDMA radios through a software update.
And the device doesn't have the firmware for VoLTE, HD calling or WiFi calling on Verizon.
Click to expand...
Click to collapse
Hi everyone, so I recently purchased an S7 SM-G930V and I'm having some problems with the mobile data connection and was hoping that someone on here might be able to help me out. I've been heavily researching and trying everything I can find online for 2 weeks now trying to figure out why I cannot get this phone to connect to mobile data and I'm about to give up and use it for target practice.
So here's the story:
I bought the phone from a seller on Ebay (I know I know) and it showed up in flawless condition externally and SEEMED to work perfectly. Upon receipt of the phone, I noticed that my current simcard wouldn't fit so I took the phone to verizon to get the nano sim and have it activated. The guy put the sim in and booted it up but after about 15 min the phone was still saying that it was "activating" so (being in a hurry) I told him that I'd just let it activate and be on my way. About an hour later my phone chimed saying that activation was complete but I noticed that it was showing H+R for a data connection which I believe meant I was roaming? Anyway I didn't think much of it because I was in a pretty rural spot in Alaska and the service was spotty.
Now here is where the problems started. Once I got home I noticed that the phone was not picking up any 4G LTE data at all and was bouncing back and forth between 3g and 1x but wasn't actually connecting to them, just finding them (greyed out). I rebooted the phone to see if maybe it just needed to update the local towers or something but it still would not connect to any mobile data at all so I took it back to the verizon store and they swapped the sim for a new one. Now, the phone will not activate AT ALL. The guy tried 3 different sim cards and nothing. It shows fully connected (5 signal bars) for voice but just cycles randomly between 3g and 1x data and will not connect to them let alone even find 4g lte service. When it connects to the towers it shows Verizon Wireless as the connected carrier but since it can't connect to data, it won't activate. The guy finally told me to call tech support and after about 3 hours on the phone with them, they pretty much told me they don't know what's wrong and to get a new phone.
So I decided to hit the internet and try out every option I could find before just sending the phone back. However, after countless hours of tinkering with the phone including rooting the phone, updating the firmware, factory resetting multiple times, clearing cache, disabling the cell radio and changing settings in build.prop, default.prop, apns_config.xml etc etc and getting nowhere I am stuck. I was really hoping that this was just a software issue or APN/modem/radio band etc issue that I could fix but it's looking like it might be a hardware problem or it's way above my skill set.
TL;DR
Verizon Galaxy S7 will not connect to any Verizon Mobile Data Network and therefor will not activate but it will connect to data while roaming? Any and all suggestions, help or advice is appreciated! Even if it's just to tell me that the hardware is faulty and I need to replace the phone. I just need some opinions from the pros if possible. Thanks guys/gals.
Hey guys,
I bought the G950FD on eBay so that I could root and tweak it the way I always have with my previous phones. I use total wireless which is on Verizon towers and have gotten the phone to connect just like it should, text, receive/make calls, and use data. To do this, I used the Flashable CSC Collection here to switch the CSC to VZW and it worked for a while, but after restarting I started to get some problems that I can't sort out.
1. Calls do not work anymore - I can't make or receive them at all. Dialing a number just says "Dialing" with some zeros below it, and calling my number goes right to voicemail.2. Data cuts out sometimes and shows no signal. Recently, I tried to search for carriers and reconnect to Verizon but now I can't get a connection at all without restoring a backup.3. Other observations: Using a signal info app, it seems like I only see band 1 and it is usually very slow. CDMA obviously doesn't work, so maybe that's why I can't register on the network anymore, but why did it work when I first booted up? I can't change the APN settings after switching to VZW CSC and also can't see an option for VoLTE, but that must be working right? Only some ROMs seem to work with the VZW CSC and allow me to connect to the cell towers. Changing the network mode does not do anything and just reverts back to 2G, which doesn't make sense because 2G shouldn't be possible. None of the codes that can be entered into the dialer to run the activities have worked or helped at all. When connected to WiFi, the no signal bar shows 4G connectivity and the signal bars reappear but I am still not connected.
So, what can I try and does anyone have knowledge to share about cell towers, SIMs, registering on the network, or anything else relevant to my situation? I am completely stumped and would love any input that you guys could give me and future 950FD owners who might have this issue.
I'm looking forward to hearing what you guys know,
Joe
Only verizon phones work on verizon, you can't use a non-verizon phone on its network even if its supports its frequencies. Lte on your s8 is compatible with verizon's but after it worked for a bit they disabled your imei from their network, nothing you can do about it.
peachpuff said:
Only verizon phones work on verizon, you can't use a non-verizon phone on its network even if its supports its frequencies. Lte on your s8 is compatible with verizon's but after it worked for a bit they disabled your imei from their network, nothing you can do about it.
Click to expand...
Click to collapse
Thanks for the reply! I do not think they have blocked my IMEI because I just restored a backup and everything works again. I believe it has something to do with the settings on my phone or possibly a bug with Android/changing the CSC because changing the network settings cause crashes, disconnects, and other weird behavior.
peachpuff said:
Only verizon phones work on verizon, you can't use a non-verizon phone on its network even if its supports its frequencies. Lte on your s8 is compatible with verizon's but after it worked for a bit they disabled your imei from their network, nothing you can do about it.
Click to expand...
Click to collapse
Lol don't give misinformation, they don't do this, in fact I'm pretty sure forcing all users to have phones obtained through Verizon would be completely illegal for a Telco to do. VZW doesn't even know what type of phone you have unless you register it and even if you do they don't care.
I used prepaid T-Mobile from the first day that I had this phone and never had an issue with VoLTE. I decided to switch to AT&T prepaid for a month to try it out, and it wasn't very good in my area, so I decided to switch back. AT&T prepaid doesn't have the specific feature where LTE data service remains while on a voice call (I'm drawing a blank on what this is called at the moment), so I wasn't surprised when on AT&T's network that the phone would drop back to 2G for data service while on a voice call. However, after switching back to T-Mobile, the phone is still falling back to 2G while on voice calls. My girlfriend also has an S8 on T-Mobile and so I can verify that we can be on Band 12 and she can place a call and remain with LTE data while I fall back to 2G.
As for troubleshooting that I have done so far... The software did update when I put my T-Mobile SIMcard in and I verified the APN settings and that VoLTE is enabled. I also did a factory reset with the SIM card in the phone and it still did not work. At this point, I'm just looking for suggestions on what I could try next. I don't understand how a factory reset could have not fixed this. Any input from those knowledgeable about how the software updates for specific carriers modify the phone would be helpful. Thanks for the help.
Bump... Anyone have any ideas of what's I could try next?