Hi,
Oke i will save you most of the details which is normally not the best part but i think it doesn't matter how i got here anymore. Basically i tried to update my phone to nougat. So i installed TWRP. Before i could install that i had to unlock bootloader and my phone which i did. After that i succesfully installed TWRP and directly my problems started...
I couldnt get my phone booted into recovery. Finally after hours spending i managed to hook it up on the adb tools via the command line. Long story short, the only thing my phone does right now is boot, where i get the warning that my device is unlocked. If i do a normal boot, nothing happens, if i go to fastboot i can do nothing there because my PC doesn't see the device anymore. I cant use HiSuite to recover it because it shows me a warning that i dont have right for support. When i go to erecovery and connect to my wifi and recover the phone, the package info always fails.
So is there anything i can do to get my phone back to work? Because i am really out of options, somehow sometimes i managed to get into that "installing update" part but appearantly the file in my dload is not the right version so the update always fails.
What to do i? I am really about to smash my phone because i am so mad at myself that i bricked my dive :crying:
Try to get the right firmware for your device or if you remember your old one.
Flash stock recovery and then lock your bootloader also.
Put the firmware inside of your sd card and make a folder called 'dload' push the update.app there inside and make the 3 button way
Good luck.
And if its gonna end badly, Huawei have a VIP service which they will repair it for free IF it is still under warranty.
https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
Get correct firmware from this page & put update.app in dload folder
if you can boot into fastboot, the pc should be able to see it. have you tried looking into device manager to see if the driver is working?
anyway, if you were on stock marshmallow, you should be able use the 3 button combo to reflash the stock rom. after that the phone should be in factory state, with stock recovery and locked bootloader (eventhough in fastboot it still says unlocked).
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
GloryNation said:
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
Click to expand...
Click to collapse
tried to enter recovery, still not work. can't go to developer options because phone is stuck on logo, can't power off. couldn't find any solution that works anywhere, been searching for more than 6 hours, still no use. phone model is VNS-L21 forgot to mention earlier
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
GloryNation said:
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
Click to expand...
Click to collapse
I tried to install nougat update, computer recognizes it only in fastboot. holding volume buttons haven't changed anything still no progress. the thing is i had installed nougat a moth or so ago and it worked fine, then rolled back to marshmallow and now this. i'm pretty sure i tried to install correct package, because it was the same i had installed earlier
Did you download a adb tool on your computer that have the 'fastboot.exe' file? If so open that folder,
Have the mouse curser hover in that folder, hold down shift & right click the mouse
Open command prompt
Connect phone as is in fastboot mode
Type adb devices & press enter
Type adb continue & press enter
Hi,
I have the same issue as ellanyx.
my phone can only be stucked while booting or if I connect my phone to a computer, I'm able to boot it in fastboot.
as ellanyx, I didn't enable usb-debug nor OEM unlock option...
so when I'm in fastboot, I type the command "fastboot oem unlock xxxxxx" (hopefully the different data needed are the correct ones mentioned on the box of the phone) I get this error message:
C:\Users\Dieu\Downloads\SRKToolHuawei-STABLE-V1.3-20160619>fastboot oem unlock xxxxx
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
and off course the other options like "fastboot flash recovery recovery.img "... doesn't work.
I can't use the adb commands neither.
when I type the commande, as mentioned above, "adb devices" or "adb continue", nothing works.
So I'm a bit desesperate
do you have any solution for this kind of issue?
thanks
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
pyromana said:
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
Click to expand...
Click to collapse
Probably you didnt have correct Oeminfo for MM if dload method didnt work....Try to conect phone with Toolkit and follow procedure for flashing oeminfo and custombin, after that flash stock recovrry and b161 via dload metod. You will find it on forum here.
Regards
the procedure from SRK toolkit?
would it be possible to provide it? because I can't unlock the OEM and I didn't tick the USB debug think.
Maybe problem with the ps not phone so u can not connect with adb
Try with different pc you must have flash oem with fast boot without enable adb from phone if u in fastboot
I can only boot my phone in fastboot (vol- + power) and not in recovery (vol+ + power).
also when using the SRK toolkit, the first screen tells me to be sure that the usb debugging is enable, which I haven't done...
if I'm not mistaken, fastboot is to use the fastboot command and recovery the adb commands
the connection with fastboot works on my computer, the link is made. however when I type the command to unlock the OEM, I get an error stating that the command is not allowed.
when I use the SRK toolkit, with the different questions, he tries to connect the phone with adb and waiting.... waiting...
is there a command to reboot in recovery but from fastboot? in the otherway around it exists but it doesn't seem that from fastboot to recovery it exists.
thanks.
Alexxxx1 said:
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Click to expand...
Click to collapse
dload method works on N. I downgraded my phone from unofficial N update back to official MM update using this method yesterday. You just have to enable OEM at developer options on settings.
It looks like people can't be bothered to read the 1st post properly before they reply.
HE CAN NOT BOOT TO ANDROID SO HE CAN NOT ENABLE OEM OR ACTIVATE USB DEBUGGING!!!!
What he CAN do, is go into eRecovery and Fastboot.
With that in mind, I would suggest using the dload method through fastboot.
Also, make sure it is Huawei SRK Tools 2.0 that is used, as it actually asks if you are in debug mode or fastboot.
Note that there is a few bugs in SRK 2.0:
The TWRP recovery file has the wrong filename in the package, so it WILL fail unless you name it correctly.
Also, when trying to root, do NOT use the "P9 Lite" method as that WILL fail too. Use the "P9/P9 Plus" method.
I am trying to set up a complete guide that can restore the phone when it is stuck in fastboot, however I apparently went a step too far...
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken[/QUOTE
Do you have TWRP recovery ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:50 AM ----------
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
Click to expand...
Click to collapse
Boot into fastboot mode and flash a custom recovery by meticulus. Link : meticulus.co.vu
Then whenyou get stuck hold power and vol down button for 2 minutes the phone will reboot and then when it says that your device has been unlocked and cant be trusted then only press vol up key ( dont press power button then). The u get into huawei recovery. From that u should power off the phone. Now get a custom rom by meticulus into your device sd card ( Cyanogenmod 13 is recommended ). Then insert sd card in a powered off phone. Now press vol up and power key and flash gapps and custom rom and you are good to go.
Click to expand...
Click to collapse
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
SnowmanDK said:
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
Click to expand...
Click to collapse
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Arsaam said:
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Click to expand...
Click to collapse
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
SnowmanDK said:
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
Click to expand...
Click to collapse
Go to fast boot mode and from their try to flash meticulus recovery.
You can also try the adb method as well.
Visit meticulus.co.vu
hello there! well....a couple of things....im usually pretty clued up with flashing etc.....but with the p10 plus.....i am severely struggling....can anyone help
after downloading updates with firmware finder etc..... i have tried flashing with the dload and hwota ways, even tried using DC phoenix and the other DC program (where i spent 15 credits to get bootloader unlock code.....but errors.....
basically, when i first got the phone a week ago, I unlocked bootloader, twrp, and genesis rom, everything is super......and this is where i messed up
:crying::crying: after flashing or trying to flash firmware (it always says failed when you do the three button thing after 5%) as i was going to get a s8........
but now i want to keep the p10 plus, but instead of TWRP, i now have e recovery, but i can still boot into fastboot.......but........
the phone does not boot into the main phone set up......it just gives a screen with red writing, and something about the phone malfunctioned.......
whn i look through lots of posts, it says 'Unlocked Bootloader only' , problems is, now my phone says 'Bootloader : Locked'
Although I used the bootloader unlock tool and got a code before, I cant get my product id again as phone wont boot up, or somehow retrieve my unlock code from earlier, i was silly enough not to jot anything down!!!! am i screwed??????? help!!!!! @Blackball you are the daddy when it comes to p10 plus....can you help?
help!!!!!!!!!!!!!!!!
Did you tried this?
https://forum.xda-developers.com/showthread.php?t=3593108
Hello,
I have a Huawei P8 Lite (ALE-L21) phone with this error: FUNC 8 : HIFI Image, Error 1 Security Verify failed. I think I have tried everything to fix it but had no success, hence why I have decided to create this thread.
As you can figure out, the phone does not turn on, it only shows the huawei logo and shuts down. When pressing VOLUME UP + DOWN and POWER button, it used to show the HIFI image error screen, however when I press the key combination now, it only shows a red screen and turns off. I am able to enter fastboot and rescue mode by holding down the VOLUME DOWN button and plugging in a USB cable to the phone from a computer. Apart from that, I can't do anything else with the phone. (I do not have any software related to the phone installed (HiSuite), no backups, no nothing because the phone actually isn't mine and I have never actually played with it and androids in general.)
There are some similar threads and videos here:
https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-fastbootrescue-mode-t3648105
https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-screen-please-help-t3244872
https://forum.xda-developers.com/mate-10/how-to/how-to-huawei-mate-10-pro-standard-t3709535
https://forum.xda-developers.com/honor-5c/help/writing-recovery-failed-remote-command-t3584208
https://forum.xda-developers.com/p8lite/help/huawei-p8-blinks-red-green-green-red-t3546038
https://youtu.be/UYmDBD7t1iM
I have tried a lot of things to make the phone work again but nothing worked.
Recovery mode using HiSuite - "Your device is not supported for system recovery"
I have tried flashing different ROM's using fastboot - when I try flashing it says "FAILED - command not allowed", which I assume is beacuse the bootloader is locked?
installing a ROM using a SD card (Force update or something) - the red screen shows and the phone shuts down
Huawei Update Extractor - updating specific files e.g. boot.img, still not allowed to flash
TWRP - the same error ( not allowed )
Rollback to the previous versions using fastboot - not allowed
At some point I was able to wipe the cache on the phone, not sure if that matters anyhow.
When I am in the fastboot & rescue mode, there is a text in green saying "Phone LOCKED", which I assume means that the bootloader is locked? So, I was trying to get the bootloader unlocked, however found no success. I have also tried emailing Huawei support to get the bootloader code, however as you may know, they did not want to provide the code.
I was able to extract some information from the phone though, using these commands: https://forum.xda-developers.com/showpost.php?p=70483520&postcount=2
To get the bootloader code I have tried:
dc-unlocker - I think you need a working phone and have usb drivers installed for this to work and also I think you have to pay for this service
Kingroot + fastboot - https://forum.xda-developers.com/p8lite/general/alternative-method-unlocking-bootloader-t3799294
Emailing Huawei support for the code - they don't want to provide one
https://forum.xda-developers.com/huawei-p8/help/bootloader-unlock-unlock-code-huawei-t3792987
Does anyone have any suggestions on how to resolve the problem, or is it unsolvable? I would prefer to do it myself and not send the phone to Huawei or whoever as I would like to spend the least money possible. Also the warranty is long gone, since the phone has been bought in 2015.
Cheers
I have same issue, please anybody help
Exact same problem here, any help would be great.
Hi!
I have a problem with an M2 that I am trying to recover. I don't know what exactly happened, but who gave it to me said they found it one morning stuck with the MIUI logo, and then turn it off and on again finding this error ... I'm afraid that the update process was interrupted, but usually the phone not start updating without asking.
The phone only goes in Fastboot, no recovery, has the bootloader locked and unfortunately an associated MI account was not made.
I have tried everything I found online, but I have not succeeded to flash on it anything or unlocking the bootloader.
If I use the command fastboot devices it is recognized, same in Mi Flash, but having the bootloader locked it does not flash anything.
I was unable to put it in EDL mode, as some advised.
Is there anything I can do or the only way is to take it to a service center?
Thanks for your help
Oh sorry, I think I got the wrong section by mistake.
If it was to be put in POCO M3 Questions & Answers I kindly ask if you can move it, thanks